mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-18 10:54:37 +00:00

Now that we have time conversion defines from in time.h there is no need for each driver to define their own version. Signed-off-by: Igor Prusov <ivprusov@salutedevices.com> Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com> # tegra Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com> #at91 Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> #qcom geni Reviewed-by: Stefan Bosch <stefan_b@posteo.net> #nanopi2 Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
860 lines
22 KiB
C
860 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2013 NVIDIA Corporation
|
|
* Copyright (c) 2022 Svyatoslav Ryhel <clamor95@gmail.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <misc.h>
|
|
#include <mipi_display.h>
|
|
#include <mipi_dsi.h>
|
|
#include <backlight.h>
|
|
#include <panel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/time.h>
|
|
#include <power/regulator.h>
|
|
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/display.h>
|
|
#include <asm/arch-tegra30/dsi.h>
|
|
|
|
#include "mipi-phy.h"
|
|
|
|
struct tegra_dsi_priv {
|
|
struct mipi_dsi_host host;
|
|
struct mipi_dsi_device device;
|
|
struct mipi_dphy_timing dphy_timing;
|
|
|
|
struct udevice *panel;
|
|
struct display_timing timing;
|
|
|
|
struct dsi_ctlr *dsi;
|
|
struct udevice *avdd;
|
|
|
|
enum tegra_dsi_format format;
|
|
|
|
int dsi_clk;
|
|
int video_fifo_depth;
|
|
int host_fifo_depth;
|
|
};
|
|
|
|
static void tegra_dc_enable_controller(struct udevice *dev)
|
|
{
|
|
struct tegra_dc_plat *dc_plat = dev_get_plat(dev);
|
|
struct dc_ctlr *dc = dc_plat->dc;
|
|
u32 value;
|
|
|
|
value = readl(&dc->disp.disp_win_opt);
|
|
value |= DSI_ENABLE;
|
|
writel(value, &dc->disp.disp_win_opt);
|
|
|
|
writel(GENERAL_UPDATE, &dc->cmd.state_ctrl);
|
|
writel(GENERAL_ACT_REQ, &dc->cmd.state_ctrl);
|
|
}
|
|
|
|
static const char * const error_report[16] = {
|
|
"SoT Error",
|
|
"SoT Sync Error",
|
|
"EoT Sync Error",
|
|
"Escape Mode Entry Command Error",
|
|
"Low-Power Transmit Sync Error",
|
|
"Peripheral Timeout Error",
|
|
"False Control Error",
|
|
"Contention Detected",
|
|
"ECC Error, single-bit",
|
|
"ECC Error, multi-bit",
|
|
"Checksum Error",
|
|
"DSI Data Type Not Recognized",
|
|
"DSI VC ID Invalid",
|
|
"Invalid Transmission Length",
|
|
"Reserved",
|
|
"DSI Protocol Violation",
|
|
};
|
|
|
|
static ssize_t tegra_dsi_read_response(struct dsi_misc_reg *misc,
|
|
const struct mipi_dsi_msg *msg,
|
|
size_t count)
|
|
{
|
|
u8 *rx = msg->rx_buf;
|
|
unsigned int i, j, k;
|
|
size_t size = 0;
|
|
u16 errors;
|
|
u32 value;
|
|
|
|
/* read and parse packet header */
|
|
value = readl(&misc->dsi_rd_data);
|
|
|
|
switch (value & 0x3f) {
|
|
case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
|
|
errors = (value >> 8) & 0xffff;
|
|
printf("%s: Acknowledge and error report: %04x\n",
|
|
__func__, errors);
|
|
for (i = 0; i < ARRAY_SIZE(error_report); i++)
|
|
if (errors & BIT(i))
|
|
printf("%s: %2u: %s\n", __func__, i,
|
|
error_report[i]);
|
|
break;
|
|
|
|
case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
|
|
rx[0] = (value >> 8) & 0xff;
|
|
size = 1;
|
|
break;
|
|
|
|
case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
|
|
rx[0] = (value >> 8) & 0xff;
|
|
rx[1] = (value >> 16) & 0xff;
|
|
size = 2;
|
|
break;
|
|
|
|
case MIPI_DSI_RX_DCS_LONG_READ_RESPONSE:
|
|
size = ((value >> 8) & 0xff00) | ((value >> 8) & 0xff);
|
|
break;
|
|
|
|
case MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE:
|
|
size = ((value >> 8) & 0xff00) | ((value >> 8) & 0xff);
|
|
break;
|
|
|
|
default:
|
|
printf("%s: unhandled response type: %02x\n",
|
|
__func__, value & 0x3f);
|
|
return -EPROTO;
|
|
}
|
|
|
|
size = min(size, msg->rx_len);
|
|
|
|
if (msg->rx_buf && size > 0) {
|
|
for (i = 0, j = 0; i < count - 1; i++, j += 4) {
|
|
u8 *rx = msg->rx_buf + j;
|
|
|
|
value = readl(&misc->dsi_rd_data);
|
|
|
|
for (k = 0; k < 4 && (j + k) < msg->rx_len; k++)
|
|
rx[j + k] = (value >> (k << 3)) & 0xff;
|
|
}
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
static int tegra_dsi_transmit(struct dsi_misc_reg *misc,
|
|
unsigned long timeout)
|
|
{
|
|
writel(DSI_TRIGGER_HOST, &misc->dsi_trigger);
|
|
|
|
while (timeout--) {
|
|
u32 value = readl(&misc->dsi_trigger);
|
|
|
|
if ((value & DSI_TRIGGER_HOST) == 0)
|
|
return 0;
|
|
|
|
udelay(1000);
|
|
}
|
|
|
|
debug("timeout waiting for transmission to complete\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int tegra_dsi_wait_for_response(struct dsi_misc_reg *misc,
|
|
unsigned long timeout)
|
|
{
|
|
while (timeout--) {
|
|
u32 value = readl(&misc->dsi_status);
|
|
u8 count = value & 0x1f;
|
|
|
|
if (count > 0)
|
|
return count;
|
|
|
|
udelay(1000);
|
|
}
|
|
|
|
debug("peripheral returned no data\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void tegra_dsi_writesl(struct dsi_misc_reg *misc,
|
|
const void *buffer, size_t size)
|
|
{
|
|
const u8 *buf = buffer;
|
|
size_t i, j;
|
|
u32 value;
|
|
|
|
for (j = 0; j < size; j += 4) {
|
|
value = 0;
|
|
|
|
for (i = 0; i < 4 && j + i < size; i++)
|
|
value |= buf[j + i] << (i << 3);
|
|
|
|
writel(value, &misc->dsi_wr_data);
|
|
}
|
|
}
|
|
|
|
static ssize_t tegra_dsi_host_transfer(struct mipi_dsi_host *host,
|
|
const struct mipi_dsi_msg *msg)
|
|
{
|
|
struct udevice *dev = (struct udevice *)host->dev;
|
|
struct tegra_dsi_priv *priv = dev_get_priv(dev);
|
|
struct dsi_misc_reg *misc = &priv->dsi->misc;
|
|
struct mipi_dsi_packet packet;
|
|
const u8 *header;
|
|
size_t count;
|
|
ssize_t err;
|
|
u32 value;
|
|
|
|
err = mipi_dsi_create_packet(&packet, msg);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
header = packet.header;
|
|
|
|
/* maximum FIFO depth is 1920 words */
|
|
if (packet.size > priv->video_fifo_depth * 4)
|
|
return -ENOSPC;
|
|
|
|
/* reset underflow/overflow flags */
|
|
value = readl(&misc->dsi_status);
|
|
if (value & (DSI_STATUS_UNDERFLOW | DSI_STATUS_OVERFLOW)) {
|
|
value = DSI_HOST_CONTROL_FIFO_RESET;
|
|
writel(value, &misc->host_dsi_ctrl);
|
|
udelay(10);
|
|
}
|
|
|
|
value = readl(&misc->dsi_pwr_ctrl);
|
|
value |= DSI_POWER_CONTROL_ENABLE;
|
|
writel(value, &misc->dsi_pwr_ctrl);
|
|
|
|
mdelay(5);
|
|
|
|
value = DSI_HOST_CONTROL_CRC_RESET | DSI_HOST_CONTROL_TX_TRIG_HOST |
|
|
DSI_HOST_CONTROL_CS | DSI_HOST_CONTROL_ECC;
|
|
|
|
/*
|
|
* The host FIFO has a maximum of 64 words, so larger transmissions
|
|
* need to use the video FIFO.
|
|
*/
|
|
if (packet.size > priv->host_fifo_depth * 4)
|
|
value |= DSI_HOST_CONTROL_FIFO_SEL;
|
|
|
|
writel(value, &misc->host_dsi_ctrl);
|
|
|
|
/*
|
|
* For reads and messages with explicitly requested ACK, generate a
|
|
* BTA sequence after the transmission of the packet.
|
|
*/
|
|
if ((msg->flags & MIPI_DSI_MSG_REQ_ACK) ||
|
|
(msg->rx_buf && msg->rx_len > 0)) {
|
|
value = readl(&misc->host_dsi_ctrl);
|
|
value |= DSI_HOST_CONTROL_PKT_BTA;
|
|
writel(value, &misc->host_dsi_ctrl);
|
|
}
|
|
|
|
value = DSI_CONTROL_LANES(0) | DSI_CONTROL_HOST_ENABLE;
|
|
writel(value, &misc->dsi_ctrl);
|
|
|
|
/* write packet header, ECC is generated by hardware */
|
|
value = header[2] << 16 | header[1] << 8 | header[0];
|
|
writel(value, &misc->dsi_wr_data);
|
|
|
|
/* write payload (if any) */
|
|
if (packet.payload_length > 0)
|
|
tegra_dsi_writesl(misc, packet.payload,
|
|
packet.payload_length);
|
|
|
|
err = tegra_dsi_transmit(misc, 250);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if ((msg->flags & MIPI_DSI_MSG_REQ_ACK) ||
|
|
(msg->rx_buf && msg->rx_len > 0)) {
|
|
err = tegra_dsi_wait_for_response(misc, 250);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
count = err;
|
|
|
|
value = readl(&misc->dsi_rd_data);
|
|
switch (value) {
|
|
case 0x84:
|
|
debug("%s: ACK\n", __func__);
|
|
break;
|
|
|
|
case 0x87:
|
|
debug("%s: ESCAPE\n", __func__);
|
|
break;
|
|
|
|
default:
|
|
printf("%s: unknown status: %08x\n", __func__, value);
|
|
break;
|
|
}
|
|
|
|
if (count > 1) {
|
|
err = tegra_dsi_read_response(misc, msg, count);
|
|
if (err < 0) {
|
|
printf("%s: failed to parse response: %zd\n",
|
|
__func__, err);
|
|
} else {
|
|
/*
|
|
* For read commands, return the number of
|
|
* bytes returned by the peripheral.
|
|
*/
|
|
count = err;
|
|
}
|
|
}
|
|
} else {
|
|
/*
|
|
* For write commands, we have transmitted the 4-byte header
|
|
* plus the variable-length payload.
|
|
*/
|
|
count = 4 + packet.payload_length;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
struct mipi_dsi_host_ops tegra_dsi_bridge_host_ops = {
|
|
.transfer = tegra_dsi_host_transfer,
|
|
};
|
|
|
|
#define PKT_ID0(id) ((((id) & 0x3f) << 3) | (1 << 9))
|
|
#define PKT_LEN0(len) (((len) & 0x07) << 0)
|
|
#define PKT_ID1(id) ((((id) & 0x3f) << 13) | (1 << 19))
|
|
#define PKT_LEN1(len) (((len) & 0x07) << 10)
|
|
#define PKT_ID2(id) ((((id) & 0x3f) << 23) | (1 << 29))
|
|
#define PKT_LEN2(len) (((len) & 0x07) << 20)
|
|
|
|
#define PKT_LP BIT(30)
|
|
#define NUM_PKT_SEQ 12
|
|
|
|
/*
|
|
* non-burst mode with sync pulses
|
|
*/
|
|
static const u32 pkt_seq_video_non_burst_sync_pulses[NUM_PKT_SEQ] = {
|
|
[ 0] = PKT_ID0(MIPI_DSI_V_SYNC_START) | PKT_LEN0(0) |
|
|
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(1) |
|
|
PKT_ID2(MIPI_DSI_H_SYNC_END) | PKT_LEN2(0) |
|
|
PKT_LP,
|
|
[ 1] = 0,
|
|
[ 2] = PKT_ID0(MIPI_DSI_V_SYNC_END) | PKT_LEN0(0) |
|
|
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(1) |
|
|
PKT_ID2(MIPI_DSI_H_SYNC_END) | PKT_LEN2(0) |
|
|
PKT_LP,
|
|
[ 3] = 0,
|
|
[ 4] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
|
|
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(1) |
|
|
PKT_ID2(MIPI_DSI_H_SYNC_END) | PKT_LEN2(0) |
|
|
PKT_LP,
|
|
[ 5] = 0,
|
|
[ 6] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
|
|
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(1) |
|
|
PKT_ID2(MIPI_DSI_H_SYNC_END) | PKT_LEN2(0),
|
|
[ 7] = PKT_ID0(MIPI_DSI_BLANKING_PACKET) | PKT_LEN0(2) |
|
|
PKT_ID1(MIPI_DSI_PACKED_PIXEL_STREAM_24) | PKT_LEN1(3) |
|
|
PKT_ID2(MIPI_DSI_BLANKING_PACKET) | PKT_LEN2(4),
|
|
[ 8] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
|
|
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(1) |
|
|
PKT_ID2(MIPI_DSI_H_SYNC_END) | PKT_LEN2(0) |
|
|
PKT_LP,
|
|
[ 9] = 0,
|
|
[10] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
|
|
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(1) |
|
|
PKT_ID2(MIPI_DSI_H_SYNC_END) | PKT_LEN2(0),
|
|
[11] = PKT_ID0(MIPI_DSI_BLANKING_PACKET) | PKT_LEN0(2) |
|
|
PKT_ID1(MIPI_DSI_PACKED_PIXEL_STREAM_24) | PKT_LEN1(3) |
|
|
PKT_ID2(MIPI_DSI_BLANKING_PACKET) | PKT_LEN2(4),
|
|
};
|
|
|
|
/*
|
|
* non-burst mode with sync events
|
|
*/
|
|
static const u32 pkt_seq_video_non_burst_sync_events[NUM_PKT_SEQ] = {
|
|
[ 0] = PKT_ID0(MIPI_DSI_V_SYNC_START) | PKT_LEN0(0) |
|
|
PKT_ID1(MIPI_DSI_END_OF_TRANSMISSION) | PKT_LEN1(7) |
|
|
PKT_LP,
|
|
[ 1] = 0,
|
|
[ 2] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
|
|
PKT_ID1(MIPI_DSI_END_OF_TRANSMISSION) | PKT_LEN1(7) |
|
|
PKT_LP,
|
|
[ 3] = 0,
|
|
[ 4] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
|
|
PKT_ID1(MIPI_DSI_END_OF_TRANSMISSION) | PKT_LEN1(7) |
|
|
PKT_LP,
|
|
[ 5] = 0,
|
|
[ 6] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
|
|
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(2) |
|
|
PKT_ID2(MIPI_DSI_PACKED_PIXEL_STREAM_24) | PKT_LEN2(3),
|
|
[ 7] = PKT_ID0(MIPI_DSI_BLANKING_PACKET) | PKT_LEN0(4),
|
|
[ 8] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
|
|
PKT_ID1(MIPI_DSI_END_OF_TRANSMISSION) | PKT_LEN1(7) |
|
|
PKT_LP,
|
|
[ 9] = 0,
|
|
[10] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
|
|
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(2) |
|
|
PKT_ID2(MIPI_DSI_PACKED_PIXEL_STREAM_24) | PKT_LEN2(3),
|
|
[11] = PKT_ID0(MIPI_DSI_BLANKING_PACKET) | PKT_LEN0(4),
|
|
};
|
|
|
|
static const u32 pkt_seq_command_mode[NUM_PKT_SEQ] = {
|
|
[ 0] = 0,
|
|
[ 1] = 0,
|
|
[ 2] = 0,
|
|
[ 3] = 0,
|
|
[ 4] = 0,
|
|
[ 5] = 0,
|
|
[ 6] = PKT_ID0(MIPI_DSI_DCS_LONG_WRITE) | PKT_LEN0(3) | PKT_LP,
|
|
[ 7] = 0,
|
|
[ 8] = 0,
|
|
[ 9] = 0,
|
|
[10] = PKT_ID0(MIPI_DSI_DCS_LONG_WRITE) | PKT_LEN0(5) | PKT_LP,
|
|
[11] = 0,
|
|
};
|
|
|
|
static void tegra_dsi_get_muldiv(enum mipi_dsi_pixel_format format,
|
|
unsigned int *mulp, unsigned int *divp)
|
|
{
|
|
switch (format) {
|
|
case MIPI_DSI_FMT_RGB666_PACKED:
|
|
case MIPI_DSI_FMT_RGB888:
|
|
*mulp = 3;
|
|
*divp = 1;
|
|
break;
|
|
|
|
case MIPI_DSI_FMT_RGB565:
|
|
*mulp = 2;
|
|
*divp = 1;
|
|
break;
|
|
|
|
case MIPI_DSI_FMT_RGB666:
|
|
*mulp = 9;
|
|
*divp = 4;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int tegra_dsi_get_format(enum mipi_dsi_pixel_format format,
|
|
enum tegra_dsi_format *fmt)
|
|
{
|
|
switch (format) {
|
|
case MIPI_DSI_FMT_RGB888:
|
|
*fmt = TEGRA_DSI_FORMAT_24P;
|
|
break;
|
|
|
|
case MIPI_DSI_FMT_RGB666:
|
|
*fmt = TEGRA_DSI_FORMAT_18NP;
|
|
break;
|
|
|
|
case MIPI_DSI_FMT_RGB666_PACKED:
|
|
*fmt = TEGRA_DSI_FORMAT_18P;
|
|
break;
|
|
|
|
case MIPI_DSI_FMT_RGB565:
|
|
*fmt = TEGRA_DSI_FORMAT_16P;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra_dsi_pad_calibrate(struct dsi_pad_ctrl_reg *pad)
|
|
{
|
|
u32 value;
|
|
|
|
/* start calibration */
|
|
value = DSI_PAD_CONTROL_PAD_LPUPADJ(0x1) |
|
|
DSI_PAD_CONTROL_PAD_LPDNADJ(0x1) |
|
|
DSI_PAD_CONTROL_PAD_PREEMP_EN(0x1) |
|
|
DSI_PAD_CONTROL_PAD_SLEWDNADJ(0x6) |
|
|
DSI_PAD_CONTROL_PAD_SLEWUPADJ(0x6) |
|
|
DSI_PAD_CONTROL_PAD_PDIO(0) |
|
|
DSI_PAD_CONTROL_PAD_PDIO_CLK(0) |
|
|
DSI_PAD_CONTROL_PAD_PULLDN_ENAB(0);
|
|
writel(value, &pad->pad_ctrl);
|
|
|
|
clock_enable(PERIPH_ID_VI);
|
|
clock_enable(PERIPH_ID_CSI);
|
|
udelay(2);
|
|
reset_set_enable(PERIPH_ID_VI, 0);
|
|
reset_set_enable(PERIPH_ID_CSI, 0);
|
|
|
|
value = MIPI_CAL_TERMOSA(0x4);
|
|
writel(value, TEGRA_VI_BASE + (CSI_CILA_MIPI_CAL_CONFIG_0 << 2));
|
|
|
|
value = MIPI_CAL_TERMOSB(0x4);
|
|
writel(value, TEGRA_VI_BASE + (CSI_CILB_MIPI_CAL_CONFIG_0 << 2));
|
|
|
|
value = MIPI_CAL_HSPUOSD(0x3) | MIPI_CAL_HSPDOSD(0x4);
|
|
writel(value, TEGRA_VI_BASE + (CSI_DSI_MIPI_CAL_CONFIG << 2));
|
|
|
|
value = PAD_DRIV_DN_REF(0x5) | PAD_DRIV_UP_REF(0x7);
|
|
writel(value, TEGRA_VI_BASE + (CSI_MIPIBIAS_PAD_CONFIG << 2));
|
|
|
|
value = PAD_CIL_PDVREG(0x0);
|
|
writel(value, TEGRA_VI_BASE + (CSI_CIL_PAD_CONFIG << 2));
|
|
}
|
|
|
|
static void tegra_dsi_set_timeout(struct dsi_timeout_reg *rtimeout,
|
|
unsigned long bclk,
|
|
unsigned int vrefresh)
|
|
{
|
|
unsigned int timeout;
|
|
u32 value;
|
|
|
|
/* one frame high-speed transmission timeout */
|
|
timeout = (bclk / vrefresh) / 512;
|
|
value = DSI_TIMEOUT_LRX(0x2000) | DSI_TIMEOUT_HTX(timeout);
|
|
writel(value, &rtimeout->dsi_timeout_0);
|
|
|
|
/* 2 ms peripheral timeout for panel */
|
|
timeout = 2 * bclk / 512 * 1000;
|
|
value = DSI_TIMEOUT_PR(timeout) | DSI_TIMEOUT_TA(0x2000);
|
|
writel(value, &rtimeout->dsi_timeout_1);
|
|
|
|
value = DSI_TALLY_TA(0) | DSI_TALLY_LRX(0) | DSI_TALLY_HTX(0);
|
|
writel(value, &rtimeout->dsi_to_tally);
|
|
}
|
|
|
|
static void tegra_dsi_set_phy_timing(struct dsi_timing_reg *ptiming,
|
|
unsigned long period,
|
|
const struct mipi_dphy_timing *dphy_timing)
|
|
{
|
|
u32 value;
|
|
|
|
value = DSI_TIMING_FIELD(dphy_timing->hsexit, period, 1) << 24 |
|
|
DSI_TIMING_FIELD(dphy_timing->hstrail, period, 0) << 16 |
|
|
DSI_TIMING_FIELD(dphy_timing->hszero, period, 3) << 8 |
|
|
DSI_TIMING_FIELD(dphy_timing->hsprepare, period, 1);
|
|
writel(value, &ptiming->dsi_phy_timing_0);
|
|
|
|
value = DSI_TIMING_FIELD(dphy_timing->clktrail, period, 1) << 24 |
|
|
DSI_TIMING_FIELD(dphy_timing->clkpost, period, 1) << 16 |
|
|
DSI_TIMING_FIELD(dphy_timing->clkzero, period, 1) << 8 |
|
|
DSI_TIMING_FIELD(dphy_timing->lpx, period, 1);
|
|
writel(value, &ptiming->dsi_phy_timing_1);
|
|
|
|
value = DSI_TIMING_FIELD(dphy_timing->clkprepare, period, 1) << 16 |
|
|
DSI_TIMING_FIELD(dphy_timing->clkpre, period, 1) << 8 |
|
|
DSI_TIMING_FIELD(0xff * period, period, 0) << 0;
|
|
writel(value, &ptiming->dsi_phy_timing_2);
|
|
|
|
value = DSI_TIMING_FIELD(dphy_timing->taget, period, 1) << 16 |
|
|
DSI_TIMING_FIELD(dphy_timing->tasure, period, 1) << 8 |
|
|
DSI_TIMING_FIELD(dphy_timing->tago, period, 1);
|
|
writel(value, &ptiming->dsi_bta_timing);
|
|
}
|
|
|
|
static void tegra_dsi_configure(struct udevice *dev,
|
|
unsigned long mode_flags)
|
|
{
|
|
struct tegra_dsi_priv *priv = dev_get_priv(dev);
|
|
struct mipi_dsi_device *device = &priv->device;
|
|
struct display_timing *timing = &priv->timing;
|
|
|
|
struct dsi_misc_reg *misc = &priv->dsi->misc;
|
|
struct dsi_pkt_seq_reg *pkt = &priv->dsi->pkt;
|
|
struct dsi_pkt_len_reg *len = &priv->dsi->len;
|
|
|
|
unsigned int hact, hsw, hbp, hfp, i, mul, div;
|
|
const u32 *pkt_seq;
|
|
u32 value;
|
|
|
|
tegra_dsi_get_muldiv(device->format, &mul, &div);
|
|
|
|
if (mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) {
|
|
printf("[DSI] Non-burst video mode with sync pulses\n");
|
|
pkt_seq = pkt_seq_video_non_burst_sync_pulses;
|
|
} else if (mode_flags & MIPI_DSI_MODE_VIDEO) {
|
|
printf("[DSI] Non-burst video mode with sync events\n");
|
|
pkt_seq = pkt_seq_video_non_burst_sync_events;
|
|
} else {
|
|
printf("[DSI] Command mode\n");
|
|
pkt_seq = pkt_seq_command_mode;
|
|
}
|
|
|
|
value = DSI_CONTROL_CHANNEL(0) |
|
|
DSI_CONTROL_FORMAT(priv->format) |
|
|
DSI_CONTROL_LANES(device->lanes - 1) |
|
|
DSI_CONTROL_SOURCE(0);
|
|
writel(value, &misc->dsi_ctrl);
|
|
|
|
writel(priv->video_fifo_depth, &misc->dsi_max_threshold);
|
|
|
|
value = DSI_HOST_CONTROL_HS;
|
|
writel(value, &misc->host_dsi_ctrl);
|
|
|
|
value = readl(&misc->dsi_ctrl);
|
|
|
|
if (mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
|
|
value |= DSI_CONTROL_HS_CLK_CTRL;
|
|
|
|
value &= ~DSI_CONTROL_TX_TRIG(3);
|
|
|
|
/* enable DCS commands for command mode */
|
|
if (mode_flags & MIPI_DSI_MODE_VIDEO)
|
|
value &= ~DSI_CONTROL_DCS_ENABLE;
|
|
else
|
|
value |= DSI_CONTROL_DCS_ENABLE;
|
|
|
|
value |= DSI_CONTROL_VIDEO_ENABLE;
|
|
value &= ~DSI_CONTROL_HOST_ENABLE;
|
|
writel(value, &misc->dsi_ctrl);
|
|
|
|
for (i = 0; i < NUM_PKT_SEQ; i++)
|
|
writel(pkt_seq[i], &pkt->dsi_pkt_seq_0_lo + i);
|
|
|
|
if (mode_flags & MIPI_DSI_MODE_VIDEO) {
|
|
/* horizontal active pixels */
|
|
hact = timing->hactive.typ * mul / div;
|
|
|
|
/* horizontal sync width */
|
|
hsw = timing->hsync_len.typ * mul / div;
|
|
|
|
/* horizontal back porch */
|
|
hbp = timing->hback_porch.typ * mul / div;
|
|
|
|
if ((mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) == 0)
|
|
hbp += hsw;
|
|
|
|
/* horizontal front porch */
|
|
hfp = timing->hfront_porch.typ * mul / div;
|
|
|
|
/* subtract packet overhead */
|
|
hsw -= 10;
|
|
hbp -= 14;
|
|
hfp -= 8;
|
|
|
|
writel(hsw << 16 | 0, &len->dsi_pkt_len_0_1);
|
|
writel(hact << 16 | hbp, &len->dsi_pkt_len_2_3);
|
|
writel(hfp, &len->dsi_pkt_len_4_5);
|
|
writel(0x0f0f << 16, &len->dsi_pkt_len_6_7);
|
|
} else {
|
|
/* 1 byte (DCS command) + pixel data */
|
|
value = 1 + timing->hactive.typ * mul / div;
|
|
|
|
writel(0, &len->dsi_pkt_len_0_1);
|
|
writel(value << 16, &len->dsi_pkt_len_2_3);
|
|
writel(value << 16, &len->dsi_pkt_len_4_5);
|
|
writel(0, &len->dsi_pkt_len_6_7);
|
|
|
|
value = MIPI_DCS_WRITE_MEMORY_START << 8 |
|
|
MIPI_DCS_WRITE_MEMORY_CONTINUE;
|
|
writel(value, &len->dsi_dcs_cmds);
|
|
}
|
|
|
|
/* set SOL delay (for non-burst mode only) */
|
|
writel(8 * mul / div, &misc->dsi_sol_delay);
|
|
}
|
|
|
|
static int tegra_dsi_encoder_enable(struct udevice *dev)
|
|
{
|
|
struct tegra_dsi_priv *priv = dev_get_priv(dev);
|
|
struct mipi_dsi_device *device = &priv->device;
|
|
struct display_timing *timing = &priv->timing;
|
|
struct dsi_misc_reg *misc = &priv->dsi->misc;
|
|
unsigned int mul, div;
|
|
unsigned long bclk, plld, period;
|
|
u32 value;
|
|
int ret;
|
|
|
|
/* Disable interrupt */
|
|
writel(0, &misc->int_enable);
|
|
|
|
tegra_dsi_pad_calibrate(&priv->dsi->pad);
|
|
|
|
tegra_dsi_get_muldiv(device->format, &mul, &div);
|
|
|
|
/* compute byte clock */
|
|
bclk = (timing->pixelclock.typ * mul) / (div * device->lanes);
|
|
|
|
tegra_dsi_set_timeout(&priv->dsi->timeout, bclk, 60);
|
|
|
|
/*
|
|
* Compute bit clock and round up to the next MHz.
|
|
*/
|
|
plld = DIV_ROUND_UP(bclk * 8, USEC_PER_SEC) * USEC_PER_SEC;
|
|
period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, plld);
|
|
|
|
ret = mipi_dphy_timing_get_default(&priv->dphy_timing, period);
|
|
if (ret < 0) {
|
|
printf("%s: failed to get D-PHY timing: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = mipi_dphy_timing_validate(&priv->dphy_timing, period);
|
|
if (ret < 0) {
|
|
printf("%s: failed to validate D-PHY timing: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* The D-PHY timing fields are expressed in byte-clock cycles, so
|
|
* multiply the period by 8.
|
|
*/
|
|
tegra_dsi_set_phy_timing(&priv->dsi->ptiming,
|
|
period * 8, &priv->dphy_timing);
|
|
|
|
/* Perform panel HW setup */
|
|
ret = panel_enable_backlight(priv->panel);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tegra_dsi_configure(dev, 0);
|
|
|
|
ret = panel_set_backlight(priv->panel, BACKLIGHT_DEFAULT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tegra_dsi_configure(dev, device->mode_flags);
|
|
|
|
tegra_dc_enable_controller(dev);
|
|
|
|
/* enable DSI controller */
|
|
value = readl(&misc->dsi_pwr_ctrl);
|
|
value |= DSI_POWER_CONTROL_ENABLE;
|
|
writel(value, &misc->dsi_pwr_ctrl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_dsi_bridge_set_panel(struct udevice *dev, int percent)
|
|
{
|
|
/* Is not used in tegra dc */
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_dsi_panel_timings(struct udevice *dev,
|
|
struct display_timing *timing)
|
|
{
|
|
struct tegra_dsi_priv *priv = dev_get_priv(dev);
|
|
|
|
memcpy(timing, &priv->timing, sizeof(*timing));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra_dsi_init_clocks(struct udevice *dev)
|
|
{
|
|
struct tegra_dsi_priv *priv = dev_get_priv(dev);
|
|
struct mipi_dsi_device *device = &priv->device;
|
|
unsigned int mul, div;
|
|
unsigned long bclk, plld;
|
|
|
|
tegra_dsi_get_muldiv(device->format, &mul, &div);
|
|
|
|
bclk = (priv->timing.pixelclock.typ * mul) /
|
|
(div * device->lanes);
|
|
|
|
plld = DIV_ROUND_UP(bclk * 8, USEC_PER_SEC);
|
|
|
|
switch (clock_get_osc_freq()) {
|
|
case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
|
|
case CLOCK_OSC_FREQ_48_0: /* OSC is 48Mhz */
|
|
clock_set_rate(CLOCK_ID_DISPLAY, plld, 12, 0, 8);
|
|
break;
|
|
|
|
case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
|
|
clock_set_rate(CLOCK_ID_DISPLAY, plld, 26, 0, 8);
|
|
break;
|
|
|
|
case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
|
|
case CLOCK_OSC_FREQ_16_8: /* OSC is 16.8Mhz */
|
|
clock_set_rate(CLOCK_ID_DISPLAY, plld, 13, 0, 8);
|
|
break;
|
|
|
|
case CLOCK_OSC_FREQ_19_2:
|
|
case CLOCK_OSC_FREQ_38_4:
|
|
default:
|
|
/*
|
|
* These are not supported.
|
|
*/
|
|
break;
|
|
}
|
|
|
|
priv->dsi_clk = clock_decode_periph_id(dev);
|
|
|
|
clock_enable(priv->dsi_clk);
|
|
udelay(2);
|
|
reset_set_enable(priv->dsi_clk, 0);
|
|
}
|
|
|
|
static int tegra_dsi_bridge_probe(struct udevice *dev)
|
|
{
|
|
struct tegra_dsi_priv *priv = dev_get_priv(dev);
|
|
struct mipi_dsi_device *device = &priv->device;
|
|
struct mipi_dsi_panel_plat *mipi_plat;
|
|
int ret;
|
|
|
|
priv->dsi = (struct dsi_ctlr *)dev_read_addr_ptr(dev);
|
|
if (!priv->dsi) {
|
|
printf("%s: No display controller address\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->video_fifo_depth = 480;
|
|
priv->host_fifo_depth = 64;
|
|
|
|
ret = uclass_get_device_by_phandle(UCLASS_REGULATOR, dev,
|
|
"avdd-dsi-csi-supply", &priv->avdd);
|
|
if (ret)
|
|
debug("%s: Cannot get avdd-dsi-csi-supply: error %d\n",
|
|
__func__, ret);
|
|
|
|
ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev,
|
|
"panel", &priv->panel);
|
|
if (ret) {
|
|
printf("%s: Cannot get panel: error %d\n", __func__, ret);
|
|
return log_ret(ret);
|
|
}
|
|
|
|
panel_get_display_timing(priv->panel, &priv->timing);
|
|
|
|
mipi_plat = dev_get_plat(priv->panel);
|
|
mipi_plat->device = device;
|
|
|
|
priv->host.dev = (struct device *)dev;
|
|
priv->host.ops = &tegra_dsi_bridge_host_ops;
|
|
|
|
device->host = &priv->host;
|
|
device->lanes = mipi_plat->lanes;
|
|
device->format = mipi_plat->format;
|
|
device->mode_flags = mipi_plat->mode_flags;
|
|
|
|
tegra_dsi_get_format(device->format, &priv->format);
|
|
|
|
ret = regulator_set_enable_if_allowed(priv->avdd, true);
|
|
if (ret && ret != -ENOSYS)
|
|
return ret;
|
|
|
|
tegra_dsi_init_clocks(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct panel_ops tegra_dsi_bridge_ops = {
|
|
.enable_backlight = tegra_dsi_encoder_enable,
|
|
.set_backlight = tegra_dsi_bridge_set_panel,
|
|
.get_display_timing = tegra_dsi_panel_timings,
|
|
};
|
|
|
|
static const struct udevice_id tegra_dsi_bridge_ids[] = {
|
|
{ .compatible = "nvidia,tegra30-dsi" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(tegra_dsi) = {
|
|
.name = "tegra_dsi",
|
|
.id = UCLASS_PANEL,
|
|
.of_match = tegra_dsi_bridge_ids,
|
|
.ops = &tegra_dsi_bridge_ops,
|
|
.probe = tegra_dsi_bridge_probe,
|
|
.plat_auto = sizeof(struct tegra_dc_plat),
|
|
.priv_auto = sizeof(struct tegra_dsi_priv),
|
|
};
|