mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-16 01:44:34 +00:00
faa61a5012
Siddharth Vadapalli <s-vadapalli@ti.com> says: Hello, This series adds support for USB DFU boot on TI's AM62A SoC which has two instances of DWC3 USB Controllers namely USB0 and USB1. The USB0 instance of the USB Controller supports USB DFU boot: ROM => tiboot3.bin => tispl.bin => u-boot.img USB DFU Boot requires the USB Controller to be configured for Gadget mode of operation. Since the USB0 instance of the DWC3 USB Controller supports both Host and Gadget modes of operation via the Type-C interface on the AM62A7-SK board, the device-tree specifies the "dr_mode" as "OTG". However, there is currently no support for dynamically switching the "mode" from Host to Gadget and vice-versa with the help of a state-machine. The OTG mode is treated as a separate mode in itself rather than being treated as an intermediate stage before assuming the Host/Gadget mode. Due to this, USB DFU boot via the Type-C interface doesn't work as the USB Controller hasn't been appropriately configured for Device/Gadget mode of operation. One option is to change the device-tree to specify "dr_mode" as "peripheral" and force the controller to assume the Device role. This will imply that the U-Boot device-tree for AM62A diverges from its Linux counterpart. Therefore, with the intent of keeping the device-tree uniform across Linux and U-Boot, and at the same time, in order to enable USB DFU boot in "OTG" mode with the DWC3 Controller, the first patch in this series sets the "mode" on the basis of the caller function, rather than using the "dr_mode" property in the device-tree. There are only two callers of "dwc3_generic_probe()", each of which clearly specify the expected mode of configuration. This will enable both Host and Device mode of operation based on the command executed by the user, thereby truly supporting "OTG" functionality when the USB Controller supports it. The second patch in this series adds USB DFU environment for AM62A, enabling USB DFU Boot and USB DFU flash on AM62A. In addition to the patches in this series, the following device-tree changes will be required to test USB DFU on AM62A (bootph-all property to be added to ensure that USB Controller is present at all stages for DFU Boot): https://gist.github.com/Siddharth-Vadapalli-at-TI/53ba02cb0ff4a09c47e920d08247065f The above device-tree changes will be made to the Linux device-tree, which shall ensure that the same shall be a part of U-Boot device-tree eventually. The USB DFU config fragments for AM62x have been used for enabling USB DFU boot on AM62a as follows: R5 => am62ax_evm_r5_defconfig + am62x_r5_usbdfu.config A53 => am62ax_evm_a53_defconfig + am62x_a53_usbdfu.config Logs validating USB DFU boot with this series: https://gist.github.com/Siddharth-Vadapalli-at-TI/daa71da1b0e478a51afea42605fb2d2c Link: https://lore.kernel.org/r/20241126120322.1760862-1-s-vadapalli@ti.com |
||
|---|---|---|
| .. | ||
| cdns3 | ||
| common | ||
| dwc3 | ||
| emul | ||
| eth | ||
| gadget | ||
| host | ||
| isp1760 | ||
| mtu3 | ||
| musb | ||
| musb-new | ||
| phy | ||
| tcpm | ||
| ulpi | ||
| Kconfig | ||