AbstractItemEditor Selectable Editable DragEnabled DropEnabled UserCheckable Enabled Tristate Unchecked PartiallyChecked Checked AddLinkDialog Insert Link Title: URL: BrushPropertyManager No brush Solid Dense 1 Dense 2 Dense 3 Dense 4 Dense 5 Dense 6 Dense 7 Horizontal Vertical Cross Backward diagonal Forward diagonal Crossing diagonal Style Color [%1, %2] CloseButton Close Tab 关闭标签页 Command Set action text Insert action Move action Change Title Insert Menu Add '%1' to '%2' Command description for adding buttons to a QButtonGroup Change layout of '%1' from %2 to %3 Change layout alignment Change signals/slots Change script Morph %1/'%2' into %3 MorphWidgetCommand description Insert '%1' Change Z-order of '%1' Raise '%1' Lower '%1' Delete '%1' Reparent '%1' Promote to custom widget Demote from custom widget Lay out using grid Lay out vertically Lay out horizontally Break layout Simplify Grid Layout Move Page Delete Page Page Insert Page Change Tab order Create Menu Bar Delete Menu Bar Create Status Bar Delete Status Bar Add Tool Bar Add Dock Window Adjust Size of '%1' Change Form Layout Item Geometry Change Layout Item Geometry Delete Subwindow Insert Subwindow Subwindow Change Table Contents Change Tree Contents Add action Remove action Add menu Remove menu Create submenu Delete Tool Bar Changed '%1' of '%2' Changed '%1' of %n objects Reset '%1' of '%2' Reset '%1' of %n objects Add dynamic property '%1' to '%2' Add dynamic property '%1' to %n objects Remove dynamic property '%1' from '%2' Remove dynamic property '%1' from %n objects Add connection Adjust connection Delete connections Change source Change target Change signal Change slot Change signal-slot connection Change sender Change receiver Create button group Break button group Break button group '%1' Add buttons to group Remove buttons from group Remove '%1' from '%2' Command description for removing buttons from a QButtonGroup ConnectDialog Configure Connection GroupBox Edit... Show signals and slots inherited from QWidget ConnectionDelegate <object> <signal> <slot> DPI_Chooser Standard (96 x 96) Embedded device standard screen resolution Greenphone (179 x 185) Embedded device screen resolution High (192 x 192) Embedded device high definition screen resolution Designer Custom Widgets Promoted Widgets Unable to launch %1. %1 timed out. Qt Designer This file contains top level spacers. They have NOT been saved into the form. Perhaps you forgot to create a layout? Invalid UI file: The root element <ui> is missing. An error has occurred while reading the UI file at line %1, column %2: %3 This file cannot be read because it was created using %1. This file was created using Designer from Qt-%1 and cannot be read. The converted file could not be read. This file was created using Designer from Qt-%1 and will be converted to a new form by Qt Designer. The old form has not been touched, but you will have to save the form under a new name. This file was created using Designer from Qt-%1 and could not be read: %2 Please run it through uic3 -convert to convert it to Qt-4's ui format. This file cannot be read because the extra info extension failed to load. DesignerMetaEnum %1 is not a valid enumeration value of '%2'. '%1' could not be converted to an enumeration value of type '%2'. DesignerMetaFlags '%1' could not be converted to a flag value of type '%2'. DeviceProfile '%1' is not a number. Reading a number for an embedded device profile An invalid tag <%1> was encountered. DeviceProfileDialog &Family &Point Size Style Device DPI Name 名称 Dialog Dialog EmbeddedOptionsControl <html><table><tr><td>Font</td><td>%1, %2</td></tr><tr><td>Style</td><td>%3</td></tr><tr><td>Resolution</td><td>%4 x %5</td></tr></table></html> Format embedded device profile description EmbeddedOptionsPage Embedded Design Tab in preferences dialog Device Profiles EmbeddedOptionsControl group box" FontPropertyManager PreferDefault NoAntialias PreferAntialias Antialiasing Form Form FormEditorOptionsPage %1 % Zoom percentage Preview Zoom Default Zoom Forms Tab in preferences dialog Default Grid FormLayoutRowDialog Add Form Layout Row &Label text: Field &type: &Field name: &Buddy: &Row: Label &name: FormWindow Unexpected element <%1> Error while pasting clipboard contents at line %1, column %2: %3 FormWindowSettings Form Settings Layout &Default &Spacing: &Margin: &Layout Function Ma&rgin: Spa&cing: &Pixmap Function &Include Hints Grid Embedded Design &Author IconSelector All Pixmaps ( ItemPropertyBrowser XX Icon Selected off Sample string to determinate the width for the first column of the list item property browser MAC_APPLICATION_MENU Services 服务 Hide %1 隐藏%1 Hide Others 隐藏其他 Show All 全部显示 Preferences... 偏好设置… Quit %1 退出 %1 About %1 关于 %1 MainWindow MainWindow ObjectInspectorModel Object Class separator <noname> ObjectNameDialog Change Object Name Object Name PluginDialog Plugin Information 1 PreviewConfigurationWidget Form Print/Preview Configuration Style Style sheet ... Device skin PromotionModel Not used Usage of promoted widgets QAbstractSocket Host not found 主机未找到 Connection refused 连接被拒绝 Connection timed out 连接超时 Operation on socket is not supported Socket操作不被支持 Socket operation timed out 套接字操作超时 Socket is not connected 套接字没有被连接 Network unreachable 网络不能访问 QAbstractSpinBox &Step up 增加(&S) Step &down 减少(&D) &Select All 选择全部(&S) QAccessibleButton Uncheck 取消选中 Check 选中 Press 按下 QApplication Activate 激活 Executable '%1' requires Qt %2, found Qt %3. 执行“%1”需要Qt %2，只找到了Qt %3。 Incompatible Qt Library Error 不兼容的Qt错误 QT_LAYOUT_DIRECTION Translate this string to the string 'LTR' in left-to-right languages or to 'RTL' in right-to-left languages (such as Hebrew and Arabic) to get proper widget layout. LTR Activates the program's main window 激活这个程序的主窗口 QCheckBox Uncheck 取消选中 Check 选中 Toggle 切换 QColorDialog Hu&e: 色调(&E)： &Sat: 饱和度(&S)： &Val: 亮度(&V)： &Red: 红色(&R)： &Green: 绿色(&G)： Bl&ue: 蓝色(&U)： A&lpha channel: Alpha通道(&A)： Select Color 选择颜色 &Basic colors 基本颜色(&B) &Custom colors 自定义颜色(&C) &Add to Custom Colors 添加到自定义颜色(&A) QComboBox Open 打开 False 假 True 真 Close 关闭 QCommandLineParser Displays version information. Displays this help. Unknown option '%1'. Unknown options: %1. Missing value after '%1'. Unexpected value after '%1'. [options] Usage: %1 Options: Arguments: QCoreApplication %1: key is empty QSystemSemaphore %1：键是空的 %1: unable to make key QSystemSemaphore %1：不能制造键 %1: ftok failed QSystemSemaphore %1：ftok 失败 %1 is not a promoted class. The base class %1 is invalid. The class %1 already exists. Promoted Widgets The class %1 cannot be removed The class %1 cannot be removed because it is still referenced. The class %1 cannot be renamed The class %1 cannot be renamed to an empty name. There is already a class named %1. Cannot set an empty include file. QDateTimeEdit AM AM am am PM PM pm pm QDeclarativeAbstractAnimation Cannot animate non-existent property "%1" Cannot animate read-only property "%1" Animation is an abstract class QDeclarativeAnchorAnimation Cannot set a duration of < 0 QDeclarativeAnchors Possible anchor loop detected on fill. Possible anchor loop detected on centerIn. Cannot anchor to an item that isn't a parent or sibling. Possible anchor loop detected on vertical anchor. Possible anchor loop detected on horizontal anchor. Cannot specify left, right, and hcenter anchors. Cannot anchor to a null item. Cannot anchor a horizontal edge to a vertical edge. Cannot anchor item to self. Cannot specify top, bottom, and vcenter anchors. Baseline anchor cannot be used in conjunction with top, bottom, or vcenter anchors. Cannot anchor a vertical edge to a horizontal edge. QDeclarativeAnimatedImage Qt was built without support for QMovie QDeclarativeApplication Application is an abstract class QDeclarativeBehavior Cannot change the animation assigned to a Behavior. QDeclarativeBinding Binding loop detected for property "%1" QDeclarativeCompiledBindings Binding loop detected for property "%1" QDeclarativeCompiler Invalid property assignment: "%1" is a read-only property Invalid property assignment: unknown enumeration Invalid property assignment: string expected Invalid property assignment: url expected Invalid property assignment: unsigned int expected Invalid property assignment: int expected Invalid property assignment: number expected Invalid property assignment: color expected Invalid property assignment: date expected Invalid property assignment: time expected Invalid property assignment: datetime expected Invalid property assignment: point expected Invalid property assignment: size expected Invalid property assignment: rect expected Invalid property assignment: boolean expected Invalid property assignment: 3D vector expected Invalid property assignment: unsupported type "%1" Element is not creatable. Component elements may not contain properties other than id Invalid component id specification id is not unique Invalid component body specification Component objects cannot declare new properties. Component objects cannot declare new signals. Component objects cannot declare new functions. Cannot create empty component specification "%1.%2" is not available in %3 %4.%5. "%1.%2" is not available due to component versioning. Incorrectly specified signal assignment Cannot assign a value to a signal (expecting a script to be run) Empty signal assignment Empty property assignment Attached properties cannot be used here Non-existent attached object Invalid attached object assignment Cannot assign to non-existent default property Cannot assign to non-existent property "%1" Invalid use of namespace Not an attached property name Invalid use of id property Property has already been assigned a value Invalid grouped property access Cannot assign a value directly to a grouped property Invalid property use Property assignment expected Single property assignment expected Unexpected object assignment Cannot assign object to list Can only assign one binding to lists Cannot assign primitives to lists Cannot assign multiple values to a script property Invalid property assignment: script expected Cannot assign multiple values to a singular property Cannot assign object to property "%1" cannot operate on "%2" Duplicate default property Duplicate property name Property names cannot begin with an upper case letter Illegal property name Duplicate signal name Signal names cannot begin with an upper case letter Illegal signal name Duplicate method name Method names cannot begin with an upper case letter Illegal method name Property value set multiple times Invalid property nesting Cannot override FINAL property Invalid property type Invalid empty ID IDs cannot start with an uppercase letter IDs must start with a letter or underscore IDs must contain only letters, numbers, and underscores ID illegally masks global JavaScript property No property alias location Invalid alias location Invalid alias reference. An alias reference must be specified as <id>, <id>.<property> or <id>.<value property>.<property> Invalid alias reference. Unable to find id "%1" Alias property exceeds alias bounds QDeclarativeComponent Invalid empty URL createObject: value is not an object QDeclarativeConnections Cannot assign to non-existent property "%1" Connections: nested objects not allowed Connections: syntax error Connections: script expected QDeclarativeFlipable front is a write-once property back is a write-once property QDeclarativeImportDatabase plugin cannot be loaded for module "%1": %2 module "%1" plugin "%2" not found module "%1" version %2.%3 is not installed module "%1" is not installed "%1": no such directory import "%1" has no qmldir and no namespace - %1 is not a namespace - nested namespaces not allowed local directory is ambiguous. Found in %1 and in %2 is ambiguous. Found in %1 in version %2.%3 and %4.%5 is instantiated recursively is not a type File name case mismatch for "%1" QDeclarativeKeyNavigationAttached KeyNavigation is only available via attached properties QDeclarativeKeysAttached Keys is only available via attached properties QDeclarativeLayoutMirroringAttached LayoutMirroring is only available via attached properties LayoutDirection attached property only works with Items QDeclarativeListModel remove: index %1 out of range insert: value is not an object insert: index %1 out of range move: out of range append: value is not an object set: value is not an object set: index %1 out of range ListElement: cannot contain nested elements ListElement: cannot use reserved "id" property ListElement: cannot use script for property value ListModel: undefined property '%1' QDeclarativeLoader Loader does not support loading non-visual elements. QDeclarativeParentAnimation Unable to preserve appearance under complex transform Unable to preserve appearance under non-uniform scale Unable to preserve appearance under scale of 0 QDeclarativeParentChange Unable to preserve appearance under complex transform Unable to preserve appearance under non-uniform scale Unable to preserve appearance under scale of 0 QDeclarativeParser Property value set multiple times Expected type name Invalid import qualifier ID Reserved name "Qt" cannot be used as an qualifier Script import qualifiers must be unique. Script import requires a qualifier Library import requires a version Expected parameter type Invalid property type modifier Unexpected property type modifier Expected property type Readonly not yet supported JavaScript declaration outside Script element Illegal unicode escape sequence Illegal character Unclosed string at end of line Illegal escape sequence Unclosed comment at end of file Illegal syntax for exponential number Identifier cannot start with numeric literal Unterminated regular expression literal Invalid regular expression flag '%0' Unterminated regular expression backslash sequence Unterminated regular expression class Syntax error Unexpected token `%1' Expected token `%1' QDeclarativePauseAnimation Cannot set a duration of < 0 QDeclarativePixmap Error decoding: %1: %2 Failed to get image from provider: %1 Cannot open: %1 QDeclarativePropertyAnimation Cannot set a duration of < 0 QDeclarativePropertyChanges PropertyChanges does not support creating state-specific objects. Cannot assign to non-existent property "%1" Cannot assign to read-only property "%1" QDeclarativeTextInput Could not load cursor delegate Could not instantiate cursor delegate QDeclarativeTypeLoader Script %1 unavailable Type %1 unavailable Namespace %1 cannot be used as a type %1 %2 %1% {1 %2?} QDeclarativeVME Unable to create object of type %1 Cannot assign value %1 to property %2 Cannot assign object type %1 with no default method Cannot connect mismatched signal/slot %1 %vs. %2 Cannot assign an object to signal property %1 Cannot assign object to list Cannot assign object to interface property Unable to create attached object Cannot set properties on %1 as it is null QDeclarativeVisualDataModel Delegate component must be Item type. QDeclarativeXmlListModel Qt was built without support for xmlpatterns QDesignerFormBuilder Script errors occurred: The preview failed to build. Designer QDesignerMenu Type Here Add Separator Insert separator Remove separator Remove action '%1' Add separator Insert action QDesignerMenuBar Type Here Remove Menu '%1' Remove Menu Bar Menu QDesignerPluginManager An XML error was encountered when parsing the XML of the custom widget %1: %2 A required attribute ('%1') is missing. An invalid property specification ('%1') was encountered. Supported types: %2 '%1' is not a valid string property specification. The XML of the custom widget %1 does not contain any of the elements <widget> or <ui>. The class attribute for the class %1 is missing. The class attribute for the class %1 does not match the class name %2. QDesignerPropertySheet Dynamic Properties QDesignerResource The layout type '%1' is not supported, defaulting to grid. The container extension of the widget '%1' (%2) returned a widget not managed by Designer '%3' (%4) when queried for page #%5. Container pages should only be added by specifying them in XML returned by the domXml() method of the custom widget. Unexpected element <%1> Parsing clipboard contents Error while pasting clipboard contents at line %1, column %2: %3 Parsing clipboard contents Error while pasting clipboard contents: The root element <ui> is missing. Parsing clipboard contents QDesignerSharedSettings The template path %1 could not be created. An error has been encountered while parsing device profile XML: %1 QDesignerWidgetBox An error has been encountered at line %1 of %2: %3 Unexpected element <%1> encountered when parsing for <widget> or <ui> Unexpected end of file encountered when parsing widgets. A widget element could not be found. QDial QDial QDial SpeedoMeter SpeedoMeter SliderHandle SliderHandle QDialog What's This? 这是什么？ Done 完成 QDialogButtonBox OK 确定 Save 保存 &Save 保存(&S) Open 打开 Cancel 取消 &Cancel 取消(&C) Close 关闭 &Close 关闭(&C) Apply 应用 Reset 重置 Help 帮助 Don't Save 不保存 Discard 抛弃 &Yes 是(&Y) Yes to &All 全部是(&A) &No 否(&N) N&o to All 全部否(&O) Save All 保存全部 Abort 放弃 Retry 重试 Ignore 忽略 Restore Defaults 恢复默认 Close without Saving 不保存关闭 &OK 确定(&O) QDirModel Name 名称 Size 大小 Kind Match OS X Finder 类型 Type All other platforms 类型 Date Modified 日期被修改 QDockWidget Close 关闭 Dock 锚接 Float 浮动 QDoubleSpinBox More 更多 Less 更少 QErrorMessage Debug Message: 调试消息： Warning: 警告： Fatal Error: 致命错误： &Show this message again 再次显示这个消息(&S) &OK 确定(&O) QFile Destination file exists 目标文件已存在 Will not rename sequential file using block copy Cannot remove source file Cannot open %1 for input 无法输入 %1 Cannot open for output 无法输出 Failure to write block 写块失败 Cannot create %1 for output 无法创建 %1 No file engine available or engine does not support UnMapExtension QFileDialog All Files (*) 所有文件 (*) Directories 目录 &Open 打开(&O) &Save 保存(&S) Open 打开 %1 already exists. Do you want to replace it? %1已经存在。你想要替换它么？ %1 File not found. Please verify the correct file name was given. 文件%1 没有找到。请核实已给定正确文件名。 My Computer 我的计算机 &Rename 重命名(&R) &Delete 删除(&D) Show &hidden files 显示隐藏文件(&H) Directory: 目录： %1 Directory not found. Please verify the correct directory name was given. 目录%1 没有找到。请核实已给定正确目录名。 '%1' is write protected. Do you want to delete it anyway? “%1“是写保护的。你还是想删除它么？ Are sure you want to delete '%1'? 你确认你想删除“%1“？ Could not delete directory. 不能删除目录。 Recent Places 最近的地方 Save As 另存为 Drive 驱动器 File 文件 File Folder Match Windows Explorer Folder All other platforms Alias Mac OS X Finder Shortcut All other platforms Unknown 未知的 Find Directory 查找目录 Show 显示 New Folder 新建文件夹 &New Folder 新建文件夹(&N) &Choose 选择(&C) Remove 移除 File &name: 文件名称(&N)： Look in: Back 后退 Go back Forward 前进 Go forward Parent Directory Go to the parent directory Create New Folder Create a New Folder List View Change to list view mode Detail View Change to detail view mode Files of type: QFileSystemModel %1 TB %1 TB %1 GB %1 GB %1 MB %1 MB %1 KB %1千字节 %1 byte(s) %1 bytes %1字节 Invalid filename 无效文件名 The name "%1" can not be used.Try using another name, with fewer characters or no punctuations marks. 名称“%1“不能被使用。请使用另外一个包含更少字符或者不含有标点符号的名称。 Name 名称 Size 大小 Kind Match OS X Finder 类型 Type All other platforms 类型 Date Modified 修改时间 My Computer 我的计算机 Computer 计算机 QFontDatabase Normal 普通 Bold 粗体 Demi Bold 半粗体 Black 黑体 Demi 半体 Light 轻体 Italic 意大利体 Oblique 斜体 Any 任意 Latin 拉丁文 Greek 希腊文 Cyrillic 西里尔文 Armenian 亚美尼亚文 Hebrew 希伯来文 Arabic 阿拉伯文 Syriac 叙利亚文 Thaana 马尔代夫文 Devanagari 梵文 Bengali 孟加拉文 Gurmukhi 旁遮普文 Gujarati 古吉拉特文 Oriya 奥里雅文 Tamil 泰米尔文 Telugu 泰卢固文 Kannada 埃纳德文 Malayalam 马拉亚拉姆文 Sinhala 僧伽罗文 Thai 泰国文 Lao 老挝文 Tibetan 藏文 Myanmar 缅甸文 Georgian 格鲁吉亚文 Khmer 谷美尔文 Simplified Chinese 简体中文 Traditional Chinese 繁体中文 Japanese 日文 Korean 韩文 Vietnamese 越南文 Symbol 符号 Ogham 欧甘文 Runic 古北欧文 N'Ko QFontDialog &Font 字体(&F) Font st&yle 字体风格(&Y) &Size 大小(&S) Effects 效果 Stri&keout 删除线(&K) &Underline 下划线(&U) Sample 实例 Wr&iting System 书写系统(&I) Select Font 选择字体 QFtp Not connected 没有连接 Host %1 not found 主机%1没有找到 Connection refused to host %1 连接被主机 %1 拒绝 Connection timed out to host %1 主机%1连接超时 Connected to host %1 连接到主机%1了 Connection refused for data connection 因为数据连接而被拒绝连接 Unknown error 未知的错误 Connecting to host failed: %1 连接主机失败： %1 Login failed: %1 登录失败： %1 Listing directory failed: %1 列出目录失败： %1 Changing directory failed: %1 改变目录失败： %1 Downloading file failed: %1 下载文件失败： %1 Uploading file failed: %1 上传文件失败： %1 Removing file failed: %1 移除文件失败： %1 Creating directory failed: %1 创建目录失败： %1 Removing directory failed: %1 移除目录失败： %1 Connection closed 连接关闭了 QGroupBox Toggle 切换 QHostInfo Unknown error 未知的错误 No host name given 未指定主机名 QHostInfoAgent Host not found 主机未找到 No host name given 未指定主机名 Invalid hostname Unknown address type 未知的地址类型 Unknown error 未知的错误 QHttp Unknown error 未知的错误 Request aborted 请求被放弃了 No server set to connect to 没有设置要连接的服务器 Wrong content length 错误的内容长度 Server closed connection unexpectedly 服务器异常地关闭了连接 Unknown authentication method Error writing response to device 向设备中进行写回复时发生错误 Connection refused 连接被拒绝 Host %1 not found 主机%1没有找到 HTTP request failed HTTP请求失败 Invalid HTTP response header 无效的HTTP响应头 Invalid HTTP chunked body 无效的HTTP臃肿体 Connection closed 连接关闭了 Proxy authentication required 代理需要认证 Authentication required 需要认证 Connection refused (or timed out) 连接被拒绝(或者超时) Proxy requires authentication 代理需要验证 Host requires authentication 主机需要验证 Data corrupted 数据错误 Unknown protocol specified 所指定的协议是未知的 SSL handshake failed SSL 握手失败 HTTPS connection requested but SSL support not compiled in HTTPS 连接需要 SSL，但它没有被编译进来 QHttpSocketEngine Did not receive HTTP response from proxy 未收到代理的HTTP响应 Error parsing authentication request from proxy 解析代理的认证请求出错 Authentication required 需要认证 Proxy denied connection 代理拒绝连接 Error communicating with HTTP proxy 和HTTP代理通讯时发生错误 Proxy server not found 未找到代理服务器 Proxy connection refused 代理连接被拒绝 Proxy server connection timed out 代理服务器连接超时 Proxy connection closed prematurely 代理连接过早关闭 QIODevice Permission denied 权限被拒绝 Too many open files 太多打开的文件 No such file or directory 没有这个文件或者目录 No space left on device 设备上没有空间了 Unknown error 未知的错误 QInputContext XIM XIM XIM input method XIM输入法 Windows input method Windows输入法 Mac OS X input method Mac OS X输入法 QInputDialog Enter a value: 输入一个值： QJsonParseError no error occurred 没有错误发生 unterminated object missing name separator unterminated array missing value separator illegal value invalid termination by number illegal number invalid escape sequence invalid UTF8 string unterminated string object is missing after a comma too deeply nested document too large document QLibrary Plugin verification data mismatch in '%1' “%1“中的插件验证数据不匹配 The plugin '%1' uses incompatible Qt library. (%2.%3.%4) [%5] 插件“%1”使用了不兼容的Qt库。(%2.%3.%4) [%5] Unknown error 未知的错误 The shared library was not found. 共享库没有被找到。 The file '%1' is not a valid Qt plugin. 文件“%1“不是有效的Qt插件。 The plugin '%1' uses incompatible Qt library. (Cannot mix debug and release libraries.) 插件“%1“使用了不兼容的Qt库。(不能混合使用库的调试版本和发布版本。) Cannot load library %1: %2 无法加载库%1：%2 Cannot unload library %1: %2 无法卸载库%1：%2 Cannot resolve symbol "%1" in %2: %3 无法解析%1中的符号“%2”：%3 '%1' is not an ELF object (%2) '%1' is not an ELF object '%1' is an invalid ELF object (%2) QLineEdit &Undo 撤消(&U) &Redo 恢复(&R) Cu&t 剪切(&T) &Copy 复制(&C) &Paste 粘贴(&P) Delete 删除 Select All 选择全部 QLocalServer %1: Name error %1: 名称错误 %1: Permission denied %1：权限被拒绝 %1: Address in use %1：地址正在被使用 %1: Unknown error %2 %1：未知错误 %2 QLocalSocket %1: Connection refused %1：连接被拒绝 %1: Remote closed %1：远程已关闭 %1: Invalid name %1：无效名称 %1: Socket access error %1：套接字访问错误 %1: Socket resource error %1：套接字资源错误 %1: Socket operation timed out %1：套接字操作超时 %1: Datagram too large %1：数据报太大 %1: Connection error %1：连接错误 %1: The socket operation is not supported %1：套接字操作不被支持 %1: Unknown error %1：未知错误 %1: Unknown error %2 %1：未知错误 %2 QMYSQLDriver Unable to open database ' 不能打开数据库 Unable to connect 不能连接 Unable to begin transaction 不能开始事务 Unable to commit transaction 不能提交事务 Unable to rollback transaction 不能回滚事务 QMYSQLResult Unable to fetch data 不能获取数据 Unable to execute query 不能执行查询 Unable to store result 不能存储结果 Unable to prepare statement 不能准备语句 Unable to reset statement 不能重置语句 Unable to bind value 不能绑定值 Unable to execute statement 不能执行语句 Unable to bind outvalues 不能绑定外值 Unable to store statement results 不能存储语句结果 Unable to execute next query 不能执行下一个查询 Unable to store next result 不能存储下一个结果 QMdiArea (Untitled) (未命名的) QMdiSubWindow %1 - [%2] %1 - [%2] Close 关闭 Minimize 最小化 Restore Down 向下恢复 &Restore 恢复(&R) &Move 移动(&M) &Size 大小(&S) Mi&nimize 最小化(&N) Ma&ximize 最大化(&X) Stay on &Top 总在最前(&T) &Close 关闭(&C) - [%1] - [%1] Maximize 最大化 Unshade 取消遮蔽 Shade 遮蔽 Restore 恢复 Help 帮助 Menu 菜单 QMenu Close 关闭 Open 打开 Execute 执行 QMenuBar Corner Toolbar QMessageBox Help 帮助 OK 确定 <h3>About Qt</h3>This program uses Qt version %1. Qt is a C++ toolkit for cross-platform application development.Qt provides single-source portability across all major desktop operating systems. It is also available for embedded Linux and other embedded and mobile operating systems.Qt is available under three different licensing options designed to accommodate the needs of our various users.Qt licensed under our commercial license agreement is appropriate for development of proprietary/commercial software where you do not want to share any source code with third parties or otherwise cannot comply with the terms of the GNU LGPL version 3 or GNU LGPL version 2.1.Qt licensed under the GNU LGPL version 3 is appropriate for the development of Qt applications provided you can comply with the terms and conditions of the GNU LGPL version 3.Qt licensed under the GNU LGPL version 2.1 is appropriate for the development of Qt applications provided you can comply with the terms and conditions of the GNU LGPL version 2.1.Please see <a href="http://%2/">%2</a> for an overview of Qt licensing.Copyright (C) %1 The Qt Company Ltd and other contributors.Qt and the Qt logo are trademarks of The Qt Company Ltd.Qt is The Qt Company Ltd product developed as an open source project. See <a href="http://%3/">%3</a> for more information. About Qt 关于Qt Show Details... 显示细节…… Hide Details... 隐藏细节…… QMultiInputContext Select IM 选择输入法 QMultiInputContextPlugin Multiple input method switcher 多输入法切换器 Multiple input method switcher that uses the context menu of the text widgets 使用文本窗口部件上下文菜单的多输入法切换器 QNativeSocketEngine The remote host closed the connection 远端主机关闭了这个连接 Network operation timed out 网络操作超时 Out of resources 资源耗尽了 Unsupported socket operation 不被支持的套接字操作 Protocol type not supported 协议类型不被支持 Invalid socket descriptor 无效的套接字描述符 Network unreachable 网络不能访问 Permission denied 权限被拒绝 Connection timed out 连接超时 Connection refused 连接被拒绝 The bound address is already in use 要启用的地址已经被使用 The address is not available 这个地址不可用 The address is protected 这个地址被保护了 Unable to send a message 不能发送一个消息 Unable to receive a message 不能接收一个消息 Unable to write 不能写入 Network error 网络错误 Another socket is already listening on the same port 另一个套接字已经正在监听同一端口 Unable to initialize non-blocking socket 不能初始化非阻塞套接字 Unable to initialize broadcast socket 不能初始化广播套接字 Attempt to use IPv6 socket on a platform with no IPv6 support 试图在不支持IPv6支持的平台上使用IPv6套接字 Host unreachable 主机不能访问 Datagram was too large to send 不能发送过大的数据报 Operation on non-socket 对非套接字操作 Unknown error 未知的错误 The proxy type is invalid for this operation 对于这个操作代理类型是无效的。 QNetworkAccessCacheBackend Error opening %1 打开%1发生错误 QNetworkAccessDataBackend Invalid URI: %1 无效的 URI：%1 QNetworkAccessDebugPipeBackend Write error writing to %1: %2 写入 %1 错误：%2 Socket error on %1: %2 %1 上的套接字错误：%2 Remote host closed the connection prematurely on %1 远程主机过早地关闭了在 %1 上的这个连接 QNetworkAccessFileBackend Request for opening non-local file %1 正在打开非本地文件 %1 的请求 Error opening %1: %2 打开 %1 错误：%2 Write error writing to %1: %2 写入 %1 错误：%2 Cannot open %1: Path is a directory 无法打开 %1：路径是一个目录 Read error reading from %1: %2 读取 %1 错误：%2 QNetworkAccessFtpBackend No suitable proxy found 未找到合适的代理 Cannot open %1: is a directory 无法读取 %1：是一个目录 Logging in to %1 failed: authentication required 登入 %1 失败：需要验证 Error while downloading %1: %2 下载 %1 时错误：%2 Error while uploading %1: %2 上载 %1 时错误：%2 QNetworkAccessHttpBackend No suitable proxy found 未找到合适的代理 QNetworkAccessManager Network access is disabled. QNetworkReply Error downloading %1 - server replied: %2 下载 %1 错误 - 服务器回复：%2 Protocol "%1" is unknown 协议“%1”是未知的 Network session error. backend start error. Temporary network failure. QNetworkReplyImpl Operation canceled 操作被取消 QNetworkSession Invalid configuration. QNetworkSessionPrivateImpl Unknown session error. The session was aborted by the user or system. The requested operation is not supported by the system. The specified configuration cannot be used. Roaming was aborted or is not possible. QODBCDriver Unable to connect 不能连接 Unable to connect - Driver doesn't support all functionality required Unable to disable autocommit 不能禁止自动提交 Unable to commit transaction 不能提交事务 Unable to rollback transaction 不能回滚事务 Unable to enable autocommit 不能打开自动提交 QODBCResult QODBCResult::reset: Unable to set 'SQL_CURSOR_STATIC' as statement attribute. Please check your ODBC driver configuration QODBCResult::reset: 不能把“SQL_CURSOR_STATIC”设置为语句属性。请检查你的ODBC驱动程序设置。 Unable to execute statement 不能执行语句 Unable to fetch next 不能获取下一个 Unable to prepare statement 不能准备语句 Unable to bind variable 不能帮定变量 Unable to fetch last 不能获取最后一个 Unable to fetch 不能获取 Unable to fetch first 不能获取第一个 Unable to fetch previous 不能获取上一个 QObject Could not read image data Sequential device (eg socket) for image read not supported Seek file/device for image read failed Image mHeader read failed Image type not supported Image depth not valid Could not seek to image read footer Could not read footer Image type (non-TrueVision 2.0) not supported Could not reset to start position QPPDOptionsModel Name 名称 Value 值 QPSQLDriver Unable to connect 不能连接 Could not begin transaction 不能开始事务 Could not commit transaction 不能提交事务 Could not rollback transaction 不能回滚事务 Unable to subscribe 不能订阅 Unable to unsubscribe 不能取消订阅 QPSQLResult Unable to create query 不能创建查询 Unable to prepare statement 不能准备语句 QPageSetupWidget Centimeters (cm) 厘米 (cm) Millimeters (mm) 毫米 (mm) Inches (in) 英寸 (in) Points (pt) 点 (pt) Form Paper Page size: Width: Height: Paper source: Orientation Portrait 纵向 Landscape 横向 Reverse landscape Reverse portrait Margins top margin left margin right margin bottom margin QPluginLoader Unknown error 未知的错误 The plugin was not loaded. 插件没有被载入。 QPrintDialog locally connected 本地已经连接的 Aliases: %1 别名：%1 unknown 未知的 Print 打印 Print To File ... 打印到文件…… File %1 is not writable. Please choose a different file name. 文件%1不可写。请选择一个不同的文件名。 %1 already exists. Do you want to overwrite it? %1已经存在。你想覆盖它么？ %1 is a directory. Please choose a different file name. %1是目录。请选择一个不同的文件名。 A0 A0 A1 A1 A2 A2 A3 A3 A4 A4 A5 A5 A6 A6 A7 A7 A8 A8 A9 A9 B0 B0 B1 B1 B2 B2 B3 B3 B4 B4 B5 B5 B6 B6 B7 B7 B8 B8 B9 B9 B10 B10 C5E C5E DLE DLE Executive 决策文书 Folio 对开纸 Ledger 帐页 Legal 法律文书 Letter 信纸 Tabloid 小型报纸 US Common #10 Envelope 美国普通10号信封 Custom 自定义 &Options >> 选项(&O) >> &Print 打印(&P) &Options << 选项(&O) << Print to File (PDF) 打印到文件(PDF) Print to File (Postscript) 打印到文件(Postscript) Local file 本地文件 Write %1 file 写入 %1 文件 QPrintPreviewDialog Page Setup 页面设置 %1% %1% Print Preview 打印预览 Next page 下一页 Previous page 上一页 First page 第一页 Last page 最后一页 Fit width 适应宽度 Fit page 适应页面 Zoom in 放大 Zoom out 缩小 Portrait 纵向 Landscape 横向 Show single page 显示单页 Show facing pages 显示当前页 Show overview of all pages 显示所有页的概览 Print 打印 Page setup 打印设置 Close 关闭 Export to PDF 导出为PDF Export to PostScript 导出为PostScript QPrintPropertiesWidget Form Page Advanced QPrintSettingsOutput Form Copies Print range 打印范围 Print all 打印全部 Pages from to Current Page Selection Output Settings Copies: Collate Reverse Options 选项 Color Mode Color Grayscale Duplex Printing None Long side Short side QPrintWidget Form Printer &Name: P&roperties Location: Preview Type: Output &file: ... QProcess Could not open input redirection for reading 无法打开用于读取的输入重定向 Could not open output redirection for writing 无法打开用于写入的输出重定向 Resource error (fork failure): %1 资源错误(fork失败)：%1 Process operation timed out 进程处理超时 Error reading from process 从进程中读取时发生错误 Error writing to process 向进程写入时发生错误 Process crashed 进程已崩溃 No program defined QProgressDialog Cancel 撤消 QPushButton Open 打开 QRadioButton Check 选中 QRegExp no error occurred 没有错误发生 disabled feature used 使用了失效的特效 bad char class syntax 错误的字符类语法 bad lookahead syntax 错误的预测语法 lookbehinds not supported, see QTBUG-2371 bad repetition syntax 错误的重复语法 invalid octal value 无效的八进制数值 missing left delim 找不到左分隔符 unexpected end 意外的终止 met internal limit 遇到内部限制 invalid interval invalid category QSQLiteDriver Error opening database 打开数据库错误 Error closing database 关闭数据库错误 Unable to begin transaction 不能开始事务 Unable to commit transaction 不能提交事务 Unable to rollback transaction 不能回滚事务 QSQLiteResult Unable to fetch row 不能获取行 Unable to execute statement 不能执行语句 Unable to execute multiple statements at a time Unable to reset statement 不能重置语句 Unable to bind parameters 不能绑定参数 Parameter count mismatch 参数数量不匹配 No query 没有查询 QScriptBreakpointsModel ID Location Condition Ignore-count Single-shot Hit-count QScriptBreakpointsWidget New Delete QScriptDebugger Go to Line Line: Interrupt Shift+F5 Continue 继续 F5 Step Into F11 Step Over F10 Step Out Shift+F11 Run to Cursor Ctrl+F10 Run to New Script Toggle Breakpoint F9 Clear Debug Output Clear Error Log Clear Console &Find in Script... Ctrl+F Find &Next F3 Find &Previous Shift+F3 Ctrl+G Debug QScriptDebuggerCodeFinderWidget Close 关闭 Previous Next Case Sensitive Whole words <img src=":/qt/scripttools/debugging/images/wrap.png"> Search wrapped QScriptDebuggerLocalsModel Name 名称 Value 值 QScriptDebuggerStackModel Level Name 名称 Location QScriptEdit Toggle Breakpoint Disable Breakpoint Enable Breakpoint Breakpoint Condition: QScriptEngineDebugger Loaded Scripts Breakpoints Stack Locals Console Debug Output Error Log Search 搜索 View Qt Script Debugger QScriptNewBreakpointWidget Close 关闭 QScrollBar Scroll here 滚动到这里 Left edge 左边缘 Top 顶部 Right edge 右边缘 Bottom 底部 Page left 左一页 Page up 上一页 Page right 右一页 Page down 下一页 Scroll left 向左滚动 Scroll up 向上滚动 Scroll right 向右滚动 Scroll down 向下滚动 Line up 向上排列 Position 位置 Line down 向下排列 QSharedMemory %1: unable to set key on lock %1：无法设置锁定的键 %1: create size is less then 0 %1：创建的大小小于 0 %1: unable to lock %1：无法锁定 %1: unable to unlock %1：无法取消锁定 %1: permission denied %1：权限被拒绝 %1: already exists %1：已经存在 %1: doesn't exist %1: out of resources %1：资源耗尽了 %1: unknown error %2 %1：未知错误 %2 %1: key is empty %1：键是空的 %1: UNIX key file doesn't exist %1: ftok failed %1：ftok 失败 %1: unable to make key %1：不能制造键 %1: system-imposed size restrictions %1：系统预设大小限制 %1: bad name %1: not attached %1：没有附加 %1: invalid size %1：无效大小 QShortcut Space This and all following "incomprehensible" strings in QShortcut context are key names. Please use the localized names appearing on actual keyboards or whatever is commonly used. 空格 Esc Esc Tab Tab Backtab Backtab Backspace Backspace Return Return Enter Enter Ins Ins Del Del Pause Pause Print Print SysReq SysReq Home Home End End Left Left Up Up Right Right Down Down PgUp PgUp PgDown PgDown CapsLock CapsLock NumLock NumLock ScrollLock ScrollLock Menu Menu Help Help Back 后退 Forward 前进 Stop 停止 Refresh 刷新 Volume Down 调小音量 Volume Mute 静音 Volume Up 调大音量 Bass Boost 低音增强 Bass Up 调大低音 Bass Down 调小低音 Treble Up 调大高音 Treble Down 调小高音 Media Play 多媒体播放 Media Stop 多媒体停止 Media Previous 上一个多媒体 Media Next 下一个多媒体 Media Record 多媒体记录 Media Pause Media player pause button Toggle Media Play/Pause Media player button to toggle between playing and paused Favorites 最喜爱的 Search 搜索 Standby 等待 Open URL 打开URL Launch Mail 启动邮件 Launch Media 启动多媒体 Launch (0) 启动 (0) Launch (1) 启动 (1) Launch (2) 启动 (2) Launch (3) 启动 (3) Launch (4) 启动 (4) Launch (5) 启动 (5) Launch (6) 启动 (6) Launch (7) 启动 (7) Launch (8) 启动 (8) Launch (9) 启动 (9) Launch (A) 启动 (A) Launch (B) 启动 (B) Launch (C) 启动 (C) Launch (D) 启动 (D) Launch (E) 启动 (E) Launch (F) 启动 (F) Monitor Brightness Up Monitor Brightness Down Keyboard Light On/Off Keyboard Brightness Up Keyboard Brightness Down Power Off Wake Up Eject Screensaver WWW Sleep LightBulb Shop History Add Favorite Hot Links Adjust Brightness Finance Community Audio Rewind Back Forward Application Left Application Right Book CD Calculator Clear 清空 Clear Grab Close 关闭 Copy 复制 Cut 剪切 Display DOS Documents Spreadsheet Browser Game Go iTouch Logoff Market Meeting Keyboard Menu Menu PB My Sites News Home Office Option Paste 粘贴 Phone Reply Reload 重新载入 Rotate Windows Rotation PB Rotation KB Save 保存 Send Spellchecker Split Screen Support Task Panel Terminal Tools Travel Video 视频 Word Processor XFer Zoom In Zoom Out Away Messenger WebCam Mail Forward Pictures Music 音乐 Battery Bluetooth Wireless Ultra Wide Band Audio Forward Audio Repeat Audio Random Play Subtitle Audio Cycle Track Time View Top Menu Suspend Hibernate Print Screen Print Screen Page Up Page Up Page Down Page Down Caps Lock Caps Lock Num Lock Num Lock Number Lock Number Lock Scroll Lock Scroll Lock Insert Insert Delete Delete Escape Escape System Request System Request Select 选择 Yes 是 No 否 Context1 上下文1 Context2 上下文2 Context3 上下文3 Context4 上下文4 Call Button to start a call (note: a separate button is used to end the call) 呼叫 Hangup Button to end a call (note: a separate button is used to start the call) 挂起 Toggle Call/Hangup Button that will hang up if we're in call, or make a call if we're not. Flip 翻转 Voice Dial Button to trigger voice dialing Last Number Redial Button to redial the last number called Camera Shutter Button to trigger the camera shutter (take a picture) Camera Focus Button to focus the camera Kanji Muhenkan Henkan Romaji Hiragana Katakana Hiragana Katakana Zenkaku Hankaku Zenkaku Hankaku Touroku Massyo Kana Lock Kana Shift Eisu Shift Eisu toggle Code input Multiple Candidate Previous Candidate Hangul Hangul Start Hangul End Hangul Hanja Hangul Jamo Hangul Romaja Hangul Jeonja Hangul Banja Hangul PreHanja Hangul PostHanja Hangul Special Ctrl Ctrl Shift Shift Alt Alt Meta Meta + + F%1 F%1 Home Page 主页 QSlider Page left 左一页 Page up 上一页 Position 位置 Page right 右一页 Page down 下一页 QSocks5SocketEngine Connection to proxy refused 代理拒绝连接 Connection to proxy closed prematurely 代理连接过早关闭 Proxy host not found 代理主机未找到 Connection to proxy timed out 代理连接超时 Proxy authentication failed 代理认证失败 Proxy authentication failed: %1 代理认证失败: %1 SOCKS version 5 protocol error SOCKS版本5协议错误 General SOCKSv5 server failure 常规服务器失败 Connection not allowed by SOCKSv5 server 连接不被SOCKSv5服务器允许 TTL expired TTL已过期 SOCKSv5 command not supported 不支持的SOCKSv5命令 Address type not supported 不支持的地址类型 Unknown SOCKSv5 proxy error code 0x%1 未知SOCKSv5代理，错误代码 0x%1 Network operation timed out 网络操作超时 QSpinBox More 更多 Less 更少 QSslSocket Unable to write data: %1 不能写入数据：%1 Unable to decrypt data: %1 The TLS/SSL connection has been closed Error while reading: %1 读取时错误：%1 Error during SSL handshake: %1 SSL握手错误：%1 Error creating SSL context (%1) 创建SSL上下文错误（%1） Invalid or empty cipher list (%1) 无效或者空白的密码列表（%1） Private key does not certify public key, %1 Error creating SSL session, %1 创建SSL会话错误，%1 Error creating SSL session: %1 创建SSL会话错误：%1 Cannot provide a certificate with no key, %1 不能提供没有键的证书，%1 Error loading local certificate, %1 不能载入本地证书，%1 Error loading private key, %1 不能载入私有键，%1 No error The issuer certificate could not be found The certificate signature could not be decrypted The public key in the certificate could not be read The signature of the certificate is invalid The certificate is not yet valid The certificate has expired The certificate's notBefore field contains an invalid time The certificate's notAfter field contains an invalid time The certificate is self-signed, and untrusted The root certificate of the certificate chain is self-signed, and untrusted The issuer certificate of a locally looked up certificate could not be found No certificates could be verified One of the CA certificates is invalid The basicConstraints path length parameter has been exceeded The supplied certificate is unsuitable for this purpose The root CA certificate is not trusted for this purpose The root CA certificate is marked to reject the specified purpose The current candidate issuer certificate was rejected because its subject name did not match the issuer name of the current certificate The current candidate issuer certificate was rejected because its issuer name and serial number was present and did not match the authority key identifier of the current certificate The peer did not present any certificate The host name did not match any of the valid hosts for this certificate The peer certificate is blacklisted Unknown error 未知的错误 QStackedWidgetEventFilter Previous Page Next Page Delete Before Current Page After Current Page Change Page Order... Change Page Order Page %1 of %2 Insert Page QStackedWidgetPreviewEventFilter Go to previous page of %1 '%2' (%3/%4). Go to next page of %1 '%2' (%3/%4). QStandardPaths Desktop Documents Fonts 字体 Applications Music 音乐 Movies Pictures Temporary Directory Home Application Data Cache Shared Data Runtime Configuration Shared Configuration Shared Cache Download QStateMachine Missing initial state in compound state '%1' Missing default state in history state '%1' No common ancestor for targets and source of transition from state '%1' Unknown error 未知的错误 QSystemSemaphore %1: out of resources %1：资源耗尽了 %1: permission denied %1：权限被拒绝 %1: already exists %1：已经存在 %1: does not exist %1：不存在 %1: name error %1: unknown error %2 %1：未知错误 %2 QTabBar Scroll Left 向左滚动 Scroll Right 向右滚动 Close 关闭 Activate 激活 Press 按下 Close the tab Activate the tab QTabWidgetEventFilter Delete Before Current Page After Current Page Page %1 of %2 Insert Page QTcpServer Operation on socket is not supported socket操作不被支持 QTextControl &Undo 撤消(&U) &Redo 恢复(&R) Cu&t 剪切(&T) &Copy 复制(&C) Copy &Link Location 复制链接位置(&L) &Paste 粘贴(&P) Delete 删除 Select All 选择全部 QToolBoxHelper Delete Page Before Current Page After Current Page Change Page Order... Change Page Order Page %1 of %2 Insert Page QToolButton Press 按下 Open 打开 QUdpSocket This platform does not support IPv6 这个平台不支持IPv6 QUndoGroup Undo %1 Undo Default text for undo action 撤销 Redo %1 Redo Default text for redo action 恢复 QUndoModel <empty> <空白> QUndoStack Undo %1 Undo Default text for undo action 撤销 Redo %1 Redo Default text for redo action 恢复 QUnicodeControlCharacterMenu LRM Left-to-right mark LRM 从左到右标记 RLM Right-to-left mark RLM 从右向左标记 ZWJ Zero width joiner ZWJ 零宽度连接器 ZWNJ Zero width non-joiner ZWNJ 零宽度非连接器 ZWSP Zero width space ZWSP 零宽度空格 LRE Start of left-to-right embedding LRE 开始从左到右嵌入 RLE Start of right-to-left embedding RLE 开始从右向左嵌入 LRO Start of left-to-right override LRO 开始从左向右覆盖 RLO Start of right-to-left override RLO 开始从右向左覆盖 PDF Pop directional formatting PDF 弹出方向格式 Insert Unicode control character 插入Unicode控制字符 QView3DPlugin 3D View QView3DTool 3DView QWhatsThisAction What's This? 这是什么？ QWidget * * QWizard Go Back 返回 Continue 继续 Commit 提交 Done 完成 Help 帮助 < &Back < 上一步(&B) &Finish 完成(&F) Cancel 取消 &Help 帮助(&H) &Next 下一步(&N) &Next > 下一步(&N) > QWorkspace &Restore 恢复(&R) &Move 移动(&M) &Size 大小(&S) Mi&nimize 最小化(&N) Ma&ximize 最大化(&X) &Close 关闭(&C) Stay on &Top 总在最前(&T) Sh&ade 卷起(&A) %1 - [%2] %1 - [%2] Minimize 最小化 Restore Down 恢复 Close 关闭 &Unshade 展开(&U) QXml no error occurred 没有错误发生 error triggered by consumer 由消费者出发的错误 unexpected end of file 意外的文件终止 more than one document type definition 多于一个的文档类型定义 error occurred while parsing element 在解析元素的时候发生错误 tag mismatch 标记不匹配 error occurred while parsing content 在解析内容的时候发生错误 unexpected character 意外的字符 invalid name for processing instruction 无效的处理指令名称 version expected while reading the XML declaration 在读取XML声明的时候，版本被期待 wrong value for standalone declaration 错误的独立声明的值 encoding declaration or standalone declaration expected while reading the XML declaration 在读取XML声明的时候，编码声明或者独立声明被期待 standalone declaration expected while reading the XML declaration 在读取XML声明的时候，独立声明被期待 error occurred while parsing document type definition 在解析文档类型定义的时候发生错误 letter is expected 字符被期待 error occurred while parsing comment 在解析注释的时候发生错误 error occurred while parsing reference 在解析参考的时候发生错误 internal general entity reference not allowed in DTD 在DTD中不允许使用内部解析的通用实体参考 external parsed general entity reference not allowed in attribute value 在属性值中不允许使用外部解析的通用实体参考 external parsed general entity reference not allowed in DTD 在DTD中不允许使用外部解析的通用实体参考 unparsed entity reference in wrong context 没有解析的错误上下文中的实体参考 recursive entities 嵌套实体 error in the text declaration of an external entity 在一个外部实体的文本声明里有错误 QXmlPatternistCLI Warning in %1, at line %2, column %3: %4 Warning in %1: %2 Unknown location Error %1 in %2, at line %3, column %4: %5 Error %1 in %2: %3 QXmlStream Extra content at end of document. 文档末尾有额外内容。 Invalid entity value. 无效的实体值。 Invalid XML character. 无效的XML字符。 Sequence ']]>' not allowed in content. 内容中不允许有“]]>“序列。 Namespace prefix '%1' not declared 命名空间的”%1“前缀没有被声明 Attribute redefined. 属性重复定义。 Unexpected character '%1' in public id literal. 在公有标识文本中有意外的字符”%1“。 Invalid XML version string. 无效的XML版本字符串。 Unsupported XML version. 不被支持的XML版本。 %1 is an invalid encoding name. %1是无效的编码名称。 Encoding %1 is unsupported 编码%1不被支持。 Standalone accepts only yes or no. 独立运行只允许是或者否。 Invalid attribute in XML declaration. 在XML声明中无效的属性。 Premature end of document. 文档过早的结束。 Invalid document. 无效的文档。 Expected 期待的 , but got ' ，但是得到的是“ Unexpected ' 意外的“ Expected character data. 期待的字符数据。 Recursive entity detected. 检测到嵌套实体。 Start tag expected. 开始期待的标记。 XML declaration not at start of document. XML声明没有在文档的开始位置。 NDATA in parameter entity declaration. 在参数实体声明中有NDATA。 %1 is an invalid processing instruction name. %1 是无效的处理指令名称。 Invalid processing instruction name. 无效的处理指令名称。 Illegal namespace declaration. 非法的命名空间声明。 Invalid XML name. 无效的XML名称。 Opening and ending tag mismatch. 开始标记和结束标记不匹配。 Reference to unparsed entity '%1'. 未解析实体“%1“的引用。 Entity '%1' not declared. 实体”%1“没有被声明。 Reference to external entity '%1' in attribute value. 在属性值中的外部实体“%1”的引用。 Invalid character reference. 无效的字符引用。 Encountered incorrectly encoded content. 遇到不正确的编码内容。 The standalone pseudo attribute must appear after the encoding. 独立运行伪属性必须出现在编码之后。 %1 is an invalid PUBLIC identifier. %1是一个无效的公有(PUBLIC)标识符。 QtResourceEditorDialog Dialog New File N Remove File R I New Resource A Remove Resource or File %1 already exists. Do you want to replace it? %1已经存在。你想要替换它么？ The file does not appear to be a resource file; element '%1' was found where '%2' was expected. %1 [read-only] %1 [missing] <no prefix> New Resource File Resource files (*.qrc) Import Resource File newPrefix Warning: The file%1is outside of the current resource file's parent directory. To resolve the issue, press:<table><tr><th align="left">Copy</th><td>to copy the file to the resource file's parent directory.</td></tr><tr><th align="left">Copy As...</th><td>to copy the file into a subdirectory of the resource file's parent directory.</td></tr><tr><th align="left">Keep</th><td>to use its current location.</td></tr></table> Add Files Incorrect Path Copy 复制 Copy As... Keep Skip Clone Prefix Enter the suffix which you want to add to the names of the cloned files. This could for example be a language extension like "_de". Copy As The selected file:%1is outside of the current resource file's directory:%2Please select another path within this directory. Could not overwrite %1. Could not copy %1 to %2 A parse error occurred at line %1, column %2 of %3: %4 Save Resource File Could not write %1: %2 Edit Resources New... Open... Open Resource File Remove 移除 Move Up Move Down Add Prefix Add Files... Change Prefix Change Language Change Alias Clone Prefix... Prefix / Path Language / Alias <html>Warning: There have been problems while reloading the resources:<pre>%1</pre></html> Resource Warning QtResourceView Size: %1 x %2 %3 Edit Resources... Reload 重新载入 Copy Path QtResourceViewDialog Select Resource QtXmlPatterns An %1-attribute with value %2 has already been declared. 带有值 %2 的 %1 属性已经声明过了。 An %1-attribute must have a valid %2 as value, which %3 isn't. 一个 %1 属性必须带有一个有效的 %2 作为值，但 %3 却不是。 Network timeout. 网络超时。 Element %1 can't be serialized because it appears outside the document element. 元素 %1 不能被串行化，因为它出现在文档元素之外。 Year %1 is invalid because it begins with %2. %1 年是无效的，因为应该从 %2 开始。 Day %1 is outside the range %2..%3. %1 日是在 %2...%3 范围之外的。 Month %1 is outside the range %2..%3. %1 月是在 %2...%3 范围之外的。 Overflow: Can't represent date %1. 溢出：无法呈现数据 %1。 Day %1 is invalid for month %2. %1 日对于 %2 月是无效的。 Time 24:%1:%2.%3 is invalid. Hour is 24, but minutes, seconds, and milliseconds are not all 0; 时间 24:%1:%2.%3 是无效的。小时是 24，但是分钟、秒和毫秒不全为 0； Time %1:%2:%3.%4 is invalid. 时间 %1:%2:%3.%4 是无效的。 Overflow: Date can't be represented. 溢出：数据无法被呈现。 At least one component must be present. 至少有一个组件被呈现。 At least one time component must appear after the %1-delimiter. 至少一个时间组件必须出现在这个 %1 界限之后。 No operand in an integer division, %1, can be %2. 在整数除法中没有操作数，%1，可以是 %2。 The first operand in an integer division, %1, cannot be infinity (%2). 除法中的第一个操作数，%1，不能是无穷(%2)。 The second operand in a division, %1, cannot be zero (%2). 除法中的第二个操作数，%1，不能是零(%2)。 %1 is not a valid value of type %2. %1 不是类型为 %2 的有效值。 When casting to %1 from %2, the source value cannot be %3. 当从 %2 抛出到 %1 时，源值不能是 %3。 Integer division (%1) by zero (%2) is undefined. 整数除法(%1)除零(%2)是未定义的。 Division (%1) by zero (%2) is undefined. 除法(%1)除零(%2)是未定义的。 Modulus division (%1) by zero (%2) is undefined. 求模除法(%1)除零(%2)是未定义的。 Dividing a value of type %1 by %2 (not-a-number) is not allowed. 一个类型为 %1 的值除以 %2(不是一个数值)是不允许的。 Dividing a value of type %1 by %2 or %3 (plus or minus zero) is not allowed. 一个类型为 %1 的值除以 %2 或者 %3(正负零)是不允许的。 Multiplication of a value of type %1 by %2 or %3 (plus or minus infinity) is not allowed. 一个类型为 %1 的值乘以 %2 或者 %3(正负无穷)是不允许的。 A value of type %1 cannot have an Effective Boolean Value. 一个类型为 %1 的值不能是一个有效的布尔值(Effective Boolean Value)。 Effective Boolean Value cannot be calculated for a sequence containing two or more atomic values. 有效的布尔值(Effective Boolean Value)不能被用于计算一个包含两个或者更多原子值的序列。 Value %1 of type %2 exceeds maximum (%3). 类型为 %2 的值 %1 超过了最大值(%3)。 Value %1 of type %2 is below minimum (%3). 类型为 %2 的值 %1 超过了最小值(%3)。 A value of type %1 must contain an even number of digits. The value %2 does not. 类型为 %1 的值必须包含偶数个数字。值 %2 不是这样的。 %1 is not valid as a value of type %2. %1 不是类型为 %2 的有效值。 Operator %1 cannot be used on type %2. 操作符 %1 不能被用于类型 %2。 Operator %1 cannot be used on atomic values of type %2 and %3. 操作符 %1 不能被用于类型为 %2 和 %3 的原子值。 The namespace URI in the name for a computed attribute cannot be %1. 一个被计算的属性的名称中的命名空间 URI 不能是 %1。 The name for a computed attribute cannot have the namespace URI %1 with the local name %2. 一个被计算的属性的名称不能使用带有本地名称 %2 的命名空间 URI %1。 Type error in cast, expected %1, received %2. 抛出类型错误，期望的是 %1，收到的是 %2。 When casting to %1 or types derived from it, the source value must be of the same type, or it must be a string literal. Type %2 is not allowed. 当抛出到 %1 或者它的派生类时，源类型必须是同一类型，或者它必须是一个字符串类型。类型 %2 是不被允许的。 No casting is possible with %1 as the target type. 无法以 %1 为目标类型进行抛出。 It is not possible to cast from %1 to %2. 无法从 %1 抛出到 %2。 Casting to %1 is not possible because it is an abstract type, and can therefore never be instantiated. 无法抛出到 %1，因为它是一个抽象类型，并且因此无法被实例化。 It's not possible to cast the value %1 of type %2 to %3 无法从类型为 %2 的值 %1 抛出到 %3 Failure when casting from %1 to %2: %3 从 %2 抛出到 %1 失败：%3 A comment cannot contain %1 注释不能包含 %1 A comment cannot end with a %1. 注释不能以 %1 结尾。 No comparisons can be done involving the type %1. 对于类型 %1 不能进行比较。 Operator %1 is not available between atomic values of type %2 and %3. 在类型 %2 和 %3 的原子值之间，操作符 %1 是不可用的。 An attribute node cannot be a child of a document node. Therefore, the attribute %1 is out of place. 一个属性节点不能是一个文档节点的子节点。因此，这个属性 %1 所在位置是不合适的。 A library module cannot be evaluated directly. It must be imported from a main module. 一个库模块不能被直接评估。它必须从一个主模块中导入。 No template by name %1 exists. 没有名为 %1 的模板存在。 A value of type %1 cannot be a predicate. A predicate must have either a numeric type or an Effective Boolean Value type. 类型为 %1 的值不能被判断。一个判断必须是数值类型或者一个有效的布尔值(Effective Boolean Value)类型。 A positional predicate must evaluate to a single numeric value. 一个定位判断必须评估一个单一数值。 The target name in a processing instruction cannot be %1 in any combination of upper and lower case. Therefore, %2 is invalid. %1 is not a valid target name in a processing instruction. It must be a %2 value, e.g. %3. %1 不是处理指令的有效目标名称。它必须是值 %2，例如 %3。 The last step in a path must contain either nodes or atomic values. It cannot be a mixture between the two. 一个路径中的最后一步必须包含节点或者原子值。它不能是两者的一个组合。 The data of a processing instruction cannot contain the string %1 处理指令的数据不能包含字符串 %1 No namespace binding exists for the prefix %1 对于前缀 %1，没有存在绑定的命名空间。 No namespace binding exists for the prefix %1 in %2 对于 %2 中的前缀 %1，没有存在绑定的命名空间。 %1 is an invalid %2 %1 是一个无效的 %2。 %1 takes at most %n argument(s). %2 is therefore invalid. %1 最多可以有 %n 个参数。因此 %2 是无效的。 %1 requires at least %n argument(s). %2 is therefore invalid. %1 需要至少 %n 个参数。因此 %2 是无效的。 The first argument to %1 cannot be of type %2. It must be a numeric type, xs:yearMonthDuration or xs:dayTimeDuration. %1 的第一个参数不能是类型 %2 的。它必须是数字类型的，xs:yearMonthDuration 或者 xs:dayTimeDuration。 The first argument to %1 cannot be of type %2. It must be of type %3, %4, or %5. %1 的第一个参数不能是类型 %2 的。它必须是类型 %3、%4 或者 %5 的。 The second argument to %1 cannot be of type %2. It must be of type %3, %4, or %5. %1 的第二个参数不能是类型 %2 的。它必须是类型 %3、%4 或者 %5 的。 %1 is not a valid XML 1.0 character. %1 不是一个有效的 XML 1.0 字符。 The first argument to %1 cannot be of type %2. %1 的第一个参数不能是类型 %2 的。 If both values have zone offsets, they must have the same zone offset. %1 and %2 are not the same. 如果两个值都有区偏移(zone offset)，它们必须拥有相同的区偏移。%1 和 %2 的区偏移是不同的。 %1 was called. %1 被调用了。 %1 must be followed by %2 or %3, not at the end of the replacement string. %1 必须被 %2 或者 %3 跟随，不能在替换字符串的末尾。 In the replacement string, %1 must be followed by at least one digit when not escaped. 在这个替换字符串中，%1 在没有被转义的时候必须被至少一个数字跟随。 In the replacement string, %1 can only be used to escape itself or %2, not %3 在这个替换字符串中，%1 只能被用于转义它本身或者 %2，而不是 %3 %1 matches newline characters %1 匹配了换行符 %1 and %2 match the start and end of a line. %1 和 %2 匹配了一行的头和尾。 Matches are case insensitive 匹配是大小写不敏感的 Whitespace characters are removed, except when they appear in character classes 空白字符被移除了，除非当它们出现在字符类中 %1 is an invalid regular expression pattern: %2 %1 是正则表达式中的一个无效模式：%2 %1 is an invalid flag for regular expressions. Valid flags are: %1 是正则表达式中的一个无效标记。有效标记为： If the first argument is the empty sequence or a zero-length string (no namespace), a prefix cannot be specified. Prefix %1 was specified. 如果第一个参数是空序列或者零长度字符串(无命名空间)，那么就不能指定前缀。前缀 %1 被指定了。 It will not be possible to retrieve %1. 将不能获取 %1。 The root node of the second argument to function %1 must be a document node. %2 is not a document node. 函数 %1 的第二个参数的根节点必须是一个文档节点。%2 不是一个文档节点。 The default collection is undefined 默认收集(collection)是未定义的 %1 cannot be retrieved 无法获取 %1 The normalization form %1 is unsupported. The supported forms are %2, %3, %4, and %5, and none, i.e. the empty string (no normalization). 不支持正规化(normalization)表单 %1。被支持的表单是 %2、%3、%4 和 %5，以及无，例如空字符串(无正规化)。 A zone offset must be in the range %1..%2 inclusive. %3 is out of range. 区偏移(zone offset)必须在 %1...%2 范围之内。%3 是在范围之外的。 %1 is not a whole number of minutes. %1 不是分钟的整数。 Required cardinality is %1; got cardinality %2. 所需要的表间关系是 %1；得到的表间关系却是 %2。 The item %1 did not match the required type %2. 项 %1 和所需的类型 %2 不匹配。 %1 is an unknown schema type. %1 是一个未知的方案类型。 Only one %1 declaration can occur in the query prolog. 只有一个 %1 的声明可以出现在查询序言中。 The initialization of variable %1 depends on itself 变量 %1 的初始化依赖于它本身 The variable %1 is unused 变量 %1 没有被使用 Version %1 is not supported. The supported XQuery version is 1.0. 不支持版本 %1。被支持的 XQuery 版本是 1.0。 The encoding %1 is invalid. It must contain Latin characters only, must not contain whitespace, and must match the regular expression %2. 编码方式 %1 是无效的。它必须只包含拉丁字符，必须不包含空白符号，并且必须和正则表达式 %2 匹配。 No function with signature %1 is available 没有签名为 %1 的可用函数。 A default namespace declaration must occur before function, variable, and option declarations. 默认命名空间声明必须出现在函数、变量和选项声明之前。 Namespace declarations must occur before function, variable, and option declarations. 命名空间声明必须出现在函数、变量和选项声明之前。 Module imports must occur before function, variable, and option declarations. 模块导入不能出现在函数、变量和选项声明之前。 It is not possible to redeclare prefix %1. 不能重复声明前缀 %1。 Prefix %1 is already declared in the prolog. 前缀 %1 在序言中已经声明过了。 The name of an option must have a prefix. There is no default namespace for options. 一个选项的名称必须带有前缀。对于选项没有默认命名空间。 The Schema Import feature is not supported, and therefore %1 declarations cannot occur. 不支持方案导入(Schema Import)特性，并且因此 %1 声明不能出现。 The target namespace of a %1 cannot be empty. %1 的目标命名空间不能为空。 The module import feature is not supported 不支持模块导入特性 The keyword %1 cannot occur with any other mode name. 任何其他模式名称不能出现关键字%1。 A stylesheet function must have a prefixed name. 样式表函数必须有一个前缀名。 The namespace %1 is reserved; therefore user defined functions may not use it. Try the predefined prefix %2, which exists for these cases. 命名空间 %1 是保留的；因此用户定义的函数不能使用它。请试试预定义的前缀 %2，它就是用于这种情况的。 The namespace of a user defined function in a library module must be equivalent to the module namespace. In other words, it should be %1 instead of %2 用户在一个库模块中定义的函数的命名空间必须和这个模块的命名空间一致。也就是说，它应该是 %1，而不是 %2 A function already exists with the signature %1. 一个带有签名 %1 的函数已经存在。 No external functions are supported. All supported functions can be used directly, without first declaring them as external 不支持外部函数。所有支持的函数必须可以被直接使用，不能把它们声明为外部的 W3C XML Schema identity constraint selector W3C XML Schema identity constraint field A construct was encountered which is disallowed in the current language(%1). A template with name %1 has already been declared. No variable with name %1 exists The value of attribute %1 must be of type %2, which %3 isn't. The prefix %1 cannot be bound. By default, it is already bound to the namespace %2. A variable with name %1 has already been declared. No value is available for the external variable with name %1. The namespace for a user defined function cannot be empty (try the predefined prefix %1, which exists for cases like this) An argument with name %1 has already been declared. Every argument name must be unique. When function %1 is used for matching inside a pattern, the argument must be a variable reference or a string literal. 当函数%1被用于样式匹配时，参数必须是变量参考或者字符串。 In an XSL-T pattern, the first argument to function %1 must be a string literal, when used for matching. 在XSL-T样式中，函数%1的第一个参数必须是字符串，以便用于匹配。 In an XSL-T pattern, the first argument to function %1 must be a literal or a variable reference, when used for matching. 在XSL-T样式中，函数%1的第一个参数必须是文字或者变量参考，以便用于匹配。 In an XSL-T pattern, function %1 cannot have a third argument. 在XSL-T样式中，函数%1不能有第三个参数。 In an XSL-T pattern, only function %1 and %2, not %3, can be used for matching. 在XSL-T样式中，只用函数%1和%2可以用于匹配，%3不可以。 In an XSL-T pattern, axis %1 cannot be used, only axis %2 or %3 can. 在XSL-T仰视中，不能使用%1轴，只能使用%2轴或者%3轴。 %1 is an invalid template mode name. %1不是一个合法的模板模式名称。 The name of a variable bound in a for-expression must be different from the positional variable. Hence, the two variables named %1 collide. 一个在 for 表达式中绑定的变量的名称必须和这个定位变量不同。因此，这两个名称为 %1 的变量冲突。 The Schema Validation Feature is not supported. Hence, %1-expressions may not be used. 不支持方案验证特性(Schema Validation Feature)。因此，也许不能使用 %1 表达式。 None of the pragma expressions are supported. Therefore, a fallback expression must be present 不支持任何编译指示表达式(pragma expression)。因此，必须呈现一个回调表达式(fallback expression)。 Each name of a template parameter must be unique; %1 is duplicated. 每一个模板参数的名称都必须是唯一的；%1是重复的。 The %1-axis is unsupported in XQuery 这个 %1 轴在 XQuery 中是不被支持的。 No function with name %1 is available. An attribute with name %1 has already appeared on this element. %1 is not a valid name for a processing-instruction. %1不是一个处理指令的合法名称。 %1 is not a valid numeric literal. %1 不是一个有效的数字语义。 The namespace URI cannot be the empty string when binding to a prefix, %1. 当这个命名空间 URI 被绑定到一个前缀 %1 时，它不能是空字符串。 %1 is an invalid namespace URI. %1 是一个无效的命名空间 URI。 It is not possible to bind to the prefix %1 无法绑定到这个前缀 %1。 Namespace %1 can only be bound to %2 (and it is, in either case, pre-declared). 命名空间 %1 只能和 %2 绑定(并且如果是这种情况，需要提前声明)。 Prefix %1 can only be bound to %2 (and it is, in either case, pre-declared). 前缀 %1 只能和 %2 绑定(并且如果是这种情况，需要提前声明)。 Two namespace declaration attributes have the same name: %1. 两个命名空间声明属性使用了相同的名称：%1。 The namespace URI must be a constant and cannot use enclosed expressions. 命名空间 URI 必须是一个常量并且不能使用封闭的表达式。 A direct element constructor is not well-formed. %1 is ended with %2. 一个直接元素构造器没有很好地形成。%1 后面跟着 %2。 The name %1 does not refer to any schema type. 名称 %1 没有指向任何方案类型。 %1 is an complex type. Casting to complex types is not possible. However, casting to atomic types such as %2 works. %1 是一个复杂类型。无法抛出到复杂类型。因此，抛出到例如 %2 这样的原子类型是可以的。 %1 is not an atomic type. Casting is only possible to atomic types. %1 不是原子类型。只能抛出到原子类型。 %1 is not in the in-scope attribute declarations. Note that the schema import feature is not supported. %1 不是范围内属性声明。注意方案导入特性是不被支持的。 The name of an extension expression must be in a namespace. 一个扩展表达式的名称必须在一个命名空间中。 empty 空白 zero or one 零或者一 exactly one 确切地一 one or more 一或者更多 zero or more 零或者更多 Required type is %1, but %2 was found. 需要的类型是 %1，但是找到的是 %2。 Promoting %1 to %2 may cause loss of precision. 把 %1 升级为 %2 会导致精度的损失。 The focus is undefined. 焦点未定义。 It's not possible to add attributes after any other kind of node. 不能在任何其它类型节点后添加属性。 An attribute by name %1 has already been created. 一个名称为 %1 的属性已经被创建。 Only the Unicode Codepoint Collation is supported(%1). %2 is unsupported. 只支持 Unicode 代码点校验(Unicode Codepoint Collation)(%1)。%2 是不被支持的。 Attribute %1 can't be serialized because it appears at the top level. 属性 %1 不能被串行化，因为它出现在最顶层。 %1 is an unsupported encoding. %1 是不被支持的编码。 %1 contains octets which are disallowed in the requested encoding %2. %1包含了在请求编码%2中不允许的八进位值。 The codepoint %1, occurring in %2 using encoding %3, is an invalid XML character. 在使用编码%3的%2中出现的代码点%1不是一个有效的XML字符。 Ambiguous rule match. 含糊规则匹配。 In a namespace constructor, the value for a namespace cannot be an empty string. The prefix must be a valid %1, which %2 is not. 前缀必须是有效的%1，而%2不是。 The prefix %1 cannot be bound. 前缀%1不能被绑定。 Only the prefix %1 can be bound to %2 and vice versa. 只有前缀%1可以绑定到%2，反之也一样 Circularity detected 检测到环 The parameter %1 is required, but no corresponding %2 is supplied. 需要参数%1，但是没有提供对应的%2。 The parameter %1 is passed, but no corresponding %2 exists. 参数%1已传递，但没有相应的%2存在。 The URI cannot have a fragment URI不能有片段 Element %1 is not allowed at this location. 元素%1不能在这个位置。 Text nodes are not allowed at this location. 文本节点不能在这个位置。 Parse error: %1 解析错误：%1 The value of the XSL-T version attribute must be a value of type %1, which %2 isn't. XSL-T版本属性的值必须是%1类型的值，而%2不是。 Running an XSL-T 1.0 stylesheet with a 2.0 processor. 在XSL-T 2.0处理器中运行一个1.0的样式表。 Unknown XSL-T attribute %1. 未知的XSL-T属性%1。 Attribute %1 and %2 are mutually exclusive. 属性%1和%2彼此互斥。 In a simplified stylesheet module, attribute %1 must be present. 在一个简化样式表模块中，属性%1必须存在。 If element %1 has no attribute %2, it cannot have attribute %3 or %4. 如果元素%1没有属性%2，那么它也不能有属性%3或者%4。 Element %1 must have at least one of the attributes %2 or %3. 元素%1必须至少有属性%2或者%3其中一个。 At least one mode must be specified in the %1-attribute on element %2. 在元素%2的%1属性中至少要指定一个模式。 Attribute %1 cannot appear on the element %2. Only the standard attributes can appear. 属性%1不能出现在元素%2上。只有标准属性可以出现。 Attribute %1 cannot appear on the element %2. Only %3 is allowed, and the standard attributes. 属性%1不能出现在元素%2上。只有%3和标准属性是允许的。 Attribute %1 cannot appear on the element %2. Allowed is %3, %4, and the standard attributes. 属性%1不能出现在元素%2上。只有%3、%4和标准属性是允许的。 Attribute %1 cannot appear on the element %2. Allowed is %3, and the standard attributes. 属性%1不能出现在元素%2上。只有%3和标准属性是允许的。 XSL-T attributes on XSL-T elements must be in the null namespace, not in the XSL-T namespace which %1 is. XSL-T元素中的XSL-T属性必须放在空(null)命名空间中，而不是在XSL-T命名空间中，%1却是这个样子。 The attribute %1 must appear on element %2. 属性%1必须出现在元素%2中。 The element with local name %1 does not exist in XSL-T. 有本地名称%1的元素在XSL-T中不存在。 Element %1 must come last. 元素%1必须最后出现。 At least one %1-element must occur before %2. 至少一个元素%1要出现在%2之前。 Only one %1-element can appear. 只能出现一个元素%1。 At least one %1-element must occur inside %2. 至少一个元素%1要出现在%2之内。 When attribute %1 is present on %2, a sequence constructor cannot be used. 当属性%1出现在%2中时，不能使用顺序构造。 Element %1 must have either a %2-attribute or a sequence constructor. 元素%1必须有在一个%2属性或者顺序构造。 When a parameter is required, a default value cannot be supplied through a %1-attribute or a sequence constructor. 当需要参数时，不能通过属性%1或者顺序构造提供默认值。 Element %1 cannot have children. 元素%1不能有子元素。 Element %1 cannot have a sequence constructor. 元素%1不能有顺序构造。 The attribute %1 cannot appear on %2, when it is a child of %3. 属性%1不能出现在%2中，因为它是%3的子元素。 A parameter in a function cannot be declared to be a tunnel. 函数内的参数不能被声明为通道(tunnel)。 This processor is not Schema-aware and therefore %1 cannot be used. 这个处理器不能感知Schema，因此%1不能被使用。 Top level stylesheet elements must be in a non-null namespace, which %1 isn't. 顶级样式表元素必须是在非空命名空间中的，而%1不是。 The value for attribute %1 on element %2 must either be %3 or %4, not %5. 元素%2中属性%1的值必须是%3或者%4，而不是%5。 Attribute %1 cannot have the value %2. 属性%1的值不能是%2。 The attribute %1 can only appear on the first %2 element. 属性%1只能出现在前%2个元素中。 At least one %1 element must appear as child of %2. %2必须至少又一个子元素%1。 Empty particle cannot be derived from non-empty particle. Derived particle is missing element %1. Derived element %1 is missing value constraint as defined in base particle. Derived element %1 has weaker value constraint than base particle. Fixed value constraint of element %1 differs from value constraint in base particle. Derived element %1 cannot be nillable as base element is not nillable. Block constraints of derived element %1 must not be more weaker than in the base element. Simple type of derived element %1 cannot be validly derived from base element. Complex type of derived element %1 cannot be validly derived from base element. Element %1 is missing in derived particle. Element %1 does not match namespace constraint of wildcard in base particle. Wildcard in derived particle is not a valid subset of wildcard in base particle. processContent of wildcard in derived particle is weaker than wildcard in base particle. Derived particle allows content that is not allowed in the base particle. Base attribute %1 is required but derived attribute is not. Type of derived attribute %1 cannot be validly derived from type of base attribute. Value constraint of derived attribute %1 does not match value constraint of base attribute. Derived attribute %1 does not exist in the base definition. Derived attribute %1 does not match the wildcard in the base definition. Base attribute %1 is required but missing in derived definition. Derived definition contains an %1 element that does not exists in the base definition Derived wildcard is not a subset of the base wildcard. %1 of derived wildcard is not a valid restriction of %2 of base wildcard Attribute %1 from base type is missing in derived type. Type of derived attribute %1 differs from type of base attribute. Base definition contains an %1 element that is missing in the derived definition %1 has inheritance loop in its base type %2. Circular inheritance of base type %1. Circular inheritance of union %1. %1 is not allowed to derive from %2 by restriction as the latter defines it as final. %1 is not allowed to derive from %2 by extension as the latter defines it as final. Base type of simple type %1 cannot be complex type %2. Simple type %1 cannot have direct base type %2. Simple type %1 is not allowed to have base type %2. Simple type %1 can only have simple atomic type as base type. Simple type %1 cannot derive from %2 as the latter defines restriction as final. Variety of item type of %1 must be either atomic or union. Variety of member types of %1 must be atomic. %1 is not allowed to derive from %2 by list as the latter defines it as final. Simple type %1 is only allowed to have %2 facet. Base type of simple type %1 must have variety of type list. Base type of simple type %1 has defined derivation by restriction as final. Item type of base type does not match item type of %1. Simple type %1 contains not allowed facet type %2. %1 is not allowed to derive from %2 by union as the latter defines it as final. %1 is not allowed to have any facets. Base type %1 of simple type %2 must have variety of union. Base type %1 of simple type %2 is not allowed to have restriction in %3 attribute. Member type %1 cannot be derived from member type %2 of %3's base type %4. Derivation method of %1 must be extension because the base type %2 is a simple type. Complex type %1 has duplicated element %2 in its content model. Complex type %1 has non-deterministic content. Attributes of complex type %1 are not a valid extension of the attributes of base type %2: %3. Content model of complex type %1 is not a valid extension of content model of %2. Complex type %1 must have simple content. Complex type %1 must have the same simple type as its base class %2. Complex type %1 cannot be derived from base type %2%3. Attributes of complex type %1 are not a valid restriction from the attributes of base type %2: %3. Complex type %1 with simple content cannot be derived from complex base type %2. Item type of simple type %1 cannot be a complex type. Member type of simple type %1 cannot be a complex type. %1 is not allowed to have a member type with the same name as itself. %1 facet collides with %2 facet. %1 facet must have the same value as %2 facet of base type. %1 facet must be equal or greater than %2 facet of base type. %1 facet must be less than or equal to %2 facet of base type. %1 facet contains invalid regular expression Unknown notation %1 used in %2 facet. %1 facet contains invalid value %2: %3. %1 facet cannot be %2 or %3 if %4 facet of base type is %5. %1 facet cannot be %2 if %3 facet of base type is %4. %1 facet must be less than or equal to %2 facet. %1 facet must be less than %2 facet of base type. %1 facet and %2 facet cannot appear together. %1 facet must be greater than %2 facet of base type. %1 facet must be less than %2 facet. %1 facet must be greater than or equal to %2 facet of base type. Simple type contains not allowed facet %1. %1, %2, %3, %4, %5 and %6 facets are not allowed when derived by list. Only %1 and %2 facets are allowed when derived by union. %1 contains %2 facet with invalid data: %3. Attribute group %1 contains attribute %2 twice. Attribute group %1 contains two different attributes that both have types derived from %2. Attribute group %1 contains attribute %2 that has value constraint but type that inherits from %3. Complex type %1 contains attribute %2 twice. Complex type %1 contains two different attributes that both have types derived from %2. Complex type %1 contains attribute %2 that has value constraint but type that inherits from %3. Element %1 is not allowed to have a value constraint if its base type is complex. Element %1 is not allowed to have a value constraint if its type is derived from %2. Value constraint of element %1 is not of elements type: %2. Element %1 is not allowed to have substitution group affiliation as it is no global element. Type of element %1 cannot be derived from type of substitution group affiliation. Value constraint of attribute %1 is not of attributes type: %2. Attribute %1 has value constraint but has type derived from %2. %1 attribute in derived complex type must be %2 like in base type. Attribute %1 in derived complex type must have %2 value constraint like in base type. Attribute %1 in derived complex type must have the same %2 value constraint like in base type. Attribute %1 in derived complex type must have %2 value constraint. processContent of base wildcard must be weaker than derived wildcard. Element %1 exists twice with different types. Particle contains non-deterministic wildcards. Element %1 is missing child element. There is one IDREF value with no corresponding ID: %1. Loaded schema file is invalid. %1 contains invalid data. xsi:schemaLocation namespace %1 has already appeared earlier in the instance document. xsi:noNamespaceSchemaLocation cannot appear after the first no-namespace element or attribute. No schema defined for validation. No definition for element %1 available. Specified type %1 is not known to the schema. Element %1 is not defined in this scope. Declaration for element %1 does not exist. Element %1 contains invalid content. Element %1 is declared as abstract. Element %1 is not nillable. Attribute %1 contains invalid data: %2 Element contains content although it is nillable. Fixed value constraint not allowed if element is nillable. Specified type %1 is not validly substitutable with element type %2. Complex type %1 is not allowed to be abstract. Element %1 contains not allowed attributes. Element %1 contains not allowed child element. Content of element %1 does not match its type definition: %2. Content of element %1 does not match defined value constraint. Element %1 contains not allowed child content. Element %1 contains not allowed text content. Element %1 cannot contain other elements, as it has fixed content. Element %1 is missing required attribute %2. Attribute %1 does not match the attribute wildcard. Declaration for attribute %1 does not exist. Element %1 contains two attributes of type %2. Attribute %1 contains invalid content. Element %1 contains unknown attribute %2. Content of attribute %1 does not match its type definition: %2. Content of attribute %1 does not match defined value constraint. Non-unique value found for constraint %1. Key constraint %1 contains absent fields. Key constraint %1 contains references nillable element %2. No referenced value found for key reference %1. More than one value found for field %1. Field %1 has no simple type. ID value '%1' is not unique. '%1' attribute contains invalid QName content: %2. %1 references unknown %2 or %3 element %4. %1 references identity constraint %2 that is no %3 or %4 element. %1 has a different number of fields from the identity constraint %2 that it references. Base type %1 of %2 element cannot be resolved. Item type %1 of %2 element cannot be resolved. Member type %1 of %2 element cannot be resolved. Type %1 of %2 element cannot be resolved. Base type %1 of complex type cannot be resolved. %1 cannot have complex base type that has a %2. Content model of complex type %1 contains %2 element, so it cannot be derived by extension from a non-empty type. Complex type %1 cannot be derived by extension from %2 as the latter contains %3 element in its content model. Type of %1 element must be a simple type, %2 is not. Substitution group %1 of %2 element cannot be resolved. Substitution group %1 has circular definition. Duplicated element names %1 in %2 element. Reference %1 of %2 element cannot be resolved. Circular group reference for %1. %1 element is not allowed in this scope %1 element cannot have %2 attribute with value other than %3. %1 element cannot have %2 attribute with value other than %3 or %4. %1 or %2 attribute of reference %3 does not match with the attribute declaration %4. Attribute group %1 has circular reference. %1 attribute in %2 must have %3 use like in base type %4. Attribute wildcard of %1 is not a valid restriction of attribute wildcard of base type %2. %1 has attribute wildcard but its base type %2 has not. Union of attribute wildcard of type %1 and attribute wildcard of its base type %2 is not expressible. Enumeration facet contains invalid content: {%1} is not a value of type %2. Namespace prefix of qualified name %1 is not defined. %1 element %2 is not a valid restriction of the %3 element it redefines: %4. %1 is not valid according to %2. String content does not match the length facet. String content does not match the minLength facet. String content does not match the maxLength facet. String content does not match pattern facet. String content is not listed in the enumeration facet. Signed integer content does not match the maxInclusive facet. Signed integer content does not match the maxExclusive facet. Signed integer content does not match the minInclusive facet. Signed integer content does not match the minExclusive facet. Signed integer content is not listed in the enumeration facet. Signed integer content does not match pattern facet. Signed integer content does not match in the totalDigits facet. Unsigned integer content does not match the maxInclusive facet. Unsigned integer content does not match the maxExclusive facet. Unsigned integer content does not match the minInclusive facet. Unsigned integer content does not match the minExclusive facet. Unsigned integer content is not listed in the enumeration facet. Unsigned integer content does not match pattern facet. Unsigned integer content does not match in the totalDigits facet. Double content does not match the maxInclusive facet. Double content does not match the maxExclusive facet. Double content does not match the minInclusive facet. Double content does not match the minExclusive facet. Double content is not listed in the enumeration facet. Double content does not match pattern facet. Decimal content does not match in the fractionDigits facet. Decimal content does not match in the totalDigits facet. Date time content does not match the maxInclusive facet. Date time content does not match the maxExclusive facet. Date time content does not match the minInclusive facet. Date time content does not match the minExclusive facet. Date time content is not listed in the enumeration facet. Date time content does not match pattern facet. Duration content does not match the maxInclusive facet. Duration content does not match the maxExclusive facet. Duration content does not match the minInclusive facet. Duration content does not match the minExclusive facet. Duration content is not listed in the enumeration facet. Duration content does not match pattern facet. Boolean content does not match pattern facet. Binary content does not match the length facet. Binary content does not match the minLength facet. Binary content does not match the maxLength facet. Binary content is not listed in the enumeration facet. Invalid QName content: %1. QName content is not listed in the enumeration facet. QName content does not match pattern facet. Notation content is not listed in the enumeration facet. List content does not match length facet. List content does not match minLength facet. List content does not match maxLength facet. List content is not listed in the enumeration facet. List content does not match pattern facet. Union content is not listed in the enumeration facet. Union content does not match pattern facet. Data of type %1 are not allowed to be empty. Can not process unknown element %1, expected elements are: %2. Element %1 is not allowed in this scope, possible elements are: %2. Child element is missing in that scope, possible child elements are: %1. Document is not a XML schema. %1 attribute of %2 element contains invalid content: {%3} is not a value of type %4. %1 attribute of %2 element contains invalid content: {%3}. Target namespace %1 of included schema is different from the target namespace %2 as defined by the including schema. Target namespace %1 of imported schema is different from the target namespace %2 as defined by the importing schema. %1 element is not allowed to have the same %2 attribute value as the target namespace %3. %1 element without %2 attribute is not allowed inside schema without target namespace. %1 element is not allowed inside %2 element if %3 attribute is present. %1 element has neither %2 attribute nor %3 child element. %1 element with %2 child element must not have a %3 attribute. %1 attribute of %2 element must be %3 or %4. %1 attribute of %2 element must have a value of %3. %1 attribute of %2 element must have a value of %3 or %4. %1 element must not have %2 and %3 attribute together. Content of %1 attribute of %2 element must not be from namespace %3. %1 attribute of %2 element must not be %3. %1 attribute of %2 element must have the value %3 because the %4 attribute is set. Specifying use='prohibited' inside an attribute group has no effect. %1 element must have either %2 or %3 attribute. %1 element must have either %2 attribute or %3 or %4 as child element. %1 element requires either %2 or %3 attribute. Text or entity references not allowed inside %1 element %1 attribute of %2 element must contain %3, %4 or a list of URIs. %1 element is not allowed in this context. %1 attribute of %2 element has larger value than %3 attribute. Prefix of qualified name %1 is not defined. %1 attribute of %2 element must either contain %3 or the other values. Component with ID %1 has been defined previously. Element %1 already defined. Attribute %1 already defined. Type %1 already defined. Attribute group %1 already defined. Element group %1 already defined. Notation %1 already defined. Identity constraint %1 already defined. Duplicated facets in simple type %1. ScriptErrorDialog An error occurred while running the scripts for "%1": SelectSignalDialog Go to slot Select signal signal class SignalSlotConnection SENDER(%1), SIGNAL(%2), RECEIVER(%3), SLOT(%4) SignalSlotDialogClass Signals and slots Slots Add ... Delete Signals Spacer Horizontal Spacer '%1', %2 x %3 Vertical Spacer '%1', %2 x %3 TemplateOptionsPage Template Paths Tab in preferences dialog WidgetDataBase The file contains a custom widget '%1' whose base class (%2) differs from the current entry in the widget database (%3). The widget database is left unchanged. qdesigner_internal::ActionEditor New... Edit... Go to slot... Copy 复制 Cut 剪切 Paste 粘贴 Select all Delete Actions Configure Action Editor Icon View Detailed View New action Edit action Remove action '%1' Remove actions Used In qdesigner_internal::ActionModel Name 名称 Used Text Shortcut Checkable ToolTip qdesigner_internal::BrushManagerProxy The element '%1' is missing the required attribute '%2'. Empty brush name encountered. An unexpected element '%1' was encountered. An error occurred when reading the brush definition file '%1' at line line %2, column %3: %4 An error occurred when reading the resource file '%1' at line %2, column %3: %4 qdesigner_internal::BuddyEditor Add buddy Remove buddies Remove %n buddies Add %n buddies Set automatically qdesigner_internal::BuddyEditorPlugin Edit Buddies qdesigner_internal::BuddyEditorTool Edit Buddies qdesigner_internal::ButtonGroupMenu Select members Break qdesigner_internal::ButtonTaskMenu Assign to button group Button group New button group Change text... None Button group '%1' qdesigner_internal::CodeDialog Save... Copy All &Find in Text... A temporary form file could not be created in %1. The temporary form file %1 could not be written. %1 - [Code] Save Code Header Files (*.%1) The file %1 could not be opened: %2 The file %1 could not be written: %2 %1 - Error qdesigner_internal::ColorAction Text Color qdesigner_internal::ComboBoxTaskMenu Edit Items... Change Combobox Contents qdesigner_internal::CommandLinkButtonTaskMenu Change description... qdesigner_internal::ConnectionEdit Select All 选择全部 Deselect All Delete qdesigner_internal::ConnectionModel Sender Signal Receiver Slot <sender> <signal> <receiver> <slot> The connection already exists! %1 Signal and Slot Editor qdesigner_internal::ContainerWidgetTaskMenu Delete Insert Insert Insert Page Before Current Page Insert Page After Current Page Add Subwindow Subwindow Page Page %1 of %2 qdesigner_internal::DPI_Chooser System (%1 x %2) System resolution User defined x DPI X/Y separator qdesigner_internal::DesignerPropertyManager AlignLeft AlignHCenter AlignRight AlignJustify AlignTop AlignVCenter AlignBottom %1, %2 Customized (%n roles) Inherited [Theme] %1 Horizontal Vertical Theme Normal Off Normal On Disabled Off Disabled On Active Off Active On Selected Off Selected On translatable disambiguation comment qdesigner_internal::DeviceProfileDialog Device Profiles (*.%1) Default Save Profile Save Profile - Error Unable to open the file '%1' for writing: %2 Open profile Open Profile - Error Unable to open the file '%1' for reading: %2 '%1' is not a valid profile: %2 qdesigner_internal::Dialog Dialog StringList New String &New Delete String &Delete 删除(&D) &Value: Move String Up Up Up Move String Down Down Down qdesigner_internal::EmbeddedOptionsControl None Add a profile Edit the selected profile Delete the selected profile Add Profile New profile Edit Profile Delete Profile Would you like to delete the profile '%1'? Default qdesigner_internal::FilterWidget Filter Clear text qdesigner_internal::FormEditor Resource File Changed The file "%1" has changed outside Designer. Do you want to reload it? qdesigner_internal::FormLayoutMenu Add form layout row... qdesigner_internal::FormWindow Edit contents F2 Insert widget '%1' Resize Key Resize Key Move Paste %n action(s) Paste %n widget(s) Paste (%1 widgets, %2 actions) Cannot paste widgets. Designer could not find a container without a layout to paste into. Break the layout of the container you want to paste into, select this container and then paste again. Paste error Raise widgets Lower widgets Select Ancestor Lay out Drop widget A QMainWindow-based form does not contain a central widget. qdesigner_internal::FormWindowBase Delete '%1' Delete qdesigner_internal::FormWindowManager Cu&t 剪切(&T) Cuts the selected widgets and puts them on the clipboard &Copy 复制(&C) Copies the selected widgets to the clipboard &Paste 粘贴(&P) Pastes the clipboard's contents &Delete 删除(&D) Deletes the selected widgets Select &All Selects all widgets Bring to &Front Raises the selected widgets Send to &Back Lowers the selected widgets Adjust &Size Adjusts the size of the selected widget Lay Out &Horizontally Lays out the selected widgets horizontally Lay Out &Vertically Lays out the selected widgets vertically Lay Out in a &Form Layout Lays out the selected widgets in a form layout Lay Out in a &Grid Lays out the selected widgets in a grid Lay Out Horizontally in S&plitter Lays out the selected widgets horizontally in a splitter Lay Out Vertically in Sp&litter Lays out the selected widgets vertically in a splitter &Break Layout Breaks the selected layout Si&mplify Grid Layout Removes empty columns and rows &Preview... Preview current form Form &Settings... Break Layout Adjust Size Could not create form preview Title of warning message box Form Settings - %1 qdesigner_internal::FormWindowSettings None Device Profile: %1 qdesigner_internal::GridPanel Form Grid Visible Grid &X Snap Reset 重置 Grid &Y qdesigner_internal::GroupBoxTaskMenu Change title... qdesigner_internal::HtmlTextEdit Insert HTML entity qdesigner_internal::IconSelector The pixmap file '%1' cannot be read. The file '%1' does not appear to be a valid pixmap file: %2 The file '%1' could not be read: %2 Choose a Pixmap Pixmap Read Error ... Normal Off Normal On Disabled Off Disabled On Active Off Active On Selected Off Selected On Choose Resource... Choose File... Reset 重置 Reset All qdesigner_internal::IconThemeDialog Set Icon From Theme Input icon name from the current theme: qdesigner_internal::ItemListEditor Items List New Item &New Delete Item &Delete 删除(&D) Move Item Up U Move Item Down D Properties &>> Properties &<< qdesigner_internal::LabelTaskMenu Change rich text... Change plain text... qdesigner_internal::LanguageResourceDialog Choose Resource qdesigner_internal::LineEditTaskMenu Change text... qdesigner_internal::ListWidgetEditor New Item Edit List Widget Edit Combobox qdesigner_internal::ListWidgetTaskMenu Edit Items... Change List Contents qdesigner_internal::MdiContainerWidgetTaskMenu Next Subwindow Previous Subwindow Tile Cascade qdesigner_internal::MenuTaskMenu Remove 移除 qdesigner_internal::MorphMenu Morph into qdesigner_internal::NewActionDialog New Action... &Text: Object &name: T&oolTip: ... Icon th&eme: &Icon: &Checkable: &Shortcut: qdesigner_internal::NewDynamicPropertyDialog Create Dynamic Property Property Name horizontalSpacer Property Type Set Property Name The current object already has a property named '%1'. Please select another, unique one. The '_q_' prefix is reserved for the Qt library. Please select another name. qdesigner_internal::NewFormWidget 0 Choose a template for a preview Embedded Design Device: Screen Size: Default size QVGA portrait (240x320) QVGA landscape (320x240) VGA portrait (480x640) VGA landscape (640x480) Widgets New Form Dialog Categories Custom Widgets None Error loading form Unable to open the form template file '%1': %2 Internal error: No template selected. qdesigner_internal::NewPromotedClassPanel Add New Promoted Class Base class name: Promoted class name: Header file: Global include Reset 重置 qdesigner_internal::ObjectInspector Change Current Page &Find in Text... qdesigner_internal::OrderDialog Change Page Order Page Order Move page up Move page down Index %1 (%2) %1 %2 %1% {1 %2?} qdesigner_internal::PaletteEditor Edit Palette Tune Palette Show Details Compute Details Quick Preview Disabled Inactive Active qdesigner_internal::PaletteEditorButton Change Palette qdesigner_internal::PaletteModel Color Role Active Inactive Disabled qdesigner_internal::PixmapEditor Choose Resource... Choose File... Set Icon From Theme... Copy Path Paste Path ... [Theme] %1 qdesigner_internal::PlainTextEditorDialog Edit text qdesigner_internal::PluginDialog Components Plugin Information Refresh 刷新 Scan for newly installed custom widget plugins. Loaded Plugins Failed Plugins Qt Designer couldn't find any plugins Qt Designer found the following plugins New custom widget plugins have been found. qdesigner_internal::PreviewActionGroup %1 Style qdesigner_internal::PreviewConfigurationWidget Default None Browse... Load Custom Device Skin All QVFB Skins (*.%1) %1 - Duplicate Skin The skin '%1' already exists. %1 - Error %1 is not a valid skin directory: %2 qdesigner_internal::PreviewDeviceSkin &Portrait Landscape (&CCW) Rotate form preview counter-clockwise &Landscape (CW) Rotate form preview clockwise &Close 关闭(&C) qdesigner_internal::PreviewManager %1 - [Preview] qdesigner_internal::PreviewMdiArea The moose in the noose ate the goose who was loose. Palette editor background qdesigner_internal::PreviewWidget Preview Window LineEdit ComboBox PushButton ButtonGroup2 CheckBox1 CheckBox2 ButtonGroup RadioButton1 RadioButton2 RadioButton3 qdesigner_internal::PromotionModel Name 名称 Header file Global include Usage qdesigner_internal::PromotionTaskMenu Promoted widgets... Promote to ... Change signals/slots... Promote to Demote to %1 qdesigner_internal::PropertyEditor Add Dynamic Property... Remove Dynamic Property Sorting Color Groups Tree View Drop Down Button View String... Bool... Other... Configure Property Editor Object: %1 Class: %2 qdesigner_internal::PropertyLineEdit Insert line break qdesigner_internal::QDesignerPromotionDialog Promoted Widgets Promoted Classes Promote Change signals/slots... %1 - Error qdesigner_internal::QDesignerResource Loading qrc file The specified qrc file %1could not be found. Do you want to update the file location? New location for %1 Resource files (*.qrc) qdesigner_internal::QDesignerTaskMenu Layout Alignment No Horizontal Alignment Left Left Center Horizontally Right Right No Vertical Alignment Top 顶部 Center Vertically Bottom 底部 Change objectName... Change toolTip... Change whatsThis... Change styleSheet... Create Menu Bar Add Tool Bar Create Status Bar Remove Status Bar Change script... Change signals/slots... Go to slot... Size Constraints Set Minimum Width Set Minimum Height Set Minimum Size Set Maximum Width Set Maximum Height Set Maximum Size Edit ToolTip Edit WhatsThis no signals available Set size constraint on %n widget(s) qdesigner_internal::QDesignerWidgetBox Unexpected element <%1> A parse error occurred at line %1, column %2 of the XML code specified for the widget %3: %4 %5 The XML code specified for the widget %1 does not contain any widget elements. %2 qdesigner_internal::RichTextEditorDialog Edit text Rich Text Source &OK 确定(&O) &Cancel 取消(&C) qdesigner_internal::RichTextEditorToolBar Bold 粗体 CTRL+B Italic 意大利体 CTRL+I Underline CTRL+U Left Align Center Right Align Justify Superscript Subscript Insert &Link Insert &Image Simplify Rich Text qdesigner_internal::ScriptDialog Edit script <html>Enter a Qt Script snippet to be executed while loading the form. The widget and its children are accessible via the variables widget and childWidgets, respectively. Syntax error qdesigner_internal::ScriptErrorDialog Script errors qdesigner_internal::SignalSlotDialog There is already a slot with the signature '%1'. There is already a signal with the signature '%1'. %1 - Duplicate Signature Signals/Slots of %1 qdesigner_internal::SignalSlotEditorPlugin Edit Signals/Slots F4 qdesigner_internal::SignalSlotEditorTool Edit Signals/Slots qdesigner_internal::StatusBarTaskMenu Remove 移除 qdesigner_internal::StringListEditorButton Change String List qdesigner_internal::StyleSheetEditorDialog Valid Style Sheet Add Resource... Add Gradient... Add Color... Add Font... Edit Style Sheet Invalid Style Sheet qdesigner_internal::TabOrderEditor Start from Here Restart Tab Order List... Tab Order List Tab Order qdesigner_internal::TabOrderEditorPlugin Edit Tab Order qdesigner_internal::TabOrderEditorTool Edit Tab Order qdesigner_internal::TableWidgetEditor Edit Table Widget &Items Table Items Properties &>> New Column New Row &Columns &Rows Properties &<< qdesigner_internal::TableWidgetTaskMenu Edit Items... qdesigner_internal::TemplateOptionsWidget Form Additional Template Paths ... Pick a directory to save templates in qdesigner_internal::TextEditTaskMenu Edit HTML Change HTML... Edit Text Change Plain Text... qdesigner_internal::TextEditor Choose Resource... Choose File... ... Choose a File qdesigner_internal::ToolBarEventFilter Insert Separator before '%1' Append Separator Remove action '%1' Remove Toolbar '%1' Insert Separator qdesigner_internal::TreeWidgetEditor Edit Tree Widget &Items Tree Items 1 New Item &New New Subitem New &Subitem Delete Item &Delete 删除(&D) Move Item Left (before Parent Item) L Move Item Right (as a First Subitem of the Next Sibling Item) R Move Item Up U Move Item Down D Properties &>> New Column &Columns Per column properties Common properties Properties &<< qdesigner_internal::TreeWidgetTaskMenu Edit Items... qdesigner_internal::WidgetBox Warning: Widget creation failed in the widget box. This could be caused by invalid custom widget XML. qdesigner_internal::WidgetBoxTreeWidget Scratchpad Custom Widgets Expand all Collapse all List View Icon View Remove 移除 Edit name qdesigner_internal::WidgetDataBase A custom widget plugin whose class name (%1) matches that of an existing class has been found. qdesigner_internal::WidgetEditorTool Edit Widgets qdesigner_internal::WidgetFactory The custom widget factory registered for widgets of class %1 returned 0. A class name mismatch occurred when creating a widget using the custom widget factory registered for widgets of class %1. It returned a widget of class %2. %1 Widget The current page of the container '%1' (%2) could not be determined while creating a layout.This indicates an inconsistency in the ui-file, probably a layout being constructed on a container widget. Attempt to add a layout to a widget '%1' (%2) which already has an unmanaged layout of type %3. This indicates an inconsistency in the ui-file. Cannot create style '%1'. qdesigner_internal::WizardContainerWidgetTaskMenu Next Back 后退 qdesigner_internal::ZoomMenu %1 % Zoom factor qdesigner_internal::ZoomablePreviewDeviceSkin &Zoom