arm-trusted-firmware/plat/imx/imx8ulp/platform.mk
Jacky Bai e1d5c3c8f4 fix(imx8ulp): add sw workaround for csi/hotplug test hang
When doing CSI stress test after cpu hotplug, sometimes, system
will hang in CSI test. After some debug, we find that if slow
down the APD NIC frequency before power on the offline CPU,
the issue is gone. For now, just add such SW workaround.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Change-Id: I39a49efc382fbebf46e1ff15c93d506bd5f6bec1
2024-02-27 14:29:54 +08:00

69 lines
2 KiB
Makefile

#
# Copyright 2021-2024 NXP
#
# SPDX-License-Identifier: BSD-3-Clause
#
# Translation tables library
include lib/xlat_tables_v2/xlat_tables.mk
# Include GICv3 driver files
include drivers/arm/gic/v3/gicv3.mk
PLAT_INCLUDES := -Iplat/imx/imx8ulp/include \
-Iplat/imx/common/include \
-Iplat/imx/imx8ulp/upower
IMX_GIC_SOURCES := ${GICV3_SOURCES} \
plat/common/plat_gicv3.c \
plat/common/plat_psci_common.c \
plat/imx/common/plat_imx8_gic.c
BL31_SOURCES += plat/imx/common/lpuart_console.S \
plat/imx/common/imx8_helpers.S \
plat/imx/imx8ulp/imx8ulp_bl31_setup.c \
plat/imx/imx8ulp/imx8ulp_psci.c \
plat/imx/imx8ulp/apd_context.c \
plat/imx/common/imx8_topology.c \
plat/imx/common/imx_sip_svc.c \
plat/imx/common/imx_sip_handler.c \
plat/imx/common/imx_bl31_common.c \
plat/common/plat_psci_common.c \
lib/cpus/aarch64/cortex_a35.S \
drivers/delay_timer/delay_timer.c \
drivers/delay_timer/generic_delay_timer.c \
plat/imx/imx8ulp/xrdc/xrdc_core.c \
plat/imx/imx8ulp/imx8ulp_caam.c \
plat/imx/imx8ulp/dram.c \
drivers/scmi-msg/base.c \
drivers/scmi-msg/entry.c \
drivers/scmi-msg/smt.c \
drivers/scmi-msg/power_domain.c \
drivers/scmi-msg/sensor.c \
plat/imx/imx8ulp/scmi/scmi.c \
plat/imx/imx8ulp/scmi/scmi_pd.c \
plat/imx/imx8ulp/scmi/scmi_sensor.c \
plat/imx/imx8ulp/upower/upower_api.c \
plat/imx/imx8ulp/upower/upower_hal.c \
${XLAT_TABLES_LIB_SRCS} \
${IMX_GIC_SOURCES}
ifeq ($(findstring clang,$(notdir $(CC))),)
TF_CFLAGS_aarch64 += -fno-strict-aliasing
endif
USE_COHERENT_MEM := 1
RESET_TO_BL31 := 1
SEPARATE_NOBITS_REGION := 1
SEPARATE_RWDATA_REGION := 1
PROGRAMMABLE_RESET_ADDRESS := 1
COLD_BOOT_SINGLE_CPU := 1
WARMBOOT_ENABLE_DCACHE_EARLY := 1
BL32_BASE ?= 0xa6000000
BL32_SIZE ?= 0x2000000
$(eval $(call add_define,BL32_BASE))
$(eval $(call add_define,BL32_SIZE))
ifeq (${SPD},trusty)
BL31_CFLAGS += -DPLAT_XLAT_TABLES_DYNAMIC=1
endif