Djam/u-boot
1
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2025-04-16 09:54:35 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
u-boot/arch/arm/dts/sun50i-a64-olinuxino.dts
Andre Przywara 70fc84493c sunxi: dts: arm/arm64: update devicetree files from Linux-v6.10 
Sync the devicetree files from the official Linux kernel tree, v6.10.
This is covering Allwinner SoCs with 32-bit and 64-bit ARM cores.

Besides mostly cosmectic changes, this adds cpufreq support to H616
boards, Nothing that U-Boot needs for itself, but helpful to pass on
to kernels. We also get the .dts files for the Tanix TX1 TV box and
three Anbernic handheld gaming devices.

As before, this omits the non-backwards compatible changes to the R_INTC
controller, to remain compatible with older kernels.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2024-08-06 00:19:57 +01:00

377 lines
6.9 KiB
Text
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
/dts-v1/;
#include "sun50i-a64.dtsi"
#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Olimex A64-Olinuxino";
compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
led-0 {
label = "a64-olinuxino:red:user";
gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
};
};
reg_usb1_vbus: usb1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
status = "okay";
};
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
};
&codec {
status = "okay";
};
&codec_analog {
cpvdd-supply = <&reg_eldo1>;
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&cpu1 {
cpu-supply = <&reg_dcdc2>;
};
&cpu2 {
cpu-supply = <&reg_dcdc2>;
};
&cpu3 {
cpu-supply = <&reg_dcdc2>;
};
&dai {
status = "okay";
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dcdc1>;
allwinner,tx-delay-ps = <600>;
status = "okay";
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
disable-wp;
bus-width = <4>;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_dldo4>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
rtl8723bs: wifi@1 {
reg = <1>;
interrupt-parent = <&r_pio>;
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
interrupt-names = "host-wake";
};
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&pio {
vcc-pc-supply = <&reg_dcdc1>;
vcc-pd-supply = <&reg_dcdc1>;
vcc-pe-supply = <&reg_aldo1>;
vcc-pg-supply = <&reg_dldo4>;
};
&r_pio {
/*
* FIXME: We can't add that supply for now since it would
* create a circular dependency between pinctrl, the regulator
* and the RSB Bus.
*
* vcc-pl-supply = <&reg_aldo2>;
*/
};
&pio {
vcc-pa-supply = <&reg_dcdc1>;
vcc-pb-supply = <&reg_dcdc1>;
vcc-pc-supply = <&reg_dcdc1>;
vcc-pd-supply = <&reg_dcdc1>;
vcc-pe-supply = <&reg_aldo1>;
vcc-pf-supply = <&reg_dcdc1>;
vcc-pg-supply = <&reg_dldo4>;
vcc-ph-supply = <&reg_dcdc1>;
};
&r_rsb {
status = "okay";
axp803: pmic@3a3 {
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
};
};
/* VCC-PL is powered by aldo2 but we cannot add it as the RSB */
/* interface used to talk to the PMIC in on the PL pins */
/* &r_pio { */
/* vcc-pl-supply = <&reg_aldo2>; */
/* }; */
#include "axp803.dtsi"
&ac_power_supply {
status = "okay";
};
&battery_power_supply {
status = "okay";
};
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "vcc-pe";
};
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1040000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpux";
};
/* DCDC3 is polyphased with DCDC2 */
/*
* The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
* 1.35V that the PMIC can drive.
*/
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1360000>;
regulator-max-microvolt = <1360000>;
regulator-name = "vcc-ddr3";
};
&reg_dcdc6 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-hdmi";
};
&reg_dldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-mipi";
};
&reg_dldo3 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "vcc-avdd-csi";
};
&reg_dldo4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-io";
};
&reg_drivevbus {
regulator-name = "usb0-vbus";
status = "okay";
};
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
&reg_eldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-dvdd-csi";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-1v2-hsic";
};
/*
* The A64 chip cannot work without this regulator off, although
* it seems to be only driving the AR100 core.
* Maybe we don't still know well about CPUs domain.
*/
&reg_fldo2 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpus";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&simplefb_hdmi {
vcc-hdmi-supply = <&reg_dldo1>;
};
&sound {
simple-audio-card,aux-devs = <&codec_analog>;
simple-audio-card,widgets = "Microphone", "Microphone Jack Left",
"Microphone", "Microphone Jack Right",
"Headphone", "Headphone Jack";
simple-audio-card,routing = "Left DAC", "DACL",
"Right DAC", "DACR",
"Headphone Jack", "HP",
"ADCL", "Left ADC",
"ADCR", "Right ADC",
"Microphone Jack Left", "MBIAS",
"MIC1", "Microphone Jack Left",
"Microphone Jack Right", "MBIAS",
"MIC2", "Microphone Jack Right";
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
status = "okay";
usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
};
Reference in a new issue View git blame Copy permalink