Merge patch series "board: siemens: clean up subfolders"

Enrico Leto <enrico.leto@siemens.com> says: The common folder was initialially created for the common parts of the products based on draco-am355x board family. We have the product lines 'pxm2', 'rut' and the base line unfortunately named 'draco'! Adding the new capricorn-imx8 board family, the files were enhanced without cleanup. Simplify first EEPROM probe and access that implements both i2c with & without driver model. Use abstraction functions for this. Move all am355x specifics to a new file 'board_am335x'. Clean-up includes, config checks, maintainer.
2025-04-19 11:24:42 +00:00 · 2024-02-05 13:33:01 -05:00 · 2024-02-05 13:33:01 -05:00 · daa3100250
commit daa3100250
parent 090d8463b0 b062eef075
29 changed files with 230 additions and 339 deletions
--- a/board/siemens/capricorn/Makefile
+++ b/board/siemens/capricorn/Makefile
@ -4,6 +4,7 @@
 #

 obj-y += board.o
+obj-y += ../common/eeprom.o

 ifdef CONFIG_SPL_BUILD
 obj-y += spl.o
--- a/board/siemens/capricorn/board.c
+++ b/board/siemens/capricorn/board.c
@ -22,12 +22,12 @@
 #include <asm/gpio.h>
 #include <asm/arch/imx8-pins.h>
 #include <asm/arch/iomux.h>
-#include <firmware/imx/sci/sci.h>
 #include <asm/arch/sys_proto.h>
 #ifndef CONFIG_SPL
 #include <asm/arch-imx8/clock.h>
 #endif
 #include <linux/delay.h>
+#include "../common/eeprom.h"
 #include "../common/factoryset.h"

 #define GPIO_PAD_CTRL \
@ -337,13 +337,11 @@ void board_late_mmc_env_init(void)
 }

 #ifndef CONFIG_SPL_BUILD
-int factoryset_read_eeprom(int i2c_addr);
-
 static int load_parameters_from_factoryset(void)
 {
 	int ret;

-	ret = factoryset_read_eeprom(EEPROM_I2C_ADDR);
+	ret = factoryset_read_eeprom(SIEMENS_EE_I2C_ADDR);
 	if (ret)
 		return ret;

--- a/board/siemens/common/board_am335x.c
+++ b/board/siemens/common/board_am335x.c
@ -9,35 +9,20 @@
 * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
 */

-#include <common.h>
 #include <command.h>
-#include <env.h>
-#include <errno.h>
-#include <init.h>
-#include <malloc.h>
 #include <serial.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/emif.h>
-#include <asm/gpio.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <cpsw.h>
 #include <watchdog.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
 #include <asm/mach-types.h>
-#include "../common/factoryset.h"
+#include "board_am335x.h"
+#include "eeprom.h"
+#include "factoryset.h"

 DECLARE_GLOBAL_DATA_PTR;

+
 #ifdef CONFIG_SPL_BUILD
 void set_uart_mux_conf(void)
 {
@ -48,13 +33,14 @@ void set_mux_conf_regs(void)
 {
 	/* Initalize the board header */
 	enable_i2c0_pin_mux();
-	i2c_set_bus_num(0);

 	/* enable early the console */
 	gd->baudrate = CONFIG_BAUDRATE;
 	serial_init();
 	gd->have_console = 1;
-	if (read_eeprom() < 0)
+
+	siemens_ee_setup();
+	if (draco_read_eeprom() < 0)
 		puts("Could not get board ID.\n");

 	enable_board_pin_mux();
@ -62,15 +48,14 @@ void set_mux_conf_regs(void)

 void sdram_init(void)
 {
-	spl_siemens_board_init();
-	board_init_ddr();
+	spl_draco_board_init();
+	draco_init_ddr();

 	return;
 }
 #endif /* #ifdef CONFIG_SPL_BUILD */

 #ifndef CONFIG_SPL_BUILD
-#define FACTORYSET_EEPROM_ADDR		0x50
 /*
 * Basic board specific setup.  Pinmux has been handled already.
 */
@ -79,8 +64,7 @@ int board_init(void)
 #if defined(CONFIG_HW_WATCHDOG)
 	hw_watchdog_init();
 #endif /* defined(CONFIG_HW_WATCHDOG) */
-	i2c_set_bus_num(0);
-	if (read_eeprom() < 0)
+	if (siemens_ee_setup() < 0)
 		puts("Could not get board ID.\n");
 #ifdef CONFIG_MACH_TYPE
 	gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
@ -88,15 +72,11 @@ int board_init(void)
 	gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;

 #ifdef CONFIG_FACTORYSET
-	factoryset_read_eeprom(FACTORYSET_EEPROM_ADDR);
+	factoryset_read_eeprom(SIEMENS_EE_I2C_ADDR);
 #endif

 	gpmc_init();

-#if CONFIG_IS_ENABLED(NAND_CS_INIT)
-	board_nand_cs_init();
-#endif
-
 	return 0;
 }
 #endif /* #ifndef CONFIG_SPL_BUILD */
--- a/board/siemens/common/board_am335x.h
+++ b/board/siemens/common/board_am335x.h
@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Board definitions for draco products
+ *
+ * (C) Copyright 2013 Siemens Schweiz AG
+ * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * TI AM335x boards information header
+ * u-boot:/board/ti/am335x/board.h
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef _BOARD_AM335X_H_
+#define _BOARD_AM335X_H_
+
+#include "eeprom.h"
+
+/* Common functions with product specific implementation */
+void spl_draco_board_init(void);
+void draco_init_ddr(void);
+int draco_read_eeprom(void);
+
+#ifdef CONFIG_SPL_BUILD
+/* Mux for init: uart?, i2c0 to read the main EEPROM */
+void enable_uart0_pin_mux(void);
+void enable_uart1_pin_mux(void);
+void enable_uart2_pin_mux(void);
+void enable_uart3_pin_mux(void);
+void enable_uart4_pin_mux(void);
+void enable_uart5_pin_mux(void);
+void enable_i2c0_pin_mux(void);
+
+/* Main mux function to enable other pinmux required on the board */
+void enable_board_pin_mux(void);
+#endif /* CONFIG_SPL_BUILD */
+
+#endif /* _BOARD_AM335X_H_ */
--- a/board/siemens/common/eeprom.c
+++ b/board/siemens/common/eeprom.c
@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *
+ * Read EEPROM data
+ * (C) Copyright 2024 Siemens AG
+ */
+
+#include <dm/uclass.h>
+#include <i2c.h>
+#include "eeprom.h"
+
+#if CONFIG_IS_ENABLED(DM_I2C)
+static struct udevice *i2c_dev;
+#endif
+
+/* Probe I2C and set-up EEPROM */
+int siemens_ee_setup(void)
+{
+#if CONFIG_IS_ENABLED(DM_I2C)
+	struct udevice *bus;
+	int ret;
+
+	ret = uclass_get_device_by_seq(UCLASS_I2C, SIEMENS_EE_I2C_BUS, &bus);
+	if (ret)
+		goto err;
+
+	ret = dm_i2c_probe(bus, SIEMENS_EE_I2C_ADDR, 0, &i2c_dev);
+	if (ret)
+		goto err;
+	if (i2c_set_chip_offset_len(i2c_dev, 2))
+		goto err;
+#else
+	i2c_set_bus_num(SIEMENS_EE_I2C_BUS);
+	if (i2c_probe(SIEMENS_EE_I2C_ADDR))
+		goto err;
+#endif
+	return 0;
+
+err:
+	printf("Could not probe the EEPROM; something fundamentally wrong on the I2C bus.\n");
+	return 1;
+}
+
+/* Read data from EEPROM */
+int siemens_ee_read_data(uint address, uchar *buffer, int len)
+{
+#if CONFIG_IS_ENABLED(DM_I2C)
+	return dm_i2c_read(i2c_dev, address, buffer, len);
+#else
+	return i2c_read(SIEMENS_EE_I2C_ADDR, address, 2, buffer, len);
+#endif
+}
--- a/board/siemens/common/eeprom.h
+++ b/board/siemens/common/eeprom.h
@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright Siemens AG 2023
+ *
+ * Common board definitions for siemens boards
+ */
+
+#ifndef _COMMON_EEPROM_H_
+#define _COMMON_EEPROM_H_
+
+/* EEPROM @ I2C */
+#define SIEMENS_EE_I2C_BUS	0
+#define SIEMENS_EE_I2C_ADDR	0x50
+
+/* EEPROM mapping */
+#define SIEMENS_EE_ADDR_NAND_GEO	0x80
+#define SIEMENS_EE_ADDR_DDR3		0x90
+#define SIEMENS_EE_ADDR_CHIP		0x120
+#define SIEMENS_EE_ADDR_FACTORYSET	0x400
+
+int siemens_ee_setup(void);
+int siemens_ee_read_data(uint address, uchar *buffer, int len);
+
+#endif /* _COMMON_EEPROM_H_ */
--- a/board/siemens/common/factoryset.c
+++ b/board/siemens/common/factoryset.c
@ -7,26 +7,18 @@

 #if !defined(CONFIG_SPL_BUILD)

-#include <common.h>
 #include <env.h>
-#include <dm.h>
-#include <env_internal.h>
-#include <i2c.h>
-#include <log.h>
+#include <g_dnl.h>
+#include <net.h>
 #include <asm/io.h>
-#if !CONFIG_IS_ENABLED(TARGET_GIEDI) && !CONFIG_IS_ENABLED(TARGET_DENEB)
+#if CONFIG_IS_ENABLED(AM33XX)
 #include <asm/arch/cpu.h>
 #endif
-#include <asm/arch/sys_proto.h>
-#include <asm/unaligned.h>
-#include <net.h>
-#include <errno.h>
-#include <g_dnl.h>
+#include "eeprom.h"
 #include "factoryset.h"

 #define EEPR_PG_SZ	0x80
-#define EEPROM_FATORYSET_OFFSET	0x400
-#define OFF_PG            EEPROM_FATORYSET_OFFSET/EEPR_PG_SZ
+#define OFF_PG		(SIEMENS_EE_ADDR_FACTORYSET / EEPR_PG_SZ)

 /* Global variable that contains necessary information from FactorySet */
 struct factorysetcontainer factory_dat;
@ -148,40 +140,15 @@ int factoryset_read_eeprom(int i2c_addr)
 	int i, pages = 0, size = 0;
 	unsigned char eeprom_buf[0x3c00], hdr[4], buf[MAX_STRING_LENGTH];
 	unsigned char *cp, *cp1;
-#if CONFIG_IS_ENABLED(DM_I2C)
-	struct udevice *bus, *dev;
-	int ret;
-#endif

 #if defined(CONFIG_DFU_OVER_USB)
 	factory_dat.usb_vendor_id = CONFIG_USB_GADGET_VENDOR_NUM;
 	factory_dat.usb_product_id = CONFIG_USB_GADGET_PRODUCT_NUM;
 #endif

-#if CONFIG_IS_ENABLED(DM_I2C)
-	ret = uclass_get_device_by_seq(UCLASS_I2C, EEPROM_I2C_BUS, &bus);
-	if (ret)
+	if (siemens_ee_read_data(SIEMENS_EE_ADDR_FACTORYSET, hdr, sizeof(hdr)))
 		goto err;

-	ret = dm_i2c_probe(bus, i2c_addr, 0, &dev);
-	if (ret)
-		goto err;
-
-	ret = i2c_set_chip_offset_len(dev, 2);
-	if (ret)
-		goto err;
-
-	ret = dm_i2c_read(dev, EEPROM_FATORYSET_OFFSET, hdr, sizeof(hdr));
-	if (ret)
-		goto err;
-#else
-	if (i2c_probe(i2c_addr))
-		goto err;
-
-	if (i2c_read(i2c_addr, EEPROM_FATORYSET_OFFSET, 2, hdr, sizeof(hdr)))
-		goto err;
-#endif
-
 	if ((hdr[0] != 0x99) || (hdr[1] != 0x80)) {
 		printf("FactorySet is not right in eeprom.\n");
 		return 1;
@ -201,33 +168,16 @@ int factoryset_read_eeprom(int i2c_addr)
 	 * data after every time we got a record from eeprom
 	 */
 	debug("Read eeprom page :\n");
-	for (i = 0; i < pages; i++) {
-#if CONFIG_IS_ENABLED(DM_I2C)
-		ret = dm_i2c_read(dev, (OFF_PG + i) * EEPR_PG_SZ,
-				  eeprom_buf + (i * EEPR_PG_SZ), EEPR_PG_SZ);
-		if (ret)
-			goto err;
-#else
-		if (i2c_read(i2c_addr, (OFF_PG + i) * EEPR_PG_SZ, 2,
+	for (i = 0; i < pages; i++)
+		if (siemens_ee_read_data((OFF_PG + i) * EEPR_PG_SZ,
 					 eeprom_buf + (i * EEPR_PG_SZ), EEPR_PG_SZ))
 			goto err;
-#endif
-	}

-	if (size % EEPR_PG_SZ) {
-#if CONFIG_IS_ENABLED(DM_I2C)
-		ret = dm_i2c_read(dev, (OFF_PG + pages) * EEPR_PG_SZ,
+	if (size % EEPR_PG_SZ)
+		if (siemens_ee_read_data((OFF_PG + pages) * EEPR_PG_SZ,
 					 eeprom_buf + (pages * EEPR_PG_SZ),
-				  size % EEPR_PG_SZ);
-		if (ret)
+					 size % EEPR_PG_SZ))
 			goto err;
-#else
-		if (i2c_read(i2c_addr, (OFF_PG + pages) * EEPR_PG_SZ, 2,
-			     eeprom_buf + (pages * EEPR_PG_SZ),
-			     (size % EEPR_PG_SZ)))
-			goto err;
-#endif
-	}

 	/* we do below just for eeprom align */
 	for (i = 0; i < size; i++)
@ -247,11 +197,10 @@ int factoryset_read_eeprom(int i2c_addr)
 		cp1 += 3;
 	}

-#if CONFIG_IS_ENABLED(TARGET_GIEDI) || CONFIG_IS_ENABLED(TARGET_DENEB)
+#if CONFIG_IS_ENABLED(IMX8)
 	/* get mac address for WLAN */
-	ret = get_factory_record_val(cp, size, (uchar *)"WLAN1", (uchar *)"mac",
-				     buf, MAX_STRING_LENGTH);
-	if (ret > 0) {
+	if (get_factory_record_val(cp, size, (uchar *)"WLAN1", (uchar *)"mac",
+				   buf, MAX_STRING_LENGTH) > 0) {
 		cp1 = buf;
 		for (i = 0; i < 6; i++) {
 			factory_dat.mac_wlan[i] = hextoul((char *)cp1, NULL);
@ -355,7 +304,7 @@ static int factoryset_mac_env_set(void)

 	eth_env_set_enetaddr("ethaddr", mac_addr);

-#if CONFIG_IS_ENABLED(TARGET_GIEDI) || CONFIG_IS_ENABLED(TARGET_DENEB)
+#if CONFIG_IS_ENABLED(IMX8)
 	eth_env_set_enetaddr("eth1addr", mac_addr);

 	/* wlan mac */
--- a/board/siemens/common/factoryset.h
+++ b/board/siemens/common/factoryset.h
@ -11,7 +11,7 @@

 struct factorysetcontainer {
 	uchar mac[6];
-#if CONFIG_IS_ENABLED(TARGET_GIEDI) || CONFIG_IS_ENABLED(TARGET_DENEB)
+#if CONFIG_IS_ENABLED(IMX8)
 	uchar mac_wlan[6];
 #endif
 	int usb_vendor_id;
--- a/board/siemens/draco/Kconfig
+++ b/board/siemens/draco/Kconfig
@ -44,6 +44,4 @@ config SYS_SOC
 config SYS_CONFIG_NAME
        default "draco-etamin"

-config NAND_CS_INIT
-	def_bool y
 endif
--- a/board/siemens/draco/Makefile
+++ b/board/siemens/draco/Makefile
@ -14,6 +14,8 @@ obj-y	:= mux.o
 endif

 obj-y	+= board.o
+obj-y += ../common/board_am335x.o
+obj-y += ../common/eeprom.o
 ifndef CONFIG_SPL_BUILD
 obj-y += ../common/factoryset.o
 endif
--- a/board/siemens/draco/board.c
+++ b/board/siemens/draco/board.c
@ -12,33 +12,21 @@
 * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
 */

-#include <common.h>
 #include <command.h>
-#include <env.h>
-#include <errno.h>
-#include <init.h>
-#include <net.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/mem.h>
-#include <asm/io.h>
-#include <asm/emif.h>
-#include <asm/gpio.h>
-#include <i2c.h>
-#include <miiphy.h>
 #include <cpsw.h>
-#include <watchdog.h>
+#include <env.h>
+#include <init.h>
 #include <linux/delay.h>
-#include "board.h"
-#include "../common/factoryset.h"
 #include <nand.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include "board.h"
+#include "../common/eeprom.h"
+#include "../common/factoryset.h"

 #ifdef CONFIG_SPL_BUILD
 static struct draco_baseboard_id __section(".data") settings;
@ -132,17 +120,13 @@ struct am335x_nand_geometry {
 	u8 nand_bus;
 };

-#define EEPROM_ADDR		0x50
-#define EEPROM_ADDR_DDR3	0x90
-#define EEPROM_ADDR_CHIP	0x120
-
 static int draco_read_nand_geometry(void)
 {
 	struct am335x_nand_geometry geo;

 	/* Read NAND geometry */
-	if (i2c_read(EEPROM_ADDR, 0x80, 2,
-		     (uchar *)&geo, sizeof(struct am335x_nand_geometry))) {
+	if (siemens_ee_read_data(SIEMENS_EE_ADDR_NAND_GEO, (uchar *)&geo,
+				 sizeof(struct am335x_nand_geometry))) {
 		printf("Could not read the NAND geomtery; something fundamentally wrong on the I2C bus.\n");
 		return -EIO;
 	}
@ -158,27 +142,21 @@ static int draco_read_nand_geometry(void)
 	return 0;
 }

+#ifdef CONFIG_SPL_BUILD
 /*
 * Read header information from EEPROM into global structure.
 */
-static int read_eeprom(void)
+int draco_read_eeprom(void)
 {
-	/* Check if baseboard eeprom is available */
-	if (i2c_probe(EEPROM_ADDR)) {
-		printf("Could not probe the EEPROM; something fundamentally wrong on the I2C bus.\n");
-		return 1;
-	}
-
-#ifdef CONFIG_SPL_BUILD
 	/* Read Siemens eeprom data (DDR3) */
-	if (i2c_read(EEPROM_ADDR, EEPROM_ADDR_DDR3, 2,
-		     (uchar *)&settings.ddr3, sizeof(struct ddr3_data))) {
+	if (siemens_ee_read_data(SIEMENS_EE_ADDR_DDR3, (uchar *)&settings.ddr3,
+				 sizeof(struct ddr3_data))) {
 		printf("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\nUse default DDR3 timings\n");
 		set_default_ddr3_timings();
 	}
 	/* Read Siemens eeprom data (CHIP) */
-	if (i2c_read(EEPROM_ADDR, EEPROM_ADDR_CHIP, 2,
-		     (uchar *)&settings.chip, sizeof(settings.chip)))
+	if (siemens_ee_read_data(SIEMENS_EE_ADDR_CHIP, (uchar *)&settings.chip,
+				 sizeof(settings.chip)))
 		printf("Could not read chip settings\n");

 	if (ddr3_default.magic == settings.ddr3.magic &&
@ -202,12 +180,9 @@ static int read_eeprom(void)
 	print_ddr3_timings();

 	return draco_read_nand_geometry();
-#endif
-	return 0;
 }

-#ifdef CONFIG_SPL_BUILD
-static void board_init_ddr(void)
+void draco_init_ddr(void)
 {
 struct emif_regs draco_ddr3_emif_reg_data = {
 	.zq_config = 0x50074BE4,
@ -254,7 +229,7 @@ struct ctrl_ioregs draco_ddr3_ioregs = {
 		   &draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0);
 }

-static void spl_siemens_board_init(void)
+void spl_draco_board_init(void)
 {
 	return;
 }
@ -369,31 +344,3 @@ U_BOOT_CMD(
 );
 #endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
 #endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
-
-#if CONFIG_IS_ENABLED(NAND_CS_INIT)
-#define ETAMIN_NAND_GPMC_CONFIG1	0x00000800
-#define ETAMIN_NAND_GPMC_CONFIG2	0x001e1e00
-#define ETAMIN_NAND_GPMC_CONFIG3	0x001e1e00
-#define ETAMIN_NAND_GPMC_CONFIG4	0x16051807
-#define ETAMIN_NAND_GPMC_CONFIG5	0x00151e1e
-#define ETAMIN_NAND_GPMC_CONFIG6	0x16000f80
-
-/* GPMC definitions for second nand cs1 */
-static const u32 gpmc_nand_config[] = {
-	ETAMIN_NAND_GPMC_CONFIG1,
-	ETAMIN_NAND_GPMC_CONFIG2,
-	ETAMIN_NAND_GPMC_CONFIG3,
-	ETAMIN_NAND_GPMC_CONFIG4,
-	ETAMIN_NAND_GPMC_CONFIG5,
-	ETAMIN_NAND_GPMC_CONFIG6,
-	/*CONFIG7- computed as params */
-};
-
-static void board_nand_cs_init(void)
-{
-	enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[1],
-			      0x18000000, GPMC_SIZE_16M);
-}
-#endif
-
-#include "../common/board.c"
--- a/board/siemens/draco/board.h
+++ b/board/siemens/draco/board.h
@ -1,19 +1,15 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * board.h
+ * Board definitions for draco products
 *
 * (C) Copyright 2013 Siemens Schweiz AG
 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
- * Based on:
- * TI AM335x boards information header
- * u-boot:/board/ti/am335x/board.h
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
+ * TI am335x specifics moved to ../common/board_am335x.h
 */

-#ifndef _BOARD_H_
-#define _BOARD_H_
+#ifndef _BOARD_DRACO_H_
+#define _BOARD_DRACO_H_

 #define PARGS(x)	#x , /* Parameter Name */ \
 			settings.ddr3.x, /* EEPROM Value */ \
@ -58,21 +54,4 @@ struct draco_baseboard_id {
 	struct chip_data chip;
 };

-/*
- * We have three pin mux functions that must exist.  We must be able to enable
- * uart0, for initial output and i2c0 to read the main EEPROM.  We then have a
- * main pinmux function that can be overridden to enable all other pinmux that
- * is required on the board.
- */
-void enable_uart0_pin_mux(void);
-void enable_uart1_pin_mux(void);
-void enable_uart2_pin_mux(void);
-void enable_uart3_pin_mux(void);
-void enable_uart4_pin_mux(void);
-void enable_uart5_pin_mux(void);
-void enable_i2c0_pin_mux(void);
-void enable_board_pin_mux(void);
-
-/* Forwared declaration, defined in common board.c */
-void set_env_gpios(unsigned char state);
-#endif
+#endif /* _BOARD_DRACO_H_ */
--- a/board/siemens/draco/mux.c
+++ b/board/siemens/draco/mux.c
@ -10,13 +10,11 @@
 * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
 */

-#include <common.h>
+#include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/mux.h>
-#include <asm/io.h>
-#include <i2c.h>
-#include "board.h"
+#include "eeprom.h"

 static struct module_pin_mux uart0_pin_mux[] = {
 	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART0_RXD */
--- a/board/siemens/pxm2/MAINTAINERS
+++ b/board/siemens/pxm2/MAINTAINERS
@ -1,5 +1,5 @@
 PXM2 BOARD
-M:	Samuel Egli <samuel.egli@siemens.com>
+M:	Enrico Leto <enrico.leto@siemens.com>
 S:	Maintained
 F:	board/siemens/pxm2/
 F:	include/configs/pxm2.h
--- a/board/siemens/pxm2/Makefile
+++ b/board/siemens/pxm2/Makefile
@ -14,6 +14,8 @@ obj-y	:= mux.o
 endif

 obj-y	+= board.o
+obj-y += ../common/board_am335x.o
+obj-y += ../common/eeprom.o
 ifndef CONFIG_SPL_BUILD
 obj-y += ../common/factoryset.o
 endif
--- a/board/siemens/pxm2/board.c
+++ b/board/siemens/pxm2/board.c
@ -12,37 +12,24 @@
 * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
 */

-#include <common.h>
-#include <env.h>
-#include <errno.h>
-#include <init.h>
-#include <log.h>
-#include <malloc.h>
-#include <net.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-#include <asm/emif.h>
-#include <asm/gpio.h>
-#include <i2c.h>
-#include <miiphy.h>
 #include <cpsw.h>
-#include <watchdog.h>
-#include "board.h"
-#include "../common/factoryset.h"
-#include "pmic.h"
+#include <env.h>
+#include <i2c.h>
+#include <init.h>
 #include <nand.h>
-#include <bmp_layout.h>
+#include <net.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include "pmic.h"
+#include "../common/board_am335x.h"
+#include "../common/eeprom.h"
+#include "../common/factoryset.h"

 #ifdef CONFIG_SPL_BUILD
-static void board_init_ddr(void)
+void draco_init_ddr(void)
 {
 struct emif_regs pxm2_ddr3_emif_reg_data = {
 	.sdram_config = 0x41805332,
@ -134,7 +121,7 @@ int voltage_update(unsigned int module, unsigned char vddx_op_vol_sel)
 const struct dpll_params dpll_mpu_pxm2 = {
 		720, OSC-1, 1, -1, -1, -1, -1};

-void spl_siemens_board_init(void)
+void spl_draco_board_init(void)
 {
 	uchar buf[4];
 	/*
@ -160,14 +147,14 @@ void spl_siemens_board_init(void)
 		printf("voltage update failed\n");
 	}
 }
-#endif /* if def CONFIG_SPL_BUILD */

-int read_eeprom(void)
+int draco_read_eeprom(void)
 {
 	/* nothing ToDo here for this board */

 	return 0;
 }
+#endif /* if def CONFIG_SPL_BUILD */

 #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
 	(defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD))
@ -274,5 +261,3 @@ int board_late_init(void)
 	return 0;
 }
 #endif
-
-#include "../common/board.c"
--- a/board/siemens/pxm2/board.h
+++ b/board/siemens/pxm2/board.h
@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * board.h
- *
- * (C) Copyright 2013 Siemens Schweiz AG
- * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * Based on:
- * TI AM335x boards information header
- * u-boot:/board/ti/am335x/board.h
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
- */
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-void enable_uart0_pin_mux(void);
-void enable_i2c0_pin_mux(void);
-void enable_board_pin_mux(void);
-#endif
--- a/board/siemens/pxm2/mux.c
+++ b/board/siemens/pxm2/mux.c
@ -11,13 +11,11 @@
 * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
 */

-#include <common.h>
+#include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/mux.h>
-#include <asm/io.h>
-#include <i2c.h>
-#include "board.h"
+#include "eeprom.h"

 static struct module_pin_mux uart0_pin_mux[] = {
 	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART0_RXD */
--- a/board/siemens/rut/MAINTAINERS
+++ b/board/siemens/rut/MAINTAINERS
@ -1,5 +1,5 @@
 RUT BOARD
-M:	Samuel Egli <samuel.egli@siemens.com>
+M:	Enrico Leto <enrico.leto@siemens.com>
 S:	Maintained
 F:	board/siemens/rut/
 F:	include/configs/rut.h
--- a/board/siemens/rut/Makefile
+++ b/board/siemens/rut/Makefile
@ -14,6 +14,8 @@ obj-y	:= mux.o
 endif

 obj-y	+= board.o
+obj-y += ../common/board_am335x.o
+obj-y += ../common/eeprom.o
 ifndef CONFIG_SPL_BUILD
 obj-y += ../common/factoryset.o
 endif
--- a/board/siemens/rut/board.c
+++ b/board/siemens/rut/board.c
@ -10,44 +10,30 @@
 * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
 */

-#include <common.h>
-#include <env.h>
-#include <errno.h>
-#include <init.h>
-#include <malloc.h>
-#include <net.h>
-#include <spi.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-#include <asm/emif.h>
-#include <asm/gpio.h>
-#include <i2c.h>
-#include <miiphy.h>
 #include <cpsw.h>
-#include <video.h>
-#include <watchdog.h>
+#include <env.h>
+#include <init.h>
 #include <linux/delay.h>
-#include "board.h"
+#include <nand.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include "../common/board_am335x.h"
+#include "../common/eeprom.h"
 #include "../common/factoryset.h"

+#ifdef CONFIG_SPL_BUILD
 /*
 * Read header information from EEPROM into global structure.
 */
-static int read_eeprom(void)
+int draco_read_eeprom(void)
 {
 	return 0;
 }

-#ifdef CONFIG_SPL_BUILD
-static void board_init_ddr(void)
+void draco_init_ddr(void)
 {
 struct emif_regs rut_ddr3_emif_reg_data = {
 	.sdram_config = 0x61C04AB2,
@ -124,7 +110,7 @@ err:
 #define REQUEST_AND_PULSE_RESET(N) \
 		request_and_pulse_reset(N, #N);

-static void spl_siemens_board_init(void)
+void spl_draco_board_init(void)
 {
 	REQUEST_AND_PULSE_RESET(ETH_PHY_RESET_GPIO);
 	REQUEST_AND_PULSE_RESET(MAXTOUCH_RESET_GPIO);
@ -244,5 +230,3 @@ int board_late_init(void)
 	return 0;
 }
 #endif
-
-#include "../common/board.c"
--- a/board/siemens/rut/board.h
+++ b/board/siemens/rut/board.h
@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * board.h
- *
- * (C) Copyright 2013 Siemens Schweiz AG
- * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * Based on:
- * TI AM335x boards information header
- * u-boot:/board/ti/am335x/board.h
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
- */
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-void enable_uart0_pin_mux(void);
-void enable_i2c0_pin_mux(void);
-void enable_board_pin_mux(void);
-#endif
--- a/board/siemens/rut/mux.c
+++ b/board/siemens/rut/mux.c
@ -11,12 +11,10 @@
 * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
 */

-#include <common.h>
+#include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/mux.h>
-#include <asm/io.h>
-#include <i2c.h>

 static struct module_pin_mux uart0_pin_mux[] = {
 	{OFFSET(uart0_rxd), (MODE(0) | PULLUDDIS | RXACTIVE)},	/* UART0_RXD */
--- a/configs/draco-etamin_defconfig
+++ b/configs/draco-etamin_defconfig
@ -86,8 +86,10 @@ CONFIG_CLK=y
 CONFIG_CLK_TI_CTRL=y
 CONFIG_DFU_NAND=y
 CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
+# CONFIG_SPL_DM_I2C is not set
 CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 # CONFIG_SPL_DM_MMC is not set
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
--- a/configs/draco-rastaban_defconfig
+++ b/configs/draco-rastaban_defconfig
@ -84,8 +84,10 @@ CONFIG_CLK=y
 CONFIG_CLK_TI_CTRL=y
 CONFIG_DFU_NAND=y
 CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
+# CONFIG_SPL_DM_I2C is not set
 CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
--- a/configs/draco-thuban_defconfig
+++ b/configs/draco-thuban_defconfig
@ -84,8 +84,10 @@ CONFIG_CLK=y
 CONFIG_CLK_TI_CTRL=y
 CONFIG_DFU_NAND=y
 CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
+# CONFIG_SPL_DM_I2C is not set
 CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
--- a/include/configs/draco-etamin.h
+++ b/include/configs/draco-etamin.h
@ -69,9 +69,6 @@
 /* Physical Memory Map */
 #define CFG_MAX_RAM_BANK_SIZE       (1024 << 20)    /* 1GB */

-#define EEPROM_ADDR_DDR3 0x90
-#define EEPROM_ADDR_CHIP 0x120
-
 /* nedded by compliance test in read mode */

 #undef COMMON_ENV_DFU_ARGS
--- a/include/configs/draco-rastaban.h
+++ b/include/configs/draco-rastaban.h
@ -34,9 +34,6 @@
 /* Physical Memory Map */
 #define CFG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */

-#define EEPROM_ADDR_DDR3 0x90
-#define EEPROM_ADDR_CHIP 0x120
-
 /* Default env settings */
 #define CFG_EXTRA_ENV_SETTINGS \
 	"hostname=rastaban\0" \
--- a/include/configs/draco-thuban.h
+++ b/include/configs/draco-thuban.h
@ -27,9 +27,6 @@
 /* Physical Memory Map */
 #define CFG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */

-#define EEPROM_ADDR_DDR3 0x90
-#define EEPROM_ADDR_CHIP 0x120
-
 /* Default env settings */
 #define CFG_EXTRA_ENV_SETTINGS \
 	"hostname=thuban\0" \