mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-23 22:14:54 +00:00
3952365515
The mx6cuboxi_defconfig target supports several board variants. All of these variants use the hummingboard devicetree in U-Boot. Currently, the devicetree model as well as the board variant name are shown: ... Model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc) Board: MX6 Cubox-i ... Printing the devicetree model that is used internally by U-Boot may confuse users. Unselect the CONFIG_DISPLAY_BOARDINFO option so that only the board name is printed in board_late_init() instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Christian Gmeiner <cgmeiner@igalia.com> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| mx6cuboxi.c | ||
| README | ||
How to use U-Boot on Solid-run mx6 Hummingboard and Cubox-i ----------------------------------------------------------- - Build U-Boot for Hummingboard/Cubox-i: $ make mrproper $ make mx6cuboxi_defconfig $ make This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the SD card: sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync - Flash the u-boot.img image into the SD card: sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync - Insert the SD card in the board, power it up and U-Boot messages should come up.