Djam/u-boot
1
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2025-04-17 02:15:02 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
u-boot/arch/arm/dts/exynos5250-snow.dts
Sam Protsenko 4a29c0d36b arm: dts: exynos: Remove outdated DW MMC properties in all Exynos dts 
Upstream properties were added to device trees to follow current Linux
kernel. DW MMC driver was updated accordingly. Safely remove outdated
MMC properties. Details on removed properties are as follows:

* samsung,removable: replaced by non-removable
* samsung,bus-width: replaced by bus-width
* samsung,timing:
  - replaced by samsung,dw-mshc-ciu-div and samsung,dw-mshc-sdr-timing
    in dw_mmc nodes
  - removed from sdhci nodes (it's neither described in bindings, nor
    it's used in s5p_sdhci.c driver)
* fifoth_val: replaced by fifo-depth
* bus_hz: replaced by clock-frequency
* div: the fixed CIU clock divider value was moved to the chip data in
  exynos_dw_mmc.c driver

No functional change.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2024-08-19 16:09:06 +09:00

554 lines
11 KiB
Text
Raw Blame History

/*
* SAMSUNG Snow board device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
/ {
model = "Google Snow";
compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
aliases {
i2c0 = "/i2c@12C60000";
i2c1 = "/i2c@12C70000";
i2c2 = "/i2c@12C80000";
i2c3 = "/i2c@12C90000";
i2c4 = "/i2c@12CA0000";
i2c104 = &i2c_104;
i2c5 = "/i2c@12CB0000";
i2c6 = "/i2c@12CC0000";
i2c7 = "/i2c@12CD0000";
spi0 = "/spi@12d20000";
spi1 = "/spi@12d30000";
spi2 = "/spi@12d40000";
spi3 = "/spi@131a0000";
spi4 = "/spi@131b0000";
mmc0 = "/mmc@12200000";
mmc1 = "/mmc@12210000";
mmc2 = "/mmc@12220000";
mmc3 = "/mmc@12230000";
serial0 = "/serial@12C30000";
console = "/serial@12C30000";
};
memory {
reg = <0x40000000 0x80000000>;
};
chosen {
bootargs = "console=tty1";
stdout-path = "serial3:115200n8";
};
iram {
reg = <0x02020000 0x60000>;
};
config {
samsung,bl1-offset = <0x1400>;
samsung,bl2-offset = <0x3400>;
u-boot-memory = "/memory";
u-boot-offset = <0x3e00000 0x100000>;
};
flash {
reg = <0 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
pre-boot {
label = "bl1 pre-boot";
reg = <0 0x2000>;
read-only;
filename = "e5250.nbl1.bin";
type = "blob exynos-bl1";
required;
};
spl {
label = "bl2 spl";
reg = <0x2000 0x4000>;
read-only;
filename = "bl2.bin";
type = "blob exynos-bl2 boot,dtb";
payload = "/flash/ro-boot";
required;
};
ro-boot {
label = "u-boot";
reg = <0x6000 0xb0000>;
read-only;
type = "blob boot,dtb";
required;
};
};
i2c-arbitrator {
compatible = "i2c-arb-gpio-challenge";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&{/i2c@12CA0000}>;
our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
slew-delay-us = <10>;
wait-retry-us = <3000>;
wait-free-us = <50000>;
/* Use ID 104 as a hint that we're on physical bus 4 */
i2c_104: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
battery: sbs-battery@b {
compatible = "sbs,sbs-battery";
reg = <0xb>;
sbs,poll-retry-count = <1>;
};
cros_ec: embedded-controller {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
interrupts = <6 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
wakeup-source;
i2c-max-frequency = <100000>;
u-boot,i2c-offset-len = <0>;
ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
};
power-regulator {
compatible = "ti,tps65090";
reg = <0x48>;
regulators {
dcdc1 {
ti,enable-ext-control;
};
dcdc2 {
ti,enable-ext-control;
};
dcdc3 {
ti,enable-ext-control;
};
fet1: fet1 {
regulator-name = "vcd_led";
ti,overcurrent-wait = <3>;
};
tps65090_fet2: fet2 {
regulator-name = "video_mid";
regulator-always-on;
ti,overcurrent-wait = <3>;
};
fet3 {
regulator-name = "wwan_r";
regulator-always-on;
ti,overcurrent-wait = <3>;
};
fet4 {
regulator-name = "sdcard";
ti,overcurrent-wait = <3>;
};
fet5 {
regulator-name = "camout";
regulator-always-on;
ti,overcurrent-wait = <3>;
};
fet6: fet6 {
regulator-name = "lcd_vdd";
ti,overcurrent-wait = <3>;
};
tps65090_fet7: fet7 {
regulator-name = "video_mid_1a";
regulator-always-on;
ti,overcurrent-wait = <3>;
};
ldo1 {
};
ldo2 {
};
};
charger {
compatible = "ti,tps65090-charger";
};
};
};
};
i2c@12CD0000 {
ptn3460: lvds-bridge@20 {
compatible = "nxp,ptn3460";
reg = <0x20>;
sleep-gpios = <&gpy2 5 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
hotplug-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
edid-emulation = <5>;
ports {
port@0 {
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
port@1 {
bridge_in: endpoint {
remote-endpoint = <&dp_out>;
};
};
};
};
max98095: codec@11 {
compatible = "maxim,max98095";
reg = <0x11>;
#sound-dai-cells = <1>;
};
};
i2c@12C90000 {
clock-frequency = <100000>;
tpm@20 {
reg = <0x20>;
u-boot,i2c-offset-len = <0>;
compatible = "infineon,slb9635tt";
};
};
spi@12d30000 {
spi-max-frequency = <50000000>;
firmware_storage_spi: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
};
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
default-brightness-level = <7>;
enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
power-supply = <&fet1>;
};
panel: panel {
compatible = "auo,b116xw03";
power-supply = <&fet6>;
backlight = <&backlight>;
port {
panel_in: endpoint {
remote-endpoint = <&bridge_out>;
};
};
};
spi@131b0000 {
spi-max-frequency = <1000000>;
spi-deactivate-delay = <100>;
/* Snow did support SPI but the released version used I2C */
embedded-controller {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
spi-max-frequency = <5000000>;
ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
optimise-flash-write;
status = "disabled";
};
};
sound {
compatible = "google,snow-audio-max98095";
samsung,model = "Snow-I2S-MAX98095";
samsung,audio-codec = <&max98095>;
codec-enable-gpio = <&gpx1 7 GPIO_ACTIVE_HIGH>;
cpu {
sound-dai = <&i2s0 0>;
};
codec {
sound-dai = <&max98095 0>;
};
};
sound@12d60000 {
status = "disabled";
};
i2c@12C60000 {
max77686@09 {
reg = <0x9>;
compatible = "maxim,max77686";
};
};
mmc@12200000 {
bus-width = <8>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <1 3>;
non-removable;
};
mmc@12210000 {
status = "disabled";
};
mmc@12220000 {
bus-width = <4>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <1 2>;
};
mmc@12230000 {
status = "disabled";
};
ehci@12110000 {
samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
xhci@12000000 {
samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
};
tmu@10060000 {
samsung,min-temp = <25>;
samsung,max-temp = <125>;
samsung,start-warning = <95>;
samsung,start-tripping = <105>;
samsung,hw-tripping = <110>;
samsung,efuse-min-value = <40>;
samsung,efuse-value = <55>;
samsung,efuse-max-value = <100>;
samsung,slope = <274761730>;
samsung,dc-value = <25>;
};
fimd@14400000 {
samsung,vl-freq = <60>;
samsung,vl-col = <1366>;
samsung,vl-row = <768>;
samsung,vl-width = <1366>;
samsung,vl-height = <768>;
samsung,vl-clkp;
samsung,vl-dp;
samsung,vl-hsp;
samsung,vl-vsp;
samsung,vl-bpix = <4>;
samsung,vl-hspw = <32>;
samsung,vl-hbpd = <80>;
samsung,vl-hfpd = <48>;
samsung,vl-vspw = <5>;
samsung,vl-vbpd = <14>;
samsung,vl-vfpd = <3>;
samsung,vl-cmd-allow-len = <0xf>;
samsung,winid = <0>;
samsung,interface-mode = <1>;
samsung,dp-enabled = <1>;
samsung,dual-lcd-enabled = <0>;
};
dp@145b0000 {
samsung,lt-status = <0>;
samsung,master-mode = <0>;
samsung,bist-mode = <0>;
samsung,bist-pattern = <0>;
samsung,h-sync-polarity = <0>;
samsung,v-sync-polarity = <0>;
samsung,interlaced = <0>;
samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
dp_out: endpoint {
remote-endpoint = <&bridge_in>;
};
};
};
};
};
&i2c_0 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
max77686: max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_NONE>;
wakeup-source;
reg = <0x09>;
#clock-cells = <1>;
voltage-regulators {
ldo1_reg: LDO1 {
regulator-name = "P1.0V_LDO_OUT1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo2_reg: LDO2 {
regulator-name = "P1.8V_LDO_OUT2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "P1.8V_LDO_OUT3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo7_reg: LDO7 {
regulator-name = "P1.1V_LDO_OUT7";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
ldo8_reg: LDO8 {
regulator-name = "P1.0V_LDO_OUT8";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo10_reg: LDO10 {
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo12_reg: LDO12 {
regulator-name = "P3.0V_LDO_OUT12";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
ldo14_reg: LDO14 {
regulator-name = "P1.8V_LDO_OUT14";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo15_reg: LDO15 {
regulator-name = "P1.0V_LDO_OUT15";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo16_reg: LDO16 {
regulator-name = "P1.8V_LDO_OUT16";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo17_reg: LDO17 {
regulator-name = "vdd_mydp";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck5_reg: BUCK5 {
regulator-name = "P1.8V_BUCK_OUT5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
buck6_reg: BUCK6 {
regulator-name = "P1.35V_BUCK_OUT6";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
buck7_reg: BUCK7 {
regulator-name = "P2.0V_BUCK_OUT7";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
buck8_reg: BUCK8 {
regulator-name = "P2.85V_BUCK_OUT8";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
};
};
};
#include "cros-ec-keyboard.dtsi"
Reference in a new issue View git blame Copy permalink