mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-27 07:51:38 +00:00
752c376987
This fixture name is quite long and results in lots of verbose code. We know this is U-Boot so the 'u_boot_' part is not necessary. But it is also a bit of a misnomer, since it provides access to all the information available to tests. It is not just the console. It would be too confusing to use con as it would be confused with config and it is probably too short. So shorten it to 'ubman'. Signed-off-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/u-boot/CAFLszTgPa4aT_J9h9pqeTtLCVn4x2JvLWRcWRD8NaN3uoSAtyA@mail.gmail.com/
85 lines
3.3 KiB
Python
85 lines
3.3 KiB
Python
# SPDX-License-Identifier: GPL-2.0
|
|
|
|
import pytest
|
|
import u_boot_utils
|
|
|
|
@pytest.mark.buildconfigspec('cmd_pinmux')
|
|
def test_pinmux_usage_1(ubman):
|
|
"""Test that 'pinmux' command without parameters displays
|
|
pinmux usage."""
|
|
output = ubman.run_command('pinmux')
|
|
assert 'Usage:' in output
|
|
|
|
@pytest.mark.buildconfigspec('cmd_pinmux')
|
|
def test_pinmux_usage_2(ubman):
|
|
"""Test that 'pinmux status' executed without previous "pinmux dev"
|
|
command displays error message."""
|
|
output = ubman.run_command('pinmux status')
|
|
assert 'pin-controller device not selected' in output
|
|
|
|
@pytest.mark.buildconfigspec('cmd_pinmux')
|
|
@pytest.mark.boardspec('sandbox')
|
|
def test_pinmux_status_all(ubman):
|
|
"""Test that 'pinmux status -a' displays pin's muxing."""
|
|
output = ubman.run_command('pinmux status -a')
|
|
|
|
assert ('pinctrl-gpio:' in output)
|
|
assert ('a5 : gpio output .' in output)
|
|
assert ('a6 : gpio output .' in output)
|
|
|
|
assert ('pinctrl:' in output)
|
|
assert ('P0 : UART TX.' in output)
|
|
assert ('P1 : UART RX.' in output)
|
|
assert ('P2 : I2S SCK.' in output)
|
|
assert ('P3 : I2S SD.' in output)
|
|
assert ('P4 : I2S WS.' in output)
|
|
assert ('P5 : GPIO0 bias-pull-up input-disable.' in output)
|
|
assert ('P6 : GPIO1 drive-open-drain.' in output)
|
|
assert ('P7 : GPIO2 bias-pull-down input-enable.' in output)
|
|
assert ('P8 : GPIO3 bias-disable.' in output)
|
|
|
|
@pytest.mark.buildconfigspec('cmd_pinmux')
|
|
@pytest.mark.boardspec('sandbox')
|
|
def test_pinmux_list(ubman):
|
|
"""Test that 'pinmux list' returns the pin-controller list."""
|
|
output = ubman.run_command('pinmux list')
|
|
assert 'sandbox_pinctrl' in output
|
|
|
|
@pytest.mark.buildconfigspec('cmd_pinmux')
|
|
def test_pinmux_dev_bad(ubman):
|
|
"""Test that 'pinmux dev' returns an error when trying to select a
|
|
wrong pin controller."""
|
|
pincontroller = 'bad_pin_controller_name'
|
|
output = ubman.run_command('pinmux dev ' + pincontroller)
|
|
expected_output = 'Can\'t get the pin-controller: ' + pincontroller + '!'
|
|
assert (expected_output in output)
|
|
|
|
@pytest.mark.buildconfigspec('cmd_pinmux')
|
|
@pytest.mark.boardspec('sandbox')
|
|
def test_pinmux_dev(ubman):
|
|
"""Test that 'pinmux dev' select the wanted pin controller."""
|
|
pincontroller = 'pinctrl'
|
|
output = ubman.run_command('pinmux dev ' + pincontroller)
|
|
expected_output = 'dev: ' + pincontroller
|
|
assert (expected_output in output)
|
|
|
|
@pytest.mark.buildconfigspec('cmd_pinmux')
|
|
@pytest.mark.boardspec('sandbox')
|
|
def test_pinmux_status(ubman):
|
|
"""Test that 'pinmux status' displays selected pincontroller's pin
|
|
muxing descriptions."""
|
|
ubman.run_command('pinmux dev pinctrl')
|
|
output = ubman.run_command('pinmux status')
|
|
|
|
assert (not 'pinctrl-gpio:' in output)
|
|
assert (not 'pinctrl:' in output)
|
|
|
|
assert ('P0 : UART TX.' in output)
|
|
assert ('P1 : UART RX.' in output)
|
|
assert ('P2 : I2S SCK.' in output)
|
|
assert ('P3 : I2S SD.' in output)
|
|
assert ('P4 : I2S WS.' in output)
|
|
assert ('P5 : GPIO0 bias-pull-up input-disable.' in output)
|
|
assert ('P6 : GPIO1 drive-open-drain.' in output)
|
|
assert ('P7 : GPIO2 bias-pull-down input-enable.' in output)
|
|
assert ('P8 : GPIO3 bias-disable.' in output)
|