mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-17 02:15:02 +00:00
b16bd53ffa
Add i.MX93 9x9 Quick Start Board support. - Two ddr scripts included w/o inline ecc feature. - SDHC/NETWORK/I2C/UART supported - PCA9450 supported, default over drive mode - Documentation added. Signed-off-by: Peng Fan <peng.fan@nxp.com>
70 lines
1.5 KiB
ReStructuredText
70 lines
1.5 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
imx93_9x9_qsb
|
|
=======================
|
|
|
|
U-Boot for the NXP i.MX93 Quick Start Board
|
|
|
|
Quick Start
|
|
-----------
|
|
|
|
- Get and Build the ARM Trusted firmware
|
|
- Get the DDR firmware
|
|
- Get ahab-container.img
|
|
- Build U-Boot
|
|
- Boot
|
|
|
|
Get and Build the ARM Trusted firmware
|
|
--------------------------------------
|
|
|
|
Note: srctree is U-Boot source directory
|
|
Get ATF from: https://github.com/nxp-imx/imx-atf/
|
|
branch: lf_v2.10
|
|
|
|
.. code-block:: bash
|
|
|
|
$ unset LDFLAGS
|
|
$ make PLAT=imx93 bl31
|
|
$ cp build/imx93/release/bl31.bin $(srctree)
|
|
|
|
Get the DDR firmware
|
|
--------------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.21.bin
|
|
$ chmod +x firmware-imx-8.21.bin
|
|
$ ./firmware-imx-8.21.bin
|
|
$ cp firmware-imx-8.21/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
|
|
|
|
Get ahab-container.img
|
|
---------------------------------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.11.bin
|
|
$ chmod +x firmware-sentinel-0.11.bin
|
|
$ ./firmware-sentinel-0.11.bin
|
|
$ cp firmware-sentinel-0.11/mx93a1-ahab-container.img $(srctree)
|
|
|
|
Build U-Boot
|
|
------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ export CROSS_COMPILE=aarch64-poky-linux-
|
|
$ make imx93_9x9_qsb_defconfig or imx93_9x9_qsb_inline_ecc_defconfig
|
|
$ make
|
|
|
|
- Inline ECC is to enable DDR ECC feature with imx93_9x9_qsb_inline_ecc_defconfig
|
|
|
|
Burn the flash.bin to MicroSD card offset 32KB:
|
|
|
|
.. code-block:: bash
|
|
|
|
$ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
|
|
|
|
Boot
|
|
----
|
|
|
|
Set Boot switch to SD boot
|