mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-17 02:15:02 +00:00
100f489f58
When RK3399 boards run SPL from eMMC and fail to load FIT from eMMC due to it being missing or checksum validation fails there can be a fallback to read FIT from SD-card. However, without proper pinctrl configuration reading FIT from SD-card may fail: U-Boot SPL 2024.04-rc4 (Mar 17 2024 - 22:54:45 +0000) Trying to boot from MMC2 mmc_load_image_raw_sector: mmc block read error Trying to boot from MMC2 mmc_load_image_raw_sector: mmc block read error Trying to boot from MMC1 Card did not respond to voltage select! : -110 mmc_init: -95, time 12 spl: mmc init failed with error: -95 SPL: failed to boot from all boot devices (err=-6) ### ERROR ### Please RESET the board ### Fix this by tagging related sdhci, sdmmc and spi flash pinctrl nodes with bootph props. Also move bootph for common nodes shared by all boards to the SoC u-boot.dtsi. eMMC, SD-Card and SPI flash nodes are also changed to only be tagged with bootph props for SPL and U-Boot pre-reloc phases. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
31 lines
615 B
Text
31 lines
615 B
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
|
|
*/
|
|
|
|
#include "rk3399-u-boot.dtsi"
|
|
#include "rk3399-sdram-lpddr3-2GB-1600.dtsi"
|
|
|
|
/ {
|
|
vdd_log: vdd-log {
|
|
compatible = "pwm-regulator";
|
|
pwms = <&pwm2 0 25000 1>;
|
|
regulator-name = "vdd_log";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-init-microvolt = <950000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
};
|
|
|
|
&pcfg_pull_none_18ma {
|
|
bootph-pre-ram;
|
|
bootph-some-ram;
|
|
};
|
|
|
|
&pcfg_pull_up_8ma {
|
|
bootph-pre-ram;
|
|
bootph-some-ram;
|
|
};
|