# translation of partitionmanager.po to 简体中文
# Copyright (C) YEAR This_file_is_part_of_KDE
# This file is distributed under the same license as the PACKAGE package.
#
# Ni Hui <shuizhuyuanluo@126.com>, 2008, 2010, 2011.
# Feng Chao <rainofchaos@gmail.com>, 2010.
msgid ""
msgstr ""
"Project-Id-Version: partitionmanager\n"
"Report-Msgid-Bugs-To: xakepa10@gmail.com\n"
"POT-Creation-Date: 2014-12-09 18:22+0000\n"
"PO-Revision-Date: 2011-12-04 15:16+0800\n"
"Last-Translator: Ni Hui <shuizhuyuanluo@126.com>\n"
"Language-Team: Chinese Simplified <kde-china@kde.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Lokalize 1.2\n"

#: jobs/restorefilesystemjob.cpp:75
msgctxt "@info/plain"
msgid "Could not open backup file <filename>%1</filename> to restore from."
msgstr "无法打开备份文件 <filename>%1</filename> 以还原。"

#: jobs/restorefilesystemjob.cpp:77 jobs/shredfilesystemjob.cpp:73
msgctxt "@info/plain"
msgid "Could not open target partition <filename>%1</filename> to restore to."
msgstr "无法打开目标分区 <filename>%1</filename> 以还原。"

#: jobs/restorefilesystemjob.cpp:105 jobs/shredfilesystemjob.cpp:77
#: jobs/movefilesystemjob.cpp:80
msgctxt "@info/plain"
msgid "Closing device. This may take a few seconds."
msgstr "正在关闭设备。这可能需要几秒钟。"

#: jobs/restorefilesystemjob.cpp:116
msgctxt "@info/plain"
msgid ""
"Restore the file system from file <filename>%1</filename> to partition "
"<filename>%2</filename>"
msgstr ""
"从文件 <filename>%1</filename> 还原文件系统到分区 <filename>%2</filename>"

#: jobs/backupfilesystemjob.cpp:65
msgctxt "@info/plain"
msgid ""
"Could not open file system on source partition <filename>%1</filename> for "
"backup."
msgstr "无法打开来源分区 <filename>%1</filename> 上的文件系统以备份。"

#: jobs/backupfilesystemjob.cpp:67
msgctxt "@info/plain"
msgid "Could not create backup file <filename>%1</filename>."
msgstr "无法创建备份文件 <filename>%1</filename>。"

#: jobs/backupfilesystemjob.cpp:79
msgctxt "@info/plain"
msgid ""
"Back up file system on partition <filename>%1</filename> to <filename>%2</"
"filename>"
msgstr ""
"备份分区 <filename>%1</filename> 上的文件系统到 <filename>%2</filename>"

#: jobs/createpartitiontablejob.cpp:59
msgctxt "@info/plain"
msgid ""
"Creating partition table failed: Could not open device <filename>%1</"
"filename>."
msgstr "创建分区表失败：无法打开设备 <filename>%1</filename>。"

#: jobs/createpartitiontablejob.cpp:68
msgctxt "@info/plain"
msgid "Create new partition table on device <filename>%1</filename>"
msgstr "在设备 <filename>%1</filename> 上创建新分区表"

#: jobs/setpartgeometryjob.cpp:82
msgctxt "@info/plain"
msgid ""
"Could not open device <filename>%1</filename> while trying to resize/move "
"partition <filename>%2</filename>."
msgstr ""
"尝试移动/调整分区 <filename>%2</filename> 大小时无法打开设备 <filename>%1</"
"filename>。"

#: jobs/setpartgeometryjob.cpp:91
msgctxt "@info/plain"
msgid ""
"Set geometry of partition <filename>%1</filename>: Start sector: %2, length: "
"%3"
msgstr "设定分区 <filename>%1</filename> 的物理结构：起始扇区：%2，长度：%3"

#: jobs/shredfilesystemjob.cpp:71
msgctxt "@info/plain"
msgid "Could not open random data source to overwrite file system."
msgstr "无法打开随机数据源以覆盖文件系统。"

#: jobs/shredfilesystemjob.cpp:88
msgctxt "@info/plain"
msgid "Shred the file system on <filename>%1</filename>"
msgstr "粉碎 <filename>%1</filename> 上的文件系统"

#: jobs/setpartflagsjob.cpp:85
msgctxt "@info/plain flag turned on, active"
msgid "on"
msgstr "已激活"

#: jobs/setpartflagsjob.cpp:85
msgctxt "@info/plain flag turned off, inactive"
msgid "off"
msgstr "未激活"

#: jobs/setpartflagsjob.cpp:85
msgctxt "@info/plain"
msgid ""
"There was an error setting flag %1 for partition <filename>%2</filename> to "
"state %3."
msgstr "设定分区 <filename>%2</filename> 的标记 %1 为状态 %3 时发生错误。"

#: jobs/setpartflagsjob.cpp:94
msgctxt "@info/plain"
msgid ""
"Could not find partition <filename>%1</filename> on device <filename>%2</"
"filename> to set partition flags."
msgstr ""
"无法在设备 <filename>%2</filename> 上找到分区 <filename>%1</filename> 以设定"
"分区标记。"

#: jobs/setpartflagsjob.cpp:102
msgctxt "@info/plain"
msgid ""
"Could not open partition table on device <filename>%1</filename> to set "
"partition flags for partition <filename>%2</filename>."
msgstr ""
"无法打开设备 <filename>%1</filename> 上的分区表以设定 分区 <filename>%2</"
"filename> 的分区标记。"

#: jobs/setpartflagsjob.cpp:107
msgctxt "@info/plain"
msgid ""
"Could not open device <filename>%1</filename> to set partition flags for "
"partition <filename>%2</filename>."
msgstr ""
"无法打开设备 <filename>%1</filename> 以设定分区 <filename>%2</filename> 的分"
"区标记。"

#: jobs/setpartflagsjob.cpp:120 ops/setpartflagsoperation.cpp:75
msgctxt "@info/plain"
msgid "Clear flags for partition <filename>%1</filename>"
msgstr "清除分区 <filename>%1</filename> 的标记"

#: jobs/setpartflagsjob.cpp:122
msgctxt "@info/plain"
msgid "Set the flags for partition <filename>%1</filename> to \"%2\""
msgstr "将分区 <filename>%1</filename> 的标记设定为“%2”"

#: jobs/createpartitionjob.cpp:71
#: plugins/libparted/libpartedpartitiontable.cpp:196
msgctxt "@info/plain"
msgid ""
"Failed to add partition <filename>%1</filename> to device <filename>%2</"
"filename>."
msgstr "向设备 <filename>%2</filename> 添加分区 <filename>%1</filename> 失败。"

#: jobs/createpartitionjob.cpp:76
msgctxt "@info/plain"
msgid ""
"Could not open partition table on device <filename>%1</filename> to create "
"new partition <filename>%2</filename>."
msgstr ""
"无法打开设备 <filename>%1</filename> 上的分区表以创建新分区 <filename>%2</"
"filename>。"

#: jobs/createpartitionjob.cpp:81
msgctxt "@info/plain"
msgid ""
"Could not open device <filename>%1</filename> to create new partition "
"<filename>%2</filename>."
msgstr ""
"无法打开设备 <filename>%1</filename> 以创建新分区 <filename>%2</filename>。"

#: jobs/createpartitionjob.cpp:91
msgctxt "@info/plain"
msgid "Create new partition <filename>%1</filename>"
msgstr "创建新分区 <filename>%1</filename>"

#: jobs/createpartitionjob.cpp:93
msgctxt "@info/plain"
msgid "Create new partition on device <filename>%1</filename>"
msgstr "在设备 <filename>%1</filename> 上创建新分区"

#: jobs/checkfilesystemjob.cpp:56
msgctxt "@info/plain"
msgid "Check file system on partition <filename>%1</filename>"
msgstr "检查分区 <filename>%1</filename> 上的文件系统"

#: jobs/setfilesystemlabeljob.cpp:51
msgctxt "@info/plain"
msgid ""
"File system on partition <filename>%1</filename> does not support setting "
"labels. Job ignored."
msgstr "分区 <filename>%1</filename> 上的文件系统不支持设置标签。已忽略作业。"

#: jobs/setfilesystemlabeljob.cpp:67
msgctxt "@info/plain"
msgid ""
"Set the file system label on partition <filename>%1</filename> to \"%2\""
msgstr "将分区 <filename>%1</filename> 上的文件系统标签设定为“%2”"

#: jobs/movefilesystemjob.cpp:64
msgctxt "@info/plain"
msgid ""
"Could not open file system on partition <filename>%1</filename> for moving."
msgstr "无法打开分区 <filename>%1</filename> 上的文件系统以移动。"

#: jobs/movefilesystemjob.cpp:66
msgctxt "@info/plain"
msgid ""
"Could not create target for moving file system on partition <filename>%1</"
"filename>."
msgstr "无法创建目标以移动分区 <filename>%1</filename> 上的文件系统。"

#: jobs/movefilesystemjob.cpp:78
msgctxt "@info/plain"
msgid "Rollback for file system on partition <filename>%1</filename> failed."
msgstr "回滚分区 <filename>%1</filename> 上的文件系统失败。"

#: jobs/movefilesystemjob.cpp:94
msgctxt "@info/plain"
msgid "Move the file system on partition <filename>%1</filename> to sector %2"
msgstr "移动分区 <filename>%1</filename> 上的文件系统到扇区 %2"

#: jobs/deletepartitionjob.cpp:71
#: plugins/libparted/libpartedpartitiontable.cpp:218
msgctxt "@info/plain"
msgid "Could not delete partition <filename>%1</filename>."
msgstr "无法删除分区 <filename>%1</filename>。"

#: jobs/deletepartitionjob.cpp:79
msgctxt "@info/plain"
msgid ""
"Could not open partition table on device <filename>%1</filename> to delete "
"partition <filename>%2</filename>."
msgstr ""
"无法打开设备 <filename>%1</filename> 上的分区表以 删除分区 <filename>%2</"
"filename>。"

#: jobs/deletepartitionjob.cpp:84
msgctxt "@info/plain"
msgid ""
"Deleting partition failed: Could not open device <filename>%1</filename>."
msgstr "删除分区失败：无法打开设备 <filename>%1</filename>。"

#: jobs/deletepartitionjob.cpp:93
msgctxt "@info/plain"
msgid "Delete the partition <filename>%1</filename>"
msgstr "删除分区 <filename>%1</filename>"

#: jobs/createfilesystemjob.cpp:70
msgctxt "@info/plain"
msgid ""
"Failed to set the system type for the file system on partition <filename>%1</"
"filename>."
msgstr "无法设定分区 <filename>%1</filename> 上的文件系统的系统类型。"

#: jobs/createfilesystemjob.cpp:75
msgctxt "@info/plain"
msgid ""
"Could not open partition table on device <filename>%1</filename> to set the "
"system type for partition <filename>%2</filename>."
msgstr ""
"无法打开设备 <filename>%1</filename> 上的分区表以设定分区 <filename>%2</"
"filename> 的系统类型。"

#: jobs/createfilesystemjob.cpp:80
msgctxt "@info/plain"
msgid ""
"Could not open device <filename>%1</filename> to set the system type for "
"partition <filename>%2</filename>."
msgstr ""
"无法打开设备 <filename>%1</filename> 以设定分区 <filename>%2</filename> 的系"
"统类型。"

#: jobs/createfilesystemjob.cpp:91
msgctxt "@info/plain"
msgid "Create file system %1 on partition <filename>%2</filename>"
msgstr "检查分区 <filename>%2</filename> 上的文件系统 %1"

#: jobs/resizefilesystemjob.cpp:75
msgctxt "@info/plain"
msgid ""
"The file system on partition <filename>%2</filename> already has the "
"requested length of 1 sector."
msgid_plural ""
"The file system on partition <filename>%2</filename> already has the "
"requested length of %1 sectors."
msgstr[0] ""
"分区 <filename>%2</filename> 上的文件系统已经具有 %1 个扇区所需的长度。"

#: jobs/resizefilesystemjob.cpp:80
msgctxt "@info/plain"
msgid "Resizing file system from %1 to %2 sectors."
msgstr "将文件系统从 %1 调整为 %2 个扇区。"

#: jobs/resizefilesystemjob.cpp:89
msgctxt "@info/plain"
msgid "Resizing a %1 file system using internal backend functions."
msgstr "使用内部后端调整 %1 文件系统的大小。"

#: jobs/resizefilesystemjob.cpp:102
msgctxt "@info/plain"
msgid ""
"The file system on partition <filename>%1</filename> cannot be resized "
"because there is no support for it."
msgstr "分区 <filename>%1</filename> 上的文件系统无法调整大小因为它不支持。"

#: jobs/resizefilesystemjob.cpp:133
msgctxt "@info/plain"
msgid "Successfully resized file system using internal backend functions."
msgstr "成功使用内部后端调整了文件系统的大小。"

#: jobs/resizefilesystemjob.cpp:140
#: plugins/libparted/libpartedpartitiontable.cpp:318
msgctxt "@info/plain"
msgid ""
"Could not open partition <filename>%1</filename> while trying to resize the "
"file system."
msgstr "尝试调整文件系统大小时无法打开分区 <filename>%1</filename>。"

#: jobs/resizefilesystemjob.cpp:145
#: plugins/libparted/libpartedpartitiontable.cpp:321
msgctxt "@info/plain"
msgid ""
"Could not read geometry for partition <filename>%1</filename> while trying "
"to resize the file system."
msgstr ""
"尝试调整文件系统大小时无法读取分区 <filename>%1</filename> 的物理结构。"

#: jobs/resizefilesystemjob.cpp:153
msgctxt "@info/plain"
msgid "Maximize file system on <filename>%1</filename> to fill the partition"
msgstr "最大化 <filename>%1</filename> 上的文件系统以填满分区"

#: jobs/resizefilesystemjob.cpp:155
msgctxt "@info/plain"
msgid "Resize file system on partition <filename>%2</filename> to 1 sector"
msgid_plural ""
"Resize file system on partition <filename>%2</filename> to %1 sectors"
msgstr[0] "将分区 <filename>%2</filename> 上的文件系统调整为 %1 个扇区"

#: jobs/copyfilesystemjob.cpp:61
msgctxt "@info/plain"
msgid ""
"Cannot copy file system: File system on target partition <filename>%1</"
"filename> is smaller than the file system on source partition <filename>%2</"
"filename>."
msgstr ""
"无法复制文件系统：目标分区 <filename>%1</filename> 上的文件系统比来源分区 "
"<filename>%2</filename> 上的文件系统小。"

#: jobs/copyfilesystemjob.cpp:70
msgctxt "@info/plain"
msgid ""
"Could not open file system on source partition <filename>%1</filename> for "
"copying."
msgstr "无法打开来源分区 <filename>%1</filename> 上的文件系统以复制。"

#: jobs/copyfilesystemjob.cpp:72
msgctxt "@info/plain"
msgid ""
"Could not open file system on target partition <filename>%1</filename> for "
"copying."
msgstr "无法打开目标分区 <filename>%1</filename> 上的文件系统以复制。"

#: jobs/copyfilesystemjob.cpp:76
#, fuzzy
msgctxt "@info/plain"
msgid ""
"Closing device. This may take a while, especially on slow devices like "
"Memory Sticks."
msgstr "正在关闭设备。这可能需要几秒钟。"

#: jobs/copyfilesystemjob.cpp:105
msgctxt "@info/plain"
msgid ""
"Copy file system on partition <filename>%1</filename> to partition <filename>"
"%2</filename>"
msgstr ""
"复制分区 <filename>%1</filename> 上的文件系统到分区 <filename>%2</filename>"

#: jobs/deletefilesystemjob.cpp:81
msgctxt "@info/plain"
msgid "Could not delete file system on <filename>%1</filename>."
msgstr "无法删除 <filename>%1</filename> 上的文件系统。"

#: jobs/deletefilesystemjob.cpp:89
msgctxt "@info/plain"
msgid ""
"Could not open partition table on device <filename>%1</filename> to delete "
"file system on <filename>%2</filename>."
msgstr ""
"无法打开设备 <filename>%1</filename> 上的分区表以删除 <filename>%2</"
"filename> 上的文件系统。"

#: jobs/deletefilesystemjob.cpp:94
msgctxt "@info/plain"
msgid ""
"Could not delete file system signature for partition <filename>%1</"
"filename>: Failed to open device <filename>%2</filename>."
msgstr ""
"无法删除分区 <filename>%1</filename> 的文件系统签名：打开设备 <filename>%2</"
"filename> 失败。"

#: jobs/deletefilesystemjob.cpp:104
msgctxt "@info/plain"
msgid "Delete file system on <filename>%1</filename>"
msgstr "删除 <filename>%1</filename> 上的文件系统"

#: jobs/job.cpp:48
msgctxt "@info/plain"
msgid ""
"The logical sector sizes in the source and target for copying are not the "
"same. This is currently unsupported."
msgstr "用于复制的来源和目标逻辑扇区大小不相同。这目前还不支持。"

#: jobs/job.cpp:67
msgctxt "@info/plain"
msgid "Copying %1 blocks (%2 sectors) from %3 to %4, direction: %5."
msgstr "正在从 %3 复制 %1 个数据块(%2 个扇区)到 %4，方向：%5。"

#: jobs/job.cpp:92
msgctxt "@info/plain"
msgid "Copying %1 MiB/second, estimated time left: %2"
msgstr "正在复制 %1 MiB/秒，剩余时间：%2"

#: jobs/job.cpp:111
msgctxt "@info/plain"
msgid "Copying remainder of block size %1 from  %2 to %3."
msgstr "正在从 %2 复制数据块大小 %1 的剩余部分到 %3。"

#: jobs/job.cpp:124
msgid "1 sector"
msgid_plural "%1 sectors"
msgstr[0] "%1 个扇区"

#: jobs/job.cpp:124
msgctxt ""
"@info/plain argument 2 is a string such as 7 sectors (localized accordingly)"
msgid "Copying 1 block (%2) finished."
msgid_plural "Copying %1 blocks (%2) finished."
msgstr[0] "复制 %1 数据块(%2)已完成。"

#: jobs/job.cpp:133
msgctxt "@info/plain"
msgid "Source and target for copying do not overlap: Rollback is not required."
msgstr "用于复制来源和目标不重叠：不需要回滚。"

#: jobs/job.cpp:159
msgctxt "@info/plain"
msgid "Rollback from: First sector: %1, last sector: %2."
msgstr "回滚来源：首扇区：%1，尾扇区：%2。"

#: jobs/job.cpp:160
msgctxt "@info/plain"
msgid "Rollback to: First sector: %1, last sector: %2."
msgstr "回滚目标：首扇区：%1，尾扇区：%2。"

#: jobs/job.cpp:165 jobs/job.cpp:172
msgctxt "@info/plain"
msgid "Could not open device <filename>%1</filename> to rollback copying."
msgstr "无法打开设备 <filename>%1</filename> 以回滚复制。"

#: jobs/job.cpp:180
msgctxt "@info/plain"
msgid "Rollback failed: Source or target are not devices."
msgstr "回滚失败：来源或目标不是设备。"

#: jobs/job.cpp:195
msgctxt "@info/plain"
msgid "Job: %1"
msgstr "作业：%1"

#: jobs/job.cpp:204
msgctxt "@info/plain job status (error, warning, ...)"
msgid "%1: %2"
msgstr "%1：%2"

#: jobs/job.cpp:230
msgctxt "@info:progress job"
msgid "Pending"
msgstr "待执行"

#: jobs/job.cpp:231
msgctxt "@info:progress job"
msgid "Success"
msgstr "成功"

#: jobs/job.cpp:232
msgctxt "@info:progress job"
msgid "Error"
msgstr "错误"

#: fs/fat16.cpp:137
msgctxt "@info/plain"
msgid "Setting label for partition <filename>%1</filename> to %2"
msgstr "将分区 <filename>%1</filename> 的标签设定为 %2"

#: fs/ntfs.cpp:198
msgctxt "@info/plain"
msgid ""
"Updating boot sector for NTFS file system on partition <filename>%1</"
"filename>."
msgstr "正在更新分区 <filename>%1</filename> 上的 NTFS 文件系统引导扇区。"

#: fs/ntfs.cpp:211
msgctxt "@info/plain"
msgid ""
"Could not open partition <filename>%1</filename> for writing when trying to "
"update the NTFS boot sector."
msgstr "尝试更新 NTFS 引导扇区时无法打开分区 <filename>%1</filename> 以写入。"

#: fs/ntfs.cpp:217
msgctxt "@info/plain"
msgid ""
"Could not seek to position 0x1c on partition <filename>%1</filename> when "
"trying to update the NTFS boot sector."
msgstr ""
"尝试更新 NTFS 引导扇区时无法在分区 <filename>%1</filename> 上搜索到 0x1c 位"
"置。"

#: fs/ntfs.cpp:223
msgctxt "@info/plain"
msgid ""
"Could not write new start sector to partition <filename>%1</filename> when "
"trying to update the NTFS boot sector."
msgstr ""
"尝试更新 NTFS 引导扇区时无法向分区 <filename>%1</filename> 写入新的启动扇区。"

#: fs/ntfs.cpp:227
msgctxt "@info/plain"
msgid ""
"Updated NTFS boot sector for partition <filename>%1</filename> successfully."
msgstr "更新分区 <filename>%1</filename> 的 NTFS 引导扇区成功。"

#: fs/nilfs2.cpp:144
#, fuzzy
msgctxt "@info/plain"
msgid ""
"Resizing NILFS2 file system on partition <filename>%1</filename> failed: "
"Could not create temp dir."
msgstr ""
"调整分区 <filename>%1</filename> 上的 JFS 文件系统大小失败：无法创建临时目"
"录。"

#: fs/nilfs2.cpp:159
#, fuzzy
msgctxt "@info/plain"
msgid ""
"Resizing NILFS2 file system on partition <filename>%1</filename> failed: "
"NILFS2 file system resize failed."
msgstr ""
"调整分区 <filename>%1</filename> 上的 XFS 文件系统大小失败：xfs_growfs 失败。"

#: fs/nilfs2.cpp:164
#, fuzzy
msgctxt "@info/plain"
msgid ""
"Warning: Resizing NILFS2 file system on partition <filename>%1</filename>: "
"Unmount failed."
msgstr "警告：调整分区 <filename>%1</filename> 上的 JFS 文件系统：卸载失败。"

#: fs/nilfs2.cpp:167
#, fuzzy
msgctxt "@info/plain"
msgid ""
"Resizing NILFS2 file system on partition <filename>%1</filename> failed: "
"Initial mount failed."
msgstr ""
"调整分区 <filename>%1</filename> 上的 JFS 文件系统大小失败：首次挂载失败。"

#: fs/linuxswap.cpp:127
msgctxt "@title:menu"
msgid "Activate swap"
msgstr "激活交换分区"

#: fs/linuxswap.cpp:132
msgctxt "@title:menu"
msgid "Deactivate swap"
msgstr "取消激活交换分区"

#: fs/btrfs.cpp:140
#, fuzzy
msgctxt "@info/plain"
msgid ""
"Resizing Btrfs file system on partition <filename>%1</filename> failed: "
"Could not create temp dir."
msgstr ""
"调整分区 <filename>%1</filename> 上的 JFS 文件系统大小失败：无法创建临时目"
"录。"

#: fs/btrfs.cpp:155
#, fuzzy
msgctxt "@info/plain"
msgid ""
"Resizing Btrfs file system on partition <filename>%1</filename> failed: "
"btrfs file system resize failed."
msgstr ""
"调整分区 <filename>%1</filename> 上的 XFS 文件系统大小失败：xfs_growfs 失败。"

#: fs/btrfs.cpp:160
#, fuzzy
msgctxt "@info/plain"
msgid ""
"Warning: Resizing Btrfs file system on partition <filename>%1</filename>: "
"Unmount failed."
msgstr "警告：调整分区 <filename>%1</filename> 上的 JFS 文件系统：卸载失败。"

#: fs/btrfs.cpp:163
#, fuzzy
msgctxt "@info/plain"
msgid ""
"Resizing Btrfs file system on partition <filename>%1</filename> failed: "
"Initial mount failed."
msgstr ""
"调整分区 <filename>%1</filename> 上的 JFS 文件系统大小失败：首次挂载失败。"

#: fs/xfs.cpp:170
msgctxt "@info/plain"
msgid ""
"Resizing XFS file system on partition <filename>%1</filename> failed: Could "
"not create temp dir."
msgstr ""
"调整分区 <filename>%1</filename> 上的 XFS 文件系统大小失败：无法创建临时目"
"录。"

#: fs/xfs.cpp:185
msgctxt "@info/plain"
msgid ""
"Resizing XFS file system on partition <filename>%1</filename> failed: "
"xfs_growfs failed."
msgstr ""
"调整分区 <filename>%1</filename> 上的 XFS 文件系统大小失败：xfs_growfs 失败。"

#: fs/xfs.cpp:190
msgctxt "@info/plain"
msgid ""
"Warning: Resizing XFS file system on partition <filename>%1</filename>: "
"Unmount failed."
msgstr ""
"警告：调整分区 <filename>%1</filename> 上的 XFS 文件系统大小：卸载失败。"

#: fs/xfs.cpp:193
msgctxt "@info/plain"
msgid ""
"Resizing XFS file system on partition <filename>%1</filename> failed: "
"Initial mount failed."
msgstr ""
"调整分区 <filename>%1</filename> 上的 XFS 文件系统大小失败：首次挂载失败。"

#: fs/filesystem.cpp:272
msgctxt "@item/plain filesystem name"
msgid "unknown"
msgstr "未知"

#: fs/filesystem.cpp:273
msgctxt "@item/plain filesystem name"
msgid "extended"
msgstr "extended"

#: fs/filesystem.cpp:275
msgctxt "@item/plain filesystem name"
msgid "ext2"
msgstr "ext2"

#: fs/filesystem.cpp:276
msgctxt "@item/plain filesystem name"
msgid "ext3"
msgstr "ext3"

#: fs/filesystem.cpp:277
msgctxt "@item/plain filesystem name"
msgid "ext4"
msgstr "ext4"

#: fs/filesystem.cpp:278
msgctxt "@item/plain filesystem name"
msgid "linuxswap"
msgstr "linuxswap"

#: fs/filesystem.cpp:279
msgctxt "@item/plain filesystem name"
msgid "fat16"
msgstr "fat16"

#: fs/filesystem.cpp:280
msgctxt "@item/plain filesystem name"
msgid "fat32"
msgstr "fat32"

#: fs/filesystem.cpp:281
msgctxt "@item/plain filesystem name"
msgid "ntfs"
msgstr "ntfs"

#: fs/filesystem.cpp:282
msgctxt "@item/plain filesystem name"
msgid "reiser"
msgstr "reiser"

#: fs/filesystem.cpp:283
msgctxt "@item/plain filesystem name"
msgid "reiser4"
msgstr "reiser4"

#: fs/filesystem.cpp:284
msgctxt "@item/plain filesystem name"
msgid "xfs"
msgstr "xfs"

#: fs/filesystem.cpp:285
msgctxt "@item/plain filesystem name"
msgid "jfs"
msgstr "jfs"

#: fs/filesystem.cpp:286
msgctxt "@item/plain filesystem name"
msgid "hfs"
msgstr "hfs"

#: fs/filesystem.cpp:287
msgctxt "@item/plain filesystem name"
msgid "hfsplus"
msgstr "hfsplus"

#: fs/filesystem.cpp:288
msgctxt "@item/plain filesystem name"
msgid "ufs"
msgstr "ufs"

#: fs/filesystem.cpp:289
msgctxt "@item/plain filesystem name"
msgid "unformatted"
msgstr "未格式化"

#: fs/filesystem.cpp:290
msgctxt "@item/plain filesystem name"
msgid "btrfs"
msgstr "btrfs"

#: fs/filesystem.cpp:291
msgctxt "@item/plain filesystem name"
msgid "hpfs"
msgstr "hpfs"

#: fs/filesystem.cpp:292
msgctxt "@item/plain filesystem name"
msgid "luks"
msgstr "luks"

#: fs/filesystem.cpp:293
msgctxt "@item/plain filesystem name"
msgid "ocfs2"
msgstr "ocfs2"

#: fs/filesystem.cpp:294
msgctxt "@item/plain filesystem name"
msgid "zfs"
msgstr "zfs"

#: fs/filesystem.cpp:295
msgctxt "@item/plain filesystem name"
msgid "exfat"
msgstr ""

#: fs/filesystem.cpp:296
msgctxt "@item/plain filesystem name"
msgid "nilfs2"
msgstr ""

#: fs/filesystem.cpp:297
msgctxt "@item/plain filesystem name"
msgid "lvm2 pv"
msgstr ""

#: fs/filesystem.cpp:341
msgctxt "@title:menu"
msgid "Mount"
msgstr "挂载"

#: fs/filesystem.cpp:347
msgctxt "@title:menu"
msgid "Unmount"
msgstr "卸载"

#: fs/luks.cpp:91
msgctxt "@title:menu"
msgid "Decrypt"
msgstr ""

#: fs/luks.cpp:96
#, fuzzy
msgctxt "@title:menu"
msgid "Deactivate"
msgstr "取消激活交换分区"

#: fs/jfs.cpp:162
msgctxt "@info/plain"
msgid ""
"Resizing JFS file system on partition <filename>%1</filename> failed: Could "
"not create temp dir."
msgstr ""
"调整分区 <filename>%1</filename> 上的 JFS 文件系统大小失败：无法创建临时目"
"录。"

#: fs/jfs.cpp:177
msgctxt "@info/plain"
msgid ""
"Resizing JFS file system on partition <filename>%1</filename> failed: "
"Remount failed."
msgstr ""
"调整分区 <filename>%1</filename> 上的 JFS 文件系统大小失败：重新挂载失败。"

#: fs/jfs.cpp:182
msgctxt "@info/plain"
msgid ""
"Warning: Resizing JFS file system on partition <filename>%1</filename>: "
"Unmount failed."
msgstr "警告：调整分区 <filename>%1</filename> 上的 JFS 文件系统：卸载失败。"

#: fs/jfs.cpp:185
msgctxt "@info/plain"
msgid ""
"Resizing JFS file system on partition <filename>%1</filename> failed: "
"Initial mount failed."
msgstr ""
"调整分区 <filename>%1</filename> 上的 JFS 文件系统大小失败：首次挂载失败。"

#: main.cpp:38
msgctxt "@info:shell"
msgid "Do not try to gain super user privileges"
msgstr "不要尝试获得超级用户权限"

#: main.cpp:39
msgctxt "@info:shell"
msgid "Show advanced tab in configuration dialog"
msgstr "在配置对话框中显示高级标签"

#: main.cpp:40
msgctxt "@info:shell"
msgid "Device(s) to manage"
msgstr "要管理的设备"

#: ops/resizeoperation.cpp:165
msgctxt "@info/plain"
msgid "Moving extended partition <filename>%1</filename> failed."
msgstr "移动扩展分区 <filename>%1</filename> 失败。"

#: ops/resizeoperation.cpp:175
msgctxt "@info/plain"
msgid "Checking partition <filename>%1</filename> after resize/move failed."
msgstr "调整大小/移动后检查分区 <filename>%1</filename> 失败。"

#: ops/resizeoperation.cpp:178
msgctxt "@info/plain"
msgid "Resizing/moving partition <filename>%1</filename> failed."
msgstr "移动/调整分区 <filename>%1</filename> 大小失败。"

#: ops/resizeoperation.cpp:182
msgctxt "@info/plain"
msgid "Checking partition <filename>%1</filename> before resize/move failed."
msgstr "调整大小/移动前检查分区 <filename>%1</filename> 失败。"

#: ops/resizeoperation.cpp:186 ops/restoreoperation.cpp:165
#: ops/operation.cpp:178 ops/copyoperation.cpp:194
msgctxt "@info/plain status (success, error, warning...) of operation"
msgid "%1: %2"
msgstr "%1：%2"

#: ops/resizeoperation.cpp:213
msgctxt "@info/plain describe resize/move action"
msgid "Move partition <filename>%1</filename> to the left by %2"
msgstr "将分区 <filename>%1</filename> 移动到 %2 左边"

#: ops/resizeoperation.cpp:216
msgctxt "@info/plain describe resize/move action"
msgid "Move partition <filename>%1</filename> to the right by %2"
msgstr "将分区 <filename>%1</filename> 移动到 %2 右边"

#: ops/resizeoperation.cpp:219
msgctxt "@info/plain describe resize/move action"
msgid "Grow partition <filename>%1</filename> from %2 to %3"
msgstr "将分区 <filename>%1</filename> 从 %2 增大到 %3"

#: ops/resizeoperation.cpp:222
msgctxt "@info/plain describe resize/move action"
msgid "Shrink partition <filename>%1</filename> from %2 to %3"
msgstr "将分区 <filename>%1</filename> 从 %2 缩小到 %3"

#: ops/resizeoperation.cpp:225
msgctxt "@info/plain describe resize/move action"
msgid ""
"Move partition <filename>%1</filename> to the left by %2 and grow it from %3 "
"to %4"
msgstr "将分区 <filename>%1</filename> 移动到 %2 左边并将其从 %3 增大到 %4"

#: ops/resizeoperation.cpp:228
msgctxt "@info/plain describe resize/move action"
msgid ""
"Move partition <filename>%1</filename> to the right by %2 and grow it from "
"%3 to %4"
msgstr "将分区 <filename>%1</filename> 移动到 %2 右边并将其从 %3 增大到 %4"

#: ops/resizeoperation.cpp:231
msgctxt "@info/plain describe resize/move action"
msgid ""
"Move partition <filename>%1</filename> to the left by %2 and shrink it from "
"%3 to %4"
msgstr "将分区 <filename>%1</filename> 移动到 %2 左边并将其从 %3 缩小到 %4"

#: ops/resizeoperation.cpp:234
msgctxt "@info/plain describe resize/move action"
msgid ""
"Move partition <filename>%1</filename> to the right by %2 and shrink it from "
"%3 to %4"
msgstr "将分区 <filename>%1</filename> 移动到 %2 右边并将其从 %3 缩小到 %4"

#: ops/resizeoperation.cpp:241
msgctxt "@info/plain describe resize/move action"
msgid "Unknown resize/move action."
msgstr "未知调整大小移动动作。"

#: ops/resizeoperation.cpp:271
msgctxt "@info/plain"
msgid ""
"Resize/move failed: Could not resize file system to shrink partition "
"<filename>%1</filename>."
msgstr ""
"调整大小/移动失败：无法调整文件系统来缩小分区 <filename>%1</filename>。"

#: ops/resizeoperation.cpp:277
msgctxt "@info/plain"
msgid "Resize/move failed: Could not shrink partition <filename>%1</filename>."
msgstr "调整大小/移动失败：无法缩小分区 <filename>%1</filename>。"

#: ops/resizeoperation.cpp:297
msgctxt "@info/plain"
msgid "Moving partition <filename>%1</filename> failed."
msgstr "移动分区 <filename>%1</filename> 失败。"

#: ops/resizeoperation.cpp:303
msgctxt "@info/plain"
msgid ""
"Moving the filesystem for partition <filename>%1</filename> failed. Rolling "
"back."
msgstr "移动文件系统或分区 <filename>%1</filename> 失败。正在回滚。"

#: ops/resizeoperation.cpp:307
msgctxt "@info/plain"
msgid ""
"Moving back partition <filename>%1</filename> to its original position "
"failed."
msgstr "将分区 <filename>%1</filename> 移回其原始位置失败。"

#: ops/resizeoperation.cpp:321
msgctxt "@info/plain"
msgid "Resize/move failed: Could not grow partition <filename>%1</filename>."
msgstr "调整大小/移动失败：无法增大分区 <filename>%1</filename>。"

#: ops/resizeoperation.cpp:327
msgctxt "@info/plain"
msgid ""
"Resize/move failed: Could not resize the file system on partition <filename>"
"%1</filename>"
msgstr "调整大小/移动失败：无法调整分区 <filename>%1</filename> 上的文件系统。"

#: ops/resizeoperation.cpp:330
msgctxt "@info/plain"
msgid ""
"Could not restore old partition size for partition <filename>%1</filename>."
msgstr "无法为分区 <filename>%1</filename> 还原旧分区大小。"

#: ops/deleteoperation.cpp:86
msgctxt "@info/plain"
msgid "Shred partition <filename>%1</filename> (%2, %3)"
msgstr "粉碎分区 <filename>%1</filename> (%2，%3)"

#: ops/deleteoperation.cpp:88
msgctxt "@info/plain"
msgid "Delete partition <filename>%1</filename> (%2, %3)"
msgstr "删除分区 <filename>%1</filename> (%2，%3)"

#: ops/setpartflagsoperation.cpp:77
msgctxt "@info/plain"
msgid "Set flags for partition <filename>%1</filename> to \"%2\""
msgstr "将分区 <filename>%1</filename> 的标记设定为“%2”"

#: ops/restoreoperation.cpp:144 ops/copyoperation.cpp:165
msgctxt "@info/plain"
msgid ""
"Warning: Maximizing file system on target partition <filename>%1</filename> "
"to the size of the partition failed."
msgstr ""
"警告：最大化目标分区 <filename>%1</filename> 上的文件系统至分区大小失败。"

#: ops/restoreoperation.cpp:147
msgctxt "@info/plain"
msgid ""
"Checking target file system on partition <filename>%1</filename> after the "
"restore failed."
msgstr "还原失败后检查目标分区 <filename>%1</filename> 上的文件系统。"

#: ops/restoreoperation.cpp:154
msgctxt "@info/plain"
msgid "Restoring file system failed."
msgstr "还原文件系统失败。"

#: ops/restoreoperation.cpp:158
msgctxt "@info/plain"
msgid "Creating the destination partition to restore to failed."
msgstr "创建要还原的目标分区失败。"

#: ops/restoreoperation.cpp:173
msgctxt "@info/plain"
msgid ""
"Restore partition from <filename>%1</filename> to <filename>%2</filename>"
msgstr "从 <filename>%1</filename> 还原分区到 <filename>%2</filename>"

#: ops/restoreoperation.cpp:175
msgctxt "@info/plain"
msgid ""
"Restore partition on <filename>%1</filename> at %2 from <filename>%3</"
"filename>"
msgstr "从 <filename>%3</filename> 还原分区到 %2 的 <filename>%1</filename>"

#: ops/newoperation.cpp:113
msgctxt "@info/plain"
msgid "Create a new partition (%1, %2) on <filename>%3</filename>"
msgstr "在 <filename>%3</filename> 上创建新分区 (%1，%2)"

#: ops/createfilesystemoperation.cpp:97
msgctxt "@info/plain"
msgid "Create filesystem %1 on partition <filename>%2</filename>"
msgstr "在分区 <filename>%2</filename> 上创建文件系统 %1"

#: ops/operation.cpp:75
msgctxt "@info:progress operation"
msgid "None"
msgstr "无"

#: ops/operation.cpp:76
msgctxt "@info:progress operation"
msgid "Pending"
msgstr "待执行"

#: ops/operation.cpp:77
msgctxt "@info:progress operation"
msgid "Running"
msgstr "运行中"

#: ops/operation.cpp:78
msgctxt "@info:progress operation"
msgid "Success"
msgstr "成功"

#: ops/operation.cpp:79
msgctxt "@info:progress operation"
msgid "Warning"
msgstr "警告"

#: ops/operation.cpp:80
msgctxt "@info:progress operation"
msgid "Error"
msgstr "错误"

#: ops/checkoperation.cpp:62
msgctxt "@info/plain"
msgid "Check and repair partition <filename>%1</filename> (%2, %3)"
msgstr "检查并修复分区 <filename>%1</filename> (%2，%3)"

#: ops/copyoperation.cpp:170
msgctxt "@info/plain"
msgid "Checking target partition <filename>%1</filename> after copy failed."
msgstr "复制失败后检查目标分区 <filename>%1</filename>。"

#: ops/copyoperation.cpp:180
msgctxt "@info/plain"
msgid "Copying source to target partition failed."
msgstr "复制来源到目标分区失败。"

#: ops/copyoperation.cpp:184
msgctxt "@info/plain"
msgid "Creating target partition for copying failed."
msgstr "创建用于复制的目标分区失败。"

#: ops/copyoperation.cpp:187
msgctxt "@info/plain"
msgid "Checking source partition <filename>%1</filename> failed."
msgstr "检查来源分区 <filename>%1</filename> 失败。"

#: ops/copyoperation.cpp:204
msgctxt "@info/plain"
msgid ""
"Copy partition <filename>%1</filename> (%2, %3) to <filename>%4</filename> "
"(%5, %6)"
msgstr ""
"复制分区 <filename>%1</filename> (%2，%3)到 <filename>%4</filename> (%5，%6)"

#: ops/copyoperation.cpp:213
msgctxt "@info/plain"
msgid ""
"Copy partition <filename>%1</filename> (%2, %3) to <filename>%4</filename> "
"(%5, %6) and grow it to %7"
msgstr ""
"复制分区 <filename>%1</filename> (%2，%3)到 <filename>%4</filename> (%5，%6)"
"并将其增大到 %7"

#: ops/copyoperation.cpp:225
msgctxt "@info/plain"
msgid ""
"Copy partition <filename>%1</filename> (%2, %3) to unallocated space "
"(starting at %4) on <filename>%5</filename>"
msgstr ""
"复制分区 <filename>%1</filename> (%2，%3)到 <filename>%5</filename> 上的未分"
"配空间(起始于 %4)"

#: ops/copyoperation.cpp:233
msgctxt "@info/plain"
msgid ""
"Copy partition <filename>%1</filename> (%2, %3) to unallocated space "
"(starting at %4) on <filename>%5</filename> and grow it to %6"
msgstr ""
"复制分区 <filename>%1</filename> (%2，%3)到 <filename>%5</filename> 上的未分"
"配空间(起始于 %4)并将其增大到 %6"

#: ops/createpartitiontableoperation.cpp:103
msgctxt "@info/plain"
msgid "Create a new partition table (type: %1) on <filename>%2</filename>"
msgstr "在 <filename>%2</filename> 上创建新分区表(类型: %1)"

#: ops/backupoperation.cpp:51
msgctxt "@info/plain"
msgid ""
"Backup partition <filename>%1</filename> (%2, %3) to <filename>%4</filename>"
msgstr "备份分区 <filename>%1</filename> (%2，%3)到 <filename>%4</filename>"

#: ops/setfilesystemlabeloperation.cpp:71
msgctxt "@info/plain"
msgid "Set label for partition <filename>%1</filename> to \"%2\""
msgstr "将分区 <filename>%1</filename> 的标签设定为“%2”"

#: ops/setfilesystemlabeloperation.cpp:73
msgctxt "@info/plain"
msgid "Set label for partition <filename>%1</filename> from \"%2\" to \"%3\""
msgstr "将分区 <filename>%1</filename> 的标签从“%2”设定为“%3”"

#: core/partition.cpp:161
msgctxt "@item partition name"
msgid "unallocated"
msgstr "未分配"

#: core/partition.cpp:164
msgctxt "@item partition name"
msgid "New Partition"
msgstr "新分区"

#: core/partition.cpp:167
msgctxt "@item partition name"
msgid "Restored Partition"
msgstr "已还原分区"

#: core/partition.cpp:170
msgctxt "@item partition name"
msgid "Copy of %1"
msgstr "%1 的副本"

#: core/partitiontable.cpp:158
msgctxt "@item partition flag"
msgid "boot"
msgstr "boot"

#: core/partitiontable.cpp:159
msgctxt "@item partition flag"
msgid "root"
msgstr "root"

#: core/partitiontable.cpp:160
msgctxt "@item partition flag"
msgid "swap"
msgstr "swap"

#: core/partitiontable.cpp:161
msgctxt "@item partition flag"
msgid "hidden"
msgstr "hidden"

#: core/partitiontable.cpp:162
msgctxt "@item partition flag"
msgid "raid"
msgstr "raid"

#: core/partitiontable.cpp:163
msgctxt "@item partition flag"
msgid "lvm"
msgstr "lvm"

#: core/partitiontable.cpp:164
msgctxt "@item partition flag"
msgid "lba"
msgstr "lba"

#: core/partitiontable.cpp:165
msgctxt "@item partition flag"
msgid "hpservice"
msgstr "hpservice"

#: core/partitiontable.cpp:166
msgctxt "@item partition flag"
msgid "palo"
msgstr "palo"

#: core/partitiontable.cpp:167
msgctxt "@item partition flag"
msgid "prep"
msgstr "prep"

#: core/partitiontable.cpp:168
msgctxt "@item partition flag"
msgid "msft-reserved"
msgstr "msft-reserved"

#: core/partitiontable.cpp:404
msgctxt "@item/plain partition table name"
msgid "unknown"
msgstr "未知"

#: core/partitionalignment.cpp:89
msgctxt "@info/plain"
msgid ""
"Partition <filename>%1</filename> is not properly aligned (first sector: %2, "
"modulo: %3)."
msgstr "分区 <filename>%1</filename> 未对齐(首扇区：%2，模：%3)。"

#: core/partitionalignment.cpp:92
msgctxt "@info/plain"
msgid ""
"Partition <filename>%1</filename> is not properly aligned (last sector: %2, "
"modulo: %3)."
msgstr "分区 <filename>%1</filename> 未对齐(尾扇区：%2，模：%3)。"

#: core/operationstack.cpp:112
msgctxt "@info/plain"
msgid ""
"Deleting a partition just created: Undoing the operation to create the "
"partition."
msgstr "删除刚创建的分区：撤销创建分区的操作。"

#: core/operationstack.cpp:131
msgctxt "@info/plain"
msgid ""
"Resizing a partition just created: Updating start and end in existing "
"operation."
msgstr "调整刚创建的分区大小：更新已有操作的起始和结束点。"

#: core/operationstack.cpp:152
msgctxt "@info/plain"
msgid "Copying a new partition: Creating a new partition instead."
msgstr "复制新分区：创建新分区而代之。"

#: core/operationstack.cpp:170
msgctxt "@info/plain"
msgid "Changing label for a new partition: No new operation required."
msgstr "更改新分区标签：不需要新的操作。"

#: core/operationstack.cpp:184
msgctxt "@info/plain"
msgid "Changing file system for a new partition: No new operation required."
msgstr "更改新分区的文件系统：不需要新的操作。"

#: core/operationstack.cpp:202
msgctxt "@info/plain"
msgid ""
"Checking file systems is automatically done when creating them: No new "
"operation required."
msgstr "检查文件系统在创建时会自动完成：不需要新的操作。"

#: core/operationstack.cpp:251
msgctxt "@info/plain"
msgid "Deleting a partition just copied: Removing the copy."
msgstr "删除刚复制的分区：删除副本。"

#: core/operationstack.cpp:258
msgctxt "@info/plain"
msgid ""
"Deleting a partition just copied over an existing partition: Removing the "
"copy and deleting the existing partition."
msgstr "删除刚复制已有分区的分区副本：删除该副本并删除已有分区。"

#: core/operationstack.cpp:272
msgctxt "@info/plain"
msgid ""
"Copying a partition that is itself a copy: Copying the original source "
"partition instead."
msgstr "复制的分区本身就是一个副本：转而复制原始分区。"

#: core/operationstack.cpp:303
msgctxt "@info/plain"
msgid "Deleting a partition just restored: Removing the restore operation."
msgstr "删除刚还原的分区：删除还原操作。"

#: core/operationstack.cpp:310
msgctxt "@info/plain"
msgid ""
"Deleting a partition just restored to an existing partition: Removing the "
"restore operation and deleting the existing partition."
msgstr "删除刚还原到已有分区的分区：删除该还原操作并删除已有分区。"

#: core/operationstack.cpp:344
msgctxt "@info/plain"
msgid "Changing flags again for the same partition: Removing old operation."
msgstr "再次更改相同分区的标记：删除旧的操作。"

#: core/operationstack.cpp:376
msgctxt "@info/plain"
msgid "Changing label again for the same partition: Removing old operation."
msgstr "再次更改相同分区的标签：删除旧的操作。"

#: core/operationstack.cpp:403
#, fuzzy
msgctxt "@info/plain"
msgid "Creating new partition table, discarding previous operation on device."
msgstr "在设备上创建新的空分区列表。"

#: core/operationstack.cpp:454
msgctxt "@info/plain"
msgid "Add operation: %1"
msgstr "添加操作：%1"

#: core/partitionrole.cpp:29
msgctxt "@item partition role"
msgid "unallocated"
msgstr "未分配"

#: core/partitionrole.cpp:32
msgctxt "@item partition role"
msgid "logical"
msgstr "逻辑分区"

#: core/partitionrole.cpp:35
msgctxt "@item partition role"
msgid "extended"
msgstr "扩展分区"

#: core/partitionrole.cpp:38
msgctxt "@item partition role"
msgid "primary"
msgstr "主分区"

#: core/partitionrole.cpp:40
msgctxt "@item partition role"
msgid "none"
msgstr "无"

#: core/device.cpp:90
msgid "Unknown Device"
msgstr "未知设备"

#: core/smartattribute.cpp:55
msgctxt "@item:intable"
msgid "failing"
msgstr ""

#: core/smartattribute.cpp:58
msgctxt "@item:intable"
msgid "has failed"
msgstr "失败"

#: core/smartattribute.cpp:61
msgctxt "@item:intable"
msgid "warning"
msgstr "警告"

#: core/smartattribute.cpp:64
msgctxt "@item:intable"
msgid "good"
msgstr ""

#: core/smartattribute.cpp:68 core/smartattribute.cpp:96
msgctxt "@item:intable not applicable"
msgid "N/A"
msgstr "不可用"

#: core/smartattribute.cpp:83
msgctxt "@item:intable"
msgid "%1 sector"
msgid_plural "%1 sectors"
msgstr[0] "%1 个扇区"

#: core/smartattribute.cpp:114
msgctxt "SMART attr name"
msgid "Read Error Rate"
msgstr "读错误率"

#: core/smartattribute.cpp:114
msgctxt "SMART attr description"
msgid "Rate of hardware read errors while reading data from the disk surface."
msgstr ""

#: core/smartattribute.cpp:115
msgctxt "SMART attr name"
msgid "Throughput Performance"
msgstr ""

#: core/smartattribute.cpp:115
msgctxt "SMART attr description"
msgid ""
"Overall (general) throughput performance of a hard disk drive. If the value "
"of this attribute is decreasing there is a high probability that there is a "
"problem with the disk."
msgstr ""

#: core/smartattribute.cpp:116
msgctxt "SMART attr name"
msgid "Spin-Up Time"
msgstr ""

#: core/smartattribute.cpp:116
msgctxt "SMART attr description"
msgid "Average time of spindle spin up from zero RPM to fully operational."
msgstr ""

#: core/smartattribute.cpp:117
msgctxt "SMART attr name"
msgid "Start/Stop Count"
msgstr "开始停止数"

#: core/smartattribute.cpp:117
msgctxt "SMART attr description"
msgid "A tally of spindle start/stop cycles."
msgstr ""

#: core/smartattribute.cpp:118
msgctxt "SMART attr name"
msgid "Reallocated Sectors Count"
msgstr ""

#: core/smartattribute.cpp:118
msgctxt "SMART attr description"
msgid ""
"Count of reallocated sectors. When the hard drive finds a read/write/"
"verification error, it marks this sector as &quot;reallocated&quot; and "
"transfers data to a special reserved area (spare area)."
msgstr ""

#: core/smartattribute.cpp:119
msgctxt "SMART attr name"
msgid "Read Channel Margin"
msgstr ""

#: core/smartattribute.cpp:119
msgctxt "SMART attr description"
msgid ""
"Margin of a channel while reading data. The function of this attribute is "
"not specified."
msgstr ""

#: core/smartattribute.cpp:120
msgctxt "SMART attr name"
msgid "Seek Error Rate"
msgstr ""

#: core/smartattribute.cpp:120
msgctxt "SMART attr description"
msgid ""
"Rate of seek errors of the magnetic heads. If there is a partial failure in "
"the mechanical positioning system, then seek errors will arise."
msgstr ""

#: core/smartattribute.cpp:121
msgctxt "SMART attr name"
msgid "Seek Time Performance"
msgstr ""

#: core/smartattribute.cpp:121
msgctxt "SMART attr description"
msgid ""
"Average performance of seek operations of the magnetic heads. If this "
"attribute is decreasing, it is a sign of problems in the mechanical "
"subsystem."
msgstr ""

#: core/smartattribute.cpp:122
msgctxt "SMART attr name"
msgid "Power-On Hours"
msgstr ""

#: core/smartattribute.cpp:122
msgctxt "SMART attr description"
msgid "Count of hours in power-on state."
msgstr ""

#: core/smartattribute.cpp:123
msgctxt "SMART attr name"
msgid "Spin Retry Count"
msgstr ""

#: core/smartattribute.cpp:123
msgctxt "SMART attr description"
msgid ""
"Count of retry of spin start attempts if the first attempt was unsuccessful. "
"An increase of this attribute value is a sign of problems in the hard disk "
"mechanical subsystem."
msgstr ""

#: core/smartattribute.cpp:124
msgctxt "SMART attr name"
msgid "Recalibration Retries"
msgstr ""

#: core/smartattribute.cpp:124
msgctxt "SMART attr description"
msgid ""
"Count of recalibrations requested if the first attempt was unsuccessful. An "
"increase of this attribute value is a sign of problems in the hard disk "
"mechanical subsystem."
msgstr ""

#: core/smartattribute.cpp:125
msgctxt "SMART attr name"
msgid "Power Cycle Count"
msgstr ""

#: core/smartattribute.cpp:125
msgctxt "SMART attr description"
msgid "Count of full hard disk power on/off cycles."
msgstr ""

#: core/smartattribute.cpp:126 core/smartattribute.cpp:145
msgctxt "SMART attr name"
msgid "Soft Read Error Rate"
msgstr ""

#: core/smartattribute.cpp:126
msgctxt "SMART attr description"
msgid "Uncorrected read errors reported to the operating system."
msgstr ""

#: core/smartattribute.cpp:127
msgctxt "SMART attr name"
msgid "SATA Downshift Error Count"
msgstr ""

#: core/smartattribute.cpp:127
msgctxt "SMART attr description"
msgid "Western Digital and Samsung attribute."
msgstr ""

#: core/smartattribute.cpp:128
msgctxt "SMART attr name"
msgid "End-to-End Error"
msgstr ""

#: core/smartattribute.cpp:128
msgctxt "SMART attr description"
msgid ""
"Part of HP's SMART IV technology: After transferring through the cache RAM "
"data buffer the parity data between the host and the hard drive did not "
"match."
msgstr ""

#: core/smartattribute.cpp:129
msgctxt "SMART attr name"
msgid "Head Stability"
msgstr ""

#: core/smartattribute.cpp:129 core/smartattribute.cpp:130
msgctxt "SMART attr description"
msgid "Western Digital attribute."
msgstr ""

#: core/smartattribute.cpp:130
msgctxt "SMART attr name"
msgid "Induced Op-Vibration Detection"
msgstr ""

#: core/smartattribute.cpp:131
msgctxt "SMART attr name"
msgid "Reported Uncorrectable Errors"
msgstr ""

#: core/smartattribute.cpp:131
msgctxt "SMART attr description"
msgid "Count of errors that could not be recovered using hardware ECC."
msgstr ""

#: core/smartattribute.cpp:132
msgctxt "SMART attr name"
msgid "Command Timeout"
msgstr "命令超时"

#: core/smartattribute.cpp:132
msgctxt "SMART attr description"
msgid "Count of aborted operations due to HDD timeout."
msgstr ""

#: core/smartattribute.cpp:133
msgctxt "SMART attr name"
msgid "High Fly Writes"
msgstr ""

#: core/smartattribute.cpp:133
msgctxt "SMART attr description"
msgid "Count of fly height errors detected."
msgstr ""

#: core/smartattribute.cpp:134
msgctxt "SMART attr name"
msgid "Temperature Difference From 100"
msgstr ""

#: core/smartattribute.cpp:134
msgctxt "SMART attr description"
msgid ""
"Value is equal to (100 &ndash; temp. °C), allowing manufacturer to set a "
"minimum threshold which corresponds to a maximum temperature."
msgstr ""

#: core/smartattribute.cpp:135
msgctxt "SMART attr name"
msgid "G-sense Error Rate"
msgstr "G-sense 错误率"

#: core/smartattribute.cpp:135
msgctxt "SMART attr description"
msgid "Count of errors resulting from externally-induced shock and vibration."
msgstr ""

#: core/smartattribute.cpp:136
msgctxt "SMART attr name"
msgid "Power Off Retract Count"
msgstr ""

#: core/smartattribute.cpp:136
msgctxt "SMART attr description"
msgid "Count of power-off or emergency retract cycles"
msgstr ""

#: core/smartattribute.cpp:137
msgctxt "SMART attr name"
msgid "Load Cycle Count"
msgstr ""

#: core/smartattribute.cpp:137
msgctxt "SMART attr description"
msgid "Count of load/unload cycles into head landing zone position."
msgstr ""

#: core/smartattribute.cpp:138 core/smartattribute.cpp:166
msgctxt "SMART attr name"
msgid "Temperature"
msgstr "温度"

#: core/smartattribute.cpp:138
msgctxt "SMART attr description"
msgid "Current internal temperature."
msgstr ""

#: core/smartattribute.cpp:139
msgctxt "SMART attr name"
msgid "Hardware ECC Recovered"
msgstr ""

#: core/smartattribute.cpp:139
msgctxt "SMART attr description"
msgid "Count of errors that could be recovered using hardware ECC."
msgstr ""

#: core/smartattribute.cpp:140
msgctxt "SMART attr name"
msgid "Reallocation Event Count"
msgstr ""

#: core/smartattribute.cpp:140
msgctxt "SMART attr description"
msgid ""
"Count of remap operations. The raw value of this attribute shows the total "
"number of attempts to transfer data from reallocated sectors to a spare area."
msgstr ""

#: core/smartattribute.cpp:141
msgctxt "SMART attr name"
msgid "Current Pending Sector Count"
msgstr ""

#: core/smartattribute.cpp:141
msgctxt "SMART attr description"
msgid ""
"Number of &quot;unstable&quot; sectors (waiting to be remapped, because of "
"read errors)."
msgstr ""

#: core/smartattribute.cpp:142
msgctxt "SMART attr name"
msgid "Uncorrectable Sector Count"
msgstr ""

#: core/smartattribute.cpp:142
msgctxt "SMART attr description"
msgid "Count of uncorrectable errors when reading/writing a sector."
msgstr ""

#: core/smartattribute.cpp:143
msgctxt "SMART attr name"
msgid "UltraDMA CRC Error Count"
msgstr ""

#: core/smartattribute.cpp:143
msgctxt "SMART attr description"
msgid ""
"Count of errors in data transfer via the interface cable as determined by "
"ICRC."
msgstr ""

#: core/smartattribute.cpp:144
msgctxt "SMART attr name"
msgid "Multi-Zone Error Rate<br/>Write Error Rate"
msgstr ""

#: core/smartattribute.cpp:144
msgctxt "SMART attr description"
msgid "The total number of errors when writing a sector."
msgstr ""

#: core/smartattribute.cpp:145
#, fuzzy
msgctxt "SMART attr description"
msgid "Number of off-track errors."
msgstr "扇区数量："

#: core/smartattribute.cpp:146
msgctxt "SMART attr name"
msgid "Data Address Mark Errors"
msgstr ""

#: core/smartattribute.cpp:146
msgctxt "SMART attr description"
msgid "Number of Data Address Mark errors (or vendor-specific)."
msgstr ""

#: core/smartattribute.cpp:147
msgctxt "SMART attr name"
msgid "Run Out Cancel"
msgstr ""

#: core/smartattribute.cpp:147
msgctxt "SMART attr description"
msgid "Number of ECC errors"
msgstr "ECC 错误数"

#: core/smartattribute.cpp:148
msgctxt "SMART attr name"
msgid "Soft ECC Correction"
msgstr ""

#: core/smartattribute.cpp:148
msgctxt "SMART attr description"
msgid "Number of errors corrected by software ECC"
msgstr ""

#: core/smartattribute.cpp:149
msgctxt "SMART attr name"
msgid "Thermal Asperity Rate"
msgstr ""

#: core/smartattribute.cpp:149
msgctxt "SMART attr description"
msgid "Number of errors due to high temperature."
msgstr ""

#: core/smartattribute.cpp:150
msgctxt "SMART attr name"
msgid "Flying Height"
msgstr ""

#: core/smartattribute.cpp:150
msgctxt "SMART attr description"
msgid ""
"Height of heads above the disk surface. A flying height that is too low "
"increases the chances of a head crash while a flying height that is too high "
"increases the chances of a read/write error."
msgstr ""

#: core/smartattribute.cpp:151
msgctxt "SMART attr name"
msgid "Spin High Current"
msgstr ""

#: core/smartattribute.cpp:151
msgctxt "SMART attr description"
msgid "Amount of surge current used to spin up the drive."
msgstr ""

#: core/smartattribute.cpp:152
msgctxt "SMART attr name"
msgid "Spin Buzz"
msgstr ""

#: core/smartattribute.cpp:152
msgctxt "SMART attr description"
msgid ""
"Number of buzz routines needed to spin up the drive due to insufficient "
"power."
msgstr ""

#: core/smartattribute.cpp:153
msgctxt "SMART attr name"
msgid "Offline Seek Performance"
msgstr ""

#: core/smartattribute.cpp:153
msgctxt "SMART attr description"
msgid "Drive's seek performance during its internal tests."
msgstr ""

#: core/smartattribute.cpp:154
msgctxt "SMART attr name"
msgid "Vibration During Write"
msgstr ""

#: core/smartattribute.cpp:154
msgctxt "SMART attr description"
msgid "Vibration During Write"
msgstr ""

#: core/smartattribute.cpp:155
msgctxt "SMART attr name"
msgid "Shock During Write"
msgstr ""

#: core/smartattribute.cpp:155
msgctxt "SMART attr description"
msgid "Shock During Write"
msgstr ""

#: core/smartattribute.cpp:156
msgctxt "SMART attr name"
msgid "Disk Shift"
msgstr ""

#: core/smartattribute.cpp:156
msgctxt "SMART attr description"
msgid ""
"Distance the disk has shifted relative to the spindle (usually due to shock "
"or temperature)."
msgstr ""

#: core/smartattribute.cpp:157
msgctxt "SMART attr name"
msgid "G-Sense Error Rate"
msgstr "G-Sense 错误率"

#: core/smartattribute.cpp:157
msgctxt "SMART attr description"
msgid ""
"The number of errors resulting from externally-induced shock and vibration."
msgstr ""

#: core/smartattribute.cpp:158
msgctxt "SMART attr name"
msgid "Loaded Hours"
msgstr ""

#: core/smartattribute.cpp:158
msgctxt "SMART attr description"
msgid "Time spent operating under data load."
msgstr ""

#: core/smartattribute.cpp:159
msgctxt "SMART attr name"
msgid "Load/Unload Retry Count"
msgstr ""

#: core/smartattribute.cpp:159
msgctxt "SMART attr description"
msgid "Number of times head changes position."
msgstr ""

#: core/smartattribute.cpp:160
#, fuzzy
msgctxt "SMART attr name"
msgid "Load Friction"
msgstr "分区"

#: core/smartattribute.cpp:160
msgctxt "SMART attr description"
msgid "Resistance caused by friction in mechanical parts while operating."
msgstr ""

#: core/smartattribute.cpp:161
msgctxt "SMART attr name"
msgid "Load/Unload Cycle Count"
msgstr ""

#: core/smartattribute.cpp:161
msgctxt "SMART attr description"
msgid "Total number of load cycles."
msgstr ""

#: core/smartattribute.cpp:162
msgctxt "SMART attr name"
msgid "Load-In Time"
msgstr ""

#: core/smartattribute.cpp:162
msgctxt "SMART attr description"
msgid ""
"Total time of loading on the magnetic heads actuator (time not spent in "
"parking area)."
msgstr ""

#: core/smartattribute.cpp:163
msgctxt "SMART attr name"
msgid "Torque Amplification Count"
msgstr ""

#: core/smartattribute.cpp:163
msgctxt "SMART attr description"
msgid "Number of attempts to compensate for platter speed variations."
msgstr ""

#: core/smartattribute.cpp:164
msgctxt "SMART attr name"
msgid "Power-Off Retract Cycle"
msgstr ""

#: core/smartattribute.cpp:164
msgctxt "SMART attr description"
msgid ""
"The number of times the magnetic armature was retracted automatically as a "
"result of cutting power."
msgstr ""

#: core/smartattribute.cpp:165
msgctxt "SMART attr name"
msgid "GMR Head Amplitude"
msgstr ""

#: core/smartattribute.cpp:165
msgctxt "SMART attr description"
msgid ""
"Amplitude of &quot;thrashing&quot; (distance of repetitive forward/reverse "
"head motion)"
msgstr ""

#: core/smartattribute.cpp:166
msgctxt "SMART attr description"
msgid "Drive Temperature"
msgstr "驱动器温度"

#: core/smartattribute.cpp:167
msgctxt "SMART attr name"
msgid "Endurance Remaining"
msgstr ""

#: core/smartattribute.cpp:167
msgctxt "SMART attr description"
msgid ""
"Count of physical erase cycles completed on the drive as a percentage of the "
"maximum physical erase cycles the drive supports"
msgstr ""

#: core/smartattribute.cpp:168
msgctxt "SMART attr name"
msgid "Power-On Seconds"
msgstr ""

#: core/smartattribute.cpp:168
msgctxt "SMART attr description"
msgid "Time elapsed in the power-on state"
msgstr ""

#: core/smartattribute.cpp:169
msgctxt "SMART attr name"
msgid "Unrecoverable ECC Count"
msgstr ""

#: core/smartattribute.cpp:169
msgctxt "SMART attr description"
msgid "Count of unrecoverable ECC errors"
msgstr ""

#: core/smartattribute.cpp:170
msgctxt "SMART attr name"
msgid "Good Block Rate"
msgstr ""

#: core/smartattribute.cpp:170
msgctxt "SMART attr description"
msgid ""
"Count of available reserved blocks as percentage of the total number of "
"reserved blocks"
msgstr ""

#: core/smartattribute.cpp:171
msgctxt "SMART attr name"
msgid "Head Flying Hours<br/>or Transfer Error Rate (Fujitsu)"
msgstr ""

#: core/smartattribute.cpp:171
msgctxt "SMART attr description"
msgid ""
"Time while head is positioning<br/>or counts the number of times the link is "
"reset during a data transfer."
msgstr ""

#: core/smartattribute.cpp:172
msgctxt "SMART attr name"
msgid "Total LBAs Written"
msgstr ""

#: core/smartattribute.cpp:172
msgctxt "SMART attr description"
msgid "Total LBAs Written"
msgstr ""

#: core/smartattribute.cpp:173
msgctxt "SMART attr name"
msgid "Total LBAs Read"
msgstr ""

#: core/smartattribute.cpp:173
msgctxt "SMART attr description"
msgid "Total LBAs Read"
msgstr ""

#: core/smartattribute.cpp:174
msgctxt "SMART attr name"
msgid "Read Error Retry Rate"
msgstr ""

#: core/smartattribute.cpp:174
#, fuzzy
msgctxt "SMART attr description"
msgid "Number of errors while reading from a disk"
msgstr "挂载点："

#: core/smartattribute.cpp:175
msgctxt "SMART attr name"
msgid "Free Fall Protection"
msgstr "自由落体保护"

#: core/smartattribute.cpp:175
msgctxt "SMART attr description"
msgid "Number of &quot;Free Fall Events&quot; detected"
msgstr ""

#: core/smartstatus.cpp:209
msgctxt "@item:intable degrees in Celsius and Fahrenheit"
msgid "%1° C / %2° F"
msgstr "%1° C / %2° F"

#: core/smartstatus.cpp:217
msgctxt "@item"
msgid "Aborted"
msgstr "中止"

#: core/smartstatus.cpp:220
msgctxt "@item"
msgid "Interrupted"
msgstr "中断"

#: core/smartstatus.cpp:223
msgctxt "@item"
msgid "Fatal error"
msgstr "致命错误"

#: core/smartstatus.cpp:226
msgctxt "@item"
msgid "Unknown error"
msgstr "未知错误"

#: core/smartstatus.cpp:229
msgctxt "@item"
msgid "Electrical error"
msgstr "电子错误"

#: core/smartstatus.cpp:232
msgctxt "@item"
msgid "Servo error"
msgstr "电机错误"

#: core/smartstatus.cpp:235
msgctxt "@item"
msgid "Read error"
msgstr "读取错误"

#: core/smartstatus.cpp:238
msgctxt "@item"
msgid "Handling error"
msgstr "处理错误"

#: core/smartstatus.cpp:241
msgctxt "@item"
msgid "Self test in progress"
msgstr "正在进行自检"

#: core/smartstatus.cpp:245
msgctxt "@item"
msgid "Success"
msgstr "成功"

#: core/smartstatus.cpp:255
msgctxt "@item"
msgid "Healthy"
msgstr "健康"

#: core/smartstatus.cpp:258
msgctxt "@item"
msgid "Has been used outside of its design parameters in the past."
msgstr ""

#: core/smartstatus.cpp:261
msgctxt "@item"
msgid "Has some bad sectors."
msgstr "包含一些坏扇区。"

#: core/smartstatus.cpp:264
msgctxt "@item"
msgid "Is being used outside of its design parameters right now."
msgstr ""

#: core/smartstatus.cpp:267
msgctxt "@item"
msgid "Has many bad sectors."
msgstr "包含太多坏扇区。"

#: core/smartstatus.cpp:271
msgctxt "@item"
msgid "Disk failure is imminent. Backup all data!"
msgstr ""

#. i18n: file: gui/partitionmanagerui.rc:5
#. i18n: ectx: ToolBar (editToolBar)
#: rc.cpp:3
msgctxt "@title:menu turn on and off edit toolbar"
msgid "Edit Toolbar"
msgstr "编辑工具栏"

#. i18n: file: gui/partitionmanagerui.rc:11
#. i18n: ectx: ToolBar (partitionToolBar)
#: rc.cpp:6
msgctxt "@title:menu"
msgid "Partition Toolbar"
msgstr "分区工具栏"

#. i18n: file: gui/partitionmanagerui.rc:18
#. i18n: ectx: ToolBar (deviceToolBar)
#: rc.cpp:9
msgctxt "@title:menu"
msgid "Device Toolbar"
msgstr "设备工具栏"

#. i18n: file: gui/partitionmanagerui.rc:30
#. i18n: ectx: Menu (view)
#: rc.cpp:12
msgctxt "@title:menu"
msgid "View"
msgstr "查看"

#. i18n: file: gui/partitionmanagerui.rc:40
#. i18n: ectx: Menu (device)
#: rc.cpp:15
msgctxt "@title:menu"
msgid "Device"
msgstr "设备"

#. i18n: file: gui/partitionmanagerui.rc:42
#. i18n: ectx: Menu (selectedDevice)
#: rc.cpp:18
msgctxt "@title:menu"
msgid "Select Current Device"
msgstr "选择当前设备"

#. i18n: file: gui/partitionmanagerui.rc:54
#. i18n: ectx: Menu (partition)
#: rc.cpp:21
msgctxt "@title:menu"
msgid "Partition"
msgstr "分区"

#. i18n: file: config/configurepageadvanced.ui:23
#. i18n: ectx: property (title), widget (QGroupBox, groupBox)
#: rc.cpp:24
msgid "Permissions"
msgstr "权限"

#. i18n: file: config/configurepageadvanced.ui:35
#. i18n: ectx: property (text), widget (QCheckBox, kcfg_allowApplyOperationsAsNonRoot)
#: rc.cpp:27
msgid "Allow applying operations without administrator privileges"
msgstr "无须管理员权限就可以应用操作"

#. i18n: file: config/configurepageadvanced.ui:51
#. i18n: ectx: property (title), widget (QGroupBox, groupBox_5)
#: rc.cpp:30
msgid "Backend"
msgstr "后端"

#. i18n: file: config/configurepageadvanced.ui:57
#. i18n: ectx: property (text), widget (QLabel, label_4)
#: rc.cpp:33
msgid "Active backend:"
msgstr "活动后端："

#. i18n: file: config/configurepageadvanced.ui:79
#. i18n: ectx: property (title), widget (QGroupBox, groupBox_6)
#: rc.cpp:36
msgid "Units"
msgstr "单位"

#. i18n: file: config/configurepageadvanced.ui:85
#. i18n: ectx: property (text), widget (QLabel, label_5)
#: rc.cpp:39
msgid "Preferred unit:"
msgstr ""

#. i18n: file: config/configurepageadvanced.ui:96
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_preferredUnit)
#: rc.cpp:42
msgid "Byte"
msgstr "字节"

#. i18n: file: config/configurepageadvanced.ui:101
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_preferredUnit)
#: rc.cpp:45
msgid "KiB"
msgstr "KiB"

#. i18n: file: config/configurepageadvanced.ui:106
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_preferredUnit)
#: rc.cpp:48
msgid "MiB"
msgstr "MiB"

#. i18n: file: config/configurepageadvanced.ui:111
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_preferredUnit)
#: rc.cpp:51
msgid "GiB"
msgstr "GiB"

#. i18n: file: config/configurepageadvanced.ui:116
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_preferredUnit)
#: rc.cpp:54
msgid "TiB"
msgstr "TiB"

#. i18n: file: config/configurepageadvanced.ui:121
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_preferredUnit)
#: rc.cpp:57
msgid "PiB"
msgstr "PiB"

#. i18n: file: config/configurepageadvanced.ui:126
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_preferredUnit)
#: rc.cpp:60
msgid "EiB"
msgstr "EiB"

#. i18n: file: config/configurepagefilesystemcolors.ui:23
#. i18n: ectx: property (title), widget (QGroupBox, groupBox)
#. i18n: file: config/configurepagegeneral.ui:139
#. i18n: ectx: property (title), widget (QGroupBox, groupBox_4)
#. i18n: file: config/configurepagefilesystemcolors.ui:23
#. i18n: ectx: property (title), widget (QGroupBox, groupBox)
#. i18n: file: config/configurepagegeneral.ui:139
#. i18n: ectx: property (title), widget (QGroupBox, groupBox_4)
#: rc.cpp:63 rc.cpp:174
msgid "File Systems"
msgstr "文件系统"

#. i18n: file: config/configurepagefilesystemcolors.ui:29
#. i18n: ectx: property (text), widget (QLabel, textLabel_20)
#: rc.cpp:66
msgid "luks:"
msgstr "luks："

#. i18n: file: config/configurepagefilesystemcolors.ui:45
#. i18n: ectx: property (text), widget (QLabel, textLabel_9)
#: rc.cpp:69
msgid "ntfs:"
msgstr "ntfs："

#. i18n: file: config/configurepagefilesystemcolors.ui:58
#. i18n: ectx: property (text), widget (QLabel, textLabel)
#: rc.cpp:72
msgid "ext2:"
msgstr "ext2："

#. i18n: file: config/configurepagefilesystemcolors.ui:87
#. i18n: ectx: property (text), widget (QLabel, textLabel_2)
#: rc.cpp:75
msgid "ext3:"
msgstr "ext3："

#. i18n: file: config/configurepagefilesystemcolors.ui:116
#. i18n: ectx: property (text), widget (QLabel, textLabel_3)
#: rc.cpp:78
msgid "ext4:"
msgstr "ext4："

#. i18n: file: config/configurepagefilesystemcolors.ui:132
#. i18n: ectx: property (text), widget (QLabel, textLabel_21)
#: rc.cpp:81
msgid "btrfs:"
msgstr "btrfs："

#. i18n: file: config/configurepagefilesystemcolors.ui:174
#. i18n: ectx: property (text), widget (QLabel, textLabel_4)
#: rc.cpp:84
msgid "linuxswap:"
msgstr "linuxswap："

#. i18n: file: config/configurepagefilesystemcolors.ui:190
#. i18n: ectx: property (text), widget (QLabel, textLabel_6)
#: rc.cpp:87
msgid "fat16:"
msgstr "fat16："

#. i18n: file: config/configurepagefilesystemcolors.ui:219
#. i18n: ectx: property (text), widget (QLabel, textLabel_5)
#: rc.cpp:90
msgid "fat32:"
msgstr "fat32："

#. i18n: file: config/configurepagefilesystemcolors.ui:248
#. i18n: ectx: property (text), widget (QLabel, textLabel_25)
#: rc.cpp:93
msgid "zfs:"
msgstr "zfs："

#. i18n: file: config/configurepagefilesystemcolors.ui:264
#. i18n: ectx: property (text), widget (QLabel, textLabel_7)
#: rc.cpp:96
msgid "reiserfs:"
msgstr "reiserfs："

#. i18n: file: config/configurepagefilesystemcolors.ui:293
#. i18n: ectx: property (text), widget (QLabel, textLabel_8)
#: rc.cpp:99
msgid "reiser4:"
msgstr "reiser4："

#. i18n: file: config/configurepagefilesystemcolors.ui:322
#. i18n: ectx: property (text), widget (QLabel, textLabel_10)
#: rc.cpp:102
msgid "hpfs:"
msgstr "hpfs："

#. i18n: file: config/configurepagefilesystemcolors.ui:338
#. i18n: ectx: property (text), widget (QLabel, textLabel_11)
#: rc.cpp:105
msgid "jfs"
msgstr "jfs"

#. i18n: file: config/configurepagefilesystemcolors.ui:367
#. i18n: ectx: property (text), widget (QLabel, textLabel_12)
#: rc.cpp:108
msgid "hfs:"
msgstr "hfs："

#. i18n: file: config/configurepagefilesystemcolors.ui:396
#. i18n: ectx: property (text), widget (QLabel, textLabel_14)
#: rc.cpp:111
msgid "hfsplus:"
msgstr "hfsplus："

#. i18n: file: config/configurepagefilesystemcolors.ui:412
#. i18n: ectx: property (text), widget (QLabel, textLabel_15)
#: rc.cpp:114
msgid "ufs:"
msgstr "ufs："

#. i18n: file: config/configurepagefilesystemcolors.ui:441
#. i18n: ectx: property (text), widget (QLabel, textLabel_22)
#: rc.cpp:117
msgid "xfs:"
msgstr "xfs："

#. i18n: file: config/configurepagefilesystemcolors.ui:470
#. i18n: ectx: property (text), widget (QLabel, textLabel_24)
#: rc.cpp:120
msgid "ocfs2:"
msgstr "ocfs2："

#. i18n: file: config/configurepagefilesystemcolors.ui:489
#. i18n: ectx: property (text), widget (QLabel, textLabel_13)
#: rc.cpp:123
msgid "extended:"
msgstr "extended："

#. i18n: file: config/configurepagefilesystemcolors.ui:518
#. i18n: ectx: property (text), widget (QLabel, textLabel_17)
#: rc.cpp:126
msgid "unformatted:"
msgstr "未格式化："

#. i18n: file: config/configurepagefilesystemcolors.ui:547
#. i18n: ectx: property (text), widget (QLabel, textLabel_16)
#: rc.cpp:129
msgid "unknown:"
msgstr "未知："

#. i18n: file: config/configurepagefilesystemcolors.ui:570
#. i18n: ectx: property (text), widget (QLabel, textLabel_26)
#: rc.cpp:132
msgid "exfat:"
msgstr ""

#. i18n: file: config/configurepagefilesystemcolors.ui:583
#. i18n: ectx: property (text), widget (QLabel, textLabel_27)
#: rc.cpp:135
#, fuzzy
msgid "nilfs2:"
msgstr "ocfs2："

#. i18n: file: config/configurepagefilesystemcolors.ui:622
#. i18n: ectx: property (text), widget (QLabel, textLabel_28)
#: rc.cpp:138
msgid "lvm2 pv:"
msgstr ""

#. i18n: file: config/configurepagegeneral.ui:23
#. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
#: rc.cpp:141
msgid "Partition Alignment"
msgstr "分区对齐"

#. i18n: file: config/configurepagegeneral.ui:29
#. i18n: ectx: property (text), widget (QCheckBox, kcfg_useCylinderAlignment)
#: rc.cpp:144
msgid "Use cylinder based alignment (Windows XP compatible)"
msgstr "根据柱面对齐(兼容Windows XP)"

#. i18n: file: config/configurepagegeneral.ui:42
#. i18n: ectx: property (text), widget (QLabel, label)
#: rc.cpp:147
msgid "Sector alignment:"
msgstr "扇区对齐："

#. i18n: file: config/configurepagegeneral.ui:55
#. i18n: ectx: property (suffix), widget (QSpinBox, kcfg_sectorAlignment)
#: rc.cpp:150
msgid " sectors"
msgstr " 扇区"

#. i18n: file: config/configurepagegeneral.ui:71
#. i18n: ectx: property (text), widget (QCheckBox, kcfg_alignDefault)
#: rc.cpp:153
msgid "Align partitions per default"
msgstr "按默认设置对齐分区"

#. i18n: file: config/configurepagegeneral.ui:90
#. i18n: ectx: property (title), widget (QGroupBox, groupBox_3)
#: rc.cpp:156
msgid "Logging"
msgstr "日志"

#. i18n: file: config/configurepagegeneral.ui:96
#. i18n: ectx: property (text), widget (QLabel, label_2)
#: rc.cpp:159
msgid "Hide messages below:"
msgstr "隐藏如下文件："

#. i18n: file: config/configurepagegeneral.ui:107
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_minLogLevel)
#: rc.cpp:162
msgid "Debug"
msgstr "调试"

#. i18n: file: config/configurepagegeneral.ui:112
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_minLogLevel)
#: rc.cpp:165
msgid "Information"
msgstr "信息"

#. i18n: file: config/configurepagegeneral.ui:117
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_minLogLevel)
#: rc.cpp:168
msgid "Warning"
msgstr "警告"

#. i18n: file: config/configurepagegeneral.ui:122
#. i18n: ectx: property (text), item, widget (KComboBox, kcfg_minLogLevel)
#: rc.cpp:171
msgid "Error"
msgstr "错误"

#. i18n: file: config/configurepagegeneral.ui:145
#. i18n: ectx: property (text), widget (QLabel, label_3)
#: rc.cpp:177
msgid "Default file system:"
msgstr "默认文件系统："

#. i18n: file: config/configurepagegeneral.ui:167
#. i18n: ectx: property (title), widget (KButtonGroup, kcfg_shredSource)
#: rc.cpp:180
msgid "Shredding"
msgstr "粉碎"

#. i18n: file: config/configurepagegeneral.ui:173
#. i18n: ectx: property (text), widget (QLabel, label_5)
#: rc.cpp:183
msgid "Overwrite with:"
msgstr "覆盖方式："

#. i18n: file: config/configurepagegeneral.ui:180
#. i18n: ectx: property (text), widget (QRadioButton, radioButton)
#: rc.cpp:186
msgid "Random data"
msgstr "随机数据"

#. i18n: file: config/configurepagegeneral.ui:187
#. i18n: ectx: property (text), widget (QRadioButton, radioButton_2)
#: rc.cpp:189
msgid "Zeros"
msgstr "零"

#. i18n: file: gui/smartdialogwidgetbase.ui:23
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartStatus)
#. i18n: file: gui/devicepropswidgetbase.ui:265
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartStatus)
#. i18n: file: gui/smartdialogwidgetbase.ui:23
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartStatus)
#. i18n: file: gui/devicepropswidgetbase.ui:265
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartStatus)
#: rc.cpp:192 rc.cpp:288 gui/smartdialog.cpp:155 gui/smartdialog.cpp:157
msgid "SMART status:"
msgstr "SMART 状态："

#. i18n: file: gui/smartdialogwidgetbase.ui:63
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartModelName)
#: rc.cpp:195 gui/smartdialog.cpp:163
msgid "Model:"
msgstr "模式："

#. i18n: file: gui/smartdialogwidgetbase.ui:92
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartSerialNumber)
#: rc.cpp:198 gui/smartdialog.cpp:164
msgid "Serial number:"
msgstr "序列号："

#. i18n: file: gui/smartdialogwidgetbase.ui:121
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartFirmware)
#: rc.cpp:201 gui/smartdialog.cpp:165
msgid "Firmware revision:"
msgstr "固件版本："

#. i18n: file: gui/smartdialogwidgetbase.ui:150
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartTemperature)
#: rc.cpp:204 gui/smartdialog.cpp:166
msgid "Temperature:"
msgstr "温度："

#. i18n: file: gui/smartdialogwidgetbase.ui:179
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartBadSectors)
#: rc.cpp:207 gui/smartdialog.cpp:167
msgid "Bad sectors:"
msgstr "坏扇区："

#. i18n: file: gui/smartdialogwidgetbase.ui:208
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartPoweredOn)
#: rc.cpp:210 gui/smartdialog.cpp:168
msgid "Powered on for:"
msgstr ""

#. i18n: file: gui/smartdialogwidgetbase.ui:237
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartPowerCycles)
#: rc.cpp:213 gui/smartdialog.cpp:169
msgid "Power cycles:"
msgstr ""

#. i18n: file: gui/smartdialogwidgetbase.ui:289
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:216
msgid "Id"
msgstr "ID"

#. i18n: file: gui/smartdialogwidgetbase.ui:294
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:219
msgid "Attribute"
msgstr "属性"

#. i18n: file: gui/smartdialogwidgetbase.ui:299
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:222
msgid "Failure Type"
msgstr "错误类型"

#. i18n: file: gui/smartdialogwidgetbase.ui:304
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:225
msgid "Update Type"
msgstr "更新类型"

#. i18n: file: gui/smartdialogwidgetbase.ui:309
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:228
msgid "Worst"
msgstr ""

#. i18n: file: gui/smartdialogwidgetbase.ui:314
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:231
msgid "Current"
msgstr "当前"

#. i18n: file: gui/smartdialogwidgetbase.ui:319
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:234
msgid "Threshold"
msgstr "阀值"

#. i18n: file: gui/smartdialogwidgetbase.ui:324
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:237
msgid "Raw"
msgstr ""

#. i18n: file: gui/smartdialogwidgetbase.ui:329
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:240
msgid "Assessment"
msgstr ""

#. i18n: file: gui/smartdialogwidgetbase.ui:334
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeSmartAttributes)
#: rc.cpp:243
msgid "Value"
msgstr "值"

#. i18n: file: gui/smartdialogwidgetbase.ui:385
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartOverallAssessment)
#: rc.cpp:246 gui/smartdialog.cpp:171
msgid "Overall assessment:"
msgstr "整体评估："

#. i18n: file: gui/smartdialogwidgetbase.ui:414
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextSmartSelfTests)
#: rc.cpp:249 gui/smartdialog.cpp:170
msgid "Self tests:"
msgstr "自检测："

#. i18n: file: gui/decryptluksdialogwidgetbase.ui:22
#. i18n: ectx: property (text), widget (QLabel, label_Name)
#: rc.cpp:252
msgid "&Name:"
msgstr ""

#. i18n: file: gui/decryptluksdialogwidgetbase.ui:35
#. i18n: ectx: property (text), widget (QLabel, label_Pass)
#: rc.cpp:255
msgid "&Passphrase:"
msgstr ""

#. i18n: file: gui/devicepropswidgetbase.ui:58
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextType)
#: rc.cpp:258
msgid "Partition table:"
msgstr "分区表："

#. i18n: file: gui/devicepropswidgetbase.ui:77
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioCylinderBased)
#: rc.cpp:261
msgid "Cylinder alignment"
msgstr "柱面对齐"

#. i18n: file: gui/devicepropswidgetbase.ui:84
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioSectorBased)
#: rc.cpp:264
msgid "Sector based alignment"
msgstr "根据扇区对齐"

#. i18n: file: gui/devicepropswidgetbase.ui:113
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextCapacity)
#: rc.cpp:267
msgid "Capacity:"
msgstr "容量："

#. i18n: file: gui/devicepropswidgetbase.ui:130
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextTotalSectors)
#: rc.cpp:270
msgid "Total sectors:"
msgstr "总扇区："

#. i18n: file: gui/devicepropswidgetbase.ui:160
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextCHS)
#: rc.cpp:273
msgid "Cylinders/Heads/Sectors:"
msgstr ""

#. i18n: file: gui/devicepropswidgetbase.ui:183
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextLogicalSectorSize)
#: rc.cpp:276
msgid "Logical sector size:"
msgstr "逻辑扇区大小："

#. i18n: file: gui/devicepropswidgetbase.ui:200
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextPhysicalSectorSize)
#: rc.cpp:279
msgid "Physical sector size:"
msgstr "物理扇区大小："

#. i18n: file: gui/devicepropswidgetbase.ui:217
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextCylinderSize)
#: rc.cpp:282
msgid "Cylinder size:"
msgstr "柱面大小："

#. i18n: file: gui/devicepropswidgetbase.ui:241
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextPrimariesMax)
#: rc.cpp:285
msgid "Primaries/Max:"
msgstr "主分区/最多："

#. i18n: file: gui/devicepropswidgetbase.ui:303
#. i18n: ectx: property (text), widget (KPushButton, m_ButtonSmartMore)
#. i18n: file: gui/editmountpointdialogwidgetbase.ui:142
#. i18n: ectx: property (text), widget (KPushButton, m_ButtonMore)
#. i18n: file: gui/devicepropswidgetbase.ui:303
#. i18n: ectx: property (text), widget (KPushButton, m_ButtonSmartMore)
#. i18n: file: gui/editmountpointdialogwidgetbase.ui:142
#. i18n: ectx: property (text), widget (KPushButton, m_ButtonMore)
#: rc.cpp:291 rc.cpp:553
msgid "More..."
msgstr "更多..."

#. i18n: file: gui/mainwindowbase.ui:14
#. i18n: ectx: property (windowTitle), widget (QMainWindow, MainWindowBase)
#. i18n: file: gui/partitionmanagerwidgetbase.ui:14
#. i18n: ectx: property (windowTitle), widget (QWidget, PartitionManagerWidgetBase)
#. i18n: file: gui/mainwindowbase.ui:14
#. i18n: ectx: property (windowTitle), widget (QMainWindow, MainWindowBase)
#. i18n: file: gui/partitionmanagerwidgetbase.ui:14
#. i18n: ectx: property (windowTitle), widget (QWidget, PartitionManagerWidgetBase)
#: rc.cpp:294 rc.cpp:321
msgctxt "@title:window"
msgid "KDE Partition Manager"
msgstr "KDE 分区管理器"

#. i18n: file: gui/mainwindowbase.ui:24
#. i18n: ectx: property (windowTitle), widget (QDockWidget, m_DockDevices)
#: rc.cpp:297
msgctxt "@title:window"
msgid "Devices"
msgstr "设备"

#. i18n: file: gui/mainwindowbase.ui:38
#. i18n: ectx: property (windowTitle), widget (QDockWidget, m_DockOperations)
#: rc.cpp:300
msgctxt "@title:window"
msgid "Pending Operations"
msgstr "待执行操作"

#. i18n: file: gui/mainwindowbase.ui:49
#. i18n: ectx: property (windowTitle), widget (QDockWidget, m_DockInformation)
#: rc.cpp:303 gui/infopane.cpp:53
msgctxt "@title:window"
msgid "Information"
msgstr "信息"

#. i18n: file: gui/mainwindowbase.ui:63
#. i18n: ectx: property (windowTitle), widget (QDockWidget, m_DockLog)
#: rc.cpp:306
msgctxt "@title:window"
msgid "Log Output"
msgstr "日志输出"

#. i18n: file: gui/treelogbase.ui:54
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeLog)
#: rc.cpp:309
msgctxt ""
"@title:column Severity of a log entry / log level. Text must be very short."
msgid "Sev."
msgstr "严重"

#. i18n: file: gui/treelogbase.ui:57
#. i18n: ectx: property (toolTip), widget (QTreeWidget, m_TreeLog)
#: rc.cpp:312
msgid "Severity"
msgstr "严重性"

#. i18n: file: gui/treelogbase.ui:62
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeLog)
#: rc.cpp:315
msgctxt "@title:column a time stamp of a log entry"
msgid "Time"
msgstr "时间"

#. i18n: file: gui/treelogbase.ui:67
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeLog)
#: rc.cpp:318
msgctxt "@title:column the text message of a log entry"
msgid "Message"
msgstr "消息"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:70
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:324
msgid "Partition"
msgstr "分区"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:75
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:327
msgid "Type"
msgstr "类型"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:80
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:330
msgid "Mount Point"
msgstr "挂载点"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:85
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#. i18n: file: gui/editmountpointdialogwidgetbase.ui:302
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioLabel)
#. i18n: file: gui/partitionmanagerwidgetbase.ui:85
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#. i18n: file: gui/editmountpointdialogwidgetbase.ui:302
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioLabel)
#: rc.cpp:333 rc.cpp:568
msgid "Label"
msgstr "标签"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:90
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#. i18n: file: gui/editmountpointdialogwidgetbase.ui:295
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioUUID)
#. i18n: file: gui/partitionmanagerwidgetbase.ui:90
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#. i18n: file: gui/editmountpointdialogwidgetbase.ui:295
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioUUID)
#: rc.cpp:336 rc.cpp:565
msgid "UUID"
msgstr "UUID"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:95
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:339
msgid "Size"
msgstr "大小"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:100
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:342
msgid "Used"
msgstr "已用"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:105
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:345
msgid "Available"
msgstr "可用"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:110
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:348
msgid "First Sector"
msgstr "首扇区"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:115
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:351
msgid "Last Sector"
msgstr "尾扇区"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:120
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:354
msgid "Number of Sectors"
msgstr "扇区数量"

#. i18n: file: gui/partitionmanagerwidgetbase.ui:125
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreePartitions)
#: rc.cpp:357
msgid "Flags"
msgstr "标记"

#. i18n: file: gui/partpropswidgetbase.ui:49
#. i18n: ectx: property (text), widget (QLabel, m_LabelFileSystem)
#. i18n: file: gui/sizedialogwidgetbase.ui:99
#. i18n: ectx: property (text), widget (QLabel, m_LabelFileSystem)
#. i18n: file: gui/partpropswidgetbase.ui:49
#. i18n: ectx: property (text), widget (QLabel, m_LabelFileSystem)
#. i18n: file: gui/sizedialogwidgetbase.ui:99
#. i18n: ectx: property (text), widget (QLabel, m_LabelFileSystem)
#: rc.cpp:360 rc.cpp:493
msgctxt "@label:listbox"
msgid "File system:"
msgstr "文件系统："

#. i18n: file: gui/partpropswidgetbase.ui:65
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextLabel)
#. i18n: file: gui/sizedialogwidgetbase.ui:115
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextLabel)
#. i18n: file: gui/partpropswidgetbase.ui:65
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextLabel)
#. i18n: file: gui/sizedialogwidgetbase.ui:115
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextLabel)
#: rc.cpp:363 rc.cpp:496
msgctxt "@label"
msgid "Label:"
msgstr "标签："

#. i18n: file: gui/partpropswidgetbase.ui:82
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextNoSetLabel)
#. i18n: file: gui/sizedialogwidgetbase.ui:134
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextNoSetLabel)
#. i18n: file: gui/partpropswidgetbase.ui:82
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextNoSetLabel)
#. i18n: file: gui/sizedialogwidgetbase.ui:134
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextNoSetLabel)
#: rc.cpp:366 rc.cpp:499
msgctxt "@label"
msgid "This file system does not support setting a label."
msgstr "此文件系统不支持设置标签。"

#. i18n: file: gui/partpropswidgetbase.ui:92
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckRecreate)
#: rc.cpp:369
msgctxt "@action:button"
msgid "Recreate existing file system"
msgstr "重新创建已存在的文件系统"

#. i18n: file: gui/partpropswidgetbase.ui:106
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextMountPoint)
#: rc.cpp:372
msgctxt "@label"
msgid "Mount point:"
msgstr "挂载点："

#. i18n: file: gui/partpropswidgetbase.ui:123
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextRole)
#: rc.cpp:375
msgctxt "@label"
msgid "Partition type:"
msgstr "分区类型："

#. i18n: file: gui/partpropswidgetbase.ui:140
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextStatus)
#: rc.cpp:378
msgctxt "@label"
msgid "Status:"
msgstr "状态："

#. i18n: file: gui/partpropswidgetbase.ui:157
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextUuid)
#: rc.cpp:381
msgctxt "@label"
msgid "UUID:"
msgstr "UUID："

#. i18n: file: gui/partpropswidgetbase.ui:187
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextCapacity)
#: rc.cpp:384
msgctxt "@label"
msgid "Size:"
msgstr "大小："

#. i18n: file: gui/partpropswidgetbase.ui:210
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextAvailable)
#: rc.cpp:387
msgctxt "@label partition capacity available"
msgid "Available:"
msgstr "可用："

#. i18n: file: gui/partpropswidgetbase.ui:227
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextUsed)
#: rc.cpp:390
msgctxt "@label partition capacity used"
msgid "Used:"
msgstr "已用："

#. i18n: file: gui/partpropswidgetbase.ui:251
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextFirstSector)
#: rc.cpp:393
msgctxt "@label"
msgid "First sector:"
msgstr "首扇区："

#. i18n: file: gui/partpropswidgetbase.ui:268
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextLastSector)
#: rc.cpp:396
msgctxt "@label"
msgid "Last sector:"
msgstr "尾扇区："

#. i18n: file: gui/partpropswidgetbase.ui:285
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextNumSectors)
#: rc.cpp:399
msgctxt "@label"
msgid "Number of sectors:"
msgstr "扇区数量："

#. i18n: file: gui/partpropswidgetbase.ui:309
#. i18n: ectx: property (text), widget (QLabel, m_LabelTextFlags)
#: rc.cpp:402
msgctxt "@label"
msgid "Flags:"
msgstr "标记："

#. i18n: file: gui/applyprogressdetailswidgetbase.ui:37
#. i18n: ectx: property (text), widget (QPushButton, m_ButtonSave)
#: rc.cpp:405
msgid "Save"
msgstr "保存"

#. i18n: file: gui/applyprogressdetailswidgetbase.ui:44
#. i18n: ectx: property (text), widget (QPushButton, m_ButtonBrowser)
#: rc.cpp:408
msgid "Open in External Browser"
msgstr "在外部浏览器中打开"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:18
#. i18n: ectx: property (text), widget (QLabel, label)
#: rc.cpp:411
msgid ""
"This table shows which file systems are supported and which specific "
"operations can be performed on them.\n"
"Some file systems need external tools to be installed for them to be "
"supported. But not all operations can be performed on all file systems, even "
"if all required tools are installed. Please see the documentation for "
"details. "
msgstr ""
"这张表显示了有哪些文件系统受支持，以及可以对其进行的操作。\n"
"有些文件系统需要安装外部工具来获得对它们的支持。但即便您已经安装了全部所需的"
"工具，也并不是所有操作都能在所有文件系统上进行。请参见文档查看详情。"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:65
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:415
msgid "File System"
msgstr "文件系统"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:70
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:418
msgid "Create"
msgstr "创建"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:75
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:421
msgid "Grow"
msgstr "增大"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:80
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:424
msgid "Shrink"
msgstr "缩小"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:85
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:427
msgid "Move"
msgstr "移动"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:90
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:430
msgid "Copy"
msgstr "复制"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:95
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:433
msgid "Check"
msgstr "检查"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:100
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:436
msgid "Read Label"
msgstr "读取标签"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:105
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:439
msgid "Write Label"
msgstr "写入标签"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:110
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:442
msgid "Read Usage"
msgstr "读取用量"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:115
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:445
msgid "Backup"
msgstr "备份"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:120
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:448
msgid "Restore"
msgstr "还原"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:125
#. i18n: ectx: property (text), widget (QTreeWidget, m_Tree)
#: rc.cpp:451
msgid "Support Tools"
msgstr "支持工具"

#. i18n: file: gui/filesystemsupportdialogwidgetbase.ui:135
#. i18n: ectx: property (text), widget (KPushButton, m_ButtonRescan)
#: rc.cpp:454
msgctxt "@action:button"
msgid "Rescan Support"
msgstr "重新扫描支持"

#. i18n: file: gui/sizedetailswidgetbase.ui:62
#. i18n: ectx: property (text), widget (QLabel, label_6)
#: rc.cpp:457
msgctxt "@label:listbox"
msgid "First sector:"
msgstr "首扇区："

#. i18n: file: gui/sizedetailswidgetbase.ui:97
#. i18n: ectx: property (text), widget (QLabel, label_7)
#: rc.cpp:460
msgctxt "@label:listbox"
msgid "Last sector:"
msgstr "尾扇区："

#. i18n: file: gui/sizedetailswidgetbase.ui:120
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckAlign)
#: rc.cpp:463
msgid "Align partition"
msgstr "对齐分区"

#. i18n: file: gui/createpartitiontablewidgetbase.ui:20
#. i18n: ectx: property (text), widget (QLabel, label)
#: rc.cpp:466
msgid "Choose the type of partition table you want to create:"
msgstr "选择要创建的分区表类型："

#. i18n: file: gui/createpartitiontablewidgetbase.ui:29
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioGPT)
#: rc.cpp:469
msgid "GPT"
msgstr "GPT"

#. i18n: file: gui/createpartitiontablewidgetbase.ui:39
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioMSDOS)
#: rc.cpp:472
msgid "MS-Dos"
msgstr "MS-Dos"

#. i18n: file: gui/createpartitiontablewidgetbase.ui:66
#. i18n: ectx: property (text), widget (QLabel, m_IconLabel)
#: rc.cpp:475
msgid "(icon)"
msgstr "(图标)"

#. i18n: file: gui/createpartitiontablewidgetbase.ui:79
#. i18n: ectx: property (text), widget (QLabel, label_3)
#: rc.cpp:478
msgid "<b>Warning:</b> This will destroy all data on the device!"
msgstr "<b>警告：</b> 这将删除设备上的全部数据！"

#. i18n: file: gui/sizedialogwidgetbase.ui:55
#. i18n: ectx: property (text), widget (QLabel, m_LabelRole)
#: rc.cpp:481
msgctxt "@label:listbox"
msgid "Partition type:"
msgstr "分区类型："

#. i18n: file: gui/sizedialogwidgetbase.ui:70
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioPrimary)
#: rc.cpp:484
msgid "Primary"
msgstr "主分区"

#. i18n: file: gui/sizedialogwidgetbase.ui:77
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioExtended)
#: rc.cpp:487
msgid "Extended"
msgstr "扩展分区"

#. i18n: file: gui/sizedialogwidgetbase.ui:84
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioLogical)
#: rc.cpp:490
msgid "Logical"
msgstr "逻辑分区"

#. i18n: file: gui/sizedialogwidgetbase.ui:152
#. i18n: ectx: property (text), widget (QLabel, label_4)
#: rc.cpp:502
msgctxt "@label"
msgid "Minimum size:"
msgstr "最小大小："

#. i18n: file: gui/sizedialogwidgetbase.ui:175
#. i18n: ectx: property (text), widget (QLabel, label_5)
#: rc.cpp:505
msgctxt "@label"
msgid "Maximum size:"
msgstr "最大大小："

#. i18n: file: gui/sizedialogwidgetbase.ui:198
#. i18n: ectx: property (text), widget (QLabel, label)
#: rc.cpp:508
msgctxt "@label:listbox"
msgid "Free space before:"
msgstr "之前空余空间："

#. i18n: file: gui/sizedialogwidgetbase.ui:233
#. i18n: ectx: property (text), widget (QLabel, label_2)
#: rc.cpp:511
msgctxt "@label:listbox"
msgid "Size:"
msgstr "大小："

#. i18n: file: gui/sizedialogwidgetbase.ui:262
#. i18n: ectx: property (text), widget (QLabel, label_3)
#: rc.cpp:514
msgctxt "@label:listbox"
msgid "Free space after:"
msgstr "之后空余空间："

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:17
#. i18n: ectx: property (text), widget (QLabel, m_LabelPath)
#: rc.cpp:517
msgid "Path:"
msgstr "路径："

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:46
#. i18n: ectx: property (text), widget (KPushButton, m_ButtonSelect)
#: rc.cpp:520
msgid "Select..."
msgstr "选择..."

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:53
#. i18n: ectx: property (text), widget (QLabel, m_LabelType)
#: rc.cpp:523
msgid "Type:"
msgstr "类型："

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:63
#. i18n: ectx: property (text), widget (QLabel, m_LabelOptions)
#: rc.cpp:526
msgid "Options:"
msgstr "操作："

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:73
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckReadOnly)
#: rc.cpp:529
msgid "Read-only"
msgstr "只读"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:80
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckUsers)
#: rc.cpp:532
msgid "Users can mount and unmount"
msgstr "用户可以挂载和卸载"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:87
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckNoAuto)
#: rc.cpp:535
msgid "No automatic mount"
msgstr "不自动挂载"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:94
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckNoAtime)
#: rc.cpp:538
msgid "No update of file access times"
msgstr "不更新文件访问时间"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:101
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckSync)
#: rc.cpp:541
msgid "Synchronous access"
msgstr "同步访问"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:108
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckNoDirAtime)
#: rc.cpp:544
msgid "No update of directory access times"
msgstr "不更新目录访问时间"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:115
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckNoExec)
#: rc.cpp:547
msgid "No binary execution"
msgstr "不可执行"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:122
#. i18n: ectx: property (text), widget (QCheckBox, m_CheckRelAtime)
#: rc.cpp:550
msgid "Update access times relative to modification"
msgstr ""

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:149
#. i18n: ectx: property (text), widget (QLabel, m_LabelDumpFreq)
#: rc.cpp:556
msgid "Dump Frequency:"
msgstr ""

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:178
#. i18n: ectx: property (text), widget (QLabel, m_LabelPassNumber)
#: rc.cpp:559
msgid "Pass Number:"
msgstr ""

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:285
#. i18n: ectx: property (text), widget (QRadioButton, m_RadioDeviceNode)
#: rc.cpp:562
msgid "Device Node"
msgstr "设备节点"

#. i18n: file: gui/editmountpointdialogwidgetbase.ui:309
#. i18n: ectx: property (text), widget (QLabel, label)
#: rc.cpp:571
msgid "Identify by:"
msgstr ""

#. i18n: file: gui/editmountoptionsdialogwidgetbase.ui:14
#. i18n: ectx: property (windowTitle), widget (QWidget, EditMountOptionsDialogWidgetBase)
#: rc.cpp:574
msgid "Edit Mount Options"
msgstr "编辑挂载选项"

#. i18n: file: gui/editmountoptionsdialogwidgetbase.ui:20
#. i18n: ectx: property (text), widget (QLabel, m_Label)
#: rc.cpp:577
msgid "Edit the mount options for this file system:"
msgstr "编辑此文件系统的挂载选项："

#. i18n: file: gui/applyprogressdialogwidgetbase.ui:33
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeTasks)
#: rc.cpp:580
msgid "Operations and Jobs"
msgstr "操作和作业"

#. i18n: file: gui/applyprogressdialogwidgetbase.ui:38
#. i18n: ectx: property (text), widget (QTreeWidget, m_TreeTasks)
#: rc.cpp:583
msgid "Time Elapsed"
msgstr "用时"

#. i18n: file: gui/applyprogressdialogwidgetbase.ui:64
#. i18n: ectx: property (text), widget (QLabel, m_LabelTime)
#: rc.cpp:586
msgid "Total Time: 00:00:00"
msgstr "总共时间：00:00:00"

#. i18n: file: gui/applyprogressdialogwidgetbase.ui:81
#. i18n: ectx: property (format), widget (QProgressBar, m_ProgressSub)
#: rc.cpp:590
#, no-c-format
msgid "Operation: %p%"
msgstr "操作：%p%"

#. i18n: file: gui/applyprogressdialogwidgetbase.ui:91
#. i18n: ectx: property (text), widget (QLabel, m_LabelStatus)
#: rc.cpp:593
msgid "Status"
msgstr "状态"

#. i18n: file: gui/applyprogressdialogwidgetbase.ui:107
#. i18n: ectx: property (format), widget (QProgressBar, m_ProgressTotal)
#: rc.cpp:597
#, no-c-format
msgid "Total: %p%"
msgstr "总共：%p%"

#. i18n: file: config.kcfg:38
#. i18n: ectx: label, entry (firstRun), group (KDE Partition Manager)
#: rc.cpp:600
msgctxt "@label"
msgid "Is this the first time KDE Partition Manager is being run?"
msgstr "是第一次运行 KDE 分区管理器吗？"

#. i18n: file: config.kcfg:42
#. i18n: ectx: label, entry (minLogLevel), group (KDE Partition Manager)
#: rc.cpp:603
msgctxt "@label"
msgid "Hide log messages below"
msgstr "隐藏下面的日志文件"

#. i18n: file: config.kcfg:46
#. i18n: ectx: label, entry (sectorAlignment), group (KDE Partition Manager)
#: rc.cpp:606
msgctxt "@label"
msgid "Partition sector alignment"
msgstr "分区扇区对齐"

#. i18n: file: config.kcfg:50
#. i18n: ectx: label, entry (useCylinderAlignment), group (KDE Partition Manager)
#: rc.cpp:609
msgctxt "@label"
msgid "Use cylinder based alignment (Windows XP compatible)"
msgstr "根据柱面对齐(兼容Windows XP)"

#. i18n: file: config.kcfg:54
#. i18n: ectx: label, entry (alignDefault), group (KDE Partition Manager)
#: rc.cpp:612
msgctxt "@label"
msgid "Align partitions per default"
msgstr "按默认设置对齐分区"

#. i18n: file: config.kcfg:58
#. i18n: ectx: label, entry (allowApplyOperationsAsNonRoot), group (KDE Partition Manager)
#: rc.cpp:615
msgctxt "@label"
msgid "Allow applying operations without administrator privileges"
msgstr "无须管理员权限就可以执行操作"

#. i18n: file: config.kcfg:62
#. i18n: ectx: label, entry, group (KDE Partition Manager)
#: rc.cpp:618
msgctxt "@label"
msgid "File system colors"
msgstr "文件系统颜色"

#. i18n: file: config.kcfg:92
#. i18n: ectx: label, entry, group (KDE Partition Manager)
#: rc.cpp:621
msgctxt "@label"
msgid "Show the application's menu bar"
msgstr "显示应用程序的菜单栏"

#. i18n: file: config.kcfg:96
#. i18n: ectx: label, entry, group (KDE Partition Manager)
#: rc.cpp:624
msgctxt "@label"
msgid "Backend plugin"
msgstr "后端插件"

#. i18n: file: config.kcfg:103
#. i18n: ectx: label, entry, group (KDE Partition Manager)
#: rc.cpp:627
msgctxt "@label"
msgid "Preferred unit:"
msgstr "首选单位："

#: plugins/dummy/dummybackend.cpp:47
msgctxt "@title"
msgid "Dummy Backend Plugin"
msgstr "虚拟后端插件"

#: plugins/dummy/dummybackend.cpp:49
msgid "KDE Partition Manager dummy backend."
msgstr "KDE 分区管理器虚拟后端。"

#: plugins/dummy/dummybackend.cpp:51
msgid "Copyright 2010 Volker Lanz"
msgstr "版权 2010 Volker Lanz"

#: plugins/dummy/dummybackend.cpp:53 plugins/libparted/libpartedbackend.cpp:74
#: util/helpers.cpp:130
msgctxt "@info:credit"
msgid "Volker Lanz"
msgstr "Volker Lanz"

#: plugins/libparted/libparteddevice.cpp:100
msgctxt "@info/plain"
msgid ""
"Creating partition table failed: Could not retrieve partition table type "
"\"%1\" for <filename>%2</filename>."
msgstr "创建分区表失败：无法获取 <filename>%2</filename> 的分区表类型“%1”。"

#: plugins/libparted/libparteddevice.cpp:108
msgctxt "@info/plain"
msgid ""
"Creating partition table failed: Could not open backend device <filename>%1</"
"filename>."
msgstr "创建分区表失败：无法打开后端设备 <filename>%1</filename>。"

#: plugins/libparted/libparteddevice.cpp:116
msgctxt "@info/plain"
msgid ""
"Creating partition table failed: Could not create a new partition table in "
"the backend for device <filename>%1</filename>."
msgstr ""
"创建分区表失败：无法通过后端为设备 <filename>%1</filename> 创建分区表。"

#: plugins/libparted/libpartedbackend.cpp:68
msgctxt "@title"
msgid "LibParted Backend Plugin"
msgstr "LibParted 后端插件"

#: plugins/libparted/libpartedbackend.cpp:70
msgid "KDE Partition Manager backend for libparted."
msgstr "KDE 分区管理器 libparted 后端。"

#: plugins/libparted/libpartedbackend.cpp:72
msgid "Copyright 2008,2009,2010 Volker Lanz"
msgstr "版权 2008，2009，2010 Volker Lanz"

#: plugins/libparted/libpartedbackend.cpp:107
msgctxt "@info/plain"
msgid "LibParted Exception: %1"
msgstr "LibParted 异常：%1"

#: plugins/libparted/libpartedbackend.cpp:422
msgctxt "@info/plain"
msgid "Could not access device <filename>%1</filename>"
msgstr "无法访问备份 <filename>%1</filename>"

#: plugins/libparted/libpartedbackend.cpp:426
msgctxt "@info/plain"
msgid "Device found: %1"
msgstr "找到设备：%1"

#: plugins/libparted/libpartedpartitiontable.cpp:167
msgctxt "@info/plain"
msgid ""
"Unknown partition role for new partition <filename>%1</filename> (roles: %2)"
msgstr ""

#: plugins/libparted/libpartedpartitiontable.cpp:177
msgctxt "@info/plain"
msgid "Failed to create new partition <filename>%1</filename>."
msgstr "创建新分区 <filename>%1</filename> 失败。"

#: plugins/libparted/libpartedpartitiontable.cpp:189
msgctxt "@info/plain"
msgid ""
"Failed to create a new partition: could not get geometry for constraint."
msgstr "创建新分区失败：无法获得物理结构限制。"

#: plugins/libparted/libpartedpartitiontable.cpp:221
msgctxt "@info/plain"
msgid ""
"Deleting partition failed: Partition to delete (<filename>%1</filename>) not "
"found on disk."
msgstr "删除分区失败：在磁盘上未找到要删除的分区(<filename>%1</filename>)。"

#: plugins/libparted/libpartedpartitiontable.cpp:245
msgctxt "@info/plain"
msgid ""
"Could not set geometry for partition <filename>%1</filename> while trying to "
"resize/move it."
msgstr "尝试移动/调整分区 <filename>%1</filename> 大小时无法设定其物理结构。"

#: plugins/libparted/libpartedpartitiontable.cpp:248
msgctxt "@info/plain"
msgid ""
"Could not get constraint for partition <filename>%1</filename> while trying "
"to resize/move it."
msgstr "尝试移动/调整分区 <filename>%1</filename> 大小时无法获得其限制。"

#: plugins/libparted/libpartedpartitiontable.cpp:251
msgctxt "@info/plain"
msgid ""
"Could not get geometry for partition <filename>%1</filename> while trying to "
"resize/move it."
msgstr "尝试移动/调整分区 <filename>%1</filename> 大小时无法获得其物理结构。"

#: plugins/libparted/libpartedpartitiontable.cpp:254
msgctxt "@info/plain"
msgid ""
"Could not open partition <filename>%1</filename> while trying to resize/move "
"it."
msgstr "尝试移动/调整分区 <filename>%1</filename> 大小时无法打开它。"

#: plugins/libparted/libpartedpartitiontable.cpp:273
#, fuzzy
msgctxt "@info/plain"
msgid ""
"Failed to erase filesystem signature on partition <filename>%1</filename>."
msgstr "清除分区 <filename>%1</filename> 上的 reiser4 签名失败。"

#: plugins/libparted/libpartedpartitiontable.cpp:282
msgctxt "@info/plain"
msgid ""
"Could not delete file system on partition <filename>%1</filename>: Failed to "
"get partition."
msgstr "无法删除分区 <filename>%1</filename> 上的文件系统：获得分区失败。"

#: plugins/libparted/libpartedpartitiontable.cpp:310
msgctxt "@info/plain"
msgid "Could not resize file system on partition <filename>%1</filename>."
msgstr "无法调整分区 <filename>%1</filename> 上的文件系统大小。"

#: plugins/libparted/libpartedpartitiontable.cpp:313
msgctxt "@info/plain"
msgid ""
"Could not get geometry for resized partition <filename>%1</filename> while "
"trying to resize the file system."
msgstr ""
"尝试调整文件系统大小时无法获得要调整分区 <filename>%1</filename> 的物理结构。"

#: plugins/libparted/libpartedpartitiontable.cpp:340
msgctxt "@info/plain"
msgid ""
"Could not determine file system of partition at sector %1 on device "
"<filename>%2</filename>."
msgstr "无法决定设备 <filename>%2</filename> 上位于扇区 %1 分区的文件系统。"

#: plugins/libparted/libpartedpartitiontable.cpp:353
msgctxt "@info/plain"
msgid "Could not update the system type for partition <filename>%1</filename>."
msgstr "无法更新分区 <filename>%1</filename> 的系统类型。"

#: plugins/libparted/libpartedpartition.cpp:43
msgctxt "@info/plain"
msgid "The flag \"%1\" is not available on the partition's partition table."
msgstr "标记“%1”在分区的分区表上不可用。"

#: config/configureoptionsdialog.cpp:54
msgctxt "@title:tab general application settings"
msgid "General"
msgstr "一般"

#: config/configureoptionsdialog.cpp:54 config/configureoptionsdialog.cpp:101
msgid "General Settings"
msgstr "一般设置"

#: config/configureoptionsdialog.cpp:59
msgctxt "@title:tab"
msgid "File System Colors"
msgstr "文件系统颜色"

#: config/configureoptionsdialog.cpp:59
msgid "File System Color Settings"
msgstr "文件系统颜色设置"

#: config/configureoptionsdialog.cpp:64
msgctxt "@title:tab advanced application settings"
msgid "Advanced"
msgstr "高级"

#: config/configureoptionsdialog.cpp:64
msgid "Advanced Settings"
msgstr "高级设置"

#: config/configureoptionsdialog.cpp:151
msgctxt "@info"
msgid ""
"<para>Do you really want to change the backend?</para><para><warning>This "
"will also rescan devices and thus clear the list of pending operations.</"
"warning></para>"
msgstr ""
"<para>您确实想要变更后端吗？</para><para> <warning>将重新扫描设备并清空 待执"
"行的操作。</warning></para>"

#: config/configureoptionsdialog.cpp:153
msgctxt "@title:window"
msgid "Really Change Backend?"
msgstr "确实要变更后端吗？"

#: config/configureoptionsdialog.cpp:154
msgctxt "@action:button"
msgid "Change the Backend"
msgstr "变更后端"

#: config/configureoptionsdialog.cpp:155
msgctxt "@action:button"
msgid "Do Not Change the Backend"
msgstr "不变更后端"

#: gui/editmountpointdialogwidget.cpp:181
msgctxt "@info"
msgid "Could not open mount point file <filename>%1</filename>."
msgstr "无法打开挂载点文件 <filename>%1</filename>。"

#: gui/editmountpointdialogwidget.cpp:182
msgctxt "@title:window"
msgid "Error while reading mount points"
msgstr "读取挂载点出错"

#: gui/editmountpointdialogwidget.cpp:301
msgctxt "@info"
msgid "Could not save mount points to file <filename>%1</filename>."
msgstr "无法保存挂载点到文件 <filename>%1</filename>。"

#: gui/editmountpointdialogwidget.cpp:302
msgctxt "@title:window"
msgid "Error While Saving Mount Points"
msgstr "保存挂载点出错"

#: gui/createpartitiontabledialog.cpp:37
msgctxt "@title:window"
msgid "Create a New Partition Table on <filename>%1</filename>"
msgstr "在 <filename>%1</filename> 上创建新分区表"

#: gui/createpartitiontabledialog.cpp:38
msgctxt "@action:button"
msgid "&Create New Partition Table"
msgstr "创建新分区表(&C)"

#: gui/createpartitiontabledialog.cpp:60
msgctxt "@info"
msgid ""
"<para>Do you really want to create an MS-Dos partition table on <filename>"
"%1</filename>?</para><para>This device has more than 2^32 sectors. That is "
"the most the MS-Dos partition table type supports, so you will not be able "
"to use the whole device.</para>"
msgstr ""

#: gui/createpartitiontabledialog.cpp:62
msgctxt "@title:window"
msgid "Really Create MS-Dos Partition Table Type?"
msgstr "确实要创建 MS-Dos 分区表类型吗？"

#: gui/createpartitiontabledialog.cpp:63
msgctxt "@action:button"
msgid "Create MS-Dos Type"
msgstr "创建 MS-Dos 类型"

#: gui/smartdialog.cpp:64
msgctxt "@title:window"
msgid "SMART Properties: <filename>%1</filename>"
msgstr "SMART 属性：<filename>%1</filename>"

#: gui/smartdialog.cpp:66
msgctxt "@action:button"
msgid "Save SMART Report"
msgstr "保存 SMART 报告"

#: gui/smartdialog.cpp:88 gui/smartdialog.cpp:155
#: gui/devicepropsdialog.cpp:118
msgctxt "@label SMART disk status"
msgid "good"
msgstr "良好 "

#: gui/smartdialog.cpp:93 gui/smartdialog.cpp:157
#: gui/devicepropsdialog.cpp:123
msgctxt "@label SMART disk status"
msgid "BAD"
msgstr "坏"

#: gui/smartdialog.cpp:104 gui/smartdialog.cpp:161
msgctxt "@label SMART number of bad sectors"
msgid "none"
msgstr "无"

#: gui/smartdialog.cpp:124 gui/smartdialog.cpp:191
msgctxt "@item:intable"
msgid "Pre-Failure"
msgstr ""

#: gui/smartdialog.cpp:124 gui/smartdialog.cpp:191
msgctxt "@item:intable"
msgid "Old-Age"
msgstr ""

#: gui/smartdialog.cpp:125 gui/smartdialog.cpp:192
msgctxt "@item:intable"
msgid "Online"
msgstr "在线"

#: gui/smartdialog.cpp:125 gui/smartdialog.cpp:192
msgctxt "@item:intable"
msgid "Offline"
msgstr "离线"

#: gui/smartdialog.cpp:138 gui/devicepropsdialog.cpp:129
msgctxt "@label"
msgid "(unknown)"
msgstr "(未知)"

#: gui/smartdialog.cpp:239 gui/mainwindow.cpp:920
#: gui/applyprogressdialog.cpp:412
msgctxt "@info"
msgid ""
"Could not create temporary file when trying to save to <filename>%1</"
"filename>."
msgstr "尝试写入文件 <filename>%1</filename> 时无法创建临时文件。"

#: gui/smartdialog.cpp:239
msgctxt "@title:window"
msgid "Could Not Save SMART Report."
msgstr "无法保存 SMART 报告。"

#: gui/editmountoptionsdialog.cpp:33
msgctxt "@title:window"
msgid "Edit additional mount options"
msgstr "编辑附加挂载选项"

#: gui/infopane.cpp:113
msgctxt "@title:window"
msgid "Partition Information"
msgstr "分区信息"

#: gui/infopane.cpp:120 gui/infopane.cpp:133
msgctxt "@label partition"
msgid "File system:"
msgstr "文件系统："

#: gui/infopane.cpp:121 gui/infopane.cpp:134
msgctxt "@label partition"
msgid "Capacity:"
msgstr "容量："

#: gui/infopane.cpp:122
msgctxt "@label partition"
msgid "Cipher name:"
msgstr ""

#: gui/infopane.cpp:123
msgctxt "@label partition"
msgid "Cipher mode:"
msgstr ""

#: gui/infopane.cpp:124
msgctxt "@label partition"
msgid "Hash:"
msgstr ""

#: gui/infopane.cpp:125
#, fuzzy
msgctxt "@label partition"
msgid "Key size:"
msgstr "扇区大小："

#: gui/infopane.cpp:126
msgctxt "@label partition"
msgid "Payload offset:"
msgstr ""

#: gui/infopane.cpp:127 gui/infopane.cpp:137
msgctxt "@label partition"
msgid "First sector:"
msgstr "首扇区："

#: gui/infopane.cpp:128 gui/infopane.cpp:138
msgctxt "@label partition"
msgid "Last sector:"
msgstr "尾扇区："

#: gui/infopane.cpp:129 gui/infopane.cpp:139
msgctxt "@label partition"
msgid "Number of sectors:"
msgstr "扇区数量："

#: gui/infopane.cpp:135
msgctxt "@label partition"
msgid "Available:"
msgstr "可用："

#: gui/infopane.cpp:136
msgctxt "@label partition"
msgid "Used:"
msgstr "已用："

#: gui/infopane.cpp:150
msgctxt "@title:window"
msgid "Device Information"
msgstr "设备信息"

#: gui/infopane.cpp:154
msgctxt "@label device"
msgid "Path:"
msgstr "路径："

#: gui/infopane.cpp:162 gui/devicepropsdialog.cpp:79
msgctxt "@label device"
msgid "%1 (read only)"
msgstr "%1(只读)"

#: gui/infopane.cpp:167
msgctxt "@label device"
msgid "Type:"
msgstr "类型："

#: gui/infopane.cpp:168
msgctxt "@label device"
msgid "Capacity:"
msgstr "容量："

#: gui/infopane.cpp:169
msgctxt "@label device"
msgid "Total sectors:"
msgstr "总扇区："

#: gui/infopane.cpp:170
msgctxt "@label device"
msgid "Heads:"
msgstr "磁头："

#: gui/infopane.cpp:171
msgctxt "@label device"
msgid "Cylinders:"
msgstr "柱面："

#: gui/infopane.cpp:172
msgctxt "@label device"
msgid "Sectors:"
msgstr "扇区："

#: gui/infopane.cpp:173
msgctxt "@label device"
msgid "Logical sector size:"
msgstr "逻辑扇区大小："

#: gui/infopane.cpp:174
msgctxt "@label device"
msgid "Physical sector size:"
msgstr "物理扇区大小："

#: gui/infopane.cpp:175
msgctxt "@label device"
msgid "Cylinder size:"
msgstr "柱面大小："

#: gui/infopane.cpp:175 gui/devicepropsdialog.cpp:107
msgctxt "@label"
msgid "1 Sector"
msgid_plural "%1 Sectors"
msgstr[0] "%1 个扇区"

#: gui/infopane.cpp:176
msgctxt "@label device"
msgid "Primaries/Max:"
msgstr "主分区/最多："

#: gui/mainwindow.cpp:142
msgctxt "@info"
msgid ""
"<para>Do you really want to quit the application?</para><para>There is still "
"an operation pending.</para>"
msgid_plural ""
"<para>Do you really want to quit the application?</para><para>There are "
"still %1 operations pending.</para>"
msgstr[0] ""
"<para>您确实想要退出应用程序吗？</para><para>还有 %1 个未执行的操作。</para>"

#: gui/mainwindow.cpp:144
msgctxt "@title:window"
msgid "Discard Pending Operations and Quit?"
msgstr "要丢弃待执行操作并退出吗？"

#: gui/mainwindow.cpp:145
msgctxt "@action:button"
msgid "Quit <application>%1</application>"
msgstr "退出 <application>%1</application>"

#: gui/mainwindow.cpp:188
msgctxt "@action:inmenu"
msgid "Undo"
msgstr "撤销"

#: gui/mainwindow.cpp:189
msgctxt "@info:tooltip"
msgid "Undo the last operation"
msgstr "撤销上次操作"

#: gui/mainwindow.cpp:190
msgctxt "@info:status"
msgid "Remove the last operation from the list."
msgstr "从列表中删除上次操作。"

#: gui/mainwindow.cpp:196
msgctxt "@action:inmenu clear the list of operations"
msgid "Clear"
msgstr "清除"

#: gui/mainwindow.cpp:197
msgctxt "@info:tooltip"
msgid "Clear all operations"
msgstr "清除全部操作"

#: gui/mainwindow.cpp:198
msgctxt "@info:status"
msgid "Empty the list of pending operations."
msgstr "清空待执行操作列表。"

#: gui/mainwindow.cpp:203
msgctxt "@action:inmenu apply all operations"
msgid "Apply"
msgstr "执行"

#: gui/mainwindow.cpp:204
msgctxt "@info:tooltip"
msgid "Apply all operations"
msgstr "执行全部操作"

#: gui/mainwindow.cpp:205
msgctxt "@info:status"
msgid "Apply the pending operations in the list."
msgstr "应用列表中的待执行操作。"

#: gui/mainwindow.cpp:210
msgctxt "@action:inmenu refresh list of devices"
msgid "Refresh Devices"
msgstr "刷新设备"

#: gui/mainwindow.cpp:211
msgctxt "@info:tooltip"
msgid "Refresh all devices"
msgstr "刷新全部设备"

#: gui/mainwindow.cpp:212
msgctxt "@info:status"
msgid "Renew the devices list."
msgstr "刷新设备列表。"

#: gui/mainwindow.cpp:218
msgctxt "@action:inmenu"
msgid "New Partition Table"
msgstr "创建新分区表"

#: gui/mainwindow.cpp:219
msgctxt "@info:tooltip"
msgid "Create a new partition table"
msgstr "创建新分区表"

#: gui/mainwindow.cpp:220
msgctxt "@info:status"
msgid "Create a new and empty partition table on a device."
msgstr "在设备上创建新的空分区列表。"

#: gui/mainwindow.cpp:226
msgctxt "@action:inmenu"
msgid "Export Partition Table"
msgstr "导出分区表"

#: gui/mainwindow.cpp:227
msgctxt "@info:tooltip"
msgid "Export a partition table"
msgstr "导出分区表"

#: gui/mainwindow.cpp:228
msgctxt "@info:status"
msgid "Export the device's partition table to a text file."
msgstr "导出设备的分区表到一个文件。"

#: gui/mainwindow.cpp:233
msgctxt "@action:inmenu"
msgid "Import Partition Table"
msgstr "导入分区表"

#: gui/mainwindow.cpp:234
msgctxt "@info:tooltip"
msgid "Import a partition table"
msgstr "导入分区表"

#: gui/mainwindow.cpp:235
msgctxt "@info:status"
msgid "Import a partition table from a text file."
msgstr "从文件导入分区表。"

#: gui/mainwindow.cpp:240
msgctxt "@action:inmenu"
msgid "SMART Status"
msgstr "SMART 状态："

#: gui/mainwindow.cpp:241
msgctxt "@info:tooltip"
msgid "Show SMART status"
msgstr "显示 SMART 状态"

#: gui/mainwindow.cpp:242
msgctxt "@info:status"
msgid "Show the device's SMART status if supported"
msgstr ""

#: gui/mainwindow.cpp:246 gui/mainwindow.cpp:321
msgctxt "@action:inmenu"
msgid "Properties"
msgstr "属性"

#: gui/mainwindow.cpp:247
msgctxt "@info:tooltip"
msgid "Show device properties dialog"
msgstr "显示设备属性对话框"

#: gui/mainwindow.cpp:248
msgctxt "@info:status"
msgid "View and modify device properties"
msgstr "查看及修改设备属性"

#: gui/mainwindow.cpp:254
msgctxt "@action:inmenu create a new partition"
msgid "New"
msgstr "新建"

#: gui/mainwindow.cpp:255
msgctxt "@info:tooltip"
msgid "New partition"
msgstr "新建分区"

#: gui/mainwindow.cpp:256
msgctxt "@info:status"
msgid "Create a new partition."
msgstr "创建新分区。"

#: gui/mainwindow.cpp:262
msgctxt "@action:inmenu"
msgid "Resize/Move"
msgstr "调整大小/移动"

#: gui/mainwindow.cpp:263
msgctxt "@info:tooltip"
msgid "Resize or move partition"
msgstr "调整分区大小或移动分区"

#: gui/mainwindow.cpp:264
msgctxt "@info:status"
msgid "Shrink, grow or move an existing partition."
msgstr "缩小、增大或移动已存在分区。"

#: gui/mainwindow.cpp:270
msgctxt "@action:inmenu"
msgid "Delete"
msgstr "删除"

#: gui/mainwindow.cpp:271
msgctxt "@info:tooltip"
msgid "Delete partition"
msgstr "删除分区"

#: gui/mainwindow.cpp:272
msgctxt "@info:status"
msgid "Delete a partition."
msgstr "删除分区。"

#: gui/mainwindow.cpp:278
msgctxt "@action:inmenu"
msgid "Shred"
msgstr "粉碎"

#: gui/mainwindow.cpp:279
msgctxt "@info:tooltip"
msgid "Shred partition"
msgstr "粉碎分区"

#: gui/mainwindow.cpp:280
msgctxt "@info:status"
msgid "Shred a partition so that its contents cannot be restored."
msgstr "粉碎一个分区，使其中的内容无法被恢复。"

#: gui/mainwindow.cpp:286
msgctxt "@action:inmenu"
msgid "Copy"
msgstr "复制"

#: gui/mainwindow.cpp:287
msgctxt "@info:tooltip"
msgid "Copy partition"
msgstr "复制分区"

#: gui/mainwindow.cpp:288
msgctxt "@info:status"
msgid "Copy an existing partition."
msgstr "复制已存在分区。"

#: gui/mainwindow.cpp:294
msgctxt "@action:inmenu"
msgid "Paste"
msgstr "粘贴"

#: gui/mainwindow.cpp:295
msgctxt "@info:tooltip"
msgid "Paste partition"
msgstr "粘贴分区"

#: gui/mainwindow.cpp:296
msgctxt "@info:status"
msgid "Paste a copied partition."
msgstr "粘贴复制的分区。"

#: gui/mainwindow.cpp:302
msgctxt "@action:inmenu"
msgid "Edit Mount Point"
msgstr "编辑挂载点"

#: gui/mainwindow.cpp:303
msgctxt "@info:tooltip"
msgid "Edit mount point"
msgstr "编辑挂载点"

#: gui/mainwindow.cpp:304
msgctxt "@info:status"
msgid "Edit a partition's mount point and options."
msgstr "编辑一个分区的挂载点和选项。"

#: gui/mainwindow.cpp:308
msgctxt "@action:inmenu"
msgid "Mount"
msgstr "挂载"

#: gui/mainwindow.cpp:309
msgctxt "@info:tooltip"
msgid "Mount or unmount partition"
msgstr "挂载或卸载分区"

#: gui/mainwindow.cpp:310
msgctxt "@info:status"
msgid "Mount or unmount a partition."
msgstr "挂载或卸载分区。"

#: gui/mainwindow.cpp:314
msgctxt "@action:inmenu"
msgid "Check"
msgstr "检查"

#: gui/mainwindow.cpp:315
msgctxt "@info:tooltip"
msgid "Check partition"
msgstr "检查分区"

#: gui/mainwindow.cpp:316
msgctxt "@info:status"
msgid "Check a filesystem on a partition for errors."
msgstr "检查分区上的文件系统是否有错。"

#: gui/mainwindow.cpp:322
msgctxt "@info:tooltip"
msgid "Show partition properties dialog"
msgstr "显示分区属性对话框"

#: gui/mainwindow.cpp:323
msgctxt "@info:status"
msgid "View and modify partition properties (label, partition flags, etc.)"
msgstr "查看和修改分区属性(标签、分区标记等)"

#: gui/mainwindow.cpp:328
msgctxt "@action:inmenu"
msgid "Backup"
msgstr "备份"

#: gui/mainwindow.cpp:329
msgctxt "@info:tooltip"
msgid "Backup partition"
msgstr "备份分区"

#: gui/mainwindow.cpp:330
msgctxt "@info:status"
msgid "Backup a partition to an image file."
msgstr "备份分区到映像文件。"

#: gui/mainwindow.cpp:335
msgctxt "@action:inmenu"
msgid "Restore"
msgstr "还原"

#: gui/mainwindow.cpp:336
msgctxt "@info:tooltip"
msgid "Restore partition"
msgstr "还原分区"

#: gui/mainwindow.cpp:337
msgctxt "@info:status"
msgid "Restore a partition from an image file."
msgstr "从映像文件还原分区。"

#: gui/mainwindow.cpp:342
msgctxt "@action:inmenu"
msgid "File System Support"
msgstr "文件系统支持"

#: gui/mainwindow.cpp:343
msgctxt "@info:tooltip"
msgid "View file system support information"
msgstr "查看文件系统支持信息"

#: gui/mainwindow.cpp:344
msgctxt "@info:status"
msgid "Show information about supported file systems."
msgstr "显示所支持文件系统的信息。"

#: gui/mainwindow.cpp:356
msgctxt "@action:inmenu"
msgid "Clear Log"
msgstr "清除日志"

#: gui/mainwindow.cpp:357
msgctxt "@info:tooltip"
msgid "Clear the log output"
msgstr "清除日志输出"

#: gui/mainwindow.cpp:358
msgctxt "@info:status"
msgid "Clear the log output panel."
msgstr "清除日志输出面板。"

#: gui/mainwindow.cpp:362
msgctxt "@action:inmenu"
msgid "Save Log"
msgstr "保存日志"

#: gui/mainwindow.cpp:363
msgctxt "@info:tooltip"
msgid "Save the log output"
msgstr "保存日志输出"

#: gui/mainwindow.cpp:364
msgctxt "@info:status"
msgid "Save the log output to a file."
msgstr "保存日志到文件。"

#: gui/mainwindow.cpp:448
msgctxt "@info:status"
msgid "One pending operation"
msgid_plural "%1 pending operations"
msgstr[0] "%1 个待执行操作"

#: gui/mainwindow.cpp:547
#, fuzzy
msgctxt "@info/plain"
msgid "Using backend plugin: %1 (%2)"
msgstr "后端插件"

#: gui/mainwindow.cpp:551
msgctxt "@info/plain"
msgid "Scanning devices..."
msgstr "正在扫描设备..."

#: gui/mainwindow.cpp:583
msgctxt "@info/plain"
msgid "Scan finished."
msgstr "扫描完成。"

#: gui/mainwindow.cpp:639
msgctxt "@info"
msgid ""
"<para>Do you really want to rescan the devices?</para><para><warning>This "
"will also clear the list of pending operations.</warning></para>"
msgstr ""
"<para>您确实想要重新扫描设备吗？</para><para><warning>这将同时清除未 执行的操"
"作列表。</warning></para>"

#: gui/mainwindow.cpp:641
msgctxt "@title:window"
msgid "Really Rescan the Devices?"
msgstr "确实要重新扫描设备吗？"

#: gui/mainwindow.cpp:642
msgctxt "@action:button"
msgid "Rescan Devices"
msgstr "重新扫描设备"

#: gui/mainwindow.cpp:658
msgctxt "@info"
msgid ""
"<para>Do you really want to apply the pending operations listed below?</"
"para><para><warning>This will permanently modify your disks.</warning></para>"
msgstr ""
"<para>您真的想要执行以下待执行操作吗？</para><para><warning>这将永久修改您的"
"磁盘。</warning></para>"

#: gui/mainwindow.cpp:660
msgctxt "@title:window"
msgid "Apply Pending Operations?"
msgstr "要应用待执行的操作吗？"

#: gui/mainwindow.cpp:661
msgctxt "@action:button"
msgid "Apply Pending Operations"
msgstr "应用待执行操作"

#: gui/mainwindow.cpp:664
msgctxt "@info/plain"
msgid "Applying operations..."
msgstr "正在执行操作..."

#: gui/mainwindow.cpp:690
msgctxt "@info/plain"
msgid "Undoing operation: %1"
msgstr "撤销操作：%1"

#: gui/mainwindow.cpp:706
msgctxt "@info"
msgid "Do you really want to clear the list of pending operations?"
msgstr "您真的要清除待执行操作列表吗？"

#: gui/mainwindow.cpp:707
msgctxt "@title:window"
msgid "Clear Pending Operations?"
msgstr "要清除待执行操作吗？"

#: gui/mainwindow.cpp:708
msgctxt "@action:button"
msgid "Clear Pending Operations"
msgstr "清除待执行的操作"

#: gui/mainwindow.cpp:711
msgctxt "@info/plain"
msgid "Clearing the list of pending operations."
msgstr "清除待执行操作的列表。"

#: gui/mainwindow.cpp:749
msgctxt "@info"
msgid "Could not open input file <filename>%1</filename> for import: %2"
msgstr "无法打开输入文件 <filename>%1</filename> 以导入：%2"

#: gui/mainwindow.cpp:749 gui/mainwindow.cpp:757
msgctxt "@title:window"
msgid "Error Importing Partition Table"
msgstr "导入分区表错误"

#: gui/mainwindow.cpp:757
msgctxt "@info"
msgid ""
"Could not open temporary file <filename>%1</filename> while trying to import "
"from <filename>%2</filename>."
msgstr ""
"尝试从 <filename>%2</filename> 导入时无法打开临时文件  <filename>%1</"
"filename>。"

#: gui/mainwindow.cpp:783
msgctxt "@info"
msgid ""
"The import file <filename>%1</filename> does not contain a valid partition "
"table."
msgstr "导入的文件 <filename>%1</filename> 中未包含正确的分区表。"

#: gui/mainwindow.cpp:783 gui/mainwindow.cpp:796 gui/mainwindow.cpp:804
#: gui/mainwindow.cpp:810 gui/mainwindow.cpp:825 gui/mainwindow.cpp:839
#: gui/mainwindow.cpp:845 gui/mainwindow.cpp:867 gui/mainwindow.cpp:873
#: gui/mainwindow.cpp:879 gui/mainwindow.cpp:887
msgctxt "@title:window"
msgid "Error While Importing Partition Table"
msgstr "导入分区表时发生错误"

#: gui/mainwindow.cpp:796
msgctxt "@info"
msgid "Found more than one partition table type in import file (line %1)."
msgstr ""

#: gui/mainwindow.cpp:804
msgctxt "@info"
msgid "Partition table type \"%1\" is unknown (line %2)."
msgstr ""

#: gui/mainwindow.cpp:810
msgctxt "@info"
msgid "Partition table type \"%1\" is not supported for import (line %2)."
msgstr ""

#: gui/mainwindow.cpp:825
msgctxt "@info"
msgid "Found partition but no partition table type (line %1)."
msgstr ""

#: gui/mainwindow.cpp:839
msgctxt "@info the partition is NOT a device path, just a number"
msgid "Partition %1 would be outside the device's boundaries (line %2)."
msgstr ""

#: gui/mainwindow.cpp:845
msgctxt "@info"
msgid "Partition %1 has end before start sector (line %2)."
msgstr ""

#: gui/mainwindow.cpp:867
#, fuzzy
msgctxt "@info the partition is NOT a device path, just a number"
msgid "Unrecognized partition role \"%1\" for partition %2 (line %3)."
msgstr "无法调整分区 <filename>%1</filename> 上的文件系统大小。"

#: gui/mainwindow.cpp:873
msgctxt "@info the partition is NOT a device path, just a number"
msgid ""
"No parent partition or partition table found for partition %1 (line %2)."
msgstr ""

#: gui/mainwindow.cpp:879
msgctxt "@info"
msgid ""
"The partition table type \"%1\" does not support extended partitions, but "
"one was found (line %2)."
msgstr ""

#: gui/mainwindow.cpp:887
#, fuzzy
msgctxt "@info the partition is NOT a device path, just a number"
msgid "Could not create file system \"%1\" for partition %2 (line %3)."
msgstr "无法调整分区 <filename>%1</filename> 上的文件系统大小。"

#: gui/mainwindow.cpp:899
msgctxt "@info/plain"
msgid "Could not parse line %1 from import file. Ignoring it."
msgstr ""

#: gui/mainwindow.cpp:920
msgctxt "@title:window"
msgid "Error Exporting Partition Table"
msgstr "导出分区表错误"

#: gui/mainwindow.cpp:1062
msgctxt "@info"
msgid ""
"<para>No support tools were found for file systems currently present on hard "
"disks in this computer:</para><table style='margin-top:12px'><tr><td "
"style='font-weight:bold;padding-right:12px;white-space:nowrap;'>Partition</"
"td><td style='font-weight:bold;padding-right:12px;white-space:nowrap;'>File "
"System</td><td style='font-weight:bold;padding-right:12px;white-space:"
"nowrap;'>Support Tools</td><td style='font-weight:bold;padding-right:12px;"
"white-space:nowrap;'>URL</td></tr>%1</table><para>As long as the support "
"tools for these file systems are not installed you will not be able to "
"modify them.</para><para>You should find packages with these support tools "
"in your distribution's package manager.</para>"
msgstr ""

#: gui/mainwindow.cpp:1075
msgctxt "@title:window"
msgid "Missing File System Support Packages"
msgstr "缺少文件系统支持包"

#: gui/filesystemsupportdialog.cpp:39
msgctxt "@title:window"
msgid "File System Support"
msgstr "文件系统支持"

#: gui/scanprogressdialog.cpp:27
msgctxt "@title:window"
msgid "Scanning devices..."
msgstr "正在扫描设备..."

#: gui/scanprogressdialog.cpp:36
msgctxt "@label"
msgid "Scanning..."
msgstr "扫描设备..."

#: gui/scanprogressdialog.cpp:38
msgctxt "@label"
msgid "Scanning device: <filename>%1</filename>"
msgstr "正在扫描设备：<filename>%1</filename>"

#: gui/devicepropsdialog.cpp:52
msgctxt "@title:window"
msgid "Device Properties: <filename>%1</filename>"
msgstr "设备属性：<filename>%1</filename>"

#: gui/partpropsdialog.cpp:54
msgctxt "@title:window"
msgid "Partition properties: <filename>%1</filename>"
msgstr "分区属性：<filename>%1</filename>"

#: gui/partpropsdialog.cpp:102
msgctxt "@item mountpoint"
msgid "(none found)"
msgstr "(未找到)"

#: gui/partpropsdialog.cpp:108
msgctxt "@label partition state"
msgid "idle"
msgstr "空闲"

#: gui/partpropsdialog.cpp:112
msgctxt "@label partition state"
msgid "At least one logical partition is mounted."
msgstr "至少要挂载一个逻辑分区。"

#: gui/partpropsdialog.cpp:114
msgctxt "@label partition state"
msgid "mounted on <filename>%1</filename>"
msgstr "挂载于 <filename>%1</filename>"

#: gui/partpropsdialog.cpp:116
msgctxt "@label partition state"
msgid "mounted"
msgstr "已挂载"

#: gui/partpropsdialog.cpp:120
msgctxt "@item uuid"
msgid "(none)"
msgstr "(无)"

#: gui/partpropsdialog.cpp:327
msgctxt "@info"
msgid ""
"<para><warning>You are about to lose all data on partition <filename>%1</"
"filename>.</warning></para><para>Changing the file system on a partition "
"already on disk will erase all its contents. If you continue now and apply "
"the resulting operation in the main window, all data on <filename>%1</"
"filename> will unrecoverably be lost.</para>"
msgstr ""
"<para><warning>您即将丢失分区 <filename>%1</filename> 上的全部数据。</"
"warning></para><para>更改磁盘上已有分区的文件系统将清除其内容。如果您现在继续"
"并执行主窗口中的操作，<filename>%1</filename> 上的全部数据将永远丢失。</para>"

#: gui/partpropsdialog.cpp:329
msgctxt "@title:window"
msgid "Really Recreate <filename>%1</filename> with File System %2?"
msgstr "真的要以 %2 文件系统重新创建 <filename>%1</filename> 吗？"

#: gui/partpropsdialog.cpp:330
msgctxt "@action:button"
msgid "Change the File System"
msgstr "更改文件系统"

#: gui/partpropsdialog.cpp:331
msgctxt "@action:button"
msgid "Do Not Change the File System"
msgstr "不更改文件系统"

#: gui/partpropsdialog.cpp:352
msgctxt "@info"
msgid ""
"<para><warning>You are about to lose all data on partition <filename>%1</"
"filename>.</warning></para><para>Recreating a file system will erase all its "
"contents. If you continue now and apply the resulting operation in the main "
"window, all data on <filename>%1</filename> will unrecoverably be lost.</"
"para>"
msgstr ""
"<para><warning>您即将丢失分区 <filename>%1</filename> 上的全部数据。</"
"warning></para><para>重新创建文件系统将清除其内容。如果您现在继续并执行主窗口"
"中的操作，<filename>%1</filename> 上的全部数据将永远丢失。</para>"

#: gui/partpropsdialog.cpp:354
msgctxt "@title:window"
msgid "Really Recreate File System on <filename>%1</filename>?"
msgstr "真的要重新创建 <filename>%1</filename> 上的文件系统吗？"

#: gui/partpropsdialog.cpp:355
msgctxt "@action:button"
msgid "Recreate the File System"
msgstr "重新创建文件系统"

#: gui/partpropsdialog.cpp:356
msgctxt "@action:button"
msgid "Do Not Recreate the File System"
msgstr "不重新创建文件系统"

#: gui/applyprogressdialog.cpp:119
msgctxt "@info:progress"
msgid "Setting up..."
msgstr "正在建立..."

#: gui/applyprogressdialog.cpp:177
msgctxt "@info:progress"
msgid "Waiting for operation to finish..."
msgstr "正在等待操作结束..."

#: gui/applyprogressdialog.cpp:188
msgctxt "@info"
msgid "Do you really want to cancel?"
msgstr "您真的想要取消吗？"

#: gui/applyprogressdialog.cpp:188
msgctxt "@title:window"
msgid "Cancel Running Operations"
msgstr "取消正在执行的操作"

#: gui/applyprogressdialog.cpp:188
msgctxt "@action:button"
msgid "Yes, Cancel Operations"
msgstr "是的，取消操作"

#: gui/applyprogressdialog.cpp:205
msgctxt "@info:progress"
msgid "All operations successfully finished."
msgstr "全部操作成功完成。"

#: gui/applyprogressdialog.cpp:210
msgctxt "@info:progress"
msgid "Operations cancelled."
msgstr "操作已取消。"

#: gui/applyprogressdialog.cpp:215
msgctxt "@info:progress"
msgid "There were errors while applying operations. Aborted."
msgstr "执行操作时发生错误。已中止。"

#: gui/applyprogressdialog.cpp:326
msgctxt "@info:progress"
msgid "[%1/%2] - %3: %4"
msgstr "[%1/%2] - %3：%4"

#: gui/applyprogressdialog.cpp:362
msgctxt "@info:progress"
msgid "Total Time: %1"
msgstr "总时间：%1"

#: gui/applyprogressdialog.cpp:412
msgctxt "@title:window"
msgid "Could Not Save Report."
msgstr "无法保存报告。"

#: gui/applyprogressdialog.cpp:438
msgctxt "@info"
msgid ""
"The configured external browser could not be run. Please check your settings."
msgstr "所配置的外部浏览器无法运行。请检查您的设置。"

#: gui/applyprogressdialog.cpp:438 gui/applyprogressdialog.cpp:441
msgctxt "@title:window"
msgid "Could Not Launch Browser."
msgstr "无法启动浏览器。"

#: gui/applyprogressdialog.cpp:441
msgctxt "@info"
msgid "Could not create temporary file <filename>%1</filename> for writing."
msgstr "无法创建临时文件 <filename>%1</filename> 以写入。"

#: gui/parttablewidget.cpp:36
msgctxt "@info"
msgid "Please select a device."
msgstr "请选择设备。"

#: gui/parttablewidget.cpp:63
msgctxt "@info"
msgid "No valid partition table was found on this device."
msgstr "在此设备上未找到有效的分区表。"

#: gui/sizedialogbase.cpp:57
msgctxt "@item:button advanced settings button"
msgid "Advanced"
msgstr "高级"

#: gui/newdialog.cpp:47
msgctxt "@title:window"
msgid "Create a new partition"
msgstr "创建新分区"

#: gui/resizedialog.cpp:48
msgctxt "@title:window"
msgid "Resize/move partition: <filename>%1</filename>"
msgstr "调整大小/移动分区：<filename>%1</filename>"

#: gui/editmountpointdialog.cpp:36
msgctxt "@title:window"
msgid "Edit mount point for <filename>%1</filename>"
msgstr "编辑 <filename>%1</filename> 的挂载点"

#: gui/editmountpointdialog.cpp:51
msgctxt "@info"
msgid ""
"<para>Are you sure you want to save the changes you made to the system table "
"file <filename>/etc/fstab</filename>?</para><para><warning>This will "
"overwrite the existing file on your hard drive now. This <strong>can not be "
"undone</strong>.</warning></para>"
msgstr ""
"<para>确定保存对 <filename>/etc/fstab</filename> 的修改吗?</para> "
"<para><warning>这将覆盖您硬盘上的已有文件。 <strong>无法撤销</strong>。</"
"warning></para>"

#: gui/editmountpointdialog.cpp:53
msgctxt "@title:window"
msgid "Really save changes?"
msgstr "确实要保存更改吗？"

#: gui/editmountpointdialog.cpp:54
msgctxt "@action:button"
msgid "Save changes"
msgstr "保存更改"

#: gui/partitionmanagerwidget.cpp:406
msgctxt "@info"
msgid ""
"The file system on partition <filename>%1</filename> could not be mounted."
msgstr "无法挂载分区 <filename>%1</filename> 上的文件系统。"

#: gui/partitionmanagerwidget.cpp:406
msgctxt "@title:window"
msgid "Could Not Mount File System."
msgstr "无法挂载文件系统。"

#: gui/partitionmanagerwidget.cpp:411
msgctxt "@info"
msgid ""
"The file system on partition <filename>%1</filename> could not be unmounted."
msgstr "无法卸载分区 <filename>%1</filename> 上的文件系统。"

#: gui/partitionmanagerwidget.cpp:411
msgctxt "@title:window"
msgid "Could Not Unmount File System."
msgstr "无法卸载文件系统。"

#: gui/partitionmanagerwidget.cpp:453
msgctxt "@info"
msgid ""
"<para>There is already one primary partition on this device. This is the "
"maximum number its partition table type can handle.</para><para>You cannot "
"create, paste or restore a primary partition on it before you delete an "
"existing one.</para>"
msgid_plural ""
"<para>There are already %1 primary partitions on this device. This is the "
"maximum number its partition table type can handle.</para><para>You cannot "
"create, paste or restore a primary partition on it before you delete an "
"existing one.</para>"
msgstr[0] ""
"<para>在此设备上已经有 %1 个主分区。这是其分区表能处理的最大数量。</"
"para><para>在您删除一个已有主分区之前，您不能在上面创建、粘贴或还原主分区。</"
"para>"

#: gui/partitionmanagerwidget.cpp:457
msgctxt "@title:window"
msgid "Too Many Primary Partitions."
msgstr "主分区太多。"

#: gui/partitionmanagerwidget.cpp:522
msgctxt "@info"
msgid ""
"<para>The partition <filename>%1</filename> cannot currently be deleted "
"because one or more partitions with higher logical numbers are still mounted."
"</para><para>Please unmount all partitions with higher logical numbers than "
"%2 first.</para>"
msgstr ""
"<para>目前无法删除分区 <filename>%1</filename>，因为有一个或更多带有更高逻辑"
"数字的分区仍然处于挂载状态。</para><para>请先卸载全部带有超过 %2 逻辑数字的分"
"区。</para>"

#: gui/partitionmanagerwidget.cpp:525
msgctxt "@title:window"
msgid "Cannot Delete Partition."
msgstr "无法删除分区。"

#: gui/partitionmanagerwidget.cpp:535
msgctxt "@info"
msgid ""
"Do you really want to delete the partition that is currently in the "
"clipboard? It will no longer be available for pasting after it has been "
"deleted."
msgstr "您真的想要删除当前在剪贴板中的分区吗？如果删除的话，它就不能再粘贴了。"

#: gui/partitionmanagerwidget.cpp:537
msgctxt "@title:window"
msgid "Really Delete Partition in the Clipboard?"
msgstr "真的删除剪贴板中的分区吗？"

#: gui/partitionmanagerwidget.cpp:538
msgctxt "@action:button"
msgid "Delete It"
msgstr "删除它"

#: gui/partitionmanagerwidget.cpp:584
msgctxt "@info/plain"
msgid ""
"Partition <filename>%1</filename> has the same position and size after "
"resize/move. Ignoring operation."
msgstr ""
"分区 <filename>%1</filename> 在调整大小/移动之后具有相同位置。忽略操作。"

#: gui/partitionmanagerwidget.cpp:614
msgctxt "@info/plain"
msgid "Partition <filename>%1</filename> has been copied to the clipboard."
msgstr "分区 <filename>%1</filename> 已被复制到剪贴板。"

#: gui/partitionmanagerwidget.cpp:683
#, fuzzy
msgctxt "@info"
msgid ""
"<para><warning>You are about to lose all data on partition <filename>%1</"
"filename>.</warning></para><para>Overwriting one partition with another (or "
"with an image file) will destroy all data on this target partition.</"
"para><para>If you continue now and apply the resulting operation in the main "
"window, all data currently stored on <filename>%1</filename> will "
"unrecoverably be overwritten.</para>"
msgstr ""
"<para><warning>您即将丢失分区 <filename>%1</filename> 上的全部数据。</"
"warning></para><para>重新创建文件系统将清除其内容。如果您现在继续并应用主窗口"
"中结果的操作，<filename>%1</filename> 上的全部数据将永远丢失。</para>"

#: gui/partitionmanagerwidget.cpp:691
msgctxt "@title:window"
msgid "Really Overwrite Existing Partition?"
msgstr "确定覆盖已有分区吗？"

#: gui/partitionmanagerwidget.cpp:692
msgctxt "@action:button"
msgid "Overwrite Partition"
msgstr "覆盖分区"

#: gui/partitionmanagerwidget.cpp:701
msgctxt "@info"
msgid ""
"<para>The selected partition is not large enough to hold the source "
"partition or the backup file.</para><para>Pick another target or resize this "
"partition so it is as large as the source.</para>"
msgstr ""
"<para>选择的分区过小，无法保存源分区或备份文件</para> <para>请选择其它分区或"
"增大分区到源分区大小。</para>"

#: gui/partitionmanagerwidget.cpp:702
msgctxt "@title:window"
msgid "Target Not Large Enough"
msgstr "目标不够大"

#: gui/partitionmanagerwidget.cpp:705
msgctxt "@info"
msgid ""
"<para>It is not possible to create the target partition large enough to hold "
"the source.</para><para>This may happen if not all partitions on a device "
"are correctly aligned or when copying a primary partition into an extended "
"partition.</para>"
msgstr ""

#: gui/partitionmanagerwidget.cpp:708
msgctxt "@title:window"
msgid "Cannot Create Target Partition."
msgstr "无法创建目标分区。"

#: gui/partitionmanagerwidget.cpp:746
msgctxt "@info"
msgid "Do you want to overwrite the existing file <filename>%1</filename>?"
msgstr "您想要覆盖已存在的文件 <filename>%1</filename> 吗？"

#: gui/partitionmanagerwidget.cpp:746
msgctxt "@title:window"
msgid "Overwrite Existing File?"
msgstr "覆盖已有文件吗？"

#: gui/partitionmanagerwidget.cpp:746
msgctxt "@action:button"
msgid "Overwrite File"
msgstr "覆盖文件"

#: gui/partitionmanagerwidget.cpp:773
msgctxt "@info"
msgid ""
"The file system in the image file <filename>%1</filename> is too large to be "
"restored to the selected partition."
msgstr ""
"映像文件 <filename>%1</filename> 中的文件系统太大了，无法恢复到所选分区。"

#: gui/partitionmanagerwidget.cpp:773
msgctxt "@title:window"
msgid "Not Enough Space to Restore File System."
msgstr "没有足够的空间来还原文件系统。"

#: gui/treelog.cpp:131
msgctxt "@info"
msgid "Could not create temporary output file to save <filename>%1</filename>."
msgstr "无法创建临时输出文件以保存 <filename>%1</filename>。"

#: gui/treelog.cpp:131
msgctxt "@title:window"
msgid "Error Saving Log File"
msgstr "保存日志文件时出错"

#: gui/decryptluksdialog.cpp:37
#, fuzzy
msgctxt "@title:window"
msgid "Decrypt LUKS partition on <filename>%1</filename>"
msgstr "删除分区 <filename>%1</filename>"

#: gui/decryptluksdialog.cpp:38
msgctxt "@action:button"
msgid "&Decrypt"
msgstr ""

#: gui/insertdialog.cpp:43
msgctxt "@title:window"
msgid "Insert a partition"
msgstr "插入分区"

#: util/externalcommand.cpp:126
#, fuzzy
msgctxt "@info/plain"
msgid "Command: %1"
msgstr "命令：%1 %2"

#: util/externalcommand.cpp:134
#, fuzzy
msgctxt "@info/plain"
msgid "(Command timeout while starting \"%1\")"
msgstr "(启动时命令超时)"

#: util/externalcommand.cpp:156
#, fuzzy
msgctxt "@info/plain"
msgid "(Command timeout while running \"%1\")"
msgstr "(运行时命令超时)"

#: util/helpers.cpp:104
msgctxt "@info"
msgid ""
"<para><warning>You do not have administrative privileges.</warning></"
"para><para>It is possible to run <application>%1</application> without these "
"privileges. You will, however, <emphasis>not</emphasis> be allowed to apply "
"operations.</para><para>Do you want to continue running <application>%1</"
"application>?</para>"
msgstr ""
"<para><warning>您没有管理员权限。</warning></para><para>没有这些权限也能运行 "
"<application>%1</application>。然而，您将<emphasis>无法</emphasis>执行操作。"
"</para><para>您想要继续运行 <application>%1</application> 吗？</para>"

#: util/helpers.cpp:109
msgctxt "@title:window"
msgid "No administrative privileges"
msgstr "无管理员权限"

#: util/helpers.cpp:110
msgctxt "@action:button"
msgid "Run without administrative privileges"
msgstr "以无管理员权限运行"

#: util/helpers.cpp:123
msgctxt "@title"
msgid "<application>KDE Partition Manager</application>"
msgstr "<application>KDE 分区管理器</application>"

#: util/helpers.cpp:125
msgctxt "@title"
msgid "Manage your disks, partitions and file systems"
msgstr "管理您的磁盘、分区和文件系统"

#: util/helpers.cpp:127
#, fuzzy
msgctxt "@info:credit"
msgid "© 2008-2013 Volker Lanz"
msgstr "版权 2008，2009，2010 Volker Lanz"

#: util/helpers.cpp:130
msgctxt "@info:credit"
msgid "Former maintainer"
msgstr ""

#: util/helpers.cpp:133
msgid "Hugo Pereira Da Costa"
msgstr "Hugo Pereira Da Costa"

#: util/helpers.cpp:133
msgctxt "@info:credit"
msgid "Partition Widget Design"
msgstr "分区部件设计"

#: util/helpers.cpp:134
msgid "Andrius Štikonas"
msgstr ""

#: util/helpers.cpp:134
msgctxt "@info:credit"
msgid "Btrfs support"
msgstr ""

#: util/helpers.cpp:165
msgctxt "@title:menu"
msgid "Columns"
msgstr "列"

#: util/helpers.cpp:199
msgctxt "@info"
msgid ""
"<para>The configured backend plugin \"%1\" could not be loaded.</"
"para><para>Loading the default backend plugin \"%2\" instead.</para>"
msgstr ""
"<para>无法装入配置的后端插件“%1”。</para><para>装入默认后端插件“%2”作为替代。"
"</para>"

#: util/helpers.cpp:202 util/helpers.cpp:211
msgctxt "@title:window"
msgid "Error: Could Not Load Backend Plugin"
msgstr "错误：无法装入后端插件"

#: util/helpers.cpp:208
msgctxt "@info"
msgid ""
"<para>Neither the configured (\"%1\") nor the default (\"%2\") backend "
"plugin could be loaded.</para><para>Please check your installation.</para>"
msgstr ""
"<para>无法装入配置的(“%1”)和默认(“%2”)的后端插件。</para><para>请检查您的安"
"装。</para>"

#: util/helpers.cpp:224
msgctxt "@info"
msgid ""
"<para>No usable devices could be found.</para><para>Make sure you have "
"sufficient privileges to access block devices on your system.</para>"
msgstr ""
"<para>未找到可用的设备。</para><para>确认您具有足够的访问您系统块设备的权限。"
"</para>"

#: util/helpers.cpp:226
msgctxt "@title:window"
msgid "Error: No Usable Devices Found"
msgstr "错误：未找到可用设备"

#: util/capacity.cpp:117
msgctxt "@info/plain unit"
msgid "Byte"
msgid_plural "Bytes"
msgstr[0] "字节"

#: util/capacity.cpp:118
msgctxt "@info/plain unit"
msgid "KiB"
msgstr "KiB"

#: util/capacity.cpp:119
msgctxt "@info/plain unit"
msgid "MiB"
msgstr "MiB"

#: util/capacity.cpp:120
msgctxt "@info/plain unit"
msgid "GiB"
msgstr "GiB"

#: util/capacity.cpp:121
msgctxt "@info/plain unit"
msgid "TiB"
msgstr "TiB"

#: util/capacity.cpp:122
msgctxt "@info/plain unit"
msgid "PiB"
msgstr "PiB"

#: util/capacity.cpp:123
msgctxt "@info/plain unit"
msgid "EiB"
msgstr "EiB"

#: util/capacity.cpp:124
msgctxt "@info/plain unit"
msgid "ZiB"
msgstr "ZiB"

#: util/capacity.cpp:125
msgctxt "@info/plain unit"
msgid "YiB"
msgstr "YiB"

#: util/capacity.cpp:129
msgctxt "@info/plain unit"
msgid "(unknown unit)"
msgstr "(未知单位)"

#: util/htmlreport.cpp:65 util/htmlreport.cpp:72
msgid "%1: SMART Status Report"
msgstr "%1: SMART 状态报告"

#: util/htmlreport.cpp:80
msgid "Date:"
msgstr "日期："

#: util/htmlreport.cpp:81
msgid "Program version:"
msgstr "程序版本："

#: util/htmlreport.cpp:82
msgid "Backend:"
msgstr "后端："

#: util/htmlreport.cpp:83
msgid "KDE version:"
msgstr "KDE 版本："

#: util/htmlreport.cpp:84
msgid "Machine:"
msgstr "机器："