iMX91 is reduced part from iMX93 with part number: i.MX9131/11/01
It removed A55_1, M33, MIPI DSI, LVDS, etc.
i.MX9131:
- Support 2.4GT/s DDR and HWFFC at 1.2GT/s
i.MX9121:
- A55 at 800Mhz and DDR at 1600MTS, with low drive mode.
i.MX9111:
- Support 1.6GT/s DDR and HWFFC at 800MT/s
i.MX9101:
- Support 800Mhz ARM clock
- Support 1.6GT/s DDR and HWFFC at 800MT/s
- No parallel display, eQOS, flexcan
Updated Clock/Container/CPU and etc for i.MX91
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Patrick Rudolph <patrick.rudolph@9elements.com> says:
Based on the existing work done by Simon Glass this series adds
support for booting aarch64 devices using ACPI only.
As first target QEMU SBSA support is added, which relies on ACPI
only to boot an OS. As secondary target the Raspberry Pi4 was used,
which is broadly available and allows easy testing of the proposed
solution.
The series is split into ACPI cleanups and code movements, adding
Arm specific ACPI tables and finally SoC and mainboard related
changes to boot a Linux on the QEMU SBSA and RPi4. Currently only the
mandatory ACPI tables are supported, allowing to boot into Linux
without errors.
The QEMU SBSA support is feature complete and provides the same
functionality as the EDK2 implementation.
The changes were tested on real hardware as well on QEMU v9.0:
qemu-system-aarch64 -machine sbsa-ref -nographic -cpu cortex-a57 \
-pflash secure-world.rom \
-pflash unsecure-world.rom
qemu-system-aarch64 -machine raspi4b -kernel u-boot.bin -cpu cortex-a72 \
-smp 4 -m 2G -drive file=raspbian.img,format=raw,index=0 \
-dtb bcm2711-rpi-4-b.dtb -nographic
Tested against FWTS V24.03.00.
Known issues:
- The QEMU rpi4 support is currently limited as it doesn't emulate PCI,
USB or ethernet devices!
- The SMP bringup doesn't work on RPi4, but works in QEMU (Possibly
cache related).
- PCI on RPI4 isn't working on real hardware since the pcie_brcmstb
Linux kernel module doesn't support ACPI yet.
Link: https://lore.kernel.org/r/20241023132116.970117-1-patrick.rudolph@9elements.com
When ACPI is enabled over FDT the APs cannot be brought out of reset
by the OS using the "FDT spin-table" mechanism, as no FDT is provided
to the OS. The APs must be released out of reset in u-boot and then
brought up in an ACPI compliant fashion.
When ARMV8_MULTIENTRY is specified, the APs are released from reset
and will enter U-Boot after it has been relocated as well.
By default ARMV8_MULTIENTRY is not selected, keeping existing behaviour.
TEST: All APs enter U-Boot when run on qemu-system-aarch64 and on
real hardware.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Matthias Brugger <mbrugger@suse.com>
Cc: Peter Robinson <pbrobinson@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Fill the MADT table in the GIC driver and armv8 CPU driver to
drop SoC specific code. While the GIC only needs devicetree
data, the CPU driver needs additional information stored in
the cpu_plat struct.
While on it update the only board making use of the existing
drivers and writing ACPI MADT in mainboard code.
TEST: Booted on QEMU sbsa-ref using GICV3 driver model generated MADT.
Booted on QEMU raspb4 using GICV2 driver model generated MADT.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Add a generic driver that binds to armv8 CPU nodes. The generic driver allows
- to enumerate CPUs present in a system, even when no other driver binds it
- generates ACPI SSDT code for each CPU
- Fill the ACPI MADT table (implemented in a follow up patch)
The newly introduced code could also be reused on other CPU drivers that are
compatible with armv8.
TEST: Booted on QEMU sbsa and verify the driver binds to CPU nodes.
Confirmed with FWTS that all ACPI processor devices are present.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
U-Boot device tree is padded just after U-Boot proper.
After the whole stuff loaded to DRAM space, the device tree
area is conflict with BSS region before U-Boot relocation.
So any write to BSS area before reloc_fdt will corrupt the
device tree. Without the fix, there is issue that “binman_init
failed:-2” on i.MX8MP-EVK board.
Drop 'revision' and use malloc area in cpu_imx_plat->rev.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add support for iMX93 low performance parts 9302 and 9301 which
restrict to low drive voltage only.
The parts run A55 max speed at 900Mhz and M33 at 133Mhz, have NPU
and A55 core1 (9301) disabled.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Increase one more bit to cover all CPU types. Otherwise it shows
wrong CPU info on some platforms, such as i.MX8M Plus:
U-Boot 2024.04+g674440bc73e+p0 (Jun 06 2024 - 10:05:34 +0000)
CPU: NXP i.MX8MM Rev1.1 A53 at 4154504685 MHz at 30C
Model: NXP i.MX8MPlus LPDDR4 EVK board
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
The cpu_freq stores the current CPU frequency in Hz.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Add a new callback release_core to the cpu_ops, which is used to
release a CPU core to run baremetal or RTOS application on a SoC
with multiple CPU cores.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Jiaxun Yang <jiaxun.yang@flygoat.com> says:
Hi all,
This series enabled qemu-xtensa board.
For dc232b CPU it needs to be built with toolchain[1].
This is a side product of me investigating architectures
physical address != virtual address in U-Boot. Now we can
get it covered under CI and regular tests.
VirtIO devices are not working as expected, due to U-Boot's
assumption on VA == PA everywhere, I'm going to get this fixed
later.
My Xtensa knowledge is pretty limited, Xtensa people please
feel free to point out if I got anything wrong.
Thanks
[1]: https://github.com/foss-xtensa/toolchain/releases/download/2020.07/x86_64-2020.07-xtensa-dc232b-elf.tar.gz
Implement various CPU related functions.
I'm actually just using it to get cpu clock frequency.
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Raymond Mao <raymond.mao@linaro.org> says:
This patch set is picked from the previously posted serie:
"[RFC] Integrate MbedTLS v3.6 LTS with U-Boot"
They are not directly related to MbedTLS integration, but the
prerequisite for a few clean-up, refactoring and minor fixes.
For V2, the linker script patch is dropped and added one patch
to move the snprintf to stdio.h
Move snprintf to stdio.h since it is needed by exteranl libraries.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d, reversing
changes made to 2ee6f3a5f7.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Without the NULL check, if the devicetree that u-boot loads does not have a
compatible property then a store access fault will be raised and force the
machine to reset, due to the NULL pointer we passed to strlen. This commit
adds this check and will return -ENOSPC to indicate the get_desc failed.
Signed-off-by: Hanyuan Zhao <zhaohy22@mails.tsinghua.edu.cn>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
cpu_get_desc() for the RISC-V CPU currently reads "riscv,isa" to get
the description, but it is no longer a required property and cannot be
assummed to always be present, as the new "riscv,isa-extensions" and
"riscv,isa-base" properties may be present instead.
On RISC-V, cpu_get_desc() has two main uses - firstly providing an
informational name for the CPU for smbios or at boot with
DISPLAY_CPUINFO etc and secondly it forms the basis of ISA extension
detection in supports_extension() as it returns (a portion of) an ISA
string.
cpu_get_desc() returns a string, which aligned with "riscv,isa" but
the new property is a list of strings. Rather than add support for
the list of strings property, which would require creating an isa
string from "riscv,isa-extensions", modify the RISC-V CPU's
implementaion of cpu_get_desc() return the first compatible as the
cpu description instead. This may be fine for the informational cases,
but it would break extension dtection, given supports_extension()
expects cpu_get_desc() to return an ISA string.
Call dev_read_string() directly in supports_extension() to get the
contents of "riscv,isa" so that extension detection remains functional.
As a knock-on affect of this change, extension detection is no longer
broken for long ISA strings. Previously if the ISA string exceeded the
32 element array that supports_extension() passed to cpu_get_desc(),
it would return ENOSPC and no extensions would be detected.
This bug probably had no impact as U-Boot does not currently do anything
meaningful with the results of supports_extension() and most SoCs
supported by U-Boot don't have anywhere near that complex of an ISA
string. The QEMU virt machine's CPUs do however, so extension detection
doesn't work there.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
For RISC-V CPUs the SMBIOS Processor ID field contains
the Machine Vendor ID from CSR mvendorid.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The SMBIOS specification requires to set the processor family in the type 4
(Processor Information) table to specific values depending only on the
bitness of the system (0x200 for RV32 and 0x201 for RV64).
With this patch dmidecode shows
Handle 0x0004, DMI type 4, 48 bytes
Processor Information
Socket Designation: Not Specified
Type: Central Processor
Family: RV64
for qemu-riscv64_smode_defconfig.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The last user of the NEEDS_MANUAL_RELOC has been removed in commit
26af162ac8 ("arch: m68k: Implement relocation")
Remove now unused NEEDS_MANUAL_RELOC code.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Very few of the existing event-spy records use the arguments they are
passed. Update them to use a simple spy instead, to simplify the code.
Where an adaptor function is currently used, remove it where possible.
Signed-off-by: Simon Glass <sjg@chromium.org>
According to datasheet, iMX93 has fused parts with CORE1 or NPU or
both disabled. So update code to support it, the kernel device tree
runtime update will be added in future patches.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Move imx8 sci header file to include/firmware/imx, then we could
use build macro to reuse some i.MX8 drivers for i.MX9, such as
drivers/cpu/imx8_cpu.c.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stefano Babic <sbabic@denx.de>
The original function was only called once, before relocation. The new
one is called again after relocation. This was not the intent of the
original call. Fix this by renaming and updating the calling logic.
With this, chromebook_link64 makes it through SPL.
Fixes: 7fe32b3442 ("event: Convert arch_cpu_init_dm() to use events")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The event framework is just that, a framework. Enabling it by itself
does nothing, so we shouldn't ask the user about it. Reword (and correct
typos) around this the option and help text. This also applies to
DM_EVENT and EVENT_DYNAMIC. Only EVENT_DEBUG and CMD_EVENT should be
visible to the user to select, when EVENT is selected.
With this, it's time to address the larger problems. When functionality
uses events, typically via EVENT_SPY, the appropriate framework then
must be select'd and NOT imply'd. As the functionality will cease to
work (and so, platforms will fail to boot) this is non-optional and
where select is appropriate. Audit the current users of EVENT_SPY to
have a more fine-grained approach to select'ing the framework where
used. Also ensure the current users of event_register and also select
EVENT_DYNAMIC.
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reported-by: Oliver Graute <Oliver.Graute@kococonnector.com>
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Fixes: 7fe32b3442 ("event: Convert arch_cpu_init_dm() to use events")
Fixes: 42fdcebf85 ("event: Convert misc_init_f() to use events")
Fixes: c5ef202557 ("dm: fix DM_EVENT dependencies")
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Fabio Estevam <festevam@denx.de>
We already have a function for probing all devices of a specific class,
use it.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add basic CPU driver used to retrieve CPU model information.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Check snprintf() return value for errors.
Make microblaze_cpu_get_desc() directly return snprintf() error code if
ret < 0. Otherwise, if the return value is greater than or equal to size,
the resulting string is truncated, so return -ENOSPC.
Fixes: 816226d27e ("cpu: add CPU driver for microblaze")
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220829170205.1274484-2-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Add a basic CPU driver that retrieves information about the microblaze CPU
core. cpu_ops handlers are implemented so that the "cpu" command can work
properly:
U-Boot-mONStR> cpu list
0: cpu@0 MicroBlaze @ 50MHz, Rev: 11.0, FPGA family: zynq7000
U-Boot-mONStR> cpu detail
0: cpu@0 MicroBlaze @ 50MHz, Rev: 11.0, FPGA family: zynq7000
ID = 0, freq = 50 MHz: L1 cache, MMU
Note: cpu_ver_lookup[] and family_string_lookup[] arrays were imported from
linux.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-14-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Relocate cpu_ops pointers when CONFIG_NEEDS_MANUAL_RELOC is enabled.
The (gd->flags & GD_FLG_RELOC) check was added to make sure the reloc_done
logic works for drivers that use DM_FLAG_PRE_RELOC.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-2-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
It looks quite weird that for non PPC platforms cpu driver for MPC83xx can
be selected. That's why define proper dependency.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
The cpu nodes in arch/sandbox/dts/test.dts should conform to the devicetree
specification:
* property device_type must be set to "cpu"
* the reg property must be provided
* the cpu nodes must have an address
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
The crystal, CPU and master clock were not displayed correctly on SAM9X60
after adding CCF clock support. Add compatible for ARM926EJ-S to fix
this.
Reported-by: Eugen Hristev <eugen.hristev@microchip.com>
Fixes: a64862284f ("clk: at91: sam9x60: add support compatible with CCF")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Define LOG_CATEGORY for all uclass to allow filtering with
log command.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
