mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-26 15:28:50 +00:00
b06a0b4781
The udoo_neo_defconfig target supports several board variants. All of these variants use the imx6sx-udoo-neo-basic devicetree in U-Boot. Currently, the devicetree model as well as the board variant name are shown: ... Model: UDOO Neo Basic Board: UDOO Neo FULL ... Printing the devicetree model that is used internally by U-Boot may confuse users. Unselect the CONFIG_DISPLAY_BOARDINFO option and move the board printing inside board_init() so that only the real board name that is detected in run-time is printed. Signed-off-by: Fabio Estevam <festevam@gmail.com> |
||
|---|---|---|
| .. | ||
| neo | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
| udoo.c | ||
| udoo_spl.c | ||
How to use U-Boot on MX6Q/DL Udoo boards ---------------------------------------- - Build U-Boot for MX6Q/DL Udoo boards: $ make mrproper $ make udoo_defconfig $ make This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the SD card: sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync - Flash the u-boot.img image into the SD card: sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync - Insert the SD card in the board, power it up and U-Boot messages should come up.