Introduce a new function to update ACPI table headers.
This allows to simplify the existing code.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The message "DRAM: 2 GiB (effective 32 GiB)" can be a little confusing,
modify the message s/effective/total to make it more evident.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Now that we do not need nor want people to use virt-make-fs for
filesystem tests, remove the related packages from the installation
list.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we have no users of "virt-make-fs" nor users of "sudo" for
creating disk images update the documentation. We remove packages that
are no longer required (and related text) as well as be firm in our
wording around not using "sudo".
Signed-off-by: Tom Rini <trini@konsulko.com>
The problem with using "virt-make-fs" to make a filesystem image is that
it is extremely slow. Switch to using the fs_helper functions we have
instead from the filesystem tests as these can add files to images and
are significantly faster and still do not require root access.
Signed-off-by: Tom Rini <trini@konsulko.com>
FIXME: Reword more
The problem with using "virt-make-fs" to make a filesystem image is that
it is extremely slow. Switch to using the fs_helper functions we have
instead from the filesystem tests as these can add files to images and
are significantly faster and still do not require root access.
The main change here is that our mount point directory has changed from
"test_efi_capsule" to "scratch" and so we need to update other functions
too. As the disk image that we get created doesn't have a GPT, invoke
sgdisk to do a conversion first.
Signed-off-by: Tom Rini <trini@konsulko.com>
The problem with using "virt-make-fs" to make a filesystem image is that
it is extremely slow. Switch to using the fs_helper functions we have
instead from the filesystem tests as these can add files to images and
are significantly faster and still do not require root access.
As this test already had a number of internal functions, add a
prepare_image function to do this part of the test.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
The problem with using "virt-make-fs" to make a filesystem image is that
it is extremely slow. Switch to using the fs_helper functions we have
instead from the filesystem tests as these can add files to images and
are significantly faster and still do not require root access.
Signed-off-by: Tom Rini <trini@konsulko.com>
While we can be passed an image size to use, we always called qemu-img
with 20M as the size. Fix this by using the size parameter.
Signed-off-by: Tom Rini <trini@konsulko.com>
The generic function in test_ut.py to create a disk image with partition
table can be useful outside of test_ut.py so move it to be available
more clearly.
To make this a bit more easily used library function, make use of
check_call directly rather than calling things though u_boot_utils. In
turn, to more easily handle stdin here, use the shell "printf" utility
to pass sfdisk the specification to create as we do not have an actual
file descriptor to use here.
Signed-off-by: Tom Rini <trini@konsulko.com>
The problem with using "virt-make-fs" to make a filesystem image is that
it is extremely slow. Switch to using the fs_helper functions we have
instead from the filesystem tests as these can add files to images and
are significantly faster and still do not require root access.
Signed-off-by: Tom Rini <trini@konsulko.com>
The problem with using "virt-make-fs" to make a filesystem image is that
it is extremely slow. Switch to using the fs_helper functions we have
instead from the filesystem tests as these can add files to images and
are significantly faster and still do not require root access.
Signed-off-by: Tom Rini <trini@konsulko.com>
The release commit for version v2025.04 forgot to update the next
version (i. e. v2025.07) in the section where information about the
merge window is provided.
Fixes: 34820924ed ("Prepare v2025.04")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Note that this undoes the changes of commit cf6d4535cc ("x86:
emulation: Disable bloblist for now") as that was intended only for the
release due to time.
On Ubuntu 25.04 installing the dependency pyyaml 6.0 fails with
License classifiers are deprecated
Update PyYAML to the current release.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
It has been reported that memory corruption can occurred because network
packages where received after EXIT_BOOT_SERVICES. See the thread
starting at [1].
We try to remove all drivers when EXIT_BOOT_SERVICES is called. But
* Some network drivers don't call their own stop method when removed.
* Some network drivers don't have a remove method.
* Some devices have CONFIG_DM_DEVICE_REMOVE=n.
Let's call eth_halt() in EXIT_BOOT_SERVICES explicitly.
[1]
https://lore.kernel.org/all/C101B675-EEE6-44CB-8A44-83F72182FBD6@kohlschutter.com/
Cc: Michael Brown <mcb30@ipxe.org>
Reported-by: Christian Kohlschütter <christian@kohlschutter.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Michael Brown <mcb30@ipxe.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Christian Kohlschütter <christian@kohlschutter.com>
A recent change tried to speed up EFI booting by not calling dhcp_run
from eth_bootdev_hunt() every time. PXE so far relied on that dhcp_run
call to get an IP address.
Fix that by adding a dhcp_run call to the pxe bootflow, with autoload
disabled to only get the ip address and nothing else.
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Fixes: 1f68057e03 ("net: eth_bootdev_hunt() should not run DHCP")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
S/MIME Capabilities (OID: 1.2.840.113549.1.9.15) attributes are
expected to be algorithms but neither data nor MS Inderect Data,
thus the checker for data type is incorrect.
This patch fixes a capsule authentication failure with PKCS#7
message that contains S/MIME capabilities, which formed by the EDK2
GenerateCapsule tool.
S/MIME Capabilities are not common attributes in an EFI capsule,
thus this failure cannot be reproduced with the capsules generated
via mkeficapsule.
Fixes: 7de0d155cc ("mbedtls: add PKCS7 parser porting layer")
Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
As reported by Niklas Sombert, enabling bloblist on these platforms
means that we currently don't pass SMBIOS tables on to later stages. For
the v2025.04 release, disable bloblists as that is sufficient to restore
functionality and we will address the underlying problem for the next
release.
Link: https://lore.kernel.org/u-boot/c1dc7446-d1d0-4ef2-b201-09fc612aa8db@uni-duesseldorf.de
Reported-by: Niklas Sombert <niklas.sombert@uni-duesseldorf.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Include spl.h to avoid definition errors in custom builds.
Fixes: commit bc07851897 ("board: ti: Pull redundant DDR functions to a common location and Fixup DDR size when ECC is enabled")
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Currently in j721e_init.c we check which firewalls to remove using
the board configuration (e.g CONFIG_TARGET_J721E_R5_EVM). We do this
as J721e and J7200 have different IP and firewalls but use the same
SoC definition (SOC_K3_J721E) even though they are different SoCs.
The idea was they would be similar enough that they both could use
the same SoC config to help with common code sharing. Board checks
would then be used differentiate.
This has grown far too messy to maintain any more, especially now
that there is more than one board using J721e (EVM, SK, Beagle AI64).
As differentiation is done based on board, every one of these boards
would have to have checks added for them. Instead let's split J7200
support out from J721e like how normal new SoC support is done.
This patch touches several subsystems and could not be split much better
as when we add SOC_K3_J7200 we want to make use of it in all spots that
once used the combined SOC_K3_J721E so we can turn off SOC_K3_J721E when
building for J7200 boards.
Signed-off-by: Andrew Davis <afd@ti.com>
The file k3-am62a7.dtsi is part of upstream DT and should
have been removed when migrating to OF_UPSTREAM but must
have been missed. Do this here.
Signed-off-by: Andrew Davis <afd@ti.com>
MUX_MMIO is required in SPL stage in order to boot hyperflash
successfully. Add configs to enable MUX_MMIO in SPL stage.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
MUX_MMIO is required in SPL stage in order to boot hyperflash
successfully. Add configs to enable MUX_MMIO in SPL stage.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Jeremy Compostella <jeremy.compostella@intel.com> says:
Introduces a new configuration option X86_RUN_64BIT_NO_SPL to allow
building U-Boot as a 64-bit binary without using the SPL (Secondary
Program Loader). The motivation is to simplify the boot process for
specific x86-based platforms that do not require SPL, such as those
booting directly from a 64-bit coreboot firmware.
Link: https://lore.kernel.org/r/87bjtyutkp.fsf@jcompost-mobl.amr.corp.intel.com
Create a new defconfig file called `coreboot64-no-spl_defconfig`,
tailored specifically for 64-bit X86 architecture systems that operate
without the Secondary Program Loader (SPL). This configuration takes its
inspiration from `coreboot64_defconfig`..
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This change aligns the preprocessor directive with the standard
configuration flag used for detecting 64-bit x86 architecture.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Correct the preprocessor directive used to check for 64-bit kernel
support in the `zboot_go` function. The code previously checked for
`CONFIG_X86_RUN_64BIT`, which is not the correct configuration option
for determining if the kernel should run in 64-bit mode. The correct
option is `CONFIG_X86_64`.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
As both CONFIG_X86_RUN_64BIT and X86_RUN_64BIT_NO_SPL cases run U-Boot
in 64-bit mode with the CPU fully initialized already.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This commit introduces a new configuration option X86_RUN_64BIT_NO_SPL
to allow building U-Boot as a 64-bit binary without using the SPL
(Secondary Program Loader). The motivation is to simplify the boot
process for certain x86-based platforms that do not require SPL, such as
those booting directly from a 64-bit coreboot firmware.
This update revises the `X86_RUN_64BIT` configuration to more accurately
describe its role as "32-bit SPL followed by 64-bit U-Boot." It
clarifies the sequence of operations during the boot process, where the
system transitions from a 32-bit SPL (Secondary Program Loader) to the
main 64-bit U-Boot.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Harsha Vardhan V M <h-vm@ti.com> says:
This patch series introduces the fuse writebuff sub-system command and
makes improvements to the existing fuse implementation by removing the
custom string functions. The patches are required to be applied in
sequence.
The series consists of the following changes:
Patch 1 removes custom string functions and replaces them with standard
string functions.
Patch 2 introduces fuse.rst documentation for fuse commands.
Patch 3 introduces the fuse writebuff sub-system command, allowing to
write a structured buffer in memory to fuses, and implementing the
necessary function calls.
Patch 4 enables the fuse sub-system in the K3 platform.
Patch 5 updates the fuse.rst documentation to include details about the
new fuse writebuff command.
These changes aim to improve the fuse sub-system by the removal of
custom string functions and the addition of the fuse writebuff
command improves fuse programming workflows by allowing to write a
structured buffer in memory to efuses.
Link: https://lore.kernel.org/r/20250319084714.335777-1-h-vm@ti.com
Add K3_FUSE config option to add and enable fuse sub-system
implementation function calls.
Signed-off-by: Harsha Vardhan V M <h-vm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add CMD_FUSE_WRITEBUFF config option to add and enable fuse writebuff
sub-system command. Add fuse_writebuff function to be invoked on
writebuff command.
Signed-off-by: Harsha Vardhan V M <h-vm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add documentation for the 'fuse' sub-system commands in
doc/usage/cmd/fuse.rst file.
Remove doc/README.fuse file.
Signed-off-by: Harsha Vardhan V M <h-vm@ti.com>
Remove custom string functions and replace them with normal string
functions. Remove the custom strtou32 and replace it with
simple_strtoul.
Signed-off-by: Harsha Vardhan V M <h-vm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
We currently set both and print both PXN and UXN bits when removing
execution for pages. This happens even in the existing per platform
definitions of 'struct mm_region'.
That's not entirely correct though. For stage-1 translations, if a
platform runs on a translation regime with a single privilege level or the
the translation regime supports two privilege levels and we are not
in EL1&0 with HCR_EL2.{NV, NV1} = {1, 1} only BIT54 (XN) is needed
and BIT53(PXN) is reserved 0.
Currently we support Non-Secure EL2, Non-secure EL2&0 and Non-secure
EL1&0.
We already have get_effective_el() which returns 1 if we are
- Running in EL1 so we assume an EL1 translation regime but without
checking HCR_EL2.{NV, NV1} != {1,1}
- Running in EL2 with HCR_EL2.E2H = 1
The only problem with the above is that if we are in EL1&0 and
HCR_EL2.{NV1, NV} == {1, 1}, then
- Bit[54] holds the PXN instead of the UXN
- The Effective value of UXN is 0
- Bit[53] is RES0
So let's re-use that function and set PXN only when we are in
and EL[2|1]&0 translation regime.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
-----BEGIN PGP SIGNATURE-----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=Fl5Z
-----END PGP SIGNATURE-----
Merge tag 'u-boot-amlogic-20250404' of https://source.denx.de/u-boot/custodians/u-boot-amlogic
- Check interface before comparing it in set_dfu_alt_info() to avoid
hard crash on capsule update
