Add CMD_FUSE_WRITEBUFF config option to add and enable fuse writebuff
sub-system command. Add fuse_writebuff function to be invoked on
writebuff command.
Signed-off-by: Harsha Vardhan V M <h-vm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Remove custom string functions and replace them with normal string
functions. Remove the custom strtou32 and replace it with
simple_strtoul.
Signed-off-by: Harsha Vardhan V M <h-vm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass <sjg@chromium.org> says:
This series includes some patches related to allowing read_all() to be
used with the extlinux / PXE bootmeths.
These patches were split out from the stb4 series, since it will need to
have additional patches for LWIP, to avoid breaking PXE booting when
LWIP is used.
Link: https://lore.kernel.org/r/20250306002533.2380866-1-sjg@chromium.org
Add a new netboot_run() function which can be used for simple network
operations, such as loading a file. Put the implementation in an
internal function, used by the existing code.
Place this function into the net/ code, so that it does not need the
command line to be available.
Document which network operations are supported, i.e. a limited subset,
for now.
For the one board which uses lwip, it is not quite clear how to avoid
using the cmdline interface. This will need some discussion.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the core code for starting an netboot operation into a separate
function, so that we can (with additional work) move towards calling it
from outside the file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than setting global variables, return the size, if provided. For
tftput, use the addr argument to store the save address, to avoid adding
yet another parameter.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than updating the global, update the value of some parameters,
so the action of the function is simpler.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than updating the global, update the value of a parameter, so the
action of the function is simpler.
Signed-off-by: Simon Glass <sjg@chromium.org>
This function repeats the same code in a few places, namely setting
net_boot_file_name_explicit and copying of the filename to
net_boot_file_name
Move these two operations to the caller, with just the filename (or
NULL) returned by parse_args()
This makes things a little easier to follow.
Signed-off-by: Simon Glass <sjg@chromium.org>
This function is a bit vague as to what it does. Expand the comment a
little, to specify which args are provided and which variables are
updated.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The address of the bzImage is not recorded in the bootflow, so we cannot
actually locate the version at present. Handle this case, to avoid
showing invalid data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than holding the state in the implementation code, move it to the
command code. The state is now passed to the implementation functions
and can there (with future work) be pass in from bootstd, without going
through the commands.
Signed-off-by: Simon Glass <sjg@chromium.org>
While the code was removed in commit 3766a249a3 ("fs: drop reiserfs")
this reference in the Makefile was missed. Remove it now.
Fixes: 3766a249a3 ("fs: drop reiserfs")
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
-----BEGIN PGP SIGNATURE-----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=xGcd
-----END PGP SIGNATURE-----
Merge tag 'v2025.04-rc4' into next
This uses Heinrich's merge of lib/efi_loader/efi_net.c which results in
no changes.
Gabriel Dalimonte <gabriel.dalimonte@gmail.com> says:
This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().
One of the use cases for renaming in EFI is to facilitate boot loader
boot counting.
No existing filesystems in U-Boot currently include file renaming,
resulting in support for renaming at the filesystem level and a
concrete implementation for the FAT filesystem.
Link: https://lore.kernel.org/r/20250217182648.31294-1-gabriel.dalimonte@gmail.com
The implementation roughly follows the POSIX specification for
rename() [1]. The ordering of operations attempting to minimize the chance
for data loss in unexpected circumstances.
The 'mv' command was implemented as a front end for the rename operation
as that is what most users are likely familiar with in terms of behavior.
The 'FAT_RENAME' Kconfig option was added to prevent code size increase on
size-oriented builds like SPL.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
Fixed the building failures when WGET_HTTPS,NET_LWIP and MBEDTLS_LIB
are selected due to a few incorrect kconfig dependencies.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Currently, the 8-bit escapes are being used, which aren't supported by
vidconsole_escape_char. Since the current usage maps directly to the
3-bit equivalents anyway, let's use those instead.
With this change, the fetch output looks as fetching in the vidconsole
as it does over serial!
Signed-off-by: Sam Day <me@samcday.com>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Tested-by: Ferass El Hafidi <funderscore@postmarketos.org>
Judith Mendez <jm@ti.com> says:
Some K3 devices like am62x and am64x have a M4 processor in the MCU
voltage domain. This patch series introduces remoteproc M4 driver which
will be used to load firmware into and start the M4 remote core.
This series also adds support for R5F cores on am64x SoCs in patch 2 and
sets up environment to load FW in remote cores in patch 3,4,5.
This patch series also enables remoteproc drivers by default as per what
remoteproc sybsystem is supported per SoC, thus all remoteproc options
are now deleted in configs/* since they are no longer required.
This patch series was tested on am64x EVM, am62x SK, am62ax SK,
am62px SK boards.
Any additional tested by's are welcome since I was not able to
test any additional boards.
Tested by running the following commands in u-boot prompt:
=> setenv dorprocboot 1
=> run boot_rprocs
Link: https://lore.kernel.org/r/20250210202944.1071931-1-jm@ti.com
Enable CMD_REMOTEPROC by default if building for K3 ARCH so
that it does not have to be defined in each board defconfig
file.
Signed-off-by: Judith Mendez <jm@ti.com>
net/lwip/wget.c/mbedtls_hardware_poll() is calling dm_rng_read() but
dependency is not recorded anywhere that's why depend on DM_RNG
when WGET_HTTPS is used.
Suggested-by: Michal Simek <michal.simek@amd.com>
Co-developed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
* Remove invalid memory leak tests
Link: https://lore.kernel.org/r/20250203151029.60265-1-heinrich.schuchardt@canonical.com
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Adding new symbol for the fpga loadb command which is exclusive to
Xilinx. Default value is y for backward compatibility.
Clarify the type of file used for fpga programming commands
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Link: https://lore.kernel.org/r/20250121130138.1999916-6-ibai.erkiaga-elorza@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Ensure all Xilinx exclusive fpga commands have a KConfig symbol and
dependency to FPGA_XILINX listed. Remove (Xilinx only) text from the
help command.
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Link: https://lore.kernel.org/r/20250121130138.1999916-5-ibai.erkiaga-elorza@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Current usage information for loads command is too verbose and long for
a command usage prompt. This flag simplifies the text for readability
purposes.
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Link: https://lore.kernel.org/r/20250121130138.1999916-3-ibai.erkiaga-elorza@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
The current implementation generates some alignment issues as well as
some overlapping when all the fpga command options are enabled. The fix
is intended to improve readability of the usage info.
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Acked-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20250121130138.1999916-2-ibai.erkiaga-elorza@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Bhyve is the hypervisor used by FreeBSD.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
TPM2_PCR_Allocate command is required to reconfigure a TPM device
to enable or disable algorithms in run-time, thus this patch introduces
the implementation of PCR allocate APIs and adds related cmd functions
for testing.
To test the feature, ensure that TPM is started up.
Run pcr_allocate command to turn on/off an algorithm, multiple calls
are supported and all changes will be cached:
`tpm2 pcr_allocate <algorithm_name> <on|off>`
Run startup command with argument 'off' to shutdown the TPM.
`tpm2 startup TPM2_SU_CLEAR off`
Reboot the board via `reset` to activate the changes.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
TPM2_shutdown command is sharing same structure and logics with
TPM2_startup, thus this patch extends the existing startup APIs and
cmd functions to support shutdown instead of created new ones.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Up to now we could only use log level, category, and file for filtering.
Allow filtering on a list of functions.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This function is really just getting the data. The size comes along for
the ride. In fact this function is only reliable way to obtain the data
for an image in a FIT, since the FIT may use external data.
Rename it to fit_image_get_data()
Signed-off-by: Simon Glass <sjg@chromium.org>
When looking at ufetch output it isn't immediately obvious which CPU
architecture the presented board has. This patch therefore adds the
CPU architecture string (for example "powerpc") to the "CPU:" line.
The new format is:
CPU: powerpc (1 cores, 1 in use)
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20241211-ufetch-v2-3-2b5432ffaeb1@posteo.net
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The ufetch command is still quite useful on systems without block
device support; remove the CONFIG_BLK dependency and make sure the code
compiles/works with and without CONFIG_BLK.
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20241211-ufetch-v2-2-2b5432ffaeb1@posteo.net
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
On 32-bit architectures, LAST_LINE (_LAST_LINE - 1UL) is 64 bits long,
but size_t (from ARRAY_SIZE(...)) is 32 bits. This results in a warning
because the max() macro expects the same type on both sides:
cmd/ufetch.c: In function ‘do_ufetch’:
include/linux/kernel.h:179:24: warning: comparison of distinct pointer types lacks a cast [-Wcompare-distinct-pointer-types]
179 | (void) (&_max1 == &_max2); \
| ^~
cmd/ufetch.c:92:25: note: in expansion of macro ‘max’
92 | int num_lines = max(LAST_LINE + 1, ARRAY_SIZE(logo_lines));
| ^~~
Fix this by casting LAST_LINE to size_t.
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20241211-ufetch-v2-1-2b5432ffaeb1@posteo.net
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
