u-boot/arch/arm/mach-k3/common.c
Tom Rini b566f7d239 Merge patch series "Introduce ICSSG Ethernet driver"
MD Danish Anwar <danishanwar@ti.com> says:

Introduce ICSSG PRUETH support in uboot. The ICSSG driver is used in TI
AM654 SR2.0.

The ICSSG PRU Sub-system runs on EMAC firmware. This series Introduces
support for ICSSG driver in uboot.

This series has been tested on AM65x SR2.0, and the ICSSG interface is
able to ping / dhcp and boot kernel using tftp in uboot.

To use ICSSG2 ethernet, the ICSSG firmware needs to be loaded to PRU RPROC
cores and RPROC cores need to be booted with the firmware. This step is
done inside driver similar to kernel.

The remoteproc driver uses request_fw_into_buf() API from fs-loader driver
to load and start rproc with the required firmwares.

This series only introduces driver files. The device tree and config
changes to enable ICSSG driver will be introduced later.
2024-04-12 13:59:12 -06:00

321 lines
7.1 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* K3: Common Architecture initialization
*
* Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/
* Lokesh Vutla <lokeshvutla@ti.com>
*/
#include <config.h>
#include <cpu_func.h>
#include <image.h>
#include <init.h>
#include <log.h>
#include <spl.h>
#include <asm/global_data.h>
#include <linux/printk.h>
#include "common.h"
#include <dm.h>
#include <remoteproc.h>
#include <asm/cache.h>
#include <linux/soc/ti/ti_sci_protocol.h>
#include <fdt_support.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <fs_loader.h>
#include <fs.h>
#include <efi_loader.h>
#include <env.h>
#include <elf.h>
#include <soc.h>
#include <asm/arch/k3-qos.h>
struct ti_sci_handle *get_ti_sci_handle(void)
{
struct udevice *dev;
int ret;
ret = uclass_get_device_by_driver(UCLASS_FIRMWARE,
DM_DRIVER_GET(ti_sci), &dev);
if (ret)
panic("Failed to get SYSFW (%d)\n", ret);
return (struct ti_sci_handle *)ti_sci_get_handle_from_sysfw(dev);
}
void k3_sysfw_print_ver(void)
{
struct ti_sci_handle *ti_sci = get_ti_sci_handle();
char fw_desc[sizeof(ti_sci->version.firmware_description) + 1];
/*
* Output System Firmware version info. Note that since the
* 'firmware_description' field is not guaranteed to be zero-
* terminated we manually add a \0 terminator if needed. Further
* note that we intentionally no longer rely on the extended
* printf() formatter '%.*s' to not having to require a more
* full-featured printf() implementation.
*/
strncpy(fw_desc, ti_sci->version.firmware_description,
sizeof(ti_sci->version.firmware_description));
fw_desc[sizeof(fw_desc) - 1] = '\0';
printf("SYSFW ABI: %d.%d (firmware rev 0x%04x '%s')\n",
ti_sci->version.abi_major, ti_sci->version.abi_minor,
ti_sci->version.firmware_revision, fw_desc);
}
void mmr_unlock(uintptr_t base, u32 partition)
{
/* Translate the base address */
uintptr_t part_base = base + partition * CTRL_MMR0_PARTITION_SIZE;
/* Unlock the requested partition if locked using two-step sequence */
writel(CTRLMMR_LOCK_KICK0_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK0);
writel(CTRLMMR_LOCK_KICK1_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK1);
}
bool is_rom_loaded_sysfw(struct rom_extended_boot_data *data)
{
if (strncmp(data->header, K3_ROM_BOOT_HEADER_MAGIC, 7))
return false;
return data->num_components > 1;
}
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_K3_EARLY_CONS
int early_console_init(void)
{
struct udevice *dev;
int ret;
gd->baudrate = CONFIG_BAUDRATE;
ret = uclass_get_device_by_seq(UCLASS_SERIAL, CONFIG_K3_EARLY_CONS_IDX,
&dev);
if (ret) {
printf("Error getting serial dev for early console! (%d)\n",
ret);
return ret;
}
gd->cur_serial_dev = dev;
gd->flags |= GD_FLG_SERIAL_READY;
gd->have_console = 1;
return 0;
}
#endif
#if CONFIG_IS_ENABLED(FIT_IMAGE_POST_PROCESS) && !IS_ENABLED(CONFIG_SYS_K3_SPL_ATF)
void board_fit_image_post_process(const void *fit, int node, void **p_image,
size_t *p_size)
{
ti_secure_image_check_binary(p_image, p_size);
ti_secure_image_post_process(p_image, p_size);
}
#endif
#ifndef CONFIG_SYSRESET
void reset_cpu(void)
{
}
#endif
enum k3_device_type get_device_type(void)
{
u32 sys_status = readl(K3_SEC_MGR_SYS_STATUS);
u32 sys_dev_type = (sys_status & SYS_STATUS_DEV_TYPE_MASK) >>
SYS_STATUS_DEV_TYPE_SHIFT;
u32 sys_sub_type = (sys_status & SYS_STATUS_SUB_TYPE_MASK) >>
SYS_STATUS_SUB_TYPE_SHIFT;
switch (sys_dev_type) {
case SYS_STATUS_DEV_TYPE_GP:
return K3_DEVICE_TYPE_GP;
case SYS_STATUS_DEV_TYPE_TEST:
return K3_DEVICE_TYPE_TEST;
case SYS_STATUS_DEV_TYPE_EMU:
return K3_DEVICE_TYPE_EMU;
case SYS_STATUS_DEV_TYPE_HS:
if (sys_sub_type == SYS_STATUS_SUB_TYPE_VAL_FS)
return K3_DEVICE_TYPE_HS_FS;
else
return K3_DEVICE_TYPE_HS_SE;
default:
return K3_DEVICE_TYPE_BAD;
}
}
#if defined(CONFIG_DISPLAY_CPUINFO)
static const char *get_device_type_name(void)
{
enum k3_device_type type = get_device_type();
switch (type) {
case K3_DEVICE_TYPE_GP:
return "GP";
case K3_DEVICE_TYPE_TEST:
return "TEST";
case K3_DEVICE_TYPE_EMU:
return "EMU";
case K3_DEVICE_TYPE_HS_FS:
return "HS-FS";
case K3_DEVICE_TYPE_HS_SE:
return "HS-SE";
default:
return "BAD";
}
}
int print_cpuinfo(void)
{
struct udevice *soc;
char name[64];
int ret;
printf("SoC: ");
ret = soc_get(&soc);
if (ret) {
printf("UNKNOWN\n");
return 0;
}
ret = soc_get_family(soc, name, 64);
if (!ret) {
printf("%s ", name);
}
ret = soc_get_revision(soc, name, 64);
if (!ret) {
printf("%s ", name);
}
printf("%s\n", get_device_type_name());
return 0;
}
#endif
#ifdef CONFIG_ARM64
void board_prep_linux(struct bootm_headers *images)
{
debug("Linux kernel Image start = 0x%lx end = 0x%lx\n",
images->os.start, images->os.end);
__asm_flush_dcache_range(images->os.start,
ROUND(images->os.end,
CONFIG_SYS_CACHELINE_SIZE));
}
#endif
void spl_enable_cache(void)
{
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
gd->ram_top = CFG_SYS_SDRAM_BASE;
int ret = 0;
dram_init();
/* reserve TLB table */
gd->arch.tlb_size = PGTABLE_SIZE;
gd->ram_top += get_effective_memsize();
/* keep ram_top in the 32-bit address space */
if (gd->ram_top >= 0x100000000)
gd->ram_top = (phys_addr_t)0x100000000;
gd->relocaddr = gd->ram_top;
ret = spl_reserve_video_from_ram_top();
if (ret)
panic("Failed to reserve framebuffer memory (%d)\n", ret);
gd->arch.tlb_addr = gd->relocaddr - gd->arch.tlb_size;
gd->arch.tlb_addr &= ~(0x10000 - 1);
debug("TLB table from %08lx to %08lx\n", gd->arch.tlb_addr,
gd->arch.tlb_addr + gd->arch.tlb_size);
gd->relocaddr = gd->arch.tlb_addr;
enable_caches();
#endif
}
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
void spl_board_prepare_for_boot(void)
{
dcache_disable();
}
void spl_board_prepare_for_linux(void)
{
dcache_disable();
}
#endif
int misc_init_r(void)
{
if (IS_ENABLED(CONFIG_TI_AM65_CPSW_NUSS)) {
struct udevice *dev;
int ret;
ret = uclass_get_device_by_driver(UCLASS_MISC,
DM_DRIVER_GET(am65_cpsw_nuss),
&dev);
if (ret)
printf("Failed to probe am65_cpsw_nuss driver\n");
}
if (IS_ENABLED(CONFIG_TI_ICSSG_PRUETH)) {
struct udevice *dev;
int ret;
ret = uclass_get_device_by_driver(UCLASS_MISC,
DM_DRIVER_GET(prueth),
&dev);
if (ret)
printf("Failed to probe prueth driver\n");
}
/* Default FIT boot on HS-SE devices */
if (get_device_type() == K3_DEVICE_TYPE_HS_SE)
env_set("boot_fit", "1");
return 0;
}
/**
* do_board_detect() - Detect board description
*
* Function to detect board description. This is expected to be
* overridden in the SoC family board file where desired.
*/
void __weak do_board_detect(void)
{
}
#if (IS_ENABLED(CONFIG_K3_QOS))
void setup_qos(void)
{
u32 i;
for (i = 0; i < qos_count; i++)
writel(qos_data[i].val, (uintptr_t)qos_data[i].reg);
}
#endif
void efi_add_known_memory(void)
{
if (IS_ENABLED(CONFIG_EFI_LOADER))
/*
* Memory over ram_top can be used by various firmware
* Declare to EFI only memory area below ram_top
*/
efi_add_memory_map(gd->ram_base, gd->ram_top - gd->ram_base,
EFI_CONVENTIONAL_MEMORY);
}