Add support for Morello I2S audio subsystem. This includes adding the
audio formatter and I2S transmitter nodes and gluing them together with
the hdmi codec using a simple sound card machine node.
Change-Id: I3de4b06ef965c8e0555d074118b944fe6b4b78bb
Signed-off-by: Anurag Koul <anurag.koul@arm.com>
Signed-off-by: Faiz Abbas <faiz.abbas@arm.com>
The #address-cells and #size-cells properties affect the size of reg
properties in *child* nodes only, they have no effect on the current
node.
The /memory node has no children, hence there is no need to specify
those properties. dt-validate complains about this:
==========
morello-soc.dtb: /: memory@80000000: '#address-cells', '#size-cells' do
not match any of the regexes: 'pinctrl-[0-9]+'
From schema: dt-schema.git/dtschema/schemas/memory.yaml
==========
Remove the unneeded properties.
Change-Id: I35058a00fa9bfa1007f31a4c21898dd45c586aa8
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The various official DT bindings only allow certain node name patterns.
Linux' "make dtbs_check" reports:
===========
.../morello-soc.dt.yaml: sram@45200000: 'scp-shmem@0', 'scp-shmem@80' do not match any of the regexes: '^([a-z0-9]*-)?sram(-section)?@[a-f0-9]+$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/sram/sram.yaml
.../morello-soc.dt.yaml: uart@2a400000: $nodename:0: 'uart@2a400000' does not match '^serial(@.*)?$'
From schema: Documentation/devicetree/bindings/serial/pl011.yaml
.../morello-soc.dt.yaml: interrupt-controller@2c010000: 'its@30040000', 'its@30060000', 'its@30080000', 'its@300a0000' do not match any of the regexes: '^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$', '^gic-its@', '^interrupt-controller@[0-9a-f]+$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
===========
Rename the node names to improve bindings compliance.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ieff576512853eb2bf932c7a2b338c91e0c116b87
The official Arm MHU DT binding suggests to group the shmem (and mboxes)
values to signify the number of mailboxes supported.
Linux' "make dtbs_check" reports:
============
.../morello-soc.dt.yaml: scmi: shmem:0: [17, 18] is too long
From schema: dt-schema.git/dtschema/schemas/mbox/mbox-consumer.yaml
============
Add angle brackets at the right location to mark the boundaries between
the two mailbox instances used.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: If585c98b5e8e55cd5c0b1261e03ce4b91a4c0413
The official Arm Komeda DPU DT binding only mentions the "arm,mali-d71"
string as a possible compatible string. The D32 version is just a
variant of the D71, and the revision can and will be auto-detected at
runtime.
Add the usual fallback compatible string scheme to contain a documented
compatible string.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ic1eade122b030dc983944b161eec175facf75357
The official SMMUv3 DT bindings require a certain order of the
interrupts, Linux' "make dtbs_check" reports:
============
.../morello-soc.dt.yaml: iommu@2ce00000: interrupt-names: 'oneOf' conditional failed, one must be fixed:
['eventq', 'cmdq-sync', 'gerror'] is too long
'combined' was expected
'gerror' was expected
'priq' was expected
'cmdq-sync' was expected
From schema: Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
============
Swap the order of the interrupts to improve bindings compliance.
Actually in this case the binding needs to be extended, since PRI is not
implemented in the SMMU in this case, so the PRI IRQ should be optional,
but we still want to describe the CMDQ sync IRQ. A patch for the binding
is pending.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: I3978f1c087136cd4c2e8f7fd4d1bba5b95f72726
The official SMMUv3 DT bindings require a certain order of the
interrupts, Linux' "make dtbs_check" reports:
============
.../morello-soc.dt.yaml: iommu@4f400000: interrupt-names: 'oneOf' conditional failed, one must be fixed:
['eventq', 'priq', 'cmdq-sync', 'gerror'] is too long
'combined' was expected
'gerror' was expected
'priq' was expected
'cmdq-sync' was expected
From schema: Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
============
Swap the order of the interrupt-names and their corresponding interrupts
values to improve bindings compliance.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: I2110b8509593a4f1aadff11bd518ec4a0f3f5d3c
The core root node DT bindings require every DT to have a "model"
property. Linux' "make dtbs_check" reports:
============
.../morello-soc.dt.yaml: /: 'model' is a required property
From schema: dt-schema.git/dtschema/schemas/root-node.yaml
============
Add a model name to both the SoC and FVP files to improve bindings
compliance.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: I64923edb947f8939dfa24c13a37996b1ba34ea54
According to the DT spec, stdout-path must either start with the full
path to a node, or with an alias.
"soc_uart0" is neither of them, and consequently the Linux kernel
complains that it cannot find the root console device when just given
"earlycon" on the kernel command line:
===========
[ 0.000000] OF: fdt: earlycon: stdout-path soc_uart0 not found
===========
Use the already defined "serial0" alias to fix this and make "earlycon"
work in Linux.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ie0ddb1909160c930af3831246f0140363bc0b5db
Add 'firmware' node in morello-soc.dts to expose SCMI
support to the kernel. The SCMI protocols supported at
the moment are SCMI Base, Clock and Perf (DVFS).
The current mailbox memory region in MHU SRAM has an issue
with any access not aligned to a 4-byte boundary. So, the SCMI
mailbox memory region has been relocated to AP non-trusted
RAM to get around the problem.
Signed-off-by: Anurag Koul <anurag.koul@arm.com>
Change-Id: Ibcbce8823b751a0fc3be7e9bc3588c1dc47ae024
