u-boot

mirror of https://github.com/u-boot/u-boot.git synced 2025-04-16 09:54:35 +00:00

History

Marek Vasut 5fb3ba988c board: engicam: Remove duplicate newlines Drop all duplicate newlines. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>		2024-07-22 10:51:46 -06:00
..
imx6q.c	board: engicam: Remove duplicate newlines	2024-07-22 10:51:46 -06:00
Kconfig	board: engicam: Attach i.MX6 common code	2020-10-30 23:31:26 +08:00
MAINTAINERS	MAINTAINERS: Add a number of "common" directories	2023-07-25 12:44:47 -04:00
Makefile	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
README	i.MX6: engicam: Add imx6q/imx6ul boards for existing boards	2017-11-27 10:36:40 +01:00

README

Hsow to use U-Boot on Engicam i.CoreM6 (RQS) Solo/DualLite/Quad/Dual Starter Kit:
--------------------------------------------------------------------------------

$ make mrproper

- Configure U-Boot for Engicam i.CoreM6 Quad/Duali/Solo/DualLite:
$ make imx6qdl_icore_mmc_defconfig

- Configure U-Boot for Engicam i.CoreM6 RQS Quad/Duali/Solo/DualLite:
$ make imx6qdl_icore_rqs_defconfig

- Build U-Boot
$ make

This will generate the SPL image called SPL and the u-boot-dtb.img.

- Flash the SPL image into the micro SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot-dtb.img image into the micro SD card:

sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Jumper settings:

MMC Boot: JM3 Closed

- Connect the Serial cable between the Starter Kit and the PC for the console.
(J28 is the Linux Serial console connector)

- Insert the micro SD card in the board, power it up and U-Boot messages should
come up.