BL2_AT_EL3 is an overloaded macro which has two uses:
1. When BL2 is entry point into TF-A(no BL1)
2. When BL2 is running at EL3 exception level
These two scenarios are not exactly same even though first implicitly
means second to be true. To distinguish between these two use cases we
introduce new macros.
BL2_AT_EL3 is renamed to RESET_TO_BL2 to better convey both 1. and 2.
Additional macro BL2_RUNS_AT_EL3 is added to cover all scenarious where
BL2 runs at EL3 (including four world systems).
BREAKING CHANGE: BL2_AT_EL3 renamed to RESET_TO_BL2 across the
repository.
Change-Id: I477e1d0f843b44b799c216670e028fcb3509fb72
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>
Current panic call invokes do_panic which calls el3_panic, but now panic
handles only panic from EL3 anid clear separation to use lower_el_panic()
which handles panic from lower ELs.
So now we can remove do_panic and just call el3_panic for all panics.
Change-Id: I739c69271b9fb15c1176050877a9b0c0394dc739
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Most of the macros/routine in vector entry need a free scratch register.
Introduce a macro "save_x30" and call it right at the begining of vector
entries where x30 is used. It is more exlicit and less error prone
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I617f3d41a120739e5e3fe1c421c79ceb70c1188e
Add new options SEPARATE_BL2_NOLOAD_REGION to separate no-loadable
sections (.bss, stack, page tables) to a ram region specified
by BL2_NOLOAD_START and BL2_NOLOAD_LIMIT.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I844ee0fc405474af0aff978d292c826fbe0a82fd
During a transition to a higher EL some of the PSTATE bits are not set
by hardware, this means that their state may be leaked from lower ELs.
This patch sets those bits to a default value upon entry to EL3.
This patch was tested using a debugger to check the PSTATE values
are correctly set. As well as adding a test in the next patch to
ensure the PSTATE in lower ELs is still maintained after this change.
Change-Id: Ie546acbca7b9aa3c86bd68185edded91b2a64ae5
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
This patch adds two new compile time options to enable SME in TF-A:
ENABLE_SME_FOR_NS and ENABLE_SME_FOR_SWD for use in non-secure and
secure worlds respectively. Setting ENABLE_SME_FOR_NS=1 will enable
SME for non-secure worlds and trap SME, SVE, and FPU/SIMD instructions
in secure context. Setting ENABLE_SME_FOR_SWD=1 will disable these
traps, but support for SME context management does not yet exist in
SPM so building with SPD=spmd will fail.
The existing ENABLE_SVE_FOR_NS and ENABLE_SVE_FOR_SWD options cannot
be used with SME as it is a superset of SVE and will enable SVE and
FPU/SIMD along with SME.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Iaaac9d22fe37b4a92315207891da848a8fd0ed73
Currently on image entry, the data cache in the RW address range is
invalidated before MMU is enabled to safeguard against potential
stale data from previous firmware stage. If PIE is enabled however,
RO sections including the GOT may be also modified during pie fixup.
Therefore, to be on the safe side, invalidate the entire image
region if PIE is enabled.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I7ee2a324fe4377b026e32f9ab842617ad4e09d89
This patch enables BL2 to run in root world (EL3) which is
needed as per the security model of RME-enabled systems.
Using the existing BL2_AT_EL3 TF-A build option is not convenient
because that option assumes TF-A BL1 doesn't exist, which is not
the case for RME-enabled systems. For the purposes of RME, we use
a normal BL1 image but we also want to run BL2 in EL3 as normally as
possible, therefore rather than use the special bl2_entrypoint
function in bl2_el3_entrypoint.S, we use a new bl2_entrypoint
function (in bl2_rme_entrypoint.S) which doesn't need reset or
mailbox initialization code seen in the el3_entrypoint_common macro.
The patch also cleans up bl2_el3_entrypoint.S, moving the
bl2_run_next_image function to its own file to avoid duplicating
code.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I99821b4cd550cadcb701f4c0c4dc36da81c7ef55
Trap bits of trace filter control registers access are in
architecturally UNKNOWN state at boot hence
1. Initialized trap bits to one to prohibit trace filter control
registers accesses in lower ELs (EL2, EL1) in all security states
when FEAT_TRF is implemented.
2. These bits are RES0 when FEAT_TRF is not implemented and hence set
it to zero to aligns with the Arm ARM reference recommendation,
that mentions software must writes RES0 bits with all 0s.
Change-Id: I1b7abf2170ece84ee585c91cda32d22b25c0fc34
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Trap bits of trace system registers access are in architecturally
UNKNOWN state at boot hence
1. Initialized trap bits to one to prohibit trace system registers
accesses in lower ELs (EL2, EL1) in all security states when system
trace registers are implemented.
2. These bits are RES0 in the absence of system trace register support
and hence set it to zero to aligns with the Arm ARM reference
recommendation,that mentions software must writes RES0 bits with
all 0s.
Change-Id: I4b6c15cda882325273492895d72568b29de89ca3
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Trap bits of trace buffer control registers access are in
architecturally UNKNOWN state at boot hence
1. Initialized these bits to zero to prohibit trace buffer control
registers accesses in lower ELs (EL2, EL1) in all security states
when FEAT_TRBE is implemented
2. Also, these bits are RES0 when FEAT_TRBE is not implemented, and
hence setting it to zero also aligns with the Arm ARM reference
recommendation, that mentions software must writes RES0 bits with
all 0s
Change-Id: If2752fd314881219f232f21d8e172a9c6d341ea1
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Enables SVE support for the secure world via ENABLE_SVE_FOR_SWD.
ENABLE_SVE_FOR_SWD defaults to 0 and has to be explicitly set by the
platform. SVE is configured during initial setup and then uses EL3
context save/restore routine to switch between SVE configurations for
different contexts.
Reset value of CPTR_EL3 changed to be most restrictive by default.
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I889fbbc2e435435d66779b73a2d90d1188bf4116
This patch adds setting MDCR_EL3.MCCD in 'el3_arch_init_common'
macro to disable cycle counting by PMCCNTR_EL0 in EL3 when
FEAT_PMUv3p7 is implemented. This fixes failing test
'Leak PMU CYCLE counter values from EL3 on PSCI suspend SMC'
on FVP models with 'has_v8_7_pmu_extension' parameter set to
1 or 2.
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Change-Id: I2ad3ef501b31ee11306f76cb5a61032ecfd0fbda
If FEAT_PMUv3 is implemented and PMEVTYPER<n>(_EL0).MT bit is implemented
as well, it is possible to control whether PMU counters take into account
events happening on other threads.
If FEAT_MTPMU is implemented, EL3 (or EL2) can override the MT bit
leaving it to effective state of 0 regardless of any write to it.
This patch introduces the DISABLE_MTPMU flag, which allows to diable
multithread event count from EL3 (or EL2). The flag is disabled
by default so the behavior is consistent with those architectures
that do not implement FEAT_MTPMU.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: Iee3a8470ae8ba13316af1bd40c8d4aa86e0cb85e
Usually, C has no problem up-converting types to larger bit sizes. MISRA
rule 10.7 requires that you not do this, or be very explicit about this.
This resolves the following required rule:
bl1/aarch64/bl1_context_mgmt.c:81:[MISRA C-2012 Rule 10.7 (required)]<None>
The width of the composite expression "0U | ((mode & 3U) << 2U) | 1U |
0x3c0U" (32 bits) is less that the right hand operand
"18446744073709547519ULL" (64 bits).
This also resolves MISRA defects such as:
bl2/aarch64/bl2arch_setup.c:18:[MISRA C-2012 Rule 12.2 (required)]
In the expression "3U << 20", shifting more than 7 bits, the number
of bits in the essential type of the left expression, "3U", is
not allowed.
Further, MISRA requires that all shifts don't overflow. The definition of
PAGE_SIZE was (1U << 12), and 1U is 8 bits. This caused about 50 issues.
This fixes the violation by changing the definition to 1UL << 12. Since
this uses 32bits, it should not create any issues for aarch32.
This patch also contains a fix for a build failure in the sun50i_a64
platform. Specifically, these misra fixes removed a single and
instruction,
92407e73 and x19, x19, #0xffffffff
from the cm_setup_context function caused a relocation in
psci_cpus_on_start to require a linker-generated stub. This increased the
size of the .text section and caused an alignment later on to go over a
page boundary and round up to the end of RAM before placing the .data
section. This sectionn is of non-zero size and therefore causes a link
error.
The fix included in this reorders the functions during link time
without changing their ording with respect to alignment.
Change-Id: I76b4b662c3d262296728a8b9aab7a33b02087f16
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
As per latest mailing communication [1], we decided to
update AT speculative workaround implementation in order to
disable page table walk for lower ELs(EL1 or EL0) immediately
after context switching to EL3 from lower ELs.
Previous implementation of AT speculative workaround is available
here: 45aecff00
AT speculative workaround is updated as below:
1. Avoid saving and restoring of SCTLR and TCR registers for EL1
in context save and restore routine respectively.
2. On EL3 entry, save SCTLR and TCR registers for EL1.
3. On EL3 entry, update EL1 system registers to disable stage 1
page table walk for lower ELs (EL1 and EL0) and enable EL1
MMU.
4. On EL3 exit, restore SCTLR and TCR registers for EL1 which
are saved in step 2.
[1]:
https://lists.trustedfirmware.org/pipermail/tf-a/2020-July/000586.html
Change-Id: Iee8de16f81dc970a8f492726f2ddd57e7bd9ffb5
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Some platforms are extremely memory constrained and must split BL31
between multiple non-contiguous areas in SRAM. Allow the NOBITS
sections (.bss, stacks, page tables, and coherent memory) to be placed
in a separate region of RAM from the loaded firmware image.
Because the NOBITS region may be at a lower address than the rest of
BL31, __RW_{START,END}__ and __BL31_{START,END}__ cannot include this
region, or el3_entrypoint_common would attempt to invalidate the dcache
for the entire address space. New symbols __NOBITS_{START,END}__ are
added when SEPARATE_NOBITS_REGION is enabled, and the dcached for the
NOBITS region is invalidated separately.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Idedfec5e4dbee77e94f2fdd356e6ae6f4dc79d37
When a Firmware is complied as Position Independent Executable it needs
to request GDT fixup by passing size of the memory region to
el3_entrypoint_common macro.
The Global descriptor table fixup will be done early on during cold boot
process of primary core.
Currently only BL31 supports PIE, but in future when BL2_AT_EL3 will be
compiled as PIE, it can simply pass fixup size to the common el3
entrypoint macro to fixup GDT.
The reason for this patch was to overcome the bug introduced by SHA
330ead806 which called fixup routine for each core causing
re-initializing of global pointers thus overwriting any changes
done by the previous core.
Change-Id: I55c792cc3ea9e7eef34c2e4653afd04572c4f055
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Currently the MDCR_EL3 initialisation implicitly disables
MDCR_EL3.SPME by using mov_imm.
This patch makes the SPME bit more visible by explicitly
disabling it and documenting its use in different versions
of the architecture.
Signed-off-by: Petre-Ionut Tudor <petre-ionut.tudor@arm.com>
Change-Id: I221fdf314f01622f46ac5aa43388f59fa17a29b3
Add the missing flag for aarch32 XIP memory mode. It was
previously added in aarch64 only.
Minor: Correct the aarch64 missing flag.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iac0a7581a1fd580aececa75f97deb894858f776f
Some of the platform (ie. Agilex) make use of CCU IPs which will only be
initialized during bl2_el3_early_platform_setup. Any operation to the
cache beforehand will crash the platform. Hence, this will provide an
option to skip the data cache invalidation upon bl2 entry at EL3
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2c924ed0589a72d0034714c31be8fe57237d1f06
This patch fixes an issue when secure world timing information
can be leaked because Secure Cycle Counter is not disabled.
For ARMv8.5 the counter gets disabled by setting MDCR_El3.SCCD
bit on CPU cold/warm boot.
For the earlier architectures PMCR_EL0 register is saved/restored
on secure world entry/exit from/to Non-secure state, and cycle
counting gets disabled by setting PMCR_EL0.DP bit.
'include\aarch64\arch.h' header file was tided up and new
ARMv8.5-PMU related definitions were added.
Change-Id: I6f56db6bc77504634a352388990ad925a69ebbfa
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
ARMv8.3-PAuth adds functionality that supports address authentication of
the contents of a register before that register is used as the target of
an indirect branch, or as a load.
This feature is supported only in AArch64 state.
This feature is mandatory in ARMv8.3 implementations.
This feature adds several registers to EL1. A new option called
CTX_INCLUDE_PAUTH_REGS has been added to select if the TF needs to save
them during Non-secure <-> Secure world switches. This option must be
enabled if the hardware has the registers or the values will be leaked
during world switches.
To prevent leaks, this patch also disables pointer authentication in the
Secure world if CTX_INCLUDE_PAUTH_REGS is 0. Any attempt to use it will
be trapped in EL3.
Change-Id: I27beba9907b9a86c6df1d0c5bf6180c972830855
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
In a system with ARMv8.5-PMU implemented:
- If EL3 is using AArch32, setting MDCR_EL3.SCCD to 1 disables counting
in Secure state in PMCCNTR.
- If EL3 is using AArch64, setting SDCR.SCCD to 1 disables counting in
Secure state in PMCCNTR_EL0.
So far this effect has been achieved by setting PMCR_EL0.DP (in AArch64)
or PMCR.DP (in AArch32) to 1 instead, but this isn't considered secure
as any EL can change that value.
Change-Id: I82cbb3e48f2e5a55c44d9c4445683c5881ef1f6f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The architecture dependant header files in include/lib/${ARCH} and
include/common/${ARCH} have been moved to /include/arch/${ARCH}.
Change-Id: I96f30fdb80b191a51448ddf11b1d4a0624c03394
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2019-01-04 10:43:16 +00:00
Renamed from include/common/aarch64/el3_common_macros.S (Browse further)
