mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-18 10:54:37 +00:00
70fc84493c
Sync the devicetree files from the official Linux kernel tree, v6.10. This is covering Allwinner SoCs with 32-bit and 64-bit ARM cores. Besides mostly cosmectic changes, this adds cpufreq support to H616 boards, Nothing that U-Boot needs for itself, but helpful to pass on to kernels. We also get the .dts files for the Tanix TX1 TV box and three Anbernic handheld gaming devices. As before, this omits the non-backwards compatible changes to the R_INTC controller, to remain compatible with older kernels. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
334 lines
6.4 KiB
Text
334 lines
6.4 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
|
|
|
|
/dts-v1/;
|
|
|
|
#include "sun50i-h6.dtsi"
|
|
#include "sun50i-h6-cpu-opp.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "Pine H64 model A";
|
|
compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
|
|
|
|
aliases {
|
|
ethernet0 = &emac;
|
|
serial0 = &uart0;
|
|
spi0 = &spi0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
ext_osc32k: ext-osc32k-clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "ext_osc32k";
|
|
};
|
|
|
|
hdmi_connector: connector {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
|
|
|
|
port {
|
|
hdmi_con_in: endpoint {
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
label = "pine-h64:green:heartbeat";
|
|
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
|
|
};
|
|
|
|
led-1 {
|
|
label = "pine-h64:white:link";
|
|
gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */
|
|
};
|
|
|
|
led-2 {
|
|
label = "pine-h64:blue:status";
|
|
gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
|
|
};
|
|
};
|
|
|
|
reg_gmac_3v3: gmac-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc-gmac-3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <100000>;
|
|
gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usb_vbus: vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb-vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
startup-delay-us = <100000>;
|
|
gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <®_dcdca>;
|
|
};
|
|
|
|
&de {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&emac {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ext_rgmii_pins>;
|
|
phy-mode = "rgmii-id";
|
|
phy-handle = <&ext_rgmii_phy>;
|
|
phy-supply = <®_gmac_3v3>;
|
|
allwinner,rx-delay-ps = <200>;
|
|
allwinner,tx-delay-ps = <200>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <®_dcdcc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_out {
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
ext_rgmii_phy: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
vmmc-supply = <®_cldo1>;
|
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc2 {
|
|
vmmc-supply = <®_cldo1>;
|
|
vqmmc-supply = <®_bldo2>;
|
|
non-removable;
|
|
cap-mmc-hw-reset;
|
|
mmc-hs200-1_8v;
|
|
bus-width = <8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pio {
|
|
vcc-pc-supply = <®_bldo2>;
|
|
vcc-pd-supply = <®_cldo1>;
|
|
vcc-pg-supply = <®_aldo1>;
|
|
};
|
|
|
|
&r_i2c {
|
|
status = "okay";
|
|
|
|
axp805: pmic@36 {
|
|
compatible = "x-powers,axp805", "x-powers,axp806";
|
|
reg = <0x36>;
|
|
interrupt-parent = <&r_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
x-powers,self-working-mode;
|
|
|
|
regulators {
|
|
reg_aldo1: aldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-pl";
|
|
};
|
|
|
|
reg_aldo2: aldo2 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-ac200";
|
|
regulator-enable-ramp-delay = <100000>;
|
|
};
|
|
|
|
reg_aldo3: aldo3 {
|
|
/* This regulator is connected with CLDO1 */
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-3v3-1";
|
|
};
|
|
|
|
reg_bldo1: bldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-bias-pll";
|
|
};
|
|
|
|
reg_bldo2: bldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-efuse-pcie-hdmi-io";
|
|
};
|
|
|
|
reg_bldo3: bldo3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-dcxoio";
|
|
};
|
|
|
|
bldo4 {
|
|
/* unused */
|
|
};
|
|
|
|
reg_cldo1: cldo1 {
|
|
/* This regulator is connected with ALDO3 */
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-3v3-2";
|
|
};
|
|
|
|
reg_cldo2: cldo2 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi-1";
|
|
};
|
|
|
|
reg_cldo3: cldo3 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi-2";
|
|
};
|
|
|
|
reg_dcdca: dcdca {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <810000>;
|
|
regulator-max-microvolt = <1160000>;
|
|
regulator-ramp-delay = <2500>;
|
|
regulator-name = "vdd-cpu";
|
|
};
|
|
|
|
reg_dcdcc: dcdcc {
|
|
regulator-enable-ramp-delay = <32000>;
|
|
regulator-min-microvolt = <810000>;
|
|
regulator-max-microvolt = <1080000>;
|
|
regulator-ramp-delay = <2500>;
|
|
regulator-name = "vdd-gpu";
|
|
};
|
|
|
|
reg_dcdcd: dcdcd {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <960000>;
|
|
regulator-max-microvolt = <960000>;
|
|
regulator-name = "vdd-sys";
|
|
};
|
|
|
|
reg_dcdce: dcdce {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-dram";
|
|
};
|
|
|
|
sw {
|
|
/* unused */
|
|
};
|
|
};
|
|
};
|
|
|
|
pcf8563: rtc@51 {
|
|
compatible = "nxp,pcf8563";
|
|
reg = <0x51>;
|
|
interrupt-parent = <&r_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&r_ir {
|
|
status = "okay";
|
|
};
|
|
|
|
&r_pio {
|
|
vcc-pm-supply = <®_aldo1>;
|
|
};
|
|
|
|
&rtc {
|
|
clocks = <&ext_osc32k>;
|
|
};
|
|
|
|
/*
|
|
* The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI
|
|
* flash and eMMC at the same time, as one of them would fail probing.
|
|
* Disable SPI0 in here, to prefer the more useful eMMC. U-Boot can
|
|
* fix this up in no eMMC is connected.
|
|
*/
|
|
&spi0 {
|
|
pinctrl-0 = <&spi0_pins>, <&spi0_cs_pin>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
|
|
flash@0 {
|
|
compatible = "winbond,w25q128", "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <4000000>;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_ph_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2otg {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy {
|
|
usb0_vbus-supply = <®_usb_vbus>;
|
|
usb3_vbus-supply = <®_usb_vbus>;
|
|
status = "okay";
|
|
};
|