One of the uSDHC module's clock lines is attached to the CGM_MUX 14
divider, which is connected to PERIPH_DFS3. The other one is attached
to XBAR_DIV3.
Change-Id: I23f468a3e5f7daa832c0841b55211a048284a7f0
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Replace the dummy implementation of clk_ops.get_rate with a basic
version that only handles the oscillator objects. Subsequent commits
will add more objects to this list.
Change-Id: I8c1bbbfa6b116fdcf5a1f1353bdb52b474bac831
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
The DDR clock can be powered by either a PLL or an oscillator. An MC_CGM
mux selects between these two clock sources. A reset block, part of
partition 0, is also connected to this IP block. Therefore, all the
dependencies mentioned above must be configured to have a working clock.
Change-Id: Ia841428db9acb95c59ea851b6afeb0b7ff9230a2
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Bring in the implementation for the struct clk_ops->get_parent callback
for the S32G clock driver. The parent is established depending on the
clock object type. Usually, this is determined based on the parent
field, but not always.
Change-Id: I76a3d2636dc23ba2d547d058b8650dd0e99fe1fa
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Before this change, the internal oscillator clocked the UART with a
frequency of 48MHz. With the necessary support added, the UART clock
rate is increased to 125MHz by changing the clock source from FIRC to
PERIPH PLL PHI3.
Change-Id: I3160dc6860ebf441c9bea8eaf9d8d12de48bd647
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Peripheral PLL is one of the platform's PLLs, providing a clock for
peripherals such as UART, QSPI, uSDHC, SPI and CAN. Its source can be
either the FIRC or FXOSC oscillators. It has eight outputs (PHIs) and
their frequencies can be controlled programmatically using output
dividers. An additional output clocks the PERIPH DFS using the VCO
frequency of the PERIPH PLL.
Change-Id: I637294b2da94f35e95dc1750dad36c129a276bb9
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Add all clock modules required to enable the XBAR clock, including the
DFS, its output dividers and MC_CGM muxes.
Change-Id: Ib9cf82c0e40b76863637ed7602c3a09411d17615
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
These objects are needed to allow early enablement of the A53 core
clock.
Change-Id: I44d81975c8eba8cc6cfd18aeb6c9b324edaa3f01
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
The MC_CGM1 clock objects will participate in A53 clocking.
Change-Id: I7309b630d72ac0ad66df7c299b678454220e0581
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Add all the clock objects needed to describe the ARM PLL, which can be
powered by either FXOSC or FIRC oscillators.
Change-Id: I2585ed38178ca1d5c5485adb38af1b3b8d94f1f6
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
The oscillator clock objects will be used to describe the FIRC, FXOSC,
and SIRC clocks, all of which are oscillators on S32CC SoCs.
Change-Id: Icf235cc9b8f1d95d2c0051ce9a7655fd120289b8
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
