mirror of
https://github.com/ARM-software/arm-trusted-firmware.git
synced 2025-04-08 05:43:53 +00:00
09d40e0e08
Enforce full include path for includes. Deprecate old paths.
The following folders inside include/lib have been left unchanged:
- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}
The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).
For example, this patch had to be created because two headers were
called the same way: e0ea0928d5 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a2 ("drivers: add tzc380 support").
This problem was introduced in commit 4ecca33988 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.
Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.
Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
269 lines
7.5 KiB
ArmAsm
269 lines
7.5 KiB
ArmAsm
/*
|
|
* Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
#include <arch.h>
|
|
#include <asm_macros.S>
|
|
#include <assert_macros.S>
|
|
#define USE_FINISH_CONSOLE_REG_2
|
|
#include <console_macros.S>
|
|
#include <drivers/arm/pl011.h>
|
|
|
|
#if !MULTI_CONSOLE_API
|
|
/*
|
|
* Pull in generic functions to provide backwards compatibility for
|
|
* platform makefiles
|
|
*/
|
|
#include "../../../console/aarch64/console.S"
|
|
#endif
|
|
|
|
/*
|
|
* "core" functions are low-level implementations that don't require
|
|
* writable memory and are thus safe to call in BL1 crash context.
|
|
*/
|
|
.globl console_pl011_core_init
|
|
.globl console_pl011_core_putc
|
|
.globl console_pl011_core_getc
|
|
.globl console_pl011_core_flush
|
|
|
|
.globl console_pl011_putc
|
|
.globl console_pl011_getc
|
|
.globl console_pl011_flush
|
|
|
|
/* -----------------------------------------------
|
|
* int console_pl011_core_init(uintptr_t base_addr,
|
|
* unsigned int uart_clk, unsigned int baud_rate)
|
|
* Function to initialize the console without a
|
|
* C Runtime to print debug information. This
|
|
* function will be accessed by console_init and
|
|
* crash reporting.
|
|
* In: x0 - console base address
|
|
* w1 - Uart clock in Hz
|
|
* w2 - Baud rate
|
|
* Out: return 1 on success else 0 on error
|
|
* Clobber list : x1, x2, x3, x4
|
|
* -----------------------------------------------
|
|
*/
|
|
func console_pl011_core_init
|
|
/* Check the input base address */
|
|
cbz x0, core_init_fail
|
|
#if !PL011_GENERIC_UART
|
|
/* Check baud rate and uart clock for sanity */
|
|
cbz w1, core_init_fail
|
|
cbz w2, core_init_fail
|
|
/* Disable uart before programming */
|
|
ldr w3, [x0, #UARTCR]
|
|
mov w4, #PL011_UARTCR_UARTEN
|
|
bic w3, w3, w4
|
|
str w3, [x0, #UARTCR]
|
|
/* Program the baudrate */
|
|
/* Divisor = (Uart clock * 4) / baudrate */
|
|
lsl w1, w1, #2
|
|
udiv w2, w1, w2
|
|
/* IBRD = Divisor >> 6 */
|
|
lsr w1, w2, #6
|
|
/* Write the IBRD */
|
|
str w1, [x0, #UARTIBRD]
|
|
/* FBRD = Divisor & 0x3F */
|
|
and w1, w2, #0x3f
|
|
/* Write the FBRD */
|
|
str w1, [x0, #UARTFBRD]
|
|
mov w1, #PL011_LINE_CONTROL
|
|
str w1, [x0, #UARTLCR_H]
|
|
/* Clear any pending errors */
|
|
str wzr, [x0, #UARTECR]
|
|
/* Enable tx, rx, and uart overall */
|
|
mov w1, #(PL011_UARTCR_RXE | PL011_UARTCR_TXE | PL011_UARTCR_UARTEN)
|
|
str w1, [x0, #UARTCR]
|
|
#endif
|
|
mov w0, #1
|
|
ret
|
|
core_init_fail:
|
|
mov w0, wzr
|
|
ret
|
|
endfunc console_pl011_core_init
|
|
|
|
#if MULTI_CONSOLE_API
|
|
.globl console_pl011_register
|
|
|
|
/* -----------------------------------------------
|
|
* int console_pl011_register(uintptr_t baseaddr,
|
|
* uint32_t clock, uint32_t baud,
|
|
* console_pl011_t *console);
|
|
* Function to initialize and register a new PL011
|
|
* console. Storage passed in for the console struct
|
|
* *must* be persistent (i.e. not from the stack).
|
|
* In: x0 - UART register base address
|
|
* w1 - UART clock in Hz
|
|
* w2 - Baud rate
|
|
* x3 - pointer to empty console_pl011_t struct
|
|
* Out: return 1 on success, 0 on error
|
|
* Clobber list : x0, x1, x2, x6, x7, x14
|
|
* -----------------------------------------------
|
|
*/
|
|
func console_pl011_register
|
|
mov x7, x30
|
|
mov x6, x3
|
|
cbz x6, register_fail
|
|
str x0, [x6, #CONSOLE_T_PL011_BASE]
|
|
|
|
bl console_pl011_core_init
|
|
cbz x0, register_fail
|
|
|
|
mov x0, x6
|
|
mov x30, x7
|
|
finish_console_register pl011 putc=1, getc=1, flush=1
|
|
|
|
register_fail:
|
|
ret x7
|
|
endfunc console_pl011_register
|
|
#else
|
|
.globl console_core_init
|
|
.globl console_core_putc
|
|
.globl console_core_getc
|
|
.globl console_core_flush
|
|
.equ console_core_init,console_pl011_core_init
|
|
.equ console_core_putc,console_pl011_core_putc
|
|
.equ console_core_getc,console_pl011_core_getc
|
|
.equ console_core_flush,console_pl011_core_flush
|
|
#endif
|
|
|
|
/* --------------------------------------------------------
|
|
* int console_pl011_core_putc(int c, uintptr_t base_addr)
|
|
* Function to output a character over the console. It
|
|
* returns the character printed on success or -1 on error.
|
|
* In : w0 - character to be printed
|
|
* x1 - console base address
|
|
* Out : return -1 on error else return character.
|
|
* Clobber list : x2
|
|
* --------------------------------------------------------
|
|
*/
|
|
func console_pl011_core_putc
|
|
#if ENABLE_ASSERTIONS
|
|
cmp x1, #0
|
|
ASM_ASSERT(ne)
|
|
#endif /* ENABLE_ASSERTIONS */
|
|
|
|
/* Prepend '\r' to '\n' */
|
|
cmp w0, #0xA
|
|
b.ne 2f
|
|
1:
|
|
/* Check if the transmit FIFO is full */
|
|
ldr w2, [x1, #UARTFR]
|
|
tbnz w2, #PL011_UARTFR_TXFF_BIT, 1b
|
|
mov w2, #0xD
|
|
str w2, [x1, #UARTDR]
|
|
2:
|
|
/* Check if the transmit FIFO is full */
|
|
ldr w2, [x1, #UARTFR]
|
|
tbnz w2, #PL011_UARTFR_TXFF_BIT, 2b
|
|
str w0, [x1, #UARTDR]
|
|
ret
|
|
endfunc console_pl011_core_putc
|
|
|
|
/* --------------------------------------------------------
|
|
* int console_pl011_putc(int c, console_pl011_t *console)
|
|
* Function to output a character over the console. It
|
|
* returns the character printed on success or -1 on error.
|
|
* In : w0 - character to be printed
|
|
* x1 - pointer to console_t structure
|
|
* Out : return -1 on error else return character.
|
|
* Clobber list : x2
|
|
* --------------------------------------------------------
|
|
*/
|
|
func console_pl011_putc
|
|
#if ENABLE_ASSERTIONS
|
|
cmp x1, #0
|
|
ASM_ASSERT(ne)
|
|
#endif /* ENABLE_ASSERTIONS */
|
|
ldr x1, [x1, #CONSOLE_T_PL011_BASE]
|
|
b console_pl011_core_putc
|
|
endfunc console_pl011_putc
|
|
|
|
/* ---------------------------------------------
|
|
* int console_pl011_core_getc(uintptr_t base_addr)
|
|
* Function to get a character from the console.
|
|
* It returns the character grabbed on success
|
|
* or -1 if no character is available.
|
|
* In : x0 - console base address
|
|
* Out: w0 - character if available, else -1
|
|
* Clobber list : x0, x1
|
|
* ---------------------------------------------
|
|
*/
|
|
func console_pl011_core_getc
|
|
#if ENABLE_ASSERTIONS
|
|
cmp x0, #0
|
|
ASM_ASSERT(ne)
|
|
#endif /* ENABLE_ASSERTIONS */
|
|
|
|
/* Check if the receive FIFO is empty */
|
|
ldr w1, [x0, #UARTFR]
|
|
tbnz w1, #PL011_UARTFR_RXFE_BIT, no_char
|
|
ldr w1, [x0, #UARTDR]
|
|
mov w0, w1
|
|
ret
|
|
no_char:
|
|
mov w0, #ERROR_NO_PENDING_CHAR
|
|
ret
|
|
endfunc console_pl011_core_getc
|
|
|
|
/* ---------------------------------------------
|
|
* int console_pl011_getc(console_pl011_t *console)
|
|
* Function to get a character from the console.
|
|
* It returns the character grabbed on success
|
|
* or -1 if no character is available.
|
|
* In : x0 - pointer to console_t structure
|
|
* Out: w0 - character if available, else -1
|
|
* Clobber list : x0, x1
|
|
* ---------------------------------------------
|
|
*/
|
|
func console_pl011_getc
|
|
#if ENABLE_ASSERTIONS
|
|
cmp x0, #0
|
|
ASM_ASSERT(ne)
|
|
#endif /* ENABLE_ASSERTIONS */
|
|
ldr x0, [x0, #CONSOLE_T_PL011_BASE]
|
|
b console_pl011_core_getc
|
|
endfunc console_pl011_getc
|
|
|
|
/* ---------------------------------------------
|
|
* int console_pl011_core_flush(uintptr_t base_addr)
|
|
* Function to force a write of all buffered
|
|
* data that hasn't been output.
|
|
* In : x0 - console base address
|
|
* Out : return -1 on error else return 0.
|
|
* Clobber list : x0, x1
|
|
* ---------------------------------------------
|
|
*/
|
|
func console_pl011_core_flush
|
|
#if ENABLE_ASSERTIONS
|
|
cmp x0, #0
|
|
ASM_ASSERT(ne)
|
|
#endif /* ENABLE_ASSERTIONS */
|
|
1:
|
|
/* Loop until the transmit FIFO is empty */
|
|
ldr w1, [x0, #UARTFR]
|
|
tbnz w1, #PL011_UARTFR_BUSY_BIT, 1b
|
|
|
|
mov w0, #0
|
|
ret
|
|
endfunc console_pl011_core_flush
|
|
|
|
/* ---------------------------------------------
|
|
* int console_pl011_flush(console_pl011_t *console)
|
|
* Function to force a write of all buffered
|
|
* data that hasn't been output.
|
|
* In : x0 - pointer to console_t structure
|
|
* Out : return -1 on error else return 0.
|
|
* Clobber list : x0, x1
|
|
* ---------------------------------------------
|
|
*/
|
|
func console_pl011_flush
|
|
#if ENABLE_ASSERTIONS
|
|
cmp x0, #0
|
|
ASM_ASSERT(ne)
|
|
#endif /* ENABLE_ASSERTIONS */
|
|
ldr x0, [x0, #CONSOLE_T_PL011_BASE]
|
|
b console_pl011_core_flush
|
|
endfunc console_pl011_flush
|