mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-16 09:54:35 +00:00
omap3: omap3evm: Migrate to OF_UPSTREAM
This commit brings the omap3evm inline with the remaining OMAP3XXX variants. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
This commit is contained in:
Derald D. Woods
Tom Rini
parent
274e0c7299
commit
f85dafa9af
7 changed files with 2 additions and 695 deletions
|
|
@ -991,10 +991,6 @@ dtb-$(CONFIG_TARGET_ETHERNUT5) += ethernut5.dtb
|
|||
|
||||
dtb-$(CONFIG_TARGET_USB_A9263) += usb_a9263.dtb
|
||||
|
||||
dtb-$(CONFIG_TARGET_OMAP3_EVM) += \
|
||||
omap3-evm-37xx.dtb \
|
||||
omap3-evm.dtb
|
||||
|
||||
dtb-$(CONFIG_TARGET_DEVKIT8000) += omap3-devkit8000.dtb
|
||||
|
||||
dtb-$(CONFIG_TARGET_SAMA7G5EK) += \
|
||||
|
|
|
|||
|
|
@ -1,107 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "omap36xx.dtsi"
|
||||
#include "omap3-evm-common.dtsi"
|
||||
#include "omap3-evm-processor-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TI OMAP37XX EVM (TMDSEVM3730)";
|
||||
compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
|
||||
};
|
||||
|
||||
&omap3_pmx_core2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hsusb2_2_pins>;
|
||||
|
||||
ehci_phy_pins: pinmux_ehci_phy_pins {
|
||||
pinctrl-single,pins = <
|
||||
|
||||
/* EHCI PHY reset GPIO etk_d7.gpio_21 */
|
||||
OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
|
||||
|
||||
/* EHCI VBUS etk_d8.gpio_22 */
|
||||
OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
|
||||
>;
|
||||
};
|
||||
|
||||
/* Used by OHCI and EHCI. OHCI won't work without external phy */
|
||||
hsusb2_2_pins: pinmux_hsusb2_2_pins {
|
||||
pinctrl-single,pins = <
|
||||
|
||||
/* etk_d10.hsusb2_clk */
|
||||
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
|
||||
|
||||
/* etk_d11.hsusb2_stp */
|
||||
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
|
||||
|
||||
/* etk_d12.hsusb2_dir */
|
||||
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
|
||||
/* etk_d13.hsusb2_nxt */
|
||||
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
|
||||
/* etk_d14.hsusb2_data0 */
|
||||
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
|
||||
/* etk_d15.hsusb2_data1 */
|
||||
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
nand@0,0 {
|
||||
compatible = "ti,omap2-nand";
|
||||
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
||||
interrupt-parent = <&gpmc>;
|
||||
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
||||
<1 IRQ_TYPE_NONE>; /* termcount */
|
||||
linux,mtd-name = "hynix,h8kds0un0mer-4em";
|
||||
nand-bus-width = <16>;
|
||||
gpmc,device-width = <2>;
|
||||
ti,nand-ecc-opt = "bch8";
|
||||
|
||||
gpmc,sync-clk-ps = <0>;
|
||||
gpmc,cs-on-ns = <0>;
|
||||
gpmc,cs-rd-off-ns = <44>;
|
||||
gpmc,cs-wr-off-ns = <44>;
|
||||
gpmc,adv-on-ns = <6>;
|
||||
gpmc,adv-rd-off-ns = <34>;
|
||||
gpmc,adv-wr-off-ns = <44>;
|
||||
gpmc,we-off-ns = <40>;
|
||||
gpmc,oe-off-ns = <54>;
|
||||
gpmc,access-ns = <64>;
|
||||
gpmc,rd-cycle-ns = <82>;
|
||||
gpmc,wr-cycle-ns = <82>;
|
||||
gpmc,wr-access-ns = <40>;
|
||||
gpmc,wr-data-mux-bus-ns = <0>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "X-Loader";
|
||||
reg = <0 0x80000>;
|
||||
};
|
||||
partition@80000 {
|
||||
label = "U-Boot";
|
||||
reg = <0x80000 0x1c0000>;
|
||||
};
|
||||
partition@1c0000 {
|
||||
label = "Environment";
|
||||
reg = <0x240000 0x40000>;
|
||||
};
|
||||
partition@280000 {
|
||||
label = "Kernel";
|
||||
reg = <0x280000 0x500000>;
|
||||
};
|
||||
partition@780000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x780000 0x1f880000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -1,198 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Common support for omap3 EVM boards
|
||||
*/
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "omap-gpmc-smsc911x.dtsi"
|
||||
|
||||
/ {
|
||||
cpus {
|
||||
cpu@0 {
|
||||
cpu0-supply = <&vcc>;
|
||||
};
|
||||
};
|
||||
|
||||
/* HS USB Port 2 Power */
|
||||
hsusb2_power: hsusb2_power_reg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "hsusb2_vbus";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */
|
||||
startup-delay-us = <70000>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
/* HS USB Host PHY on PORT 2 */
|
||||
hsusb2_phy: hsusb2_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
|
||||
vcc-supply = <&hsusb2_power>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
ledb {
|
||||
label = "omap3evm::ledb";
|
||||
gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
|
||||
wl12xx_vmmc: wl12xx_vmmc {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vwl1271";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */
|
||||
startup-delay-us = <70000>;
|
||||
enable-active-high;
|
||||
vin-supply = <&vmmc2>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <2600000>;
|
||||
|
||||
twl: twl@48 {
|
||||
reg = <0x48>;
|
||||
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
||||
interrupt-parent = <&intc>;
|
||||
};
|
||||
};
|
||||
|
||||
#include "twl4030.dtsi"
|
||||
#include "twl4030_omap3.dtsi"
|
||||
#include "omap3-panel-sharp-ls037v7dw01.dtsi"
|
||||
|
||||
&backlight0 {
|
||||
gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&twl {
|
||||
twl_power: power {
|
||||
compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
|
||||
ti,use_poweroff;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <400000>;
|
||||
|
||||
/*
|
||||
* TVP5146 Video decoder-in for analog input support.
|
||||
*/
|
||||
tvp5146@5c {
|
||||
compatible = "ti,tvp5146m2";
|
||||
reg = <0x5c>;
|
||||
};
|
||||
};
|
||||
|
||||
&lcd_3v3 {
|
||||
gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */
|
||||
};
|
||||
|
||||
&lcd0 {
|
||||
enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */
|
||||
reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */
|
||||
mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */
|
||||
&gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */
|
||||
&gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */
|
||||
};
|
||||
|
||||
&mcspi1 {
|
||||
tsc2046@0 {
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <15 0>; /* gpio175 */
|
||||
pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
|
||||
vmmc-supply = <&vmmc1>;
|
||||
vqmmc-supply = <&vsim>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>;
|
||||
vmmc-supply = <&wl12xx_vmmc>;
|
||||
non-removable;
|
||||
bus-width = <4>;
|
||||
cap-power-off-card;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
wlcore: wlcore@2 {
|
||||
compatible = "ti,wl1271";
|
||||
reg = <2>;
|
||||
/* gpio_149 with uart1_rts pad as wakeirq */
|
||||
interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>,
|
||||
<&omap3_pmx_core 0x14e>;
|
||||
interrupt-names = "irq", "wakeup";
|
||||
ref-clock-frequency = <38400000>;
|
||||
};
|
||||
};
|
||||
|
||||
&twl_gpio {
|
||||
ti,use-leds;
|
||||
};
|
||||
|
||||
&twl_keypad {
|
||||
linux,keymap = <
|
||||
MATRIX_KEY(2, 2, KEY_1)
|
||||
MATRIX_KEY(1, 1, KEY_2)
|
||||
MATRIX_KEY(0, 0, KEY_3)
|
||||
MATRIX_KEY(3, 2, KEY_4)
|
||||
MATRIX_KEY(2, 1, KEY_5)
|
||||
MATRIX_KEY(1, 0, KEY_6)
|
||||
MATRIX_KEY(1, 3, KEY_7)
|
||||
MATRIX_KEY(3, 1, KEY_8)
|
||||
MATRIX_KEY(2, 0, KEY_9)
|
||||
MATRIX_KEY(2, 3, KEY_KPASTERISK)
|
||||
MATRIX_KEY(0, 2, KEY_0)
|
||||
MATRIX_KEY(3, 0, KEY_KPDOT)
|
||||
/* s4 not wired */
|
||||
MATRIX_KEY(1, 2, KEY_BACKSPACE)
|
||||
MATRIX_KEY(0, 1, KEY_ENTER)
|
||||
>;
|
||||
};
|
||||
|
||||
&usbhshost {
|
||||
port2-mode = "ehci-phy";
|
||||
};
|
||||
|
||||
&usbhsehci {
|
||||
phys = <0 &hsusb2_phy>;
|
||||
};
|
||||
|
||||
&usb_otg_hs {
|
||||
interface-type = <0>;
|
||||
usb-phy = <&usb2_phy>;
|
||||
phys = <&usb2_phy>;
|
||||
phy-names = "usb2-phy";
|
||||
mode = <3>;
|
||||
power = <50>;
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
ethernet@gpmc {
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <16 8>;
|
||||
reg = <5 0 0xff>;
|
||||
};
|
||||
};
|
||||
|
||||
&vaux2 {
|
||||
regulator-name = "usb_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
|
@ -1,224 +0,0 @@
|
|||
/*
|
||||
* Common support for omap3 EVM 35xx/37xx processor modules
|
||||
*/
|
||||
|
||||
/ {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
wl12xx_vmmc: wl12xx_vmmc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wl12xx_gpio>;
|
||||
};
|
||||
};
|
||||
|
||||
&dss {
|
||||
vdds_dsi-supply = <&vpll2>;
|
||||
vdda_video-supply = <&lcd_3v3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&dss_dpi_pins1
|
||||
&dss_dpi_pins2
|
||||
>;
|
||||
};
|
||||
|
||||
&hsusb2_phy {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ehci_phy_pins>;
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>;
|
||||
|
||||
dss_dpi_pins1: pinmux_dss_dpi_pins2 {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
||||
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
||||
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
||||
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
||||
|
||||
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
||||
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
||||
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
||||
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
||||
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
||||
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
||||
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
||||
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
||||
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
||||
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
||||
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
|
||||
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
|
||||
|
||||
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */
|
||||
OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */
|
||||
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */
|
||||
OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */
|
||||
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */
|
||||
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc1_pins: pinmux_mmc1_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
|
||||
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
|
||||
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
|
||||
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
|
||||
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
|
||||
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
|
||||
OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
|
||||
OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
|
||||
OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
|
||||
OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
|
||||
>;
|
||||
};
|
||||
|
||||
/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
|
||||
mmc2_pins: pinmux_mmc2_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
|
||||
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
|
||||
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
|
||||
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
|
||||
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
|
||||
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
|
||||
OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */
|
||||
OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */
|
||||
OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */
|
||||
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
|
||||
>;
|
||||
};
|
||||
|
||||
uart3_pins: pinmux_uart3_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
|
||||
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
|
||||
>;
|
||||
};
|
||||
|
||||
/* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */
|
||||
on_board_gpio_61: pinmux_ehci_port_select_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4)
|
||||
>;
|
||||
};
|
||||
|
||||
/* Used by OHCI and EHCI. OHCI won't work without external phy */
|
||||
hsusb2_pins: pinmux_hsusb2_pins {
|
||||
pinctrl-single,pins = <
|
||||
|
||||
/* mcspi1_cs3.hsusb2_data2 */
|
||||
OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
|
||||
/* mcspi2_clk.hsusb2_data7 */
|
||||
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
|
||||
/* mcspi2_simo.hsusb2_data4 */
|
||||
OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
|
||||
/* mcspi2_somi.hsusb2_data5 */
|
||||
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
|
||||
/* mcspi2_cs0.hsusb2_data6 */
|
||||
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
|
||||
/* mcspi2_cs1.hsusb2_data3 */
|
||||
OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Note that gpio_150 pulled high with internal pull to prevent wlcore
|
||||
* reset on return from off mode in idle.
|
||||
*/
|
||||
wl12xx_gpio: pinmux_wl12xx_gpio {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_cts.gpio_150 */
|
||||
OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */
|
||||
>;
|
||||
};
|
||||
|
||||
smsc911x_pins: pinmux_smsc911x_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_wkup {
|
||||
dss_dpi_pins2: pinmux_dss_dpi_pins1 {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
|
||||
OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
|
||||
OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
|
||||
OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
|
||||
OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
|
||||
OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_pins>;
|
||||
};
|
||||
|
||||
&mmc3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart3_pins>;
|
||||
};
|
||||
|
||||
/*
|
||||
* GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface
|
||||
* for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
|
||||
*/
|
||||
&gpio2 {
|
||||
en-usb2-port-hog {
|
||||
gpio-hog;
|
||||
gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */
|
||||
output-low;
|
||||
line-name = "enable usb2 port";
|
||||
};
|
||||
};
|
||||
|
||||
/* T2_GPIO_2 low to route GPIO_61 to on-board devices */
|
||||
&twl_gpio {
|
||||
en_on_board_gpio_61 {
|
||||
gpio-hog;
|
||||
gpios = <2 GPIO_ACTIVE_HIGH>;
|
||||
output-low;
|
||||
line-name = "en_hsusb2_clk";
|
||||
};
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */
|
||||
<5 0 0x2c000000 0x01000000>; /* CS5: 16MB for LAN9220 */
|
||||
|
||||
ethernet@gpmc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&smsc911x_pins>;
|
||||
};
|
||||
};
|
||||
|
|
@ -1,86 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "omap34xx.dtsi"
|
||||
#include "omap3-evm-common.dtsi"
|
||||
#include "omap3-evm-processor-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TI OMAP35XX EVM (TMDSEVM3530)";
|
||||
compatible = "ti,omap3-evm", "ti,omap3430", "ti,omap3";
|
||||
};
|
||||
|
||||
&omap3_pmx_core2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hsusb2_2_pins>;
|
||||
|
||||
ehci_phy_pins: pinmux_ehci_phy_pins {
|
||||
pinctrl-single,pins = <
|
||||
|
||||
/* EHCI PHY reset GPIO etk_d7.gpio_21 */
|
||||
OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
|
||||
|
||||
/* EHCI VBUS etk_d8.gpio_22 */
|
||||
OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
|
||||
>;
|
||||
};
|
||||
|
||||
/* Used by OHCI and EHCI. OHCI won't work without external phy */
|
||||
hsusb2_2_pins: pinmux_hsusb2_2_pins {
|
||||
pinctrl-single,pins = <
|
||||
|
||||
/* etk_d10.hsusb2_clk */
|
||||
OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
|
||||
|
||||
/* etk_d11.hsusb2_stp */
|
||||
OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
|
||||
|
||||
/* etk_d12.hsusb2_dir */
|
||||
OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
|
||||
/* etk_d13.hsusb2_nxt */
|
||||
OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
|
||||
/* etk_d14.hsusb2_data0 */
|
||||
OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
|
||||
/* etk_d15.hsusb2_data1 */
|
||||
OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
nand@0,0 {
|
||||
compatible = "ti,omap2-nand";
|
||||
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
||||
interrupt-parent = <&gpmc>;
|
||||
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
||||
<1 IRQ_TYPE_NONE>; /* termcount */
|
||||
linux,mtd-name = "micron,mt29f2g16abdhc";
|
||||
nand-bus-width = <16>;
|
||||
gpmc,device-width = <2>;
|
||||
ti,nand-ecc-opt = "bch8";
|
||||
|
||||
gpmc,sync-clk-ps = <0>;
|
||||
gpmc,cs-on-ns = <0>;
|
||||
gpmc,cs-rd-off-ns = <44>;
|
||||
gpmc,cs-wr-off-ns = <44>;
|
||||
gpmc,adv-on-ns = <6>;
|
||||
gpmc,adv-rd-off-ns = <34>;
|
||||
gpmc,adv-wr-off-ns = <44>;
|
||||
gpmc,we-off-ns = <40>;
|
||||
gpmc,oe-off-ns = <54>;
|
||||
gpmc,access-ns = <64>;
|
||||
gpmc,rd-cycle-ns = <82>;
|
||||
gpmc,wr-cycle-ns = <82>;
|
||||
gpmc,wr-access-ns = <40>;
|
||||
gpmc,wr-data-mux-bus-ns = <0>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
|
@ -1,73 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Common file for omap dpi panels with QVGA and reset pins
|
||||
*
|
||||
* Note that the board specifc DTS file needs to specify
|
||||
* at minimum the GPIO enable-gpios for display, and
|
||||
* gpios for gpio-backlight.
|
||||
*/
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
display0 = &lcd0;
|
||||
};
|
||||
|
||||
backlight0: backlight {
|
||||
compatible = "gpio-backlight";
|
||||
default-on;
|
||||
};
|
||||
|
||||
/* 3.3V GPIO controlled regulator for LCD_ENVDD */
|
||||
lcd_3v3: regulator-lcd-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lcd_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <70000>;
|
||||
};
|
||||
|
||||
lcd0: display {
|
||||
compatible = "sharp,ls037v7dw01";
|
||||
label = "lcd";
|
||||
power-supply = <&lcd_3v3>;
|
||||
envdd-supply = <&lcd_3v3>;
|
||||
|
||||
port {
|
||||
lcd_in: endpoint {
|
||||
remote-endpoint = <&dpi_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* Needed to power the DPI pins */
|
||||
&vpll2 {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "okay";
|
||||
port {
|
||||
dpi_out: endpoint {
|
||||
remote-endpoint = <&lcd_in>;
|
||||
data-lines = <18>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mcspi1 {
|
||||
tsc2046@0 {
|
||||
reg = <0>; /* CS0 */
|
||||
compatible = "ti,tsc2046";
|
||||
spi-max-frequency = <1000000>;
|
||||
vcc-supply = <&lcd_3v3>;
|
||||
ti,x-min = /bits/ 16 <0>;
|
||||
ti,x-max = /bits/ 16 <8000>;
|
||||
ti,y-min = /bits/ 16 <0>;
|
||||
ti,y-max = /bits/ 16 <4800>;
|
||||
ti,x-plate-ohms = /bits/ 16 <40>;
|
||||
ti,pressure-max = /bits/ 16 <255>;
|
||||
ti,swap-xy;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
|
@ -3,7 +3,7 @@ CONFIG_ARM=y
|
|||
# CONFIG_SPL_USE_ARCH_MEMSET is not set
|
||||
CONFIG_ARCH_OMAP2PLUS=y
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x4000
|
||||
CONFIG_DEFAULT_DEVICE_TREE="omap3-evm"
|
||||
CONFIG_DEFAULT_DEVICE_TREE="ti/omap/omap3-evm"
|
||||
CONFIG_TARGET_OMAP3_EVM=y
|
||||
CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
|
||||
CONFIG_SPL=y
|
||||
|
|
@ -42,10 +42,9 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
|
|||
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)"
|
||||
CONFIG_CMD_UBI=y
|
||||
# CONFIG_ISO_PARTITION is not set
|
||||
# CONFIG_SPL_EFI_PARTITION is not set
|
||||
CONFIG_SPL_PARTITION_UUIDS=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_OF_UPSTREAM=y
|
||||
CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
|
||||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_FAT=y
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue