Use the marketing name for model name, this matches the dt-binding.
Also update the website url in copyright.
Fixes: 50decd493c83 ("arm64: dts: rockchip: Add FriendlyARM NanoPi R3S board")
Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20241022193537.1117919-2-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: b5bf84206a5c77528f9dd4cbca4e72caa063c102 ]
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Change to use FIT and FIT_SIGNATURE when loading U-Boot proper in SPL to
allow checksum validation and fallback loading of FIT from a different
mmc device.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
For some reason the Ethernet PHY reset delay is set to 1 second, this
cause an unneccecery long boot delay.
Firefly-RK3288 use RTL8211 Ethernet PHY, datasheet list an initial 10ms
delay and then a 30-76ms delay before accessing registers.
Change to use 80ms delay instead of a full second to speed up Ethernet
initializion in U-Boot.
Also enable PHY_REALTEK, DM_ETH_PHY and PHY_GIGE to improve Ethernet PHY
support in U-Boot.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The device tree for Firefly-RK3288 in dts/upstream can be used as-is by
U-Boot, migrate board to use OF_UPSTREAM.
Add chosen stdout-path prop to board u-boot.dtsi as it is missing in DT
from dts/upstream. Also change to use the upstream power_led symbol.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
After the migration to use standard boot, storage media devices should
automatically be initialized in the order listed in boot_targets env.
Drop USE_PREBOOT to speed up boot when booting from SD-card or eMMC.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Current use of SILENT_CONSOLE hide valuable information when something
goes wrong during boot, drop this Kconfig option to allow user to see
e.g. from what media U-Boot proper is loaded from.
A second Model line is printed on console due to DISPLAY_BOARDINFO_LATE,
drop this Kconfig option to remove the second redundant line.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add bootph props and enable related Kconfig options to include the sdmmc
regulator in SPL. Also enable SPL_DM_SEQ_ALIAS to ensure aliases is
handled correctly in SPL.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add bootph- props to emmc, sdmmc, uart and related pinctrl nodes to
ensure devices and pinctrl can be used in xPL and U-Boot pre-reloc.
Remove the explicit bootph-all prop from the pinctrl node, any bootph-
prop will automatically be propagated to the pinctrl node.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Migrate to use common bss, stack and malloc heap size and addresses to
unify memory use in TPL, SPL and pre-reloc.
ENV_OFFSET is using the default value of 0x3f8000 and is also dropped.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Enable Kconfig options to read cpuid from efuse and set cpuid#, serial#
and ethaddr env vars based on the value read from efuse.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Sort the nodes in rk3288-firefly-u-boot.dtsi in alphabetical order.
This has no intended change to board DT, this only rearrange nodes in
preparation for future changes.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The firefly-rk3288_defconfig build target does not enable the SPL_LED
Kconfig option.
Drop the unused SPL_LED related code and replace it with a default-state
prop to ensure the LED driver enable the LED at U-Boot proper phase.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The boot timing and reporting (bootstage) infrastructure is useful for
performance analysis and debug but adds overhead and console noise when
using the device normally. Remove it from the device config.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The reset mechanism used by Linux to reset the SoC is known to only
partially reset the logic. A mechanism is implemented in
rk3399_force_power_on_reset to use a GPIO connected to the PMIC's
over-temperature (OTP) reset pin, which fully resets all logic.
Hook the associated GPIO where the function expects it to enable this
reset mechanism and avoid any possible side-effect of partially-reset
units.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
The reset mechanism used by Linux to reset the SoC is known to only
partially reset the logic. A mechanism is implemented in
rk3399_force_power_on_reset to use a GPIO connected to the PMIC's
over-temperature (OTP) reset pin, which fully resets all logic.
Hook the associated GPIO where the function expects it to enable this
reset mechanism and avoid any possible side-effect of partially-reset
units.
Without this patch, reading from the micro sd slot fails after a reset.
With this mechanism, U-Boot is able to boot from it reliably.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Khadas Edge2 is a Rockchip RK3588S based SBC (Single Board Computer)
by Khadas.
There are tree variants depending on the DRAM size : 8G and 16G.
Specification:
Rockchip RK3588S SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16GB memory LPDDR4x
Mali G610MP4 GPU
3x MIPI CSI 4x lanes
2x MIPI-DSI DPHY 4x lanes
32/64GB eMMC
1x USB 2.0, 1x USB 3.0, 2x USB-Type-C
1x HDMI 2.1 output, 1x DP 1.4 output
USB PD over USB Type-C
Kernel commit:
04d552993522 ("arm64: dts: rockchip: Add Khadas edge2 board")
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Change to use FIT and FIT_SIGNATURE when loading U-Boot proper in SPL to
allow checksum validation and fallback loading of FIT from a different
mmc device.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
For some reason the Ethernet PHY reset delay is set to 1 second, this
cause an unneccecery long boot delay.
MiQi use RTL8211 Ethernet PHY, datasheet list an initial 10ms delay and
then a 30-76ms delay before accessing registers.
Change to use 80ms delay instead of a full second to speed up Ethernet
initializion in U-Boot.
Also enable PHY_REALTEK, DM_ETH_PHY and PHY_GIGE to improve Ethernet PHY
support in U-Boot.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The device tree for mqmaker MiQi in dts/upstream can be used as-is by
U-Boot, migrate board to OF_UPSTREAM.
The change to use DT from dts/upstream will include minor changes and
fixes related to work led and usb otg.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
After the migration to use standard boot, storage media devices should
automatically be initialized in the order listed in boot_targets env.
Drop USE_PREBOOT to speed up boot when booting from SD-card or eMMC.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Current use of SILENT_CONSOLE hide valuable information when something
goes wrong during boot, drop this Kconfig option to allow user to see
e.g. from what media U-Boot proper is loaded from.
A second Model line is printed on console due to DISPLAY_BOARDINFO_LATE,
drop this Kconfig option to remove the second redundant line.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add bootph props and enable related Kconfig options to include the sdmmc
regulator in SPL. Also enable SPL_DM_SEQ_ALIAS to ensure aliases is
handled correctly in SPL.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add bootph- props to emmc, sdmmc, uart and related pinctrl nodes to
ensure devices and pinctrl can be used in xPL and U-Boot pre-reloc.
Remove the explicit bootph-all prop from the pinctrl node, any bootph-
prop will automatically be propagated to the pinctrl node.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Migrate to use TPL, common bss, stack and malloc heap size and addresses
to unify memory use in TPL, SPL and pre-reloc.
ENV_OFFSET is using the default value of 0x3f8000 and is also dropped.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Enable Kconfig options to read cpuid from efuse and set cpuid#, serial#
and ethaddr env vars based on the value read from efuse.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The work led is not used in xPL on rk3288-miqi, remove bootph props from
the work led node to exclude it from xPL control FDT.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Sort the nodes in rk3288-miqi-u-boot.dtsi in alphabetical order.
This has no intended change to board DT, this only rearrange nodes in
preparation for future changes.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Change to use FIT and FIT_SIGNATURE when loading U-Boot proper in SPL to
allow checksum validation and fallback loading of FIT from a different
mmc device.
Checksum validation of FIT adds around 140 ms to boot time:
Before:
Mark Elapsed Stage
0 0 reset
13 13 TPL
6,957 6,944 end tpl
25,102 18,145 SPL
131,932 106,830 end phase
132,137 205 board_init_f
444,277 312,140 board_init_r
1,404,987 960,710 eth_common_init
1,519,110 114,123 eth_initialize
1,524,734 5,624 main_loop
1,525,452 718 cli_loop
After:
Mark Elapsed Stage
0 0 reset
13 13 TPL
6,957 6,944 end tpl
35,744 28,787 SPL
271,220 235,476 end phase
271,420 200 board_init_f
588,474 317,054 board_init_r
1,548,950 960,476 eth_common_init
1,663,105 114,155 eth_initialize
1,668,734 5,629 main_loop
1,669,417 683 cli_loop
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
For some reason the Ethernet PHY reset delay is set to 1 second, this
cause an unneccecery long boot delay.
Tinker Board use RTL8211E or RTL8211F Ethernet PHY, datasheet list an
initial 10ms delay and then a 30-76ms delay before accessing registers.
Change to use 80ms delay instead of a full second to speed up Ethernet
initializion in U-Boot.
Also enable PHY_REALTEK, DM_ETH_PHY and PHY_GIGE to improve Ethernet PHY
support in U-Boot.
Before:
1,404,971 960,924 eth_common_init
2,438,830 1,033,859 eth_initialize
2,444,449 5,619 main_loop
2,445,153 704 cli_loop
After:
1,404,987 960,710 eth_common_init
1,519,110 114,123 eth_initialize
1,524,734 5,624 main_loop
1,525,452 718 cli_loop
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The device tree for ASUS Tinker Board and S variant in dts/upstream can
be used as-is by U-Boot, migrate board to OF_UPSTREAM.
The change to use DT from dts/upstream will include minor changes and
fixes related to leds and regulators.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
After the migration to use standard boot, storage media should
automatically be initialized in the order listed in boot_targets env.
Drop USE_PREBOOT to speed up boot with ~12 seconds when booting from
e.g. SD-card or eMMC.
Before:
3,048,599 2,056 main_loop
3,050,717 2,118 usb_start
15,070,499 12,019,782 cli_loop
After:
3,058,244 2,054 main_loop
3,063,260 5,016 cli_loop
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Current use of SILENT_CONSOLE hide valuable information when something
goes wrong during boot, drop this Kconfig option to allow user to see
e.g. from what media U-Boot proper is loaded from.
A second Model line is printed on console due to DISPLAY_BOARDINFO_LATE,
drop this Kconfig option to remove the second redundant line.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Migrate to use common bss, stack and malloc heap size and addresses to
unify memory use in TPL, SPL and pre-reloc.
Ensure SYS_MALLOC_F_LEN and TPL variant stay at 0x2000 and is unaffected
on other boards not changed to use common malloc heap size.
ENV_OFFSET is using the default value of 0x3f8000 and is also dropped.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add missing Kconfig options used by the rk3288-tinker-s variant.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Enable MISC_INIT_R and ROCKCHIP_EFUSE to read cpuid from efuse and set
the cpuid# and serial# env vars.
Change to read mac address from eeprom in rockchip_early_misc_init_r()
to ensure the ethaddr env var is set before rockchip_setup_macaddr() try
to set ethaddr based on cpuid.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Include mmc related nodes in U-Boot proper pre-reloc phase to ensure
environment can be loaded from mmc devices.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The sdmmc power come from vcc33_sd pmic regulator and not from the
vcc_sd fixed regulator, as currently defined in the in-tree DT.
Drop vcc_sd and the related gpio7 and sdmmc_pwr nodes from being
included in SPL along with any related Kconfig option. Also enable
SPL_DM_SEQ_ALIAS to ensure aliases is handled correctly in SPL.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Drop the unneeded bootph-all prop from dmc node, it is already defined
in soc u-boot.dtsi.
Remove booth-all prop from gpio7 node, this node is not needed in TPL.
Adjust bootph props to include pinctrl related nodes for UART2.
Remove the explicit bootph-all prop from the pinctrl node, any bootph-
prop will automatically be propagated to the pinctrl node.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Sort the nodes in rk3288-tinker u-boot.dtsi files in alphabetical order.
This has no intended change to board DTs and only rearrange nodes in
preparation for future changes.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add myself as a reviewer for Tinker Board and S variant so that I can
help with review and testing of defconfig and device tree changes.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The vop nodes does not need to be included in xPL control FDT, they only
need to be included at U-Boot proper pre-reloc phase.
Change to use bootph-some-ram prop to fix this.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
rk3288.dtsi from arch/arm/dts is almost identical to the rk3288.dtsi
from dts/upstream, it differs only with a minor change in hdmi port
nodes, something that does not affect U-Boot.
Remove arch/arm/dts/rk3288.dtsi to use rk3288.dtsi from dts/upstream.
Also drop gpio aliases from -u-boot.dtsi that has been part of
rk3288.dtsi for some time.
No functional change to board DTs is intended with this removal.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The SCLK_MAC_PLL id is not exported or referenced upstream. It is also
not referenced in vendor U-Boot or vendor kernel 4.4, 4.19, 5.10 or 6.1.
Relax the check for parent id SCLK_MAC_PLL when using internal clock
source for gmac to allow use of clock/rk3288-cru.h from dts/upstream.
All in-tree and upstream rk3288 DTs use an external clock as parent,
so no functional change to boards is expected with this change.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
power/rk3288-power.h in include/dt-bindings is identical to the version
in dts/upstream, remove the copy from include/dt-bindings to only use
the version from dts/upstream.
No functional change to board DTs is intended with this removal.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
With the commit 4fcba5d556 ("regulator: implement basic reference
counter") the return value of regulator_set_enable may be EALREADY or
EBUSY for fixed/gpio regulators.
Change to use the more relaxed regulator_set_enable_if_allowed to
continue if regulator already was enabled or disabled.
Based on 335799b725 ("usb: dwc2: Use regulator_set_enable_if_allowed")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
