Convert CONFIG_SPL_STACK to Kconfig

This converts the following to Kconfig:
   CONFIG_SPL_STACK

Signed-off-by: Tom Rini <trini@konsulko.com>

README

@@ -293,33 +293,6 @@ board_init_r():
 
 	SPL-specific notes:
 	- stack is optionally in SDRAM, if CONFIG_SPL_STACK_R is defined and
-		CONFIG_SPL_STACK_R_ADDR points into SDRAM
-	- preloader_console_init() can be called here - typically this is
-		done by selecting CONFIG_SPL_BOARD_INIT and then supplying a
-		spl_board_init() function containing this call
-	- loads U-Boot or (in falcon mode) Linux
-
-
-Configuration Options:
-----------------------
-
-Configuration depends on the combination of board and CPU type; all
-such information is kept in a configuration file
-"include/configs/<board_name>.h".
-
-Example: For a TQM823L module, all configuration settings are in
-"include/configs/TQM823L.h".
-
-
-Many of the options are named exactly as the corresponding Linux
-kernel configuration options. The intention is to make it easier to
-build a config tool - later.
-
-- ARM Platform Bus Type(CCI):
-		CoreLink Cache Coherent Interconnect (CCI) is ARM BUS which
-		provides full cache coherency between two clusters of multi-core
-		CPUs and I/O coherency for devices and I/O masters
-
 		CONFIG_SYS_FSL_HAS_CCI400
 
 		Defined For SoC that has cache coherent interconnect
@@ -1659,9 +1632,6 @@ The following options need to be configured:
 		CONFIG_SPL_BSS_START_ADDR
 		Link address for the BSS within the SPL binary.
 
-		CONFIG_SPL_STACK
-		Adress of the start of the stack SPL will use
-
 		CONFIG_SPL_PANIC_ON_RAW_IMAGE
 		When defined, SPL will panic() if the image it has
 		loaded does not have a signature.
@@ -1675,8 +1645,6 @@ The following options need to be configured:
 		CONFIG_SPL_RELOC_STACK
 		Adress of the start of the stack SPL will use after
 		relocation.  If unspecified, this is equal to
-		CONFIG_SPL_STACK.
-
 		CONFIG_SYS_SPL_MALLOC_START
 		Starting address of the malloc pool used in SPL.
 		When this option is set the full malloc is used in SPL and

arch/microblaze/cpu/start.S

@@ -19,7 +19,7 @@ _start:
 	mts	rslr, r8
 
 #if defined(CONFIG_SPL_BUILD)
-	addi	r1, r0, CONFIG_SPL_STACK_ADDR
+	addi	r1, r0, CONFIG_SPL_STACK
 #else
 	addi	r1, r0, CONFIG_SYS_INIT_SP_OFFSET
 #endif

common/spl/Kconfig

@@ -357,6 +357,24 @@ config TPL_SYS_MALLOC_SIMPLE
 	  this will make the TPL binary smaller at the cost of more heap
 	  usage as the *_simple malloc functions do not re-use free-ed mem.
 
+config SPL_SHARES_INIT_SP_ADDR
+	bool "SPL and U-Boot use the same initial stack pointer location"
+	depends on (ARM || ARCH_JZ47XX || MICROBLAZE || RISCV) && SPL_FRAMEWORK
+	default n if ARCH_SUNXI
+	default y
+	help
+	  In many cases, we can use the same initial stack pointer address for
+	  both SPL and U-Boot itself.  If you need to specify a different address
+	  however, say N here and then set a different value in CONFIG_SPL_STACK.
+
+config SPL_STACK
+	hex "Initial stack pointer location"
+	depends on (ARM || ARCH_JZ47XX || MICROBLAZE || RISCV) && SPL_FRAMEWORK
+	depends on !SPL_SHARES_INIT_SP_ADDR
+	help
+	  Address of the start of the stack SPL will use before SDRAM is
+	  initialized.
+
 config SPL_STACK_R
 	bool "Enable SDRAM location for SPL stack"
 	help

configs/A10-OLinuXino-Lime_defconfig

@@ -11,6 +11,7 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/A10s-OLinuXino-M_defconfig

@@ -9,6 +9,7 @@ CONFIG_MMC1_CD_PIN="PG13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=1
 CONFIG_USB1_VBUS_PIN="PB10"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/A13-OLinuXinoM_defconfig

@@ -13,6 +13,7 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 CONFIG_VIDEO_LCD_POWER="PB10"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/A13-OLinuXino_defconfig

@@ -15,6 +15,7 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_CMD_DFU=y

configs/A20-OLinuXino-Lime2-eMMC_defconfig

@@ -13,6 +13,7 @@ CONFIG_SATAPWR="PC3"
 CONFIG_SPL_SPI_SUNXI=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_CMD_DFU=y

configs/A20-OLinuXino-Lime2_defconfig

@@ -11,6 +11,7 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_CMD_DFU=y

configs/A20-OLinuXino-Lime_defconfig

@@ -9,6 +9,7 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/A20-OLinuXino_MICRO-eMMC_defconfig

@@ -11,6 +11,7 @@ CONFIG_VIDEO_VGA=y
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/A20-OLinuXino_MICRO_defconfig

@@ -12,6 +12,7 @@ CONFIG_VIDEO_VGA=y
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/A20-Olimex-SOM-EVB_defconfig

@@ -12,6 +12,7 @@ CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/A20-Olimex-SOM204-EVB-eMMC_defconfig

@@ -13,6 +13,7 @@ CONFIG_SATAPWR="PC3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/A20-Olimex-SOM204-EVB_defconfig

@@ -12,6 +12,7 @@ CONFIG_SATAPWR="PC3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/A33-OLinuXino_defconfig

@@ -16,6 +16,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_BL_EN="PB2"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_AXP_DCDC1_VOLT=3300
 CONFIG_USB_MUSB_HOST=y

configs/Ainol_AW1_defconfig

@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/Ampe_A76_defconfig

@@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/Auxtek-T003_defconfig

@@ -8,6 +8,7 @@ CONFIG_DRAM_EMR1=0
 CONFIG_USB1_VBUS_PIN="PB10"
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/Auxtek-T004_defconfig

@@ -6,6 +6,7 @@ CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN="PG13"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/Bananapi_M2_Ultra_defconfig

@@ -12,6 +12,7 @@ CONFIG_USB2_VBUS_PIN="PH23"
 # CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/Bananapi_defconfig

@@ -9,6 +9,7 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_NETCONSOLE=y

configs/Bananapi_m2m_defconfig

@@ -10,6 +10,7 @@ CONFIG_MMC0_CD_PIN="PB4"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_USB0_ID_DET="PH8"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_USB_EHCI_HCD=y

configs/Bananapro_defconfig

@@ -11,6 +11,7 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_NETCONSOLE=y

configs/CHIP_defconfig

@@ -7,6 +7,7 @@ CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
 CONFIG_USB0_VBUS_PIN="PB10"
 CONFIG_VIDEO_COMPOSITE=y
 CONFIG_CHIP_DIP_SCAN=y
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_CMD_DFU=y

configs/CHIP_pro_defconfig

@@ -5,6 +5,7 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
 CONFIG_USB0_VBUS_PIN="PB10"
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 # CONFIG_CMD_FLASH is not set

configs/CSQ_CS908_defconfig

@@ -7,6 +7,7 @@ CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y

configs/Chuwi_V7_CW0825_defconfig

@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/Colombus_defconfig

@@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_BL_EN="PM1"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y

configs/Cubieboard2_defconfig

@@ -8,6 +8,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/Cubieboard4_defconfig

@@ -12,6 +12,7 @@ CONFIG_USB0_ID_DET="PH16"
 CONFIG_USB1_VBUS_PIN="PH14"
 CONFIG_USB3_VBUS_PIN="PH15"
 CONFIG_AXP_GPIO=y
+CONFIG_SPL_STACK=0x18000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_SUN8I_RSB=y
 CONFIG_AXP809_POWER=y

configs/Cubieboard_defconfig

@@ -8,6 +8,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/Cubietruck_defconfig

@@ -13,6 +13,7 @@ CONFIG_SATAPWR="PH12"
 CONFIG_GMAC_TX_DELAY=1
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_CMD_DFU=y

configs/Cubietruck_plus_defconfig

@@ -16,6 +16,7 @@ CONFIG_I2C0_ENABLE=y
 CONFIG_AXP_GPIO=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_CONSOLE_MUX=y
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y

configs/Empire_electronix_d709_defconfig

@@ -16,6 +16,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/Empire_electronix_m712_defconfig

@@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/Hummingbird_A31_defconfig

@@ -9,6 +9,7 @@ CONFIG_USB2_VBUS_PIN=""
 CONFIG_VIDEO_VGA_VIA_LCD=y
 CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y

configs/Hyundai_A7HD_defconfig

@@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/Itead_Ibox_A20_defconfig

@@ -8,6 +8,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/Lamobo_R1_defconfig

@@ -10,6 +10,7 @@ CONFIG_SATAPWR="PB3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/LicheePi_Zero_defconfig

@@ -5,5 +5,6 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN8I_V3S=y
 CONFIG_DRAM_CLK=360
 # CONFIG_HAS_ARMV7_SECURE_BASE is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 # CONFIG_NETDEVICES is not set

configs/Linksprite_pcDuino3_Nano_defconfig

@@ -10,6 +10,7 @@ CONFIG_SATAPWR="PH2"
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/Linksprite_pcDuino3_defconfig

@@ -8,6 +8,7 @@ CONFIG_DRAM_ZQ=122
 CONFIG_SATAPWR="PH2"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/Linksprite_pcDuino_defconfig

@@ -6,6 +6,7 @@ CONFIG_MACH_SUN4I=y
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/MK808C_defconfig

@@ -5,6 +5,7 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/MSI_Primo73_defconfig

@@ -10,6 +10,7 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/MSI_Primo81_defconfig

@@ -13,6 +13,7 @@ CONFIG_VIDEO_LCD_BL_EN="PA25"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_AXP_DLDO1_VOLT=3300
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set

configs/Marsboard_A10_defconfig

@@ -5,6 +5,7 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_I2C_MVTWSI=y

configs/Mele_A1000G_quad_defconfig

@@ -8,6 +8,7 @@ CONFIG_INITIAL_USB_SCAN_DELAY=2000
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y

configs/Mele_A1000_defconfig

@@ -8,6 +8,7 @@ CONFIG_VIDEO_VGA=y
 CONFIG_VIDEO_COMPOSITE=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/Mele_I7_defconfig

@@ -7,6 +7,7 @@ CONFIG_DRAM_ZQ=120
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y

configs/Mele_M3_defconfig

@@ -9,6 +9,7 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_VIDEO_VGA=y
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/Mele_M5_defconfig

@@ -9,6 +9,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_VIDEO_COMPOSITE=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/Mele_M9_defconfig

@@ -7,6 +7,7 @@ CONFIG_DRAM_ZQ=120
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y

configs/Merrii_A80_Optimus_defconfig

@@ -12,6 +12,7 @@ CONFIG_USB0_ID_DET="PH3"
 CONFIG_USB1_VBUS_PIN="PH4"
 CONFIG_USB3_VBUS_PIN="PH5"
 CONFIG_AXP_GPIO=y
+CONFIG_SPL_STACK=0x18000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_SUN8I_RSB=y
 CONFIG_AXP809_POWER=y

configs/Mini-X_defconfig

@@ -6,6 +6,7 @@ CONFIG_MACH_SUN4I=y
 CONFIG_USB0_VBUS_PIN="PB9"
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/Nintendo_NES_Classic_Edition_defconfig

@@ -9,6 +9,7 @@ CONFIG_DRAM_ODT_EN=y
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
 CONFIG_AXP_GPIO=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MTDPARTS=y

configs/Orangepi_defconfig

@@ -12,6 +12,7 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/Orangepi_mini_defconfig

@@ -14,6 +14,7 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/Sinlinx_SinA31s_defconfig

@@ -10,6 +10,7 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=3
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y

configs/Sinlinx_SinA33_defconfig

@@ -13,6 +13,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_CMD_DFU=y
 CONFIG_DFU_RAM=y

configs/Sinovoip_BPI_M2_defconfig

@@ -7,6 +7,7 @@ CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y

configs/Sinovoip_BPI_M3_defconfig

@@ -17,6 +17,7 @@ CONFIG_AXP_GPIO=y
 CONFIG_SATAPWR="PD25"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_CONSOLE_MUX=y
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_PHY_REALTEK=y
 CONFIG_SUN8I_EMAC=y

configs/Sunchip_CX-A99_defconfig

@@ -12,4 +12,5 @@ CONFIG_USB0_VBUS_PIN="PH15"
 CONFIG_USB1_VBUS_PIN="PL7"
 CONFIG_USB3_VBUS_PIN="PL8"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x18000
 CONFIG_SYS_PBSIZE=1024

configs/UTOO_P66_defconfig

@@ -20,6 +20,7 @@ CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_TL059WV5C0=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/Wexler_TAB7200_defconfig

@@ -13,6 +13,7 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/Wits_Pro_A20_DKT_defconfig

@@ -12,6 +12,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/Wobo_i5_defconfig

@@ -7,6 +7,7 @@ CONFIG_DRAM_CLK=432
 CONFIG_MMC0_CD_PIN="PB3"
 CONFIG_USB1_VBUS_PIN="PG12"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/Yones_Toptech_BD1078_defconfig

@@ -19,6 +19,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/Yones_Toptech_BS1078_V2_defconfig

@@ -16,6 +16,7 @@ CONFIG_VIDEO_LCD_BL_EN="PA25"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_USB_MUSB_HOST=y

configs/a64-olinuxino-emmc_defconfig

@@ -6,6 +6,7 @@ CONFIG_MACH_SUN50I=y
 CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x54000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_SUN8I_EMAC=y

configs/a64-olinuxino_defconfig

@@ -6,6 +6,7 @@ CONFIG_MACH_SUN50I=y
 CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x54000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y

configs/alt_defconfig

@@ -34,6 +34,8 @@ CONFIG_SPL_MAX_SIZE=0x4000
 CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0xe6340000
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_SPI_LOAD=y

configs/amarula_a64_relic_defconfig

@@ -7,6 +7,7 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_VIDEO_DE2 is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x54000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y

configs/apalis-tk1_defconfig

@@ -23,6 +23,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x800ffffc
 CONFIG_SYS_PROMPT="Apalis TK1 # "
 CONFIG_SYS_MAXARGS=32
 CONFIG_SYS_CBSIZE=1024

configs/apalis_imx6_defconfig

@@ -36,6 +36,8 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_MISC_INIT_R=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x91ffb8
 CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_USB_HOST=y

configs/apalis_t30_defconfig

@@ -19,6 +19,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x800ffffc
 CONFIG_SYS_PROMPT="Apalis T30 # "
 CONFIG_SYS_MAXARGS=32
 CONFIG_SYS_CBSIZE=1024

configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig

@@ -30,6 +30,8 @@ CONFIG_BOOTDELAY=0
 CONFIG_CLOCKS=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0xfffffffc
 CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub"
 CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin"
 CONFIG_SPL_OS_BOOT=y

configs/axm_defconfig

@@ -40,6 +40,8 @@ CONFIG_SPL_PAD_TO=0x20000
 CONFIG_SPL_BSS_MAX_SIZE=0x600
 # CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x304000
 CONFIG_SPL_CRC32=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_NAND_RAW_ONLY=y

configs/ba10_tv_box_defconfig

@@ -9,6 +9,7 @@ CONFIG_USB0_VBUS_PIN="PB9"
 CONFIG_USB2_VBUS_PIN="PH12"
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SYS_I2C_MVTWSI=y

configs/bananapi_m1_plus_defconfig

@@ -9,6 +9,7 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_NETCONSOLE=y

configs/bananapi_m2_berry_defconfig

@@ -9,6 +9,7 @@ CONFIG_USB1_VBUS_PIN="PH23"
 # CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SCSI_AHCI=y

configs/bananapi_m2_plus_h3_defconfig

@@ -7,6 +7,7 @@ CONFIG_DRAM_CLK=672
 CONFIG_MACPWR="PD6"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y

configs/bananapi_m2_plus_h5_defconfig

@@ -7,6 +7,7 @@ CONFIG_DRAM_CLK=672
 CONFIG_MACPWR="PD6"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x54000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y

configs/bananapi_m2_zero_defconfig

@@ -6,4 +6,5 @@ CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=408
 CONFIG_MMC0_CD_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024

configs/bananapi_m64_defconfig

@@ -7,6 +7,7 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
 CONFIG_MMC0_CD_PIN="PH13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x54000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_SUN8I_EMAC=y

configs/beaver_defconfig

@@ -16,6 +16,8 @@ CONFIG_CONSOLE_MUX=y
 CONFIG_SYS_STDIO_DEREGISTER=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x800ffffc
 CONFIG_SYS_PROMPT="Tegra30 (Beaver) # "
 CONFIG_SYS_MAXARGS=64
 CONFIG_SYS_PBSIZE=2084

configs/beelink_gs1_defconfig

@@ -8,6 +8,7 @@ CONFIG_MMC0_CD_PIN="PF6"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_PSCI_RESET is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x118000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_LED=y
 CONFIG_LED_GPIO=y

configs/beelink_x2_defconfig

@@ -6,6 +6,7 @@ CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=567
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x8000
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y

configs/bitmain_antminer_s9_defconfig

@@ -29,6 +29,8 @@ CONFIG_USE_PREBOOT=y
 CONFIG_CLOCKS=y
 CONFIG_SPL_MAX_SIZE=0x30000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0xfffffe00
 CONFIG_SPL_STACK_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="antminer> "

configs/brppt2_defconfig

@@ -32,6 +32,8 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="run b_default"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x91ffb8
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_SPI_FLASH=y

configs/cardhu_defconfig

@@ -15,6 +15,8 @@ CONFIG_CONSOLE_MUX=y
 CONFIG_SYS_STDIO_DEREGISTER=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x800ffffc
 CONFIG_SYS_PROMPT="Tegra30 (Cardhu) # "
 CONFIG_SYS_MAXARGS=64
 CONFIG_SYS_PBSIZE=2084

configs/cei-tk1-som_defconfig

@@ -17,6 +17,8 @@ CONFIG_CONSOLE_MUX=y
 CONFIG_SYS_STDIO_DEREGISTER=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x800ffffc
 CONFIG_SYS_PROMPT="Tegra124 (TK1-SOM) # "
 CONFIG_SYS_MAXARGS=64
 CONFIG_SYS_PBSIZE=2086

configs/cgtqmx8_defconfig

@@ -31,6 +31,8 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_MAX_SIZE=0x1f000
 CONFIG_SPL_BSS_MAX_SIZE=0x1000
 CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x13e000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
 CONFIG_SYS_MMCSD_FS_BOOT_PARTITION=0

configs/chromebit_mickey_defconfig

@@ -28,6 +28,8 @@ CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set

configs/chromebook_bob_defconfig

@@ -33,6 +33,8 @@ CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_BSS_MAX_SIZE=0x10000
 CONFIG_HANDOFF=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0xff8effff
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
 CONFIG_SPL_SPI_LOAD=y

configs/chromebook_jerry_defconfig

@@ -29,6 +29,8 @@ CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set

configs/chromebook_kevin_defconfig

@@ -34,6 +34,8 @@ CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_BSS_MAX_SIZE=0x10000
 CONFIG_HANDOFF=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0xff8effff
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
 CONFIG_SPL_SPI_LOAD=y

configs/chromebook_minnie_defconfig

@@ -29,6 +29,8 @@ CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set

configs/chromebook_speedy_defconfig

@@ -29,6 +29,8 @@ CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set