u-boot/lib/efi_loader/efi_ipconfig.c
Adriano Cordova dd5d82a599 efi_loader: efi_net: Add device path cache
In preparation to support mutiple efi net udevices. Add a device path
cache to support device paths from multiple ethernet udevices.
The device paths can be added to the cache before EFI gets initialized and
the protocols get installed.

Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
2025-03-10 07:02:25 +01:00

216 lines
6.4 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Implementation of EFI_IP4_CONFIG2_PROTOCOL
*
*/
#define LOG_CATEGORY LOGC_EFI
#include <efi_loader.h>
#include <image.h>
#include <malloc.h>
#include <mapmem.h>
#include <net.h>
static const efi_guid_t efi_ip4_config2_guid = EFI_IP4_CONFIG2_PROTOCOL_GUID;
struct efi_ip4_config2_manual_address current_http_ip;
static enum efi_ip4_config2_policy current_policy;
static char current_mac_addr[32];
/* EFI_IP4_CONFIG2_PROTOCOL */
/*
* efi_ip4_config2_set_data() - Set the configuration for the EFI IPv4 network
* stack running on the communication device
*
* This function implements EFI_IP4_CONFIG2_PROTOCOL.SetData()
* See the Unified Extensible Firmware Interface
* (UEFI) specification for details.
*
* @this: pointer to the protocol instance
* @data_type: the type of data to set
* @data_size: size of the buffer pointed to by data in bytes
* @data: the data buffer to set
* Return: status code
*/
static efi_status_t EFIAPI efi_ip4_config2_set_data(struct efi_ip4_config2_protocol *this,
enum efi_ip4_config2_data_type data_type,
efi_uintn_t data_size,
void *data)
{
EFI_ENTRY("%p, %d, %zu, %p", this, data_type, data_size, data);
efi_status_t ret = EFI_SUCCESS;
if (!this || (data && !data_size) || (!data && data_size))
return EFI_EXIT(EFI_INVALID_PARAMETER);
switch (data_type) {
case EFI_IP4_CONFIG2_DATA_TYPE_INTERFACEINFO:
return EFI_EXIT(EFI_WRITE_PROTECTED);
case EFI_IP4_CONFIG2_DATA_TYPE_MANUAL_ADDRESS:
if (current_policy != EFI_IP4_CONFIG2_POLICY_STATIC)
return EFI_EXIT(EFI_WRITE_PROTECTED);
if (!data_size && !data) {
memset((void *)&current_http_ip, 0,
sizeof(current_http_ip));
return EFI_EXIT(EFI_SUCCESS);
}
if (data && data_size == sizeof(struct efi_ip4_config2_manual_address)) {
memcpy((void *)&current_http_ip, data,
sizeof(struct efi_ip4_config2_manual_address));
efi_net_set_addr(&current_http_ip.address,
&current_http_ip.subnet_mask, NULL, NULL);
return EFI_EXIT(EFI_SUCCESS);
}
return EFI_EXIT(EFI_BAD_BUFFER_SIZE);
case EFI_IP4_CONFIG2_DATA_TYPE_POLICY:
if (data && data_size == sizeof(enum efi_ip4_config2_policy)) {
current_policy = *(enum efi_ip4_config2_policy *)data;
return EFI_EXIT(EFI_SUCCESS);
}
return EFI_EXIT(EFI_BAD_BUFFER_SIZE);
default:
return EFI_EXIT(EFI_UNSUPPORTED);
}
return EFI_EXIT(ret);
}
/*
* efi_ip4_config2_get_data() - Get the configuration for the EFI IPv4 network
* stack running on the communication device
*
* This function implements EFI_IP4_CONFIG2_PROTOCOL.GetData()
* See the Unified Extensible Firmware Interface
* (UEFI) specification for details.
*
* @this: pointer to the protocol instance
* @data_type: the type of data to get
* @data_size: size
* @data: the data buffer
* Return: status code
*/
static efi_status_t EFIAPI efi_ip4_config2_get_data(struct efi_ip4_config2_protocol *this,
enum efi_ip4_config2_data_type data_type,
efi_uintn_t *data_size,
void *data)
{
EFI_ENTRY("%p, %d, %p, %p", this, data_type, data_size, data);
efi_status_t ret = EFI_SUCCESS;
struct efi_ip4_config2_interface_info *info;
int tmp;
if (!this || !data_size)
return EFI_EXIT(EFI_INVALID_PARAMETER);
if (*data_size && !data)
return EFI_EXIT(EFI_INVALID_PARAMETER);
tmp = sizeof(struct efi_ip4_config2_interface_info) + sizeof(struct efi_ip4_route_table);
switch (data_type) {
case EFI_IP4_CONFIG2_DATA_TYPE_INTERFACEINFO:
if (*data_size < tmp) {
*data_size = tmp;
return EFI_EXIT(EFI_BUFFER_TOO_SMALL);
}
info = (struct efi_ip4_config2_interface_info *)data;
memset(info, 0, sizeof(*info));
info->hw_address_size = 6;
memcpy(info->hw_address.mac_addr, current_mac_addr, 6);
// Set the route table size
info->route_table_size = 0;
break;
case EFI_IP4_CONFIG2_DATA_TYPE_MANUAL_ADDRESS:
if (*data_size < sizeof(struct efi_ip4_config2_manual_address)) {
*data_size = sizeof(struct efi_ip4_config2_manual_address);
return EFI_EXIT(EFI_BUFFER_TOO_SMALL);
}
efi_net_get_addr(&current_http_ip.address, &current_http_ip.subnet_mask, NULL, NULL);
memcpy(data, (void *)&current_http_ip,
sizeof(struct efi_ip4_config2_manual_address));
break;
default:
return EFI_EXIT(EFI_NOT_FOUND);
}
return EFI_EXIT(ret);
}
/*
* efi_ip4_config2_register_notify() - Register an event that is to be signaled whenever
* a configuration process on the specified configuration
* data is done
*
* This function implements EFI_IP4_CONFIG2_PROTOCOL.RegisterDataNotify()
* See the Unified Extensible Firmware Interface
* (UEFI) specification for details.
*
* @this: pointer to the protocol instance
* @data_type: the type of data to register the event for
* @event: the event to register
* Return: status code
*/
static efi_status_t EFIAPI efi_ip4_config2_register_notify(struct efi_ip4_config2_protocol *this,
enum efi_ip4_config2_data_type data_type,
struct efi_event *event)
{
EFI_ENTRY("%p, %d, %p", this, data_type, event);
return EFI_EXIT(EFI_UNSUPPORTED);
}
/*
* efi_ip4_config2_unregister_notify() - Remove a previously registered eventfor
* the specified configuration data
*
* This function implements EFI_IP4_CONFIG2_PROTOCOL.UnregisterDataNotify()
* See the Unified Extensible Firmware Interface
* (UEFI) specification for details.
*
* @this: pointer to the protocol instance
* @data_type: the type of data to remove the event for
* @event: the event to unregister
* Return: status code
*/
static efi_status_t EFIAPI efi_ip4_config2_unregister_notify(struct efi_ip4_config2_protocol *this,
enum efi_ip4_config2_data_type data_type,
struct efi_event *event)
{
EFI_ENTRY("%p, %d, %p", this, data_type, event);
return EFI_EXIT(EFI_UNSUPPORTED);
}
/**
* efi_ipconfig_register() - register the ip4_config2 protocol
*
*/
efi_status_t efi_ipconfig_register(const efi_handle_t handle,
struct efi_ip4_config2_protocol *ip4config)
{
efi_status_t r = EFI_SUCCESS;
r = efi_add_protocol(handle, &efi_ip4_config2_guid,
ip4config);
if (r != EFI_SUCCESS) {
log_err("ERROR: Failure to add protocol\n");
return r;
}
memcpy(current_mac_addr, eth_get_ethaddr(), 6);
ip4config->set_data = efi_ip4_config2_set_data;
ip4config->get_data = efi_ip4_config2_get_data;
ip4config->register_data_notify = efi_ip4_config2_register_notify;
ip4config->unregister_data_notify = efi_ip4_config2_unregister_notify;
return EFI_SUCCESS;
}