mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-18 19:04:38 +00:00
e1661639d9
Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer. [1] https://radxa.com/products/rock5/5c Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
450 lines
14 KiB
Text
450 lines
14 KiB
Text
if ROCKCHIP_RK3588
|
|
|
|
config TARGET_EVB_RK3588
|
|
bool "Rockchip EVB1 v10"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
RK3588 EVB is a evaluation board for Rockchp RK3588.
|
|
|
|
config TARGET_CM3588_NAS_RK3588
|
|
bool "FriendlyElec CM3588 NAS"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
The CM3588 NAS by FriendlyElec pairs the CM3588 compute module, based
|
|
on the Rockchip RK3588 SoC, with the CM3588 NAS Kit carrier board.
|
|
|
|
Hardware features:
|
|
- Rockchip RK3588 SoC
|
|
- 4GB/8GB/16GB LPDDR4x RAM
|
|
- 0GB/64GB HS400 eMMC
|
|
- MicroSD card slot
|
|
- 1x RTL8125B 2.5G Ethernet
|
|
- 4x M.2 M-Key with PCIe 3.0 x1 (via bifurcation) for NVMe SSDs
|
|
- 2x USB 3.0 (USB 3.1 Gen1) Type-A, 1x USB 2.0 Type-A
|
|
- 1x USB 3.0 Type-C with DP AltMode support
|
|
- 2x HDMI 2.1 out, 1x HDMI in
|
|
- MIPI-CSI Connector, MIPI-DSI Connector
|
|
- 40-pin GPIO header
|
|
- 4 buttons: power, reset, recovery, MASK, user button
|
|
- 3.5mm Headphone out, 2.0mm PH-2A Mic in
|
|
- 5V Fan connector, PWM beeper, IR receiver, RTC battery connector
|
|
|
|
config TARGET_GENBOOK_CM5_RK3588
|
|
bool "Cool Pi CM5 GenBook"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
GeenBook is a notebook based on Rockchip RK3588, and works as a carrier
|
|
board connect with CM5 SOM.
|
|
|
|
Specification:
|
|
- Rockchip RK3588
|
|
- LPDDR5X 8/32 GB
|
|
- eMMC 64 GB
|
|
- HDMI Type A out x 1
|
|
- USB 3.0 Host x 1
|
|
- USB-C 3.0 with DisplayPort AltMode
|
|
- PCIE M.2 E Key for RTL8852BE Wireless connection
|
|
- PCIE M.2 M Key for NVME connection
|
|
- eDP panel with 1920x1080
|
|
|
|
config TARGET_JAGUAR_RK3588
|
|
bool "Theobroma Systems SBC-RK3588-AMR (Jaguar)"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
The SBC-RK3588-AMR is a Single Board Computer designed by
|
|
Theobroma Systems for autonomous mobile robots.
|
|
|
|
It provides the following features:
|
|
* up to 32GB LDDR4
|
|
* up to 128GB on-module eMMC (with 8-bit 1.8V interface)
|
|
* SD card
|
|
* Gigabit Ethernet
|
|
* 1x USB-A 2.0 host
|
|
* PCIe M.2 2230 Key M (Gen 2 1-lane) for WiFi+BT
|
|
* PCIe M.2 2280 Key M (Gen 3 4-lane) for NVMe
|
|
* CAN
|
|
* RS485 UART
|
|
* 2x USB Type-C 3.1 host/device
|
|
* HDMI output
|
|
* 2x camera connectors (MIPI-CSI 2-lane + I2C/SPI for IMUs + GPIOs)
|
|
* EEPROM
|
|
* Secure Element
|
|
* ATtiny companion controller implementing:
|
|
- low-power RTC functionality (ISL1208 emulation)
|
|
- fan controller (AMC6821 emulation)
|
|
* 80-pin Mezzanine connector
|
|
|
|
config TARGET_KHADAS_EDGE2_RK3588
|
|
bool "Khadas Edge2 RK3588 board"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
Khadas Edge2 is a Rockchip RK3588S based SBC (Single Board Computer)
|
|
by Khadas.
|
|
|
|
There are tree variants depending on the DRAM size : 8G and 16G.
|
|
|
|
Specification:
|
|
|
|
Rockchip RK3588S SoC
|
|
4x ARM Cortex-A76, 4x ARM Cortex-A55
|
|
8/16GB memory LPDDR4x
|
|
Mali G610MP4 GPU
|
|
3x MIPI CSI 4x lanes
|
|
2x MIPI-DSI DPHY 4x lanes
|
|
32/64GB eMMC
|
|
1x USB 2.0, 1x USB 3.0, 2x USB-Type-C
|
|
1x HDMI 2.1 output, 1x DP 1.4 output
|
|
USB PD over USB Type-C
|
|
|
|
config TARGET_NANOPCT6_RK3588
|
|
bool "FriendlyElec NanoPC-T6 RK3588 board"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
The NanoPC-T6 is a Rockchip RK3588 based SBC by FriendlyElec.
|
|
|
|
There are four variants depending on the DRAM size: 4G/32GB eMMC,
|
|
8G/64GB eMMC, 16G/16MB SPI NOR, and 16G/256GB eMMC/16MB SPI NOR
|
|
|
|
Specifications:
|
|
|
|
CPU: Rockchip RK3588, 4x Cortex-A76 (up to 2.4GHz)
|
|
+ 4x Cortex-A55 (up to 1.8GHz)
|
|
GPU: Mali-G610 MP4
|
|
VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder,
|
|
4K@60fps AV1 decoder, 8K@30fps H.264 and H.265 encoder
|
|
NPU: 6TOPs, supports INT4/INT8/INT16/FP16
|
|
RAM: 64-bit 4GB/8GB/16GB LPDDR4X at 2133MHz
|
|
eMMC: 0GB/32GB/64GB/256GB HS400
|
|
MicroSD Slot: MicroSD SDR104
|
|
PCIe 3.0: M.2 M-Key x1, PCIe 3.0 x4 for NVMe SSDs up to 2,500 MB/s
|
|
Ethernet: PCIe 2.5G 2x Ethernet (RTL8125BG)
|
|
PCIe 2.1: M.2 E-Key x1, PCIe 2.1 x1 and USB2.0 Host,
|
|
supports M.2 WiFi and Bluetooth
|
|
4G Module: MiniPCIe x1, MicroSIM Card Slot x1
|
|
Audio Out: 3.5mm jack for stereo headphone output
|
|
Audio In: 2.0mm PH-2A connector for analog microphone input
|
|
Video Input: standard HDMI input port, up to 4Kp60
|
|
2x 4-lane MIPI-CSI, compatible with MIPI V1.2
|
|
Video Output: 2x standard HDMI output ports compatible with HDMI2.1,
|
|
HDMI2.0, and HDMI1.4
|
|
2x 4-lane MIPI-DSI, compatible with MIPI DPHY 2.0 or CPHY 1.1
|
|
USB-A: USB 3.0, Type A
|
|
USB-C: Full function USB Type-C port, DP display up to 4Kp60, USB 3.0
|
|
40-pin 2.54mm header connector: up to 2x SPIs, 6x UARTs, 1x I2Cs,
|
|
8x PWMs, 2x I2Ss, 28x GPIOs
|
|
Debug UART: 3 Pin 2.54mm header, 3V level, 1500000bps
|
|
Onboard IR receiver: 38KHz carrier frequency
|
|
RTC Battery: 2 Pin 1.27/1.25mm RTC battery connector for low power
|
|
RTC IC HYM8563TS
|
|
5V Fan connector
|
|
Working Temperature: 0C to 70C
|
|
Power: 5.5*2.1mm DC Jack, 12VDC input
|
|
Dimensions: 110x80x1.6mm (without case) / 86x114.5x30mm (with case)
|
|
|
|
config TARGET_NANOPI_R6C_RK3588S
|
|
bool "FriendlyElec NanoPi R6C"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
The NanoPi R6C is a SBC by FriendlyElec based on the Rockchip
|
|
RK3588s.
|
|
It comes with 4GB or 8GB of RAM, a microSD card slot, optional 32GB
|
|
eMMC storage, one M.2 M-Key connector, one RTL8211F 1GbE and one
|
|
RTL8125 2.5GbE Ethernet port, one USB 2.0 Type-A and one USB 3.0
|
|
Type-A port, a HDMI port, a 30-pin GPIO header as well as some
|
|
buttons and LEDs.
|
|
|
|
config TARGET_NANOPI_R6S_RK3588S
|
|
bool "FriendlyElec NanoPi R6S"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
The NanoPi R6S is a SBC by FriendlyElec based on the Rockchip
|
|
RK3588s.
|
|
It comes with 4GB or 8GB of RAM, a microSD card slot, 32GB eMMC
|
|
storage, one RTL8211F 1GbE and two RTL8125 2.5GbE Ethernet ports,
|
|
one USB 2.0 Type-A and one USB 3.0 Type-A port, a HDMI port, a
|
|
12-pin GPIO FPC connector, a fan connector, IR receiver as well
|
|
as some buttons and LEDs.
|
|
|
|
config TARGET_NOVA_RK3588
|
|
bool "Indiedroid Nova RK3588"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
Indiedroid Nova is a Rockchip RK3588s based SBC by Indiedroid.
|
|
It comes in configurations from 4GB of RAM to 16GB of RAM,
|
|
includes socket for eMMC storage, an SDMMC slot, and a 40-pin
|
|
GPIO header for expansion.
|
|
|
|
config TARGET_ODROID_M2_RK3588S
|
|
bool "Hardkernel ODROID-M2"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
Hardkernel ODROID-M2 single board computer with a RK3588S2 SoC.
|
|
|
|
config TARGET_RK3588_NEU6
|
|
bool "Edgeble Neural Compute Module 6(Neu6) SoM"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
Neu6A:
|
|
Neural Compute Module 6A(Neu6A) is a 96boards SoM-CB compute module
|
|
based on Rockchip RK3588 from Edgeble AI.
|
|
|
|
Neu6A-IO:
|
|
Neural Compute Module 6A(Neu6A) IO board is an industrial form factor
|
|
IO board and Neu6a needs to mount on top of this IO board in order to
|
|
create complete Edgeble Neural Compute Module 6A(Neu6A) IO platform.
|
|
|
|
Neu6B:
|
|
Neural Compute Module 6B(Neu6B) is a 96boards SoM-CB compute module
|
|
based on Rockchip RK3588J from Edgeble AI.
|
|
|
|
Neu6A-IO:
|
|
Neural Compute Module 6B(Neu6B) IO board is an industrial form factor
|
|
IO board and Neu6a needs to mount on top of this IO board in order to
|
|
create complete Edgeble Neural Compute Module 6B(Neu6B) IO platform.
|
|
|
|
config TARGET_ROCK5A_RK3588
|
|
bool "Radxa ROCK5A RK3588 board"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
Radxa ROCK5A is a Rockchip RK3588S based SBC (Single Board Computer)
|
|
by Radxa.
|
|
|
|
There are tree variants depending on the DRAM size : 4G, 8G and 16G.
|
|
|
|
Specification:
|
|
|
|
Rockchip Rk3588S SoC
|
|
4x ARM Cortex-A76, 4x ARM Cortex-A55
|
|
4/8/16GB memory LPDDR4x
|
|
Mali G610MC4 GPU
|
|
MIPI CSI 2 multiple lanes connector
|
|
4-lane MIPI DSI connector
|
|
Audio - 3.5mm earphone jack
|
|
eMMC module connector
|
|
uSD slot (up to 128GB)
|
|
2x USB 2.0, 2x USB 3.0
|
|
2x micro HDMI 2.1 ports, one up to 8Kp60, the other up to 4Kp60
|
|
Gigabit Ethernet RJ45 with optional PoE support
|
|
40-pin IO header including UART, SPI, I2C and 5V DC power in
|
|
USB PD over USB Type-C
|
|
Size: 85mm x 56mm (Raspberry Pi 4 form factor)
|
|
|
|
config TARGET_ROCK5B_RK3588
|
|
bool "Radxa ROCK5B RK3588 board"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
Radxa ROCK5B is a Rockchip RK3588 based SBC (Single Board Computer)
|
|
by Radxa.
|
|
|
|
There are tree variants depending on the DRAM size : 4G, 8G and 16G.
|
|
|
|
Specification:
|
|
|
|
Rockchip Rk3588 SoC
|
|
4x ARM Cortex-A76, 4x ARM Cortex-A55
|
|
4/8/16GB memory LPDDR4x
|
|
Mali G610MC4 GPU
|
|
2x MIPI CSI 2 multiple lanes connector
|
|
eMMC module connector
|
|
uSD slot (up to 128GB)
|
|
2x USB 2.0 Type-A, 2x USB 3.0 Type-A, 1x USB 3.0 Type-C
|
|
2x HDMI 2.1 output, 1x micro HDMI input
|
|
2.5 Gbps Ethernet port
|
|
40-pin IO header including UART, SPI, I2C and 5V DC power in
|
|
USB PD over USB Type-C
|
|
Size: 100mm x 72mm (Pico-ITX form factor)
|
|
|
|
config TARGET_ROCK_5_ITX_RK3588
|
|
bool "Radxa ROCK-5-ITX RK3588 board"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
Radxa ROCK-5-ITX is a Rockchip RK3588 based SBC (Single Board
|
|
Computer) by Radxa in the ITX formfactor.
|
|
|
|
There are variants depending on the DRAM size : from 4G up to 32G.
|
|
|
|
Specification:
|
|
|
|
Rockchip Rk3588 SoC
|
|
4x ARM Cortex-A76, 4x ARM Cortex-A55
|
|
4/8/16/24/32GB memory LPDDR5
|
|
Mali G610MC4 GPU
|
|
2x MIPI CSI 2 multiple lanes connector
|
|
eMMC
|
|
uSD slot (up to 128GB)
|
|
M.2 M-key and M.2 E-key connector
|
|
4x SATA
|
|
2x USB 2.0 + 4x USB 3.0 Type-A, 2x USB 2.0 Panel, 1x USB 3.0 Type-C
|
|
2x HDMI 2.1 output, 1x HDMI input
|
|
DP via Type-C
|
|
2x DSI via PCB connector
|
|
2x 2.5 Gbps Ethernet port
|
|
Front-panel connectors for audio and case-power, -leds
|
|
Powered by either 12V, ATX power-supply or PoE
|
|
|
|
config TARGET_ROCK_5C_RK3588S
|
|
bool "Radxa ROCK 5C RK3588S2 board"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
Radxa ROCK 5C is a Rockchip RK3588S2 based single board computer.
|
|
|
|
Specification:
|
|
|
|
Quad A76 and Quad A55 CPU
|
|
6 TOPS NPU
|
|
up to 32GB LPDDR4x RAM
|
|
eMMC / SPI flash connector
|
|
Micro SD Card slot
|
|
Gigabit ethernet port (supports PoE with add-on PoE HAT)
|
|
WiFi6 / BT5.4
|
|
1x USB 3.0 Type-A HOST port
|
|
1x USB 3.0 Type-A OTG port
|
|
2x USB 2.0 Type-A HOST port
|
|
1x USB Type-C 5V power port
|
|
|
|
config TARGET_SIGE7_RK3588
|
|
bool "ArmSoM Sige7 RK3588 board"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer)
|
|
by ArmSoM.
|
|
|
|
There are two variants depending on the DRAM size : 8G and 16G.
|
|
|
|
Specification:
|
|
|
|
Rockchip Rk3588 SoC
|
|
4x ARM Cortex-A76, 4x ARM Cortex-A55
|
|
8/16GB memory LPDDR4x
|
|
Mali G610MC4 GPU
|
|
2x MIPI CSI 2 multiple lanes connector
|
|
64GB/128GB on board eMMC
|
|
uSD slot
|
|
1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C
|
|
1x HDMI 2.1 output
|
|
2x 2.5 Gbps Ethernet port
|
|
40-pin IO header including UART, SPI and I2C
|
|
USB PD over USB Type-C
|
|
Size: 92mm x 62mm
|
|
|
|
config TARGET_QUARTZPRO64_RK3588
|
|
bool "Pine64 QuartzPro64 RK3588 board"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
Pine64 QuartzPro64 is a Rockchip RK3588 based SBC (Single Board
|
|
Computer) by Pine64.
|
|
|
|
config TARGET_TIGER_RK3588
|
|
bool "Theobroma Systems SOM-RK3588-Q7 (Tiger)"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
The RK3588-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
|
|
connector) system-on-module from Theobroma Systems, featuring the
|
|
Rockchip RK3588.
|
|
|
|
It provides the following feature set:
|
|
* up to 16GB LPDDR4x
|
|
* on-module eMMC
|
|
* SD card (on a baseboard) via edge connector
|
|
* Gigabit Ethernet with on-module GbE PHY
|
|
* HDMI/eDP
|
|
* MIPI-DSI
|
|
* 4x MIPI-CSI (3x on FPC connectors, 1x over Q7)
|
|
* HDMI input over FPC connector
|
|
* CAN
|
|
* USB
|
|
- 1x USB 3.0 dual-role (direct connection)
|
|
- 2x USB 3.0 host + 1x USB 2.0 host
|
|
* PCIe
|
|
- 1x PCIe 2.1 Gen3, 4 lanes
|
|
- 2xSATA / 2x PCIe 2.1 Gen1, 2 lanes
|
|
* on-module ATtiny816 companion controller, implementing:
|
|
- low-power RTC functionality (ISL1208 emulation)
|
|
- fan controller (AMC6821 emulation)
|
|
* on-module Secure Element with Global Platform 2.2.1 compliant
|
|
JavaCard environment
|
|
|
|
config TARGET_TURINGRK1_RK3588
|
|
bool "Turing Machines RK1 RK3588 board"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
The Turing RK1 is a Rockchip RK3588 based SoM from Turing Machines.
|
|
|
|
There are three variants depending on the DRAM size : 8G, 16G and 32G.
|
|
|
|
Specifications:
|
|
|
|
Rockchip RK3588 SoC
|
|
4x ARM Cortex-A76, 4x ARM Cortex-A55
|
|
8/16/32GB memory LPDDR4x
|
|
Mali G610MC4 GPU
|
|
32GB eMMC HS400
|
|
2x USB 2.0, 2x USB 3.0
|
|
2x MIPI CSI 4x lanes
|
|
1x MIPI-DSI DPHY 2x lanes
|
|
PCIe 2.0 x1, PCIe 3.0 x4
|
|
1x HDMI 2.1 output, 1x DP 1.4 output
|
|
Gigabit Ethernet
|
|
Size: 69.6mm x 45mm (260-pin SO-DIMM connector)
|
|
|
|
config TARGET_TOYBRICK_RK3588
|
|
bool "Toybrick TB-RK3588X board"
|
|
select BOARD_LATE_INIT
|
|
help
|
|
Rockchip Toybrick TB-RK3588X is a Rockchip RK3588 based development board.
|
|
TB-RK3588X adopts core board and mainboard design. The core board is connected
|
|
with the mainboard through the MXM314Pin standard interface, which can form
|
|
a complete industry development board.
|
|
|
|
Specifications:
|
|
|
|
Rockchip RK3588 SoC
|
|
4x ARM Cortex-A76, 4x ARM Cortex-A55
|
|
8/16GB Memory LPDDR4x
|
|
Mali G610MC4 GPU
|
|
2x MIPI-CSI0 Connector
|
|
1x 2Lanes PCIe3.0 Connector
|
|
1x SATA3.0 Connector
|
|
32GB eMMC Module
|
|
2x USB2.0, 2x USB3.0
|
|
1x HDMI Output, 1x HDMI Input
|
|
2x Ethernet Port
|
|
|
|
|
|
config ROCKCHIP_BOOT_MODE_REG
|
|
default 0xfd588080
|
|
|
|
config ROCKCHIP_STIMER_BASE
|
|
default 0xfd8c8000
|
|
|
|
config SYS_SOC
|
|
default "rk3588"
|
|
|
|
config ROCKCHIP_COMMON_STACK_ADDR
|
|
default y
|
|
|
|
config TEXT_BASE
|
|
default 0x00a00000
|
|
|
|
source "board/armsom/sige7-rk3588/Kconfig"
|
|
source "board/coolpi/genbook_cm5_rk3588/Kconfig"
|
|
source "board/edgeble/neural-compute-module-6/Kconfig"
|
|
source "board/friendlyelec/cm3588-nas-rk3588/Kconfig"
|
|
source "board/friendlyelec/nanopc-t6-rk3588/Kconfig"
|
|
source "board/friendlyelec/nanopi-r6c-rk3588s/Kconfig"
|
|
source "board/friendlyelec/nanopi-r6s-rk3588s/Kconfig"
|
|
source "board/hardkernel/odroid_m2/Kconfig"
|
|
source "board/indiedroid/nova/Kconfig"
|
|
source "board/khadas/khadas-edge2-rk3588s/Kconfig"
|
|
source "board/pine64/quartzpro64-rk3588/Kconfig"
|
|
source "board/turing/turing-rk1-rk3588/Kconfig"
|
|
source "board/radxa/rock5a-rk3588s/Kconfig"
|
|
source "board/radxa/rock5b-rk3588/Kconfig"
|
|
source "board/radxa/rock-5-itx-rk3588/Kconfig"
|
|
source "board/radxa/rock-5c-rk3588s/Kconfig"
|
|
source "board/rockchip/evb_rk3588/Kconfig"
|
|
source "board/rockchip/toybrick_rk3588/Kconfig"
|
|
source "board/theobroma-systems/jaguar_rk3588/Kconfig"
|
|
source "board/theobroma-systems/tiger_rk3588/Kconfig"
|
|
|
|
endif
|