mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-11 07:24:46 +00:00
c7360f17fb
Board introductions have a feature list which isn't formatted properly according to rST and is thus rendered incorrectly. Fix this by adding the missing newlines in the appropriate places. Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
109 lines
3.1 KiB
ReStructuredText
109 lines
3.1 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
SOM-RK3588-Q7 Tiger
|
|
===================
|
|
|
|
The RK3588-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
|
|
connector) system-on-module from Theobroma Systems, featuring the
|
|
Rockchip RK3588.
|
|
|
|
It provides the following feature set:
|
|
|
|
* up to 16GB LPDDR4x
|
|
* on-module eMMC
|
|
* SD card (on a baseboard) via edge connector
|
|
* Gigabit Ethernet with on-module GbE PHY
|
|
* HDMI/eDP
|
|
* MIPI-DSI
|
|
* 4x MIPI-CSI (3x on FPC connectors, 1x over Q7)
|
|
* HDMI input over FPC connector
|
|
* CAN
|
|
* USB
|
|
|
|
- 1x USB 3.0 dual-role (direct connection)
|
|
- 2x USB 3.0 host + 1x USB 2.0 host
|
|
|
|
* PCIe
|
|
|
|
- 1x PCIe 2.1 Gen3, 4 lanes
|
|
- 2xSATA / 2x PCIe 2.1 Gen1, 2 lanes
|
|
|
|
* on-module ATtiny816 companion controller, implementing:
|
|
|
|
- low-power RTC functionality (ISL1208 emulation)
|
|
- fan controller (AMC6821 emulation)
|
|
|
|
* on-module Secure Element with Global Platform 2.2.1 compliant
|
|
JavaCard environment
|
|
|
|
Here is the step-by-step to boot to U-Boot on SOM-RK3588-Q7 Tiger from Theobroma
|
|
Systems.
|
|
|
|
Get the TF-A and DDR init (TPL) binaries
|
|
----------------------------------------
|
|
|
|
.. prompt:: bash
|
|
|
|
git clone https://github.com/rockchip-linux/rkbin
|
|
cd rkbin
|
|
export RKBIN=$(pwd)
|
|
export BL31=$RKBIN/bin/rk35/rk3588_bl31_v1.38.elf
|
|
export ROCKCHIP_TPL=$RKBIN/bin/rk35/rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin
|
|
sed -i 's/^uart baudrate=.*$/uart baudrate=115200/' tools/ddrbin_param.txt
|
|
sed -i 's/^uart iomux=.*$/uart iomux=2/' tools/ddrbin_param.txt
|
|
./tools/ddrbin_tool tools/ddrbin_param.txt "$ROCKCHIP_TPL"
|
|
./tools/boot_merger RKBOOT/RK3588MINIALL.ini
|
|
export RKDB=$RKBIN/rk3588_spl_loader_v1.11.112.bin
|
|
|
|
This will setup all required external dependencies for compiling U-Boot. This will
|
|
be updated in the future once upstream Trusted-Firmware-A supports RK3588 or U-Boot
|
|
gains support for open-source DRAM initialization in TPL.
|
|
|
|
Build U-Boot
|
|
------------
|
|
|
|
.. prompt:: bash
|
|
|
|
cd ../u-boot
|
|
make CROSS_COMPILE=aarch64-linux-gnu- tiger-rk3588_defconfig all
|
|
|
|
This will build ``u-boot-rockchip.bin`` which can be written to an MMC device
|
|
(eMMC or SD card).
|
|
|
|
Flash the image
|
|
---------------
|
|
|
|
Copy ``u-boot-rockchip.bin`` to offset 32k for SD/eMMC.
|
|
|
|
SD-Card
|
|
~~~~~~~
|
|
|
|
.. prompt:: bash
|
|
|
|
dd if=u-boot-rockchip.bin of=/dev/sdX seek=64
|
|
|
|
.. note::
|
|
|
|
Replace ``/dev/sdX`` to match your SD card kernel device.
|
|
|
|
eMMC
|
|
~~~~
|
|
|
|
``rkdeveloptool`` allows to flash the on-board eMMC via the USB OTG interface
|
|
with help of the Rockchip loader binary.
|
|
|
|
To enter the USB flashing mode on Haikou baseboard, remove any SD card, insert a
|
|
micro-USB cable in the ``Q7 USB P1`` connector (P8), move ``SW5`` switch into
|
|
``BIOS Disable`` mode, power cycle or reset the board and move ``SW5`` switch
|
|
back to ``Normal Boot`` mode. A new USB device should have appeared on your PC
|
|
(check with ``lsusb -d 2207:350b``).
|
|
|
|
To flash U-Boot on the eMMC with ``rkdeveloptool``:
|
|
|
|
.. prompt:: bash
|
|
|
|
git clone https://github.com/rockchip-linux/rkdeveloptool
|
|
cd rkdeveloptool
|
|
autoreconf -i && CPPFLAGS=-Wno-format-truncation ./configure && make
|
|
./rkdeveloptool db "$RKDB"
|
|
./rkdeveloptool wl 64 ../u-boot-rockchip.bin
|