Add and map the carveout for loading Hafnium as BL32 image. Also define
PLAT_ARM_SP_MAX_SIZE as 3 MB for secure partitions.
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Signed-off-by: Nishant Sharma <nishant.sharma@arm.com>
Signed-off-by: Rakshit Goyal <rakshit.goyal@arm.com>
Change-Id: I2845eb6807a127c9f6b92de2dabc9a58d25bd4d4
In the BL1 based boot-flow, the non-secure DTB, NT_FW_CONFIG, is parsed
in BL2. As BL1 and BL2 are not part of RESET_TO_BL31, add support to
parse and configure this DTB in BL31. NT_FW_CONFIG contains the platform
information which is needed by BL33.
Signed-off-by: Rakshit Goyal <rakshit.goyal@arm.com>
Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>
Change-Id: Ib1fb5417c36523eb2ec02aa22845218de68809aa
GPC SMMU does granule protection checks (GPC) for accesses originating
from the system control block and GIC on RD-Fremont platforms. The GPC
check on this is disabled by the boot firmware. Configure the GPC SMMU
to enable GPC.
The transactions on GPC SMMU should be allowed during boot stages so
don't perform smmuv3_security_init() for this SMMU instance.
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>
Change-Id: I3400c57fe264582a45c6a26f9dae8c669e8a8047
Since GPT setup has been delegated to the platform, add an
implementation for plat_bl2_gpt_setup in accordance with the
specification for RD-Fremont variants.
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I1ff47249ce304f1c188850282d92c64cae463383
Given the differences in memory map of the third generation reference
design platforms, it is necessary to move away from the common DRAM
layout present as part of arm_def.h. Therefore, introduce definitions
and necessary carveouts within DRAM to define a new DRAM layout for
these platforms.
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I79af066f41259f147febdc3c00447db5be995799
Given the differences in memory map and additional RME requirements for
the V3 CPU based platforms, it is necessary to move away from the common
SRAM layout present as part of arm_def.h. Therefore, introduce
definitions and necessary carveouts within SRAM to define a new SRAM
layout for these platforms.
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I2d0ef65abde66da7523dd9e09036c7803978570c
Add firmware definitions for the third generation of platforms. The
following files are added -
- nrd_css_fw_def3.h: for CSS firmware definitions
- nrd_ros_fw_def3.h : for RoS firmware definitions
- nrd_plat_arm_def3.h: for platform port macros
All the common files for these platforms are housed under nrd3
directory.
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I085d609cfe1686d28d1c467fb34d45af47e00eb6
