# translation of joystick.po to Chinese Traditional # # Asho Yeh , 2004. # Frank Weng (a.k.a. Franklin) , 2007. # Franklin Weng , 2007. # Frank Weng (a.k.a. Franklin) , 2008, 2009. msgid "" msgstr "" "Project-Id-Version: joystick\n" "Report-Msgid-Bugs-To: xakepa10@gmail.com\n" "POT-Creation-Date: 2014-12-09 18:22+0000\n" "PO-Revision-Date: 2009-11-22 14:45+0800\n" "Last-Translator: Frank Weng (a.k.a. Franklin) \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Lokalize 1.0\n" #: caldialog.cpp:41 joywidget.cpp:380 msgid "Calibration" msgstr "靈敏度校正" #: caldialog.cpp:44 msgid "Next" msgstr "下一步" #: caldialog.cpp:59 msgid "Please wait a moment to calculate the precision" msgstr "請等一下準備校正精確度" #: caldialog.cpp:90 msgid "(usually X)" msgstr "(通常是 X)" #: caldialog.cpp:92 msgid "(usually Y)" msgstr "(通常是 Y)" #: caldialog.cpp:97 msgid "" "Calibration is about to check the value range your device delivers.

Please move axis %1 %2 on your device to the minimum " "position.

Press any button on the device or click on the 'Next' " "button to continue with the next step." msgstr "" "準備偵測裝置移動範圍。

請移動裝置的%1 軸 %2到最小的位置。

按下搖桿任意鍵或按「下一步」繼續。" #: caldialog.cpp:114 msgid "" "Calibration is about to check the value range your device delivers.

Please move axis %1 %2 on your device to the center " "position.

Press any button on the device or click on the 'Next' " "button to continue with the next step." msgstr "" "準備偵測裝置移動範圍。

請移動裝置的%1 軸 %2到中央的位置。

按下搖桿任意鍵或按「下一步」繼續。" #: caldialog.cpp:131 msgid "" "Calibration is about to check the value range your device delivers.

Please move axis %1 %2 on your device to the maximum " "position.

Press any button on the device or click on the 'Next' " "button to continue with the next step." msgstr "" "準備偵測裝置移動範圍。

請移動裝置的%1 軸 %2到最大的位置。

按下搖桿任意鍵或按「下一步」繼續。" #: caldialog.cpp:154 joywidget.cpp:371 joywidget.cpp:406 msgid "Communication Error" msgstr "連線錯誤" #: caldialog.cpp:158 msgid "You have successfully calibrated your device" msgstr "裝置已校正完成" #: caldialog.cpp:158 joywidget.cpp:412 msgid "Calibration Success" msgstr "調校完成" #: caldialog.cpp:182 msgid "Value Axis %1: %2" msgstr "x座標 %1: %2" #: joydevice.cpp:55 msgid "The given device %1 could not be opened: %2" msgstr "無法開啟裝置:%1(%2)" #: joydevice.cpp:61 msgid "The given device %1 is not a joystick." msgstr "裝置 %1 不是搖桿" #: joydevice.cpp:66 msgid "Could not get kernel driver version for joystick device %1: %2" msgstr "無法取得搖桿 %1 的核心驅動程式版本: %2" #: joydevice.cpp:80 msgid "" "The current running kernel driver version (%1.%2.%3) is not the one this " "module was compiled for (%4.%5.%6)." msgstr "該模組所編譯的核心(%4.%5.%6)與正執行中的核心驅動程式版本(%1.%2.%3)不符" #: joydevice.cpp:92 msgid "Could not get number of buttons for joystick device %1: %2" msgstr "無法取得搖桿 %1 按鍵數目: %2" #: joydevice.cpp:98 msgid "Could not get number of axes for joystick device %1: %2" msgstr "無法取得搖桿 %1 座標: %2" #: joydevice.cpp:104 msgid "Could not get calibration values for joystick device %1: %2" msgstr "無法取得搖桿 %1 校正值: %2" #: joydevice.cpp:110 msgid "Could not restore calibration values for joystick device %1: %2" msgstr "無法還原校正值到搖桿 %1: %2" #: joydevice.cpp:116 msgid "Could not initialize calibration values for joystick device %1: %2" msgstr "無法初始校正值到搖桿 %1: %2" #: joydevice.cpp:122 msgid "Could not apply calibration values for joystick device %1: %2" msgstr "無法套用校正值到搖桿 %1: %2" #: joydevice.cpp:126 msgid "internal error - code %1 unknown" msgstr "內部錯誤 - 代碼 %1 不明" #: joystick.cpp:48 msgid "KDE Joystick Control Module" msgstr "KDE 搖桿控制模組" #: joystick.cpp:49 msgid "KDE System Settings Module to test Joysticks" msgstr "KDE 系統設定搖桿測試模組" #: joystick.cpp:50 msgid "(c) 2004, Martin Koller" msgstr "(c) 2004, Martin Koller" #: joystick.cpp:53 msgid "" "

Joystick

This module helps to check if your joystick is working " "correctly.
If it delivers wrong values for the axes, you can try to " "solve this with the calibration.
This module tries to find all " "available joystick devices by checking /dev/js[0-4] and /dev/input/" "js[0-4]
If you have another device file, enter it in the combobox.
The Buttons list shows the state of the buttons on your joystick, the Axes " "list shows the current value for all axes.
NOTE: the current Linux " "device driver (Kernel 2.4, 2.6) can only autodetect
  • 2-axis, 4-button " "joystick
  • 3-axis, 4-button joystick
  • 4-axis, 4-button " "joystick
  • Saitek Cyborg 'digital' joysticks
(For details you " "can check your Linux source/Documentation/input/joystick.txt)" msgstr "" "

搖桿

該模組能幫您檢查搖桿是否設定正確.
如果搖桿送出錯誤的方向, " "您可以重新校正搖桿.
該模組會試著搜尋 /dev/js[0-4] 和 /dev/input/js[0-4] " "找出可使用的搖桿
如果您有其他的裝置檔, 輸入到裝置清單新增.
按鍵清單" "列出搖桿上的所有按鍵, 座標列表列出所有的座標位置.
注意: 現在的 Linux (核" "心 2.4, 2.6) 驅動程式可以自動偵測
  • 2-軸, 4-鍵 搖桿
  • 3-軸, 4-鍵 " "搖桿
  • 4-軸, 4-鍵 搖桿
  • Saitek Cyborg 'digital' 搖桿
    • (更多的資訊請參閱 Linux 源碼中的 Documentation/input/joystick.txt)" #: joywidget.cpp:49 msgid "PRESSED" msgstr "按下" #: joywidget.cpp:84 msgid "Device:" msgstr "裝置:" #: joywidget.cpp:103 msgctxt "Cue for deflection of the stick" msgid "Position:" msgstr "位置：" #: joywidget.cpp:106 msgid "Show trace" msgstr "秀出軌跡" #: joywidget.cpp:119 msgid "Buttons:" msgstr "按鍵:" #: joywidget.cpp:123 msgid "State" msgstr "狀態" #: joywidget.cpp:131 msgid "Axes:" msgstr "座標軸:" #: joywidget.cpp:135 msgid "Value" msgstr "值" #: joywidget.cpp:148 msgid "Calibrate" msgstr "校正" #: joywidget.cpp:220 msgid "" "No joystick device automatically found on this computer.
    Checks were " "done in /dev/js[0-4] and /dev/input/js[0-4]
    If you know that there is " "one attached, please enter the correct device file." msgstr "" "電腦上找不到任何搖桿。
    檢查 /dev/js[0-4] 和 /dev/input/js[0-4] 是否正常" "
    如果已確認連線，請輸入正確的裝置檔案。" #: joywidget.cpp:265 msgid "" "The given device name is invalid (does not contain /dev).\n" "Please select a device from the list or\n" "enter a device file, like /dev/js0." msgstr "" "裝置名稱不合法(不包含/dev).\n" "請選擇清單中的裝置或\n" "輸入裝置檔案，像是/dev/js0." #: joywidget.cpp:267 msgid "Unknown Device" msgstr "未知的裝置" #: joywidget.cpp:285 msgid "Device Error" msgstr "裝置錯誤" #: joywidget.cpp:306 msgid "1(x)" msgstr "1(x)" #: joywidget.cpp:307 msgid "2(y)" msgstr "2(y)" #: joywidget.cpp:376 msgid "" "Calibration is about to check the precision.

    Please move " "all axes to their center position and then do not touch the joystick anymore." "

    Click OK to start the calibration.    " msgstr "" "準備校正準確度.

    請將轉軸移到中心然後不要再接觸搖桿.

    按下確定開始校正.    " #: joywidget.cpp:411 msgid "Restored all calibration values for joystick device %1." msgstr "還原搖桿裝置 %1 的設定值."