As the flash reset is handled in spi nor core, removing the
flash reset functionality. As the configuration like tristate
and hysterisis need to be enabled by the cdo. Handle the flash
reset only for mini u-boot case.
Rename the "cadence_qspi_versal_flash_reset" to generic name
"cadence_qspi_flash_reset" as this can be used by other platforms
as well.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20241108063537.13180-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
USB host support on ZYNQMP KRIA SOM needs onboard USB
hub driver for handling reset GPIO and for i2c initialization
sequence.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20241126041238.1969723-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Enable PCIe/NVMe support on Data Modul i.MX8M Mini eDM SBC. Except for
the configuration options which are enabled, add slight adjustment
to board u-boot.dtsi, which is necessary as there is currently no
driver for the I2C PCIe clock generator. Since the generator is
strapped to be always on, it is possible to supplant the generator
functionality by fixed-clock.
Signed-off-by: Marek Vasut <marex@denx.de>
The YModem support in SPL was never really used on this device,
the SDP support is much more convenient on i.MX8M Mini based
hardware. Replace the YModem support with SDP support.
The SDP can be utilized by forcing the board into SDP boot mode
by grounding test point right next to silkscreen label U30, and
then by using mfgtools 'uuu -brun spl flash.bin' once the device
enumerates on host system USB bus. The SDP capable USB port is
available on the USB micro-B port on the base board.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Deduplicate defconfigs for all Data Modul i.MX8M eDM SBC systems by factoring
out the common parts into generic imx8m_data_modul.config and including
those using the #include <configs/...> preprocessor macro in the current
set of board specific defconfigs. The preprocessor macro is applicable
to defconfigs as well.
This introduces no functional change, the resulting .config is almost
identical for all Data Modul i.MX8M eDM SBC systems, except for slight
alignment in DEBUG_UART and SYS_PBSIZE.
Signed-off-by: Marek Vasut <marex@denx.de>
The current A/B switching preparatory altbootcmd is confusing
to users, replace it with plain 'run bootcmd' which can be
replaced by proper A/B switching altbootcmd when the matching
updater is added on top of the platform. By default, keep the
boot counter incrementing, but do not do any A/B partition
switching.
Signed-off-by: Marek Vasut <marex@denx.de>
In case gpio_request_list_by_name_nodev() in board dmo_get_memcfg()
returns error code, pick a safe default DRAM configuration instead
of bailing out with some sort of hang() or panic(). The BIT(2)|BIT(0)
strap option is the lowest known option of 2 GiB , use that.
Signed-off-by: Marek Vasut <marex@denx.de>
The DRAM configuration GPIO straps must be accessible in SPL and before
relocation because the GPIOs are sampled both in U-Boot SPL as well as early
on in U-Boot proper. The already present bootph-pre-ram DT property made the
GPIO controllers available in SPL, but not early on in U-Boot proper, which
made gpio_request_list_by_name_nodev() in board dmo_get_memcfg() fail. Add
missing bootph-some-ram DT property to all GPIO controllers which are
referenced in dmo,ram-coding-gpios DT property to make those GPIO
controllers available early in U-Boot proper as well.
Fixes: 8c103c33fb ("dm: dts: Convert driver model tags to use new schema")
Signed-off-by: Marek Vasut <marex@denx.de>
Always probing pmecc in the generic nand controller probe function and
bailing out if pmecc is missing, prevents the driver to be usable for
SoCs which do not have a pmecc hardware ecc engine like older sam9 SoCs,
for example at91sam9g20. Tested on sam9x60 that the call, which the
comment was moved to, is sufficient to probe the pmecc.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
The bad CRC error message has transposed characters, which render the
output useless:
"bad CRC at record 213: #08x, not #08x" instead of
"bad CRC at record 213: #00000000, not #4be31f4d"
Fix the error message.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
A NULL pointer argument to %s causes a NULL pointer dereference in the
fixed width numerical printout code, since p is overwritten with NULL.
In case of %s width is 0. Check width before dereferencing the pointer.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
CI: https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/23584
Remove device specific nand driver files as they are now replaced by a
common driver bcmbca_nand.c
Make use of OF_UPSTREAM which uses Linux dts.
Implement a minimal set of defconfig options to enable basic NAND
functionality. Tested on:
47622
63146
63158
63178
6813
Set parameter_page_big_endian to zero for bcmbca.
Update log level messages so that more critical messages can be logged
to console and help the troubleshooting with field devices.
Currently, the PCI subsystem selects the small "region 2" (which starts at 0x7000000)
as bus_addr/phys_addr. As a consequence, the BAR0 on PCIe video card cannot be initialized,
because it simply doesn't fit into 0x1000000 bytes size of "region 2".
U-Boot should use "region 1" instead (the one which starts at 0x60090000), because
it has much bigger size (0xFF70000), and easily accomodates BAR0 of the video card.
Linux kernel also uses 0x60090000 as bus_start/phys_start.
Signed-off-by: Yuri Zaporozhets <yuriz@vodafonemail.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
To restore MMC boot, enable SPL_SYS_MMCSD_RAW_MODE and recover
SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION and
SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION.
Fixes: 2a00d73d08 ("spl: mmc: Try to clean up raw-mode options")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
With the move from script based booting to using bootmeth a lot of
environment variables have changed. To always use the default environment
it is recommendable to erase the environment stored in the SPI flash.
This can be done with the 'env erase' sub-command.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
If BIOSEMU is compiled for RISC-V (SiFive Unmatched board) and the function
dm_pci_run_vga_bios() is executed, U-Boot stops with error message saying
that the SPL malloc pool is too small. So increase the default pool size
when both BIOSEMU and RISCV parameters are set.
Signed-off-by: Yuri Zaporozhets <yuriz@qrv-systems.net>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The SPL_FIT_GENERATOR is long superseded by binman, drop SPL_FIT_GENERATOR
support as there are no more users.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/22109373594b6a5d1110be9420ccd8fbb93a61d3.1730452668.git.michal.simek@amd.com
u-boot.itb has been generated via mkimage_fit_atf.sh but it is on the way
out that's why convert it's description to binman.
Compare to script binman description is not able to configure BL31 and BL32
load/entry addresses which should be done separately.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/90b613796aee38158252c8bb1dfc3da0420f089d.1730452668.git.michal.simek@amd.com
There is necessary to do some steps to compose boot images. These steps
were in scripts in layers for a while. That's why introduce description via
binman to simplify wiring and remove all scripting around.
This should make sure that everybody is up2date with the latest versions.
The first step is to create fit image with DTBs with descriptions in
configuration node which is written as regular expression to match all SOM
versions.
Description is there for k24 and k26 in spite of low level psu_init
configuration is different. The reason is that it goes to u-boot.itb image
which is the same for k24 and k26.
u-boot.itb is another image which is generated. It is normally generated
via arch/arm/mach-zynqmp/mkimage_fit_atf.sh but this script is supposed to
be deprecated.
FIT image by purpose is using 64bit addresses to have default option to
move images to high DDR (above 4GB). TF-A and TEE are optional components
but in the most cases TF-A is present all the time and TEE(OP-TEE) is used
by some configurations too.
3rd generated image is boot.bin with updated user field which contains
version number. This image can be used with updated Image Selector
which supports A/B update mechanisms with rollback protection.
4th image is image.bin which binary file which contains boot.bin and
u-boot.itb together and can be programmed via origin Image Selector.
This image can be also used for creating one capsule which contains both
boot images (in SPL boot flow).
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/35bc47a4a4799c5f5dbea56a45340a2810538330.1730452668.git.michal.simek@amd.com
Adding binman node with target images description can be unwanted feature
but as of today there is no way to disable it.
Also on size constrained systems it is not useful to add binman description
to DTB.
Introduce BINMAN_DTB Kconfig symbol which allows separate DTB for target
from DTB for binman itself.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/f1379d2587f9bf279a7a75c318aabbc1b35ee0c6.1730452668.git.michal.simek@amd.com
Update log level messages so that more critical messages can be logged
to console and help the troubleshooting with field devices.
This is a port of the upstream Linux patch to U-Boot.
https://lore.kernel.org/linux-mtd/20240223034758.13753-4-william.zhang@broadcom.com/
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
Set parameter_page_big_endian to zero for bcmbca
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
Make use of OF_UPSTREAM which uses Linux dts.
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
These device specific nand driver files can be removed because
they are now replaced by a common driver bcmbca_nand.c
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
We don't need the fallback anymore. Remove the code which uses these
files.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
We don't need the fallback anymore. As a first step to removing it,
drop the try...except clauses and unindent the code.
This produces a large diff but there are no other code changes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Like for test_fs, no need to mess with loop mounts.
Signed-off-by: Richard Weinberger <richard@nod.at>
Tweaks to reduce diff (keep mnt variable):
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a parameter to indicate the size of the image to build.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Since no mounting happens anymore, rename the "mnt"
directory to "scratch" and the related variables.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
There is no need to mount the filesystem on the host side.
All filesystem tools offer some way to fill the fs without mounting.
So, create the content on the host side, create and fill the fs
without mounting.
No more sudo or guestmount needed.
This new approach works because the tests don't care about user IDs
and no device files are needed.
If user IDs start to matter it's still possible to use wrapper
tools like fakeroot in future while filling the fs.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/23573
Android:
- bootstd: Implement bootimage v2 support
- bootstd: Support non-A/B in bootmeth_android
- Migrate VIM3 and VIM3L to use bootmeth_android
- bootstd: Additional test for bootimage v2
- bootstd: Optimize load time when reading partitions
The x250 and SE250 are series of 10G L2+ switches from Allied Telesis.
There are a number of them in the range but as far as U-Boot is
concerned all the CPU block components are the same so there's only one
board defined.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
