Djam/arm-trusted-firmware
1
0
Fork 0
mirror of https://github.com/ARM-software/arm-trusted-firmware.git synced 2025-04-17 10:04:26 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
arm-trusted-firmware/plat/arm/board/tc/platform.mk
Boyan Karatotev 3ac3b6b0a3 refactor(tc): unify all the spmc manifests 
The manifests describe the same hardware layout with only the secure
partitions being different. Factor it out so it can be shared and only
add the VM information separately.

This has some deliberate side effects: the test configuration gets the
full secure memory address space and drops the 0x7000000 region as that
was accidentally copied over from the FVP platform and doesn't apply to
TC.

Also optee unconditionally gets the smaller mem_size as it's been
working fine and simplifies the manifest.

Small touch up is that mem_size-s are now in hex but otherwise the same
number.

Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Iea23f9769235eea32afa374952b9a0e4f6d3e9a1
2024-02-23 16:11:47 +00:00

207 lines
5.9 KiB
Makefile
Raw Blame History

# Copyright (c) 2021-2024, Arm Limited. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
include common/fdt_wrappers.mk
ifeq ($(TARGET_PLATFORM), 0)
$(error Platform ${PLAT}$(TARGET_PLATFORM) is deprecated.)
endif
ifeq ($(TARGET_PLATFORM), 1)
$(warning Platform ${PLAT}$(TARGET_PLATFORM) is deprecated. \
Some of the features might not work as expected)
endif
ifeq ($(shell expr $(TARGET_PLATFORM) \<= 2), 0)
$(error TARGET_PLATFORM must be less than or equal to 2)
endif
$(eval $(call add_define,TARGET_PLATFORM))
CSS_LOAD_SCP_IMAGES := 1
CSS_USE_SCMI_SDS_DRIVER := 1
ENABLE_FEAT_RAS := 1
SDEI_SUPPORT := 0
EL3_EXCEPTION_HANDLING := 0
HANDLE_EA_EL3_FIRST_NS := 0
# System coherency is managed in hardware
HW_ASSISTED_COHERENCY := 1
# When building for systems with hardware-assisted coherency, there's no need to
# use USE_COHERENT_MEM. Require that USE_COHERENT_MEM must be set to 0 too.
USE_COHERENT_MEM := 0
GIC_ENABLE_V4_EXTN := 1
# GIC-600 configuration
GICV3_SUPPORT_GIC600 := 1
# Enable SVE
ENABLE_SVE_FOR_NS := 2
ENABLE_SVE_FOR_SWD := 1
# enable trace buffer control registers access to NS by default
ENABLE_TRBE_FOR_NS := 1
# enable trace system registers access to NS by default
ENABLE_SYS_REG_TRACE_FOR_NS := 1
# enable trace filter control registers access to NS by default
ENABLE_TRF_FOR_NS := 1
# Include GICv3 driver files
include drivers/arm/gic/v3/gicv3.mk
ENT_GIC_SOURCES := ${GICV3_SOURCES} \
plat/common/plat_gicv3.c \
plat/arm/common/arm_gicv3.c
override NEED_BL2U := no
override ARM_PLAT_MT := 1
TC_BASE = plat/arm/board/tc
PLAT_INCLUDES += -I${TC_BASE}/include/ \
-I${TC_BASE}/fdts/
# CPU libraries for TARGET_PLATFORM=1
ifeq (${TARGET_PLATFORM}, 1)
TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a510.S \
lib/cpus/aarch64/cortex_a715.S \
lib/cpus/aarch64/cortex_x3.S
endif
# CPU libraries for TARGET_PLATFORM=2
ifeq (${TARGET_PLATFORM}, 2)
TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a520.S \
lib/cpus/aarch64/cortex_a720.S \
lib/cpus/aarch64/cortex_x4.S
endif
INTERCONNECT_SOURCES := ${TC_BASE}/tc_interconnect.c
PLAT_BL_COMMON_SOURCES += ${TC_BASE}/tc_plat.c \
${TC_BASE}/include/tc_helpers.S
BL1_SOURCES += ${INTERCONNECT_SOURCES} \
${TC_CPU_SOURCES} \
${TC_BASE}/tc_trusted_boot.c \
${TC_BASE}/tc_err.c \
drivers/arm/sbsa/sbsa.c
BL2_SOURCES += ${TC_BASE}/tc_security.c \
${TC_BASE}/tc_err.c \
${TC_BASE}/tc_trusted_boot.c \
${TC_BASE}/tc_bl2_setup.c \
lib/utils/mem_region.c \
drivers/arm/tzc/tzc400.c \
plat/arm/common/arm_tzc400.c \
plat/arm/common/arm_nor_psci_mem_protect.c
BL31_SOURCES += ${INTERCONNECT_SOURCES} \
${TC_CPU_SOURCES} \
${ENT_GIC_SOURCES} \
${TC_BASE}/tc_bl31_setup.c \
${TC_BASE}/tc_topology.c \
lib/fconf/fconf.c \
lib/fconf/fconf_dyn_cfg_getter.c \
drivers/cfi/v2m/v2m_flash.c \
lib/utils/mem_region.c \
plat/arm/common/arm_nor_psci_mem_protect.c \
drivers/arm/sbsa/sbsa.c
BL31_SOURCES += ${FDT_WRAPPERS_SOURCES}
# Add the FDT_SOURCES and options for Dynamic Config
FDT_SOURCES += ${TC_BASE}/fdts/${PLAT}_fw_config.dts \
${TC_BASE}/fdts/${PLAT}_tb_fw_config.dts
FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
# Add the FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config,${FW_CONFIG}))
# Add the TB_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config,${TB_FW_CONFIG}))
ifeq (${SPD},spmd)
ifeq ($(ARM_SPMC_MANIFEST_DTS),)
ARM_SPMC_MANIFEST_DTS := ${TC_BASE}/fdts/${PLAT}_spmc_test_manifest.dts
endif
FDT_SOURCES += ${ARM_SPMC_MANIFEST_DTS}
TC_TOS_FW_CONFIG := ${BUILD_PLAT}/fdts/$(notdir $(basename ${ARM_SPMC_MANIFEST_DTS})).dtb
# Add the TOS_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TC_TOS_FW_CONFIG},--tos-fw-config,${TC_TOS_FW_CONFIG}))
endif
#Device tree
TC_HW_CONFIG_DTS := fdts/tc.dts
TC_HW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}.dtb
FDT_SOURCES += ${TC_HW_CONFIG_DTS}
$(eval TC_HW_CONFIG := ${BUILD_PLAT}/$(patsubst %.dts,%.dtb,$(TC_HW_CONFIG_DTS)))
# Add the HW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TC_HW_CONFIG},--hw-config,${TC_HW_CONFIG}))
override CTX_INCLUDE_AARCH32_REGS := 0
override CTX_INCLUDE_PAUTH_REGS := 1
override ENABLE_SPE_FOR_NS := 0
override ENABLE_FEAT_AMU := 1
ENABLE_AMU_AUXILIARY_COUNTERS := 1
ENABLE_AMU_FCONF := 1
ENABLE_MPMM := 1
ENABLE_MPMM_FCONF := 1
# Include Measured Boot makefile before any Crypto library makefile.
# Crypto library makefile may need default definitions of Measured Boot build
# flags present in Measured Boot makefile.
ifeq (${MEASURED_BOOT},1)
MEASURED_BOOT_MK := drivers/measured_boot/rss/rss_measured_boot.mk
$(info Including ${MEASURED_BOOT_MK})
include ${MEASURED_BOOT_MK}
$(info Including rss_comms.mk)
include drivers/arm/rss/rss_comms.mk
BL1_SOURCES += ${MEASURED_BOOT_SOURCES} \
plat/arm/board/tc/tc_common_measured_boot.c \
plat/arm/board/tc/tc_bl1_measured_boot.c \
lib/psa/measured_boot.c \
${RSS_COMMS_SOURCES}
BL2_SOURCES += ${MEASURED_BOOT_SOURCES} \
plat/arm/board/tc/tc_common_measured_boot.c \
plat/arm/board/tc/tc_bl2_measured_boot.c \
lib/psa/measured_boot.c \
${RSS_COMMS_SOURCES}
PLAT_INCLUDES += -Iinclude/lib/psa
endif
ifneq (${PLATFORM_TEST},)
# Add this include as first, before arm_common.mk. This is necessary
# because arm_common.mk builds Mbed TLS, and platform_test.mk can
# change the list of Mbed TLS files that are to be compiled
# (LIBMBEDTLS_SRCS).
include plat/arm/board/tc/platform_test.mk
endif
include plat/arm/common/arm_common.mk
include plat/arm/css/common/css_common.mk
include plat/arm/soc/common/soc_css.mk
include plat/arm/board/common/board_common.mk
Reference in a new issue View git blame Copy permalink