In this patch, we are trying to introduce the wrapper macro
CREATE_FEATURE_PRESENT to get the following capability and
align it for all the features:
-> is_feat_xx_present(): Does Hardware implement the feature.
-> uniformity in naming the function across multiple features.
-> improved readability
The is_feat_xx_present() is implemented to check if the hardware
implements the feature and does not take into account the
ENABLE_FEAT_XXX flag enabled/disabled in software.
- CREATE_FEATURE_PRESENT(name, idreg, shift, mask, idval)
The wrapper macro reduces the function to a single line and
creates the is_feat_xx_present function that checks the
id register based on the shift and mask values and compares
this against a determined idvalue.
Change-Id: I7b91d2c9c6fbe55f94c693aa1b2c50be54fb9ecc
Signed-off-by: Sona Mathew <sonarebecca.mathew@arm.com>
Currently, EL3 context registers are duplicated per-world per-cpu.
Some registers have the same value across all CPUs, so this patch
moves these registers out into a per-world context to reduce
memory usage.
Change-Id: I91294e3d5f4af21a58c23599af2bdbd2a747c54a
Signed-off-by: Elizabeth Ho <elizabeth.ho@arm.com>
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Combining the EL2 and EL3 enablement code necessitates that it must be
called at el3_exit, which is the only place with enough context to make
the decision of what needs to be set.
Decouple them to allow them to be called from elsewhere.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I147764c42771e7d4100699ec8fae98dac0a505c0
Currently, enabling SME forces SVE off. However, the SME enablement
requires SVE to be enabled, which is reflected in code. This is the
opposite of what the build flags require.
Further, the few platforms that enable SME also explicitly enable SVE.
Their platform.mk runs after the defaults.mk file so this override never
materializes. As a result, the override is only present on the
commandline.
Change it to something sensible where if SME is on then code can rely on
SVE being on too. Do this with a check in the Makefile as it is the more
widely used pattern. This maintains all valid use cases but subtly
changes corner cases no one uses at the moment to require a slightly
different combination of flags.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: If7ca3972ebc3c321e554533d7bc81af49c2472be
FEAT_SME2 is an extension of FEAT_SME and an optional feature
from v9.2. Its an extension of SME, wherein it not only
processes matrix operations efficiently, but also provides
outer-product instructions to accelerate matrix operations.
It affords instructions for multi-vector operations.
Further, it adds an 512 bit architectural register ZT0.
This patch implements all the changes introduced with FEAT_SME2
to ensure that the instructions are allowed to access ZT0
register from Non-secure lower exception levels.
Additionally, it adds support to ensure FEAT_SME2 is aligned
with the existing FEATURE DETECTION mechanism, and documented.
Change-Id: Iee0f61943304a9cfc3db8f986047b1321d0a6463
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Add support for runtime detection (ENABLE_SVE_FOR_NS=2), by splitting
sve_supported() into an ID register reading function and a
second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we do SVE specific setup.
Change the FVP platform default to the now supported dynamic
option (=2), so the right decision can be made by the code at runtime.
Change-Id: I1caaba2216e8e2a651452254944a003607503216
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Add support for runtime detection (ENABLE_SME_FOR_NS=2), by splitting
feat_sme_supported() into an ID register reading function and a
second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we do SME specific setup.
Change the FVP platform default to the now supported dynamic option
(=2),so the right decision can be made by the code at runtime.
Change-Id: Ida9ccf737db5be20865b84f42b1f9587be0626ab
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
EL3 is configured to trap accesses to SME registers (via
CPTR_EL3.ESM=0). To allow SME instructions, this needs to be temporarily
disabled before changing system registers. If the PE delays the effects
of writes to system registers then accessing the SME registers will trap
without an isb. This patch adds the isb to restore functionality.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I8ee5ecaec978dde2525631daa682a182ad8f7f04
Due to their interrelationship in the architecture the SVE and SME
features in TF-A are mutually exclusive. This means that a single binary
can't be shared between systems with and without SME if the system
without SME does support SVE, SVE will not be initialised so lower ELs
will run into trouble trying to use it. This unusual behaviour for TF-A
which normally gracefully handles situations where features are enabled
but not supported on the current hardware.
Address this by calling the SVE enable and disable functions if SME is
not supported rather than immediately exiting, these perform their own
feature checks so if neither SVE nor SME is supported behaviour is
unchanged.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: I2c606202fa6c040069f44e29d36b5abb48391874
This patch adds two new compile time options to enable SME in TF-A:
ENABLE_SME_FOR_NS and ENABLE_SME_FOR_SWD for use in non-secure and
secure worlds respectively. Setting ENABLE_SME_FOR_NS=1 will enable
SME for non-secure worlds and trap SME, SVE, and FPU/SIMD instructions
in secure context. Setting ENABLE_SME_FOR_SWD=1 will disable these
traps, but support for SME context management does not yet exist in
SPM so building with SPD=spmd will fail.
The existing ENABLE_SVE_FOR_NS and ENABLE_SVE_FOR_SWD options cannot
be used with SME as it is a superset of SVE and will enable SVE and
FPU/SIMD along with SME.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Iaaac9d22fe37b4a92315207891da848a8fd0ed73
