# translation of kcmsmartcard.po to Chinese Traditional
# Traditional Chinese Translation of kcmsmartcard
# Copyright (C) 2002, 2007 Free Software Foundation, Inc.
#
# Paladin Liu <paladin@ms1.hinet.net>, 2002.
# Franklin Weng <franklin at goodhorse dot idv dot tw>, 2007.
# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2009.
msgid ""
msgstr ""
"Project-Id-Version: kcmsmartcard\n"
"Report-Msgid-Bugs-To: xakepa10@gmail.com\n"
"POT-Creation-Date: 2014-12-09 18:22+0000\n"
"PO-Revision-Date: 2009-11-22 14:47+0800\n"
"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Lokalize 1.0\n"

#. i18n: file: nosmartcardbase.ui:24
#. i18n: ectx: property (text), widget (QLabel)
#: rc.cpp:3
msgid "<b>Unable to contact the KDE smartcard service.</b>"
msgstr "<b>無法連結到 KDE Smart Card 服務。</b>"

#. i18n: file: nosmartcardbase.ui:35
#. i18n: ectx: property (title), widget (QGroupBox)
#: rc.cpp:6
msgid "Possible Reasons"
msgstr "可能原因"

#. i18n: file: nosmartcardbase.ui:49
#. i18n: ectx: property (text), widget (QLabel)
#: rc.cpp:9
msgid ""
"\n"
"1) The KDE daemon, 'kded' is not running. You can restart it by running the "
"command 'kdeinit' and then try reloading the KDE System Settings to see if "
"this message goes away.\n"
"\n"
"2) You do not appear to have smartcard support in the KDE libraries. You "
"will need to recompile the kdelibs package with libpcsclite installed."
msgstr ""
"\n"
" 1) KDE 的服務 'kded' 沒有啟動。您可以執行 'kdeinit' 來重新啟動它，然後試著重"
"新載入 KDE 系統設定，來看看這個訊息是否已經消失。\n"
"\n"
" 2) 您的 KDE 函式庫可能沒有包含 smartcard 的支援。您必須重新編譯您的 KDE 函式"
"庫套件 (kdelibs)，來增加函式庫 libpcsclite。"

#. i18n: file: smartcardbase.ui:31
#. i18n: ectx: attribute (title), widget (QWidget)
#: rc.cpp:15
msgid "Smartcard Support"
msgstr "Smart Card 支援"

#. i18n: file: smartcardbase.ui:42
#. i18n: ectx: property (text), widget (QCheckBox)
#: rc.cpp:18
msgid "&Enable smartcard support"
msgstr "啟動 Smart Card 支援 (&E)"

#. i18n: file: smartcardbase.ui:61
#. i18n: ectx: property (text), widget (QCheckBox)
#: rc.cpp:21
msgid "Enable &polling to autodetect card events"
msgstr "使用 &Polling 來自動偵測卡片的事件"

#. i18n: file: smartcardbase.ui:64
#. i18n: ectx: property (whatsThis), widget (QCheckBox)
#: rc.cpp:24
msgid ""
"In most cases you should have this enabled. It allows KDE to automatically "
"detect card insertion and reader hotplug events."
msgstr ""
"在大部份的情況下，這個設定應該設為開啟。它允許 KDE 自動偵測卡片的熱插拔事件。"

#. i18n: file: smartcardbase.ui:92
#. i18n: ectx: property (text), widget (QCheckBox)
#: rc.cpp:27
msgid "Automatically &launch card manager if inserted card is unclaimed"
msgstr "在插入卡片後，如果沒有其他存取卡片的要求，則自動啟動卡片管理程式。"

#. i18n: file: smartcardbase.ui:95
#. i18n: ectx: property (whatsThis), widget (QCheckBox)
#: rc.cpp:30
msgid ""
"When you insert a smartcard, KDE can automatically launch a management tool "
"if no other application attempts to use the card."
msgstr ""
"當您插入 Smart Card 而沒有其他的程式使用這張卡片時，KDE 可以自動的啟動卡片管"
"理工具。"

#. i18n: file: smartcardbase.ui:106
#. i18n: ectx: property (text), widget (QCheckBox)
#: rc.cpp:33
msgid "&Beep on card insert and removal"
msgstr "在卡片插入或拔出時發出嗶聲 (&B)"

#. i18n: file: smartcardbase.ui:135
#. i18n: ectx: attribute (title), widget (QWidget)
#: rc.cpp:36
msgid "Readers"
msgstr "讀卡機"

#. i18n: file: smartcardbase.ui:152
#. i18n: ectx: property (text), widget (K3ListView)
#: rc.cpp:39
msgid "Reader"
msgstr "讀卡機"

#. i18n: file: smartcardbase.ui:163
#. i18n: ectx: property (text), widget (K3ListView)
#: rc.cpp:42
msgid "Type"
msgstr "型態"

#. i18n: file: smartcardbase.ui:174
#. i18n: ectx: property (text), widget (K3ListView)
#: rc.cpp:45
msgid "Subtype"
msgstr "子型態"

#. i18n: file: smartcardbase.ui:185
#. i18n: ectx: property (text), widget (K3ListView)
#: rc.cpp:48
msgid "SubSubtype"
msgstr "次子型態 (SubsubType)"

#. i18n: file: smartcardbase.ui:228
#. i18n: ectx: property (title), widget (QGroupBox)
#: rc.cpp:51
msgid "PCSCLite Configuration"
msgstr "PCSCLite 設定"

#. i18n: file: smartcardbase.ui:251
#. i18n: ectx: property (text), widget (QLabel)
#: rc.cpp:54
msgid ""
"To add new readers you have to modify /etc/readers.conf file and re-start "
"pcscd"
msgstr "您可以透過修改 /etc/readers.conf，並重新啟動 pcscd 來新增一個讀卡機"

#: smartcard.cpp:64
msgid "kcmsmartcard"
msgstr "kcmsmartcard"

#: smartcard.cpp:64
msgid "KDE Smartcard Control Module"
msgstr "KDE Smart Card 控制模組"

#: smartcard.cpp:66
msgid "(c) 2001 George Staikos"
msgstr "(c) 2001 George Staikos"

#: smartcard.cpp:68
msgid "George Staikos"
msgstr "George Staikos"

#: smartcard.cpp:78
msgid "Change Module..."
msgstr "更換模組"

#: smartcard.cpp:133
msgid "Unable to launch KCardChooser"
msgstr "無法啟動 KCardChooser"

#: smartcard.cpp:182
msgid "No card inserted"
msgstr "沒有插入卡片"

#: smartcard.cpp:223
msgid "Smart card support disabled"
msgstr "Smart Card 支援關閉"

#: smartcard.cpp:234
msgid "No readers found. Check 'pcscd' is running"
msgstr "找不到任何讀卡機。請確認 'pcscd' 是啟動的"

#: smartcard.cpp:259 smartcard.cpp:279
msgid "NO ATR or no card inserted"
msgstr "沒有 ATR 或沒有插入卡片"

#: smartcard.cpp:291
msgid "Managed by: "
msgstr "管理："

#: smartcard.cpp:301
msgid "No module managing this card"
msgstr "沒有任何模組在管理這張卡片"

#: smartcard.cpp:394
msgid ""
"<h1>smartcard</h1> This module allows you to configure KDE support for "
"smartcards. These can be used for various tasks such as storing SSL "
"certificates and logging in to the system."
msgstr ""
"<h1>Smart Card</h1>這個模組允許您設定 KDE 來支援 Smart Card。它可以用在很多的"
"用途上，例如存放 SSL 的憑證，並使用它來登入系統。"