mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-23 05:08:24 +00:00
71b7bd86ed
Add documentation for imxrt1170-evk. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Add index page entry, adjust formatting. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
50 lines
1.2 KiB
ReStructuredText
50 lines
1.2 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
imxrt1170-evk
|
|
=============
|
|
|
|
How to use U-Boot on NXP i.MXRT1170 EVK
|
|
---------------------------------------
|
|
|
|
- Build U-Boot for i.MXRT1170 EVK:
|
|
|
|
.. code-block:: bash
|
|
|
|
$ make mrproper
|
|
$ make imxrt1170-evk_defconfig
|
|
$ make
|
|
|
|
This will generate the SPL image called SPL and the u-boot.img.
|
|
|
|
- Flash the SPL image into the micro SD card:
|
|
|
|
.. code-block:: bash
|
|
|
|
$sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync
|
|
|
|
This location is not compatible with GPT partioning. Please, use MBR
|
|
partitioning instead.
|
|
|
|
- Flash the u-boot.img image into the micro SD card:
|
|
|
|
.. code-block:: bash
|
|
|
|
$sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync
|
|
|
|
- Jumper settings
|
|
|
|
.. list-table::
|
|
:stub-columns: 1
|
|
|
|
* - SW1
|
|
- 1 0 1 0
|
|
* - SW2
|
|
- 0 0 0 0 | 0 0 0 0 | 1 0 0 0
|
|
|
|
where 0 means bottom position and 1 means top position (from the
|
|
switch label numbers reference).
|
|
|
|
- Connect the USB cable between the EVK and the PC for the console.
|
|
The USB console connector is the one close the ethernet connector
|
|
|
|
- Insert the micro SD card in the board, power it up and U-Boot messages should come up.
|