According to the documentation (for example NXP's AN13994 on encrypted
boot on AHAB-enabled devices), the format of the signature block is:
+--------------+--------------+--------------+-------------+
| Tag | Length - msb | Length - lsb | Version |
+--------------+--------------+--------------+-------------+
| SRK Table offset | Certificate offset |
+-----------------------------+----------------------------+
| Blob offset | Signature offset |
+-----------------------------+----------------------------+
There is no runtime error in the current u-boot code. The only user of
struct signature_block_hdr is the "get_container_size" function in the
"arch/arm/mach-imx/image-container.c" file, and it's only using the very
first fields of the struct (which are in the correct position) and thus
there is no runtime failure.
On the other hand, extending the code to get the data encryption key
blob offset on the signature header gives a wrong value as the field is
in the wrong order.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
u-boot-dfu-next-20240402
- Implement Qualcomm wrapper for dwc3
- Multiple sector size support for UMS
- CDC ACM gadget initialization fix
- Refactor board code from dwc3 to prepare better interrupt support
- Bugfix for for qcom-smmu when compiling with -DDEBUG
The only call site of dwc3_uboot_handle_interrupt() is the
dm_usb_gadget_handle_interrupts(), fold the former into the
later. This makes dwc3_uboot_handle_interrupt() unavailable
to be called from board code as well.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3
Link: https://lore.kernel.org/r/20240317044357.547037-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The dm_usb_gadget_handle_interrupts() has no place in board code. Move
this into DWC3 driver. The OMAP implementation is special, add new weak
dwc3_uboot_interrupt_status() function to decide whether DWC3 interrupt
handling should be called, and override it in OMAP DWC3 code, to repair
the special OMAP interrupt handling code until OMAP gets switched over
to DM UDC proper.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # qcom sdm845
Link: https://lore.kernel.org/r/20240317044357.547037-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Ilias Apalodimas <ilias.apalodimas@linaro.org> says:
The arm linker scripts had a mix of symbols and C defined variables in an
effort to emit relative references instead of absolute ones e.g [0]. A
linker bug prevented us from doing so [1] -- fixed since 2016.
This has led to confusion over the years, ending up with mixed section
definitions. Some sections are defined with overlays and different
definitions between v7 and v8 architectures.
For example __efi_runtime_rel_start/end is defined as a linker symbol for
armv8 and a C variable in armv7.
Linker scripts nowadays can emit relative references, as long as the symbol
definition is contained within the section definition. So let's switch most
of the C defined variables and clean up the arm sections.c file.
There's still a few symbols remaining -- __secure_start/end,
__secure_stack_start/end and __end which can be cleaned up
in a followup series.
For both QEMU v7/v8 bloat-o-meter shows now size difference
$~ ./scripts/bloat-o-meter u-boot u-boot.new
add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0)
Function old new delta
Total: Before=798861, After=798861, chg +0.00%
The symbols seem largely unchanged apart from a difference in .bss
as well as the emited sections and object types of the affected variables.
On the output below the first value is from -next and the second comes from
-next + this patchset. The .bss_start/end sections have disappeared from
the newer binaries.
# For example on QEMU v8:
efi_runtime_start
7945: 0000000000000178 0 OBJECT GLOBAL DEFAULT 2 __efi_runtime_start
7942: 0000000000000178 0 NOTYPE GLOBAL DEFAULT 2 __efi_runtime_start
efi_runtime_stop
9050: 0000000000000d38 0 OBJECT GLOBAL DEFAULT 2 __efi_runtime_stop
9047: 0000000000000d38 0 NOTYPE GLOBAL DEFAULT 2 __efi_runtime_stop
__efi_runtime_rel_start
7172: 00000000000dc2f0 0 OBJECT GLOBAL DEFAULT 10 __efi_runtime_rel_start
7169: 00000000000dc2f0 0 NOTYPE GLOBAL DEFAULT 10 __efi_runtime_rel_start
__efi_runtime_rel_stop
7954: 00000000000dc4a0 0 OBJECT GLOBAL DEFAULT 10 __efi_runtime_rel_stop
7951: 00000000000dc4a0 0 NOTYPE GLOBAL DEFAULT 10 __efi_runtime_rel_stop
__rel_dyn_start
7030: 00000000000dc4a0 0 OBJECT GLOBAL DEFAULT 11 __rel_dyn_start
7027: 00000000000dc4a0 0 NOTYPE GLOBAL DEFAULT 11 __rel_dyn_start
__rel_dyn_end
8959: 0000000000102b10 0 OBJECT GLOBAL DEFAULT 12 __rel_dyn_end
8956: 0000000000102b10 0 NOTYPE GLOBAL DEFAULT 11 __rel_dyn_end
image_copy_start
9051: 0000000000000000 0 OBJECT GLOBAL DEFAULT 1 __image_copy_start
9048: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 1 __image_copy_start
image_copy_end
7467: 00000000000dc4a0 0 OBJECT GLOBAL DEFAULT 11 __image_copy_end
7464: 00000000000dc4a0 0 NOTYPE GLOBAL DEFAULT 11 __image_copy_end
bss_start
12: 0000000000102b10 0 SECTION LOCAL DEFAULT 12 .bss_start
8087: 0000000000000018 0 NOTYPE GLOBAL DEFAULT 1 _bss_start_ofs
8375: 0000000000102b10 0 OBJECT GLOBAL DEFAULT 12 __bss_start
8084: 0000000000000018 0 NOTYPE GLOBAL DEFAULT 1 _bss_start_ofs
8372: 0000000000102b10 0 NOTYPE GLOBAL DEFAULT 12 __bss_start
bss_end
14: 000000000010bc30 0 SECTION LOCAL DEFAULT 14 .bss_end
7683: 000000000010bc30 0 OBJECT GLOBAL DEFAULT 14 __bss_end
8479: 0000000000000020 0 NOTYPE GLOBAL DEFAULT 1 _bss_end_ofs
7680: 000000000010bbb0 0 NOTYPE GLOBAL DEFAULT 12 __bss_end
8476: 0000000000000020 0 NOTYPE GLOBAL DEFAULT 1 _bss_end_ofs
# For QEMU v7:
efi_runtime_start
10703: 000003bc 0 OBJECT GLOBAL DEFAULT 2 __efi_runtime_start
10699: 000003c0 0 NOTYPE GLOBAL DEFAULT 2 __efi_runtime_start
efi_runtime_stop
11796: 000012ec 0 OBJECT GLOBAL DEFAULT 2 __efi_runtime_stop
11792: 000012ec 0 NOTYPE GLOBAL DEFAULT 2 __efi_runtime_stop
__efi_runtime_rel_start
9937: 000c40dc 0 OBJECT GLOBAL DEFAULT 8 __efi_runtime_rel_start
9935: 000c40dc 0 NOTYPE GLOBAL DEFAULT 9 __efi_runtime_rel_start
__efi_runtime_rel_stop
10712: 000c41dc 0 OBJECT GLOBAL DEFAULT 10 __efi_runtime_rel_stop
10708: 000c41dc 0 NOTYPE GLOBAL DEFAULT 9 __efi_runtime_rel_stop
__rel_dyn_start
9791: 000c41dc 0 OBJECT GLOBAL DEFAULT 10 __rel_dyn_start
9789: 000c41dc 0 NOTYPE GLOBAL DEFAULT 10 __rel_dyn_start
__rel_dyn_end
11708: 000da5f4 0 OBJECT GLOBAL DEFAULT 10 __rel_dyn_end
11704: 000da5f4 0 NOTYPE GLOBAL DEFAULT 10 __rel_dyn_end
image_copy_start
448: 0000177c 0 NOTYPE LOCAL DEFAULT 3 _image_copy_start_ofs
11797: 00000000 0 OBJECT GLOBAL DEFAULT 1 __image_copy_start
445: 0000177c 0 NOTYPE LOCAL DEFAULT 3 _image_copy_start_ofs
11793: 00000000 0 NOTYPE GLOBAL DEFAULT 1 __image_copy_start
image_copy_end
450: 00001780 0 NOTYPE LOCAL DEFAULT 3 _image_copy_end_ofs
10225: 000c41dc 0 OBJECT GLOBAL DEFAULT 10 __image_copy_end
447: 00001780 0 NOTYPE LOCAL DEFAULT 3 _image_copy_end_ofs
10222: 000c41dc 0 NOTYPE GLOBAL DEFAULT 10 __image_copy_end
bss_start
11: 000c41dc 0 SECTION LOCAL DEFAULT 11 .bss_start
11124: 000c41dc 0 OBJECT GLOBAL DEFAULT 11 __bss_start
11120: 000c41dc 0 NOTYPE GLOBAL DEFAULT 11 __bss_start
bss_end
13: 000cbbf8 0 SECTION LOCAL DEFAULT 13 .bss_end
10442: 000cbbf8 0 OBJECT GLOBAL DEFAULT 13 __bss_end
10439: 000cbbf8 0 NOTYPE GLOBAL DEFAULT 11 __bss_end
It's worth noting that since the efi regions are affected by the change, booting
with EFI is preferable while testing. Booting the kernel only should be enough
since the efi stub and the kernel proper do request boottime and runtime
services respectively.
Something along the lines of
> virtio scan && load virtio 0 $kernel_addr_r Image && bootefi $kernel_addr_r
will work for QEMU aarch64.
Tested platforms:
- QEMU aarch64
- Xilinx kv260 kria starter kit & zynq
- QEMU armv7
- STM32MP157C-DK2
[0] commit 3ebd1cbc49 ("arm: make __bss_start and __bss_end__ compiler-generated")
[1] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
__efi_runtime_start/end are defined as c variables for arm7 only in
order to force the compiler emit relative references. However, defining
those within a section definition will do the same thing since [0].
On top of that the v8 linker scripts define it as a symbol.
So let's remove the special sections from the linker scripts, the
variable definitions from sections.c and define them as a symbols within
the correct section.
[0] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
Suggested-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Sam Edwards <CFSworks@gmail.com> # Binary output identical
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
__efi_runtime_rel_start/end are defined as c variables for arm7 only in
order to force the compiler emit relative references. However, defining
those within a section definition will do the same thing since [0].
On top of that the v8 linker scripts define it as a symbol.
So let's remove the special sections from the linker scripts, the
variable definitions from sections.c and define them as a symbols within
the correct section.
[0] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
Suggested-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Sam Edwards <CFSworks@gmail.com>
Tested-by: Sam Edwards <CFSworks@gmail.com> # Binary output identical
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
- A few ncsi PHY fixes, clean up PHY GPIO reset code, support LEDs on
BCM54210E PHY, fix a signed shift overflow in the PHY code, hifemac
updates, E1000 i225-IT support, improve DM_MDIO+DM_PHY support and
enable it on the BeaglePlay platform.
We should not use the reserved value 0x00 for the wake up type but
use 0x02 (Unknown).
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Document struct acpi_gen_regaddr and struct acpi_hpet.
Sphinx requires that the __packed attribute is at the end of the structure
definitions.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The fields Creator ID and Creator Revision contain information about the
tool that created an ACPI table. This may be the ASL compiler for some
tables but it is not for others. Naming these fields aslc_id and
aslc_revision is misleading.
It is usual to see diverse values of Creator ID. On a laptop I saw these:
'AMD ', 'INTL, 'MSFT', 'PTEC'. Obviously not all relate to the Intel
ASL compiler.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Pull the PHY GPIO reset code into separate function, since
this is and will be reused multiple times. Set up default
reset assert and deassert timing to generous 20ms and 1ms
for maximum compatibility in case those DT properties are
missing.
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
-----BEGIN PGP SIGNATURE-----
iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmX8JnYcHGV1Z2VuLmhy
aXN0ZXZAY29sbGFib3JhLmNvbQAKCRAesx4CDqwvyFfPB/4g0YTnWiI0ENLumM+Q
RwcfIZJZ9YS49QPGil04i8+3TKH9b/vJZc6oyeKBQ1ZYis/kgcUHFFeMjZek8Ou5
yKd/zj861sRmRSBPD5WCSPx4YX1V6xln64vlYTvjeWs1auRuj16sPOcacxlpR6J/
p95DMt0EF5kUzCPD1WbZC6fIMhyXJT7OD1NiIJXCQT6w1hnkS2pC3Y5fiPsyR9yz
7R7yQ+hJyWBp/KsYNcgDpINSQqDSis5dd4RD/2felQ6kKGvZfuDW5pK2LyL0xAt0
Q+jNoaMw8nJQ/RxH7WbbVd0lKX0S94t/PRlCLVQkZRoWsioQ9puT38ToKTRq3yvS
2Omr
=GQJV
-----END PGP SIGNATURE-----
Merge tag 'u-boot-at91-2024.07-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next
First set of u-boot-at91 features for the 2024.07 cycle:
- This feature set includes a new board named sama7g54 Curiosity.
Add APIs to set a firmware_name to a rproc and boot the rproc with the
same firmware.
Clients can call rproc_set_firmware() API to set firmware_name for a rproc
whereas rproc_boot() will load the firmware set by rproc_set_firmware() to
a buffer by calling request_firmware_into_buf(). rproc_boot() will then
load the firmware file to the remote processor and start the remote
processor.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Acked-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
UFS storage often uses a 4096-byte sector size, add support for dynamic
sector sizes based loosely on the Linux implementation.
Support for dynamic sector sizes changes the types used in some
divisions, resulting in the compiler attempting to use
libgcc helpers (__aeabi_ldivmod).
Replace these divisions with calls to lldiv() to handle this correctly.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240320-b4-qcom-usb-v4-4-41be480172e1@linaro.org
[mkorpershoek: squashed the lldiv() fix from caleb]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Code page 437 uses code points 1-31 for glyphs instead of control
characters. Map the appropriate Unicode code points to this code points.
Fixes rendering of grub2's menu as EFI application using the
EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL on a console with bitmap fonts.
Signed-off-by: Janne Grunau <j@jannau.net>
efi_console / UEFI applications (grub2, sd-boot, ...) pass UTF-8
character sequences to vidconsole which results in wrong glyphs for code
points outside of ASCII. The truetype console expects Unicode code
points and bitmap font based consoles expect code page 437 code points.
To support both convert UTF-8 to UTF-32 and pass Unicode code points in
vidconsole_ops.putc_xy(). These can be used directly in console_truetype
and after conversion to code page 437 in console_{normal,rotate}.
This fixes rendering of international, symbol and box drawing characters
used by UEFI applications.
Signed-off-by: Janne Grunau <j@jannau.net>
- A new driver in the misc to register setting from device tree. This
also provides user a clean interface and all register settings are
centralized in one place, device tree.
- Enable Agilex5 platform for Intel product. Changes, modification and
new files are created for board, dts, configs and makefile to create
the base for Agilex5.
Build-tested on SoC64 boards, boot tested on some of them.
This patch is to enable Agilex5 platform for Intel
product. Changes, modification and new files are
created for board, dts, configs and makefile to
create the base for Agilex5.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Add logic for booting systems with the RAUC update mechanism. This can
be reused by other phytec boards.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
Move the environment into the board directory and convert it from a C
header to a text file. Sort the variables alphabetically.
No functional changes.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
Please pull the updates for rockchip platform:
- Add board: rk3588 Generic, Cool Pi CM5, Theobroma-Systems RK3588 Jaguar SBC,
Toybrick TB-RK3588X;
rk3588s Cool Pi 4B;
rk3566 Pine64 PineTab2;
- Add saradc v2 support;
- Add PMIC RK806 support;
- rk3588 disable force_jtag by default;
- Migrate to use IO-domain driver for all boards;
- Use common bss and stack addresses for rk33xx and rk35xx boards;
- Other updates for driver, config and dts;
This adds support for RK806, only the SPI variant has been tested.
The communication "protocol" over SPI is the following:
- write three bytes:
- 1 byte: [0:3] length of the payload, [6] Enable CRC, [7] Write
- 1 byte: LSB register address
- 1 byte: MSB register address
- write/read length of payload
The CRC is always disabled for now.
The RK806 technically supports I2C as well, and this should be able to
support it without any change, but it wasn't tested.
The DT node name prefix for the buck converters has changed in the
Device Tree and is now dcdc-reg. The logic for buck converters is
however manageable within the current logic inside the rk8xx regulator
driver. The same cannot be said for the NLDO and PLDO.
Because pmic_bind_children() parses the DT nodes and extracts the LDO
index from the DT node name, NLDO and PLDO will have overlapping
indices. Therefore, we need a separate logic from the already-existing
ldo callbacks. Let's reuse as much as possible though.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Those two functions had their last user removed in commit f9c68a566c
("rockchip: phycore_rk3288: remove phycore_init() function") part of
v2023.01 release, so let's do some cleanup here.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Move ROCK Pi 4 specific board code from the shared evb_rk3399 target
into its own board target and update related defconfigs to use the new
TARGET_ROCKPI4_RK3399 option.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
TB-RK3588X board is a Rockchip Toybrick RK3588 based development board.
Specification:
Rockchip Rk3588 SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16GB Memory LPDDR4x
Mali G610MC4 GPU
2× MIPI-CSI0 Connector
1x 2Lanes PCIe3.0 Connector
1x SATA3.0 Connector
32GB eMMC Module
2x USB 2.0, 2x USB 3.0
1x HDMI Output, 1x HDMI Input
2x Ethernet Port
Functions work normally:
[1] USB2.0 Host
[2] Ethernet0 with PHY RTL8211F
More information can be obtained from the following websites:
[1] https://t.rock-chips.com/en/wiki/EN/tb-rk3588x_en/index.html
[2] http://t.rock-chips.com/
Kernel commits:
8ffe365f8dc7 ("arm64: dts: rockchip: Add devicetree support for TB-RK3588X board")
7140387ff49d ("dt-bindings: arm: rockchip: Add Toybrick TB-RK3588X")
Reviewed-by: Weizhao Ouyang <weizhao.ouyang@arm.com>
Signed-off-by: Elon Zhang <zhangzj@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This architecture and related board are unmaintained currently and have
been for a long time. Remove them.
Signed-off-by: Tom Rini <trini@konsulko.com>
According to PSCI specification DEN0022F, PSCI_FEATURES is used to check
whether the SMCCC is implemented by discovering SMCCC_VERSION.
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Include the clock and lpsc tree files needed for the wkup spl to
initialize the proper PLLs and power domains to boot the SoC.
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Add default configuration for nand-flash to boot the linux kernel.
Add default configuration for qspi-flash to boot the linux kernel.
Add default configuration for sd-card to boot the linux kernel.
Configs are synced with savedefconfig.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
hardware.h is only defining macros which are "wrappers" around writel().
writel() is however not available in hardware.h, <asm/io.h> needs to be
included. This means in order to use the wrappers in hardware.h, one
also needs to include the <asm/io.h> header.
However, this cannot be done currently because hardware.h is included in
include/configs files, which are implicitly included by every code file
by default, which makes the compilation of arch/arm/cpu/armv8/u-boot.lds
fail because ALIGN (the ARM assembly directive) got redefined by some
of the include files coming from <asm.io.h>.
Because nothing in the include/configs file actually use hardware.h,
let's remove the inclusion of hardware.h from the include/configs files
and explicitly add it wherever it is required.
This prepares for the next commit where <asm/io.h> will be included in
hardware.h.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Distro boot scripts are deprecated. Use standard boot instead.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Some platforms have bus level Reset controlled
by a GPIO line. If available then handle bus reset
via GPIO.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Add board files for J784S4 EVM.
SYS_DISABLE_DCACHE_OPS is selected in the Kconfig because
J784S4/AM69 are a coherent architecture at A72 level by
MSMC support.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # AM69-SK
Add clk and device data which can be used by respective drivers
to configure clocks and PSC.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # AM69-SK
The "bootflow" command currently doesn't support scanning a single
partition. This is inconvenient in setups with multiple bootable
partitions within a single disk, but only one is desired.
Support scanning a single disk partition. Specifically, support the
syntax:
bootflow scan mmc1:4
which scans only mmc device 1, partition 4.
Signed-off-by: Nam Cao <namcao@linutronix.de>
It was only included by a single board which doesn't appear to have
ever used it for any default use cases so drop the filesystem now
that isn't used by any in-tree configurations.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Rename rmobile.h to renesas.h because all the chips are made
by Renesas, while only a subset of them is from the R-Mobile
line.
Use the following command to perform the rename:
"
$ git grep -l 'include.*rmobile.h' | \
xargs -I {} sed -i '/include.*rmobile.h/ s@rmobile.h@renesas.h@g' {}
"
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
When `gd` is relocated during `spl_relocate_stack_gd()` the
doubly-linked circular list in the `log_head` member is broken.
The last element of the list should point back to the initial
`list_head`, but as the initial `list_head` is moved the pointer becomes
stale. As a result the loop in `log_dispatch` would never finish.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Usage of common.h is deprecated.
* Remove common.h from RNG drivers.
* Sort includes.
* Add time.h to sandbox driver.
* Add linux/types.h to rng.h to provide size_t.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The FWU Multi Bank Update feature allows the platform to boot the
firmware images from one of the partitions(banks).
On the Developerbox, SCP-firmware running on the SCB(Cortex-M3)
passes the value of the boot index on the NOR flash.
Add a function to read the boot index value from the NOR flash.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Import the headers needed for QCS404-evb.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Import dt-binding headers for MSM8996/APQ8096 from Linux.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Import the dt-bindings headers in preparation for switching to upstream
DTS for MSM8916.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
