Cortex A78 AE erratum 1951502 is a Cat B erratum that applies to revisions
<= r0p1. It is still open. This erratum is avoided by inserting a DMB ST
before acquire atomic instructions without release semantics through a series
of writes to implementation defined system registers.
SDEN is available at https://developer.arm.com/documentation/SDEN1707912/0900
Change-Id: I812c5a37cdd03486df8af6046d9fa988f6a0a098
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
* changes:
feat(plat/rcar3): emit RPC status to DT fragment if RPC unlocked
feat(plat/rcar3): add a DRAM size setting for M3N
feat(plat/rcar3): update IPL and Secure Monitor Rev.3.0.0
feat(plat/rcar3): add new board revision for Salvator-XS/H3ULCB
feat(drivers/rcar3): ddr: add function to judge a DDR rank
fix(drivers/rcar3): ddr: update DDR setting for H3, M3, M3N
fix(drivers/rcar3): i2c_dvfs: fix I2C operation
fix(drivers/rcar3): fix CPG registers redefinition
fix(drivers/rcar3): emmc: remove CPG_CPGWPR redefinition
fix(plat/rcar3): generate two memory nodes for larger than 2 GiB channel 0
refactor(plat/rcar3): factor out DT memory node generation
feat(plat/rcar3): add optional support for gzip-compressed BL33
* changes:
feat(io_mtd): offset management for FIP usage
feat(nand): count bad blocks before a given offset
feat(plat/st): add helper to save boot interface
fix(plat/st): improve DDR get size function
refactor(plat/st): map DDR secure at boot
refactor(plat/st): rework TZC400 configuration
This renames tc0 platform folder and files to tc, and introduces
TARGET_PLATFORM variable to account for the differences between
TC0 and TC1.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I5b4a83f3453afd12542267091b3edab4c139c5cd
Neoverse V1 erratum 2139242 is a Cat B erratum present in the V1
processor core. This issue is present in revisions r0p0, r1p0,
and r1p1, and it is still open.
SDEN can be found here:
https://documentation-service.arm.com/static/60d499080320e92fa40b4625
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I5c2e9beec72a64ac4131fb6dd76199821a934ebe
Neoverse V1 erratum 1966096 is a Cat B erratum present in the V1
processor core. This issue is present in revisions r0p0, r1p0,
and r1p1, but the workaround only applies to r1p0 and r1p1, it is still
open.
SDEN can be found here:
https://documentation-service.arm.com/static/60d499080320e92fa40b4625
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ic0b9a931e38da8a7000648e221481e17c253563b
This reverts commit 4d9b9b2352.
Timeout in IPI ack was added for functional safety reason.
Functional safety is not criteria for ATF. However, this
creates issues for APIs that take long or non-deterministic
duration like FPGA load. So revert this patch for now to fix
FPGA loading issue. Need to add support for non-blocking API
for FPGA loading with callback when API completes.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I940e798f1e2f7d0dfca1da5caaf8b94036d440c6
DFD (Design for Debug) is a debugging tool, which scans
flip-flops and dumps to internal RAM on the WDT reset.
After system reboots, those values could be showed for
debugging.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I9c7af9a4f75216ed2c6b44458d121a352bef4b95
Fixed the build error by removing the local definition of 'efi_guid'
structure in 'sgi_ras.c' file as this structure definition is already
populated in 'sgi_ras.c' file via 'uuid.h' header.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I57687336863f2a0761c09b6c1aa00b4aa82a6a12
Bump the required FF-A version in framework and manifests to v1.1 as
upstream feature development goes.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I89b2bd3828a13fc4344ccd53bc3ac9c0c22ab29f
Neoverse V1 erratum 1925756 is a Cat B erratum present in r0p0, r1p0,
and r1p1 of the V1 processor core, and it is still open.
SDEN can be found here:
https://documentation-service.arm.com/static/60d499080320e92fa40b4625
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I6500dc98da92a7c405b9ae09d794d666e8f4ae52
Neoverse V1 erratum 1852267 is a Cat B erratum present in r0p0 and
r1p0 of the V1 processor core. It is fixed in r1p1.
SDEN can be found here:
https://documentation-service.arm.com/static/60d499080320e92fa40b4625
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Ide5e0bc09371fbc91c2385ffdff74e604beb2dbe
Neoverse V1 erratum 1774420 is a Cat B erratum present in r0p0 and
r1p0 of the V1 processor core. It is fixed in r1p1.
SDEN can be found here:
https://documentation-service.arm.com/static/60d499080320e92fa40b4625
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I66e27b2518f73faeedd8615a1443a74b6a30f123
NXP drivers header files are moved:
- from: drivers/nxp/<xx>/*.h
- to : include/drivers/nxp/<xx>/*.h
To accommodate these changes each drivers makefiles
drivers/nxp/<xx>/xx.mk, are updated.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I3979c509724d87e3d631a03dbafda1ee5ef07d21
Added software CRC32 support in case platform doesn't support
hardware CRC32.
Platform must include necessary Zlib source files for compilation
to use software CRC32 implementation.
Change-Id: Iecb649b2edf951944b1a7e4c250c40fe7a3bde25
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Renamed hw_crc32 to tf_crc32 to make the file and function
name more generic so that the same name can be used in upcoming
software CRC32 implementation.
Change-Id: Idff8f70c50ca700a4328a27b49d5e1f14d2095eb
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
All firmware banks should be part of the same non-volatile storage
as per PSA FWU specification, hence avoid checking for any alternate
boot source when PSA FWU is enabled.
Change-Id: I5b016e59e87f1cbfc73f4cd29fce6017c24f88b3
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added firmware update documentation for:
1. PSA firmware update build flag
2. Porting guidelines to set the addresses of FWU metadata image
and updated components in I/O policy
Change-Id: Iad3eb68b4be01a0b5850b69a067c60fcb464f54b
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Avoided NV counter update when the system is running in
trial run state.
Change-Id: I5da6a6760f8a9faff777f2ff879156e9c3c76726
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added firmware update support in Arm platforms by using
FWU platform hooks and compiling FWU driver in BL2
component.
Change-Id: I71af06c09d95c2c58e3fd766c4a61c5652637151
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Initialized FWU driver module in BL2 component under
build flag PSA_FWU_SUPPORT.
Change-Id: I08b191599835925c355981d695667828561b9a21
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Implemented FWU metadata load and verification APIs.
Also, exported below APIs to the platform:
1. fwu_init - Load FWU metadata in a structure. Also, set the
addresses of updated components in I/O policy
2. fwu_is_trial_run_state - To detect trial run or regular run
state
Change-Id: I67eeabb52d9275ac83be635306997b7c353727cd
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added FWU platform specific functions declarations in common
platform header.
Change-Id: I637e61753ea3dc7f7e7f3159ae1b43ab6780aef2
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added the build options used in defining the firmware update metadata
structure.
Change-Id: Idd40ea629e643e775083f283b75c80f6c026b127
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added a firmware update metadata structure as per section 4.1
in the specification document[1].
Also, added the build options used in defining the firmware
update metadata structure.
[1]: https://developer.arm.com/documentation/den0118/a/
Change-Id: I8f43264a46fde777ceae7fd2a5bb0326f1711928
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
External Abort may happen also during printing of some messages by
U-Boot or kernel. So print newline before fatal abort error message.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ic7579b605e695c2e4cb9a4f5cdc2d0b3e5083e49
These files are needed during boot, but they were missing
for semihosting.
With this patch, the list of files is complete enough to
boot on ATF platform via semihosting.
Change-Id: I2f0ca25983a6e18096f040780776f19f8040ea79
Signed-off-by: stsp@users.sourceforge.net
Consider a RAS scenario:
Enter EL3 by sync exception, then call spm_mm_sp_call() enter
EL0s to handle this error, then call sdei_dispatch_event() to
inform OS. Finally, return back to OS from sync exception flow.
Similar flow is sgi_ras_intr_handler() in sgi_ras.c.
The icc_pmr_el1 register will be change in above flow:
1 cm_el1_sysregs_context_save(NON_SECURE);
-> ehf_exited_normal_world();
##icc_pmr_el1: 0xf8 => 0x80
2 spm_mm_sp_call();
3 sdei_dispatch_event();
4 ehf_activate_priority(sdei_event_priority(map));
##icc_pmr_el1: 0x80 => 0x60
5 restore_and_resume_ns_context();
-> ehf_exited_normal_world();
##return due to has_valid_pri_activations(pe_data) == 1
6 ehf_deactivate_priority(sdei_event_priority(map));
##icc_pmr_el1: 0x60 => 0x80
The icc_pmr_el1 was rewrote from 0xf8 to 0x80. This issue will
result in OS hang when eret to OS from RAS flow.
Move ehf_activate_priority(sdei_event_priority(map)) after
restore_and_resume_ns_context() can fix this issue.
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: If01ec55cf0aabf1594dece1ad50d3ec3406cdabc
The rpi4 has a single nonstandard ECAM. It is broken
into two pieces, the root port registers, and a window
to a single device's config space which can be moved
between devices. Now that we have widened the page
tables/MMIO window, we can create a read/write acces
functions that are called by the SMCCC/PCI API.
As an example platform, the rpi4 single device ECAM
region quirk is pretty straightforward. The assumption
here is that a lower level (uefi) has configured and
initialized the PCI root to match the values we are
using here.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: Ie1ffa8fe9aa1d3c62e6aa84746a949c1009162e0
