arm: dts: rzg2l: Sync with Linux v6.7

Pull in the recent changes to the RZ/G2L device tree and related dtsi
files so that we're aligned with Linux v6.7 (commit 0dd3ee311255).

Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

arch/arm/dts/r9a07g044.dtsi

@@ -223,20 +223,20 @@
 				     <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0",
-					  "tgiv0", "tgie0", "tgif0",
+					  "tciv0", "tgie0", "tgif0",
-					  "tgia1", "tgib1", "tgiv1", "tgiu1",
+					  "tgia1", "tgib1", "tciv1", "tciu1",
-					  "tgia2", "tgib2", "tgiv2", "tgiu2",
+					  "tgia2", "tgib2", "tciv2", "tciu2",
 					  "tgia3", "tgib3", "tgic3", "tgid3",
-					  "tgiv3",
+					  "tciv3",
 					  "tgia4", "tgib4", "tgic4", "tgid4",
-					  "tgiv4",
+					  "tciv4",
 					  "tgiu5", "tgiv5", "tgiw5",
 					  "tgia6", "tgib6", "tgic6", "tgid6",
-					  "tgiv6",
+					  "tciv6",
 					  "tgia7", "tgib7", "tgic7", "tgid7",
-					  "tgiv7",
+					  "tciv7",
 					  "tgia8", "tgib8", "tgic8", "tgid8",
-					  "tgiv8", "tgiu8";
+					  "tciv8", "tciu8";
 			clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
 			power-domains = <&cpg>;
 			resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;

arch/arm/dts/r9a07g044l2-smarc.dts

@@ -6,6 +6,27 @@
  */
 
 /dts-v1/;
+
+/* Enable SCIF2 (SER0) on PMOD1 (CN7) */
+#define PMOD1_SER0	1
+
+/*
+ * To enable MTU3a PWM on PMOD0,
+ * Disable PMOD1_SER0 by setting "#define PMOD1_SER0	0" above and
+ * enable PMOD_MTU3 by setting "#define PMOD_MTU3	1" below.
+ */
+#define PMOD_MTU3	0
+
+#if (PMOD_MTU3 && PMOD1_SER0)
+#error "Cannot set as PMOD_MTU3 and PMOD1_SER0 are mutually exclusive "
+#endif
+
+#define MTU3_COUNTER_Z_PHASE_SIGNAL	0
+
+#if (!PMOD_MTU3 && MTU3_COUNTER_Z_PHASE_SIGNAL)
+#error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0"
+#endif
+
 #include "r9a07g044l2.dtsi"
 #include "rzg2l-smarc-som.dtsi"
 #include "rzg2l-smarc-pinfunction.dtsi"

arch/arm/dts/rz-smarc-common.dtsi

@@ -32,12 +32,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	audio_mclock: audio_mclock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <11289600>;
-	};
-
 	snd_rzg2l: sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,format = "i2s";
@@ -55,7 +49,7 @@
 		};
 
 		codec_dai: simple-audio-card,codec {
-			clocks = <&audio_mclock>;
+			clocks = <&versa3 2>;
 			sound-dai = <&wm8978>;
 		};
 	};
@@ -76,13 +70,19 @@
 		gpios-states = <1>;
 		states = <3300000 1>, <1800000 0>;
 	};
+
+	x1: x1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
 };
 
-&audio_clk1{
+&audio_clk1 {
 	clock-frequency = <11289600>;
 };
 
-&audio_clk2{
+&audio_clk2 {
 	clock-frequency = <12288000>;
 };
 

arch/arm/dts/rzg2l-smarc-pinfunction.dtsi

@@ -53,6 +53,26 @@
 			 <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */
 	};
 
+	mtu3_pins: mtu3 {
+		mtu3-ext-clk-input-pin {
+			pinmux = <RZG2L_PORT_PINMUX(48, 0, 4)>, /* MTCLKA */
+				 <RZG2L_PORT_PINMUX(48, 1, 4)>; /* MTCLKB */
+		};
+
+		mtu3-pwm {
+			pinmux = <RZG2L_PORT_PINMUX(44, 0, 4)>, /* MTIOC3A */
+				 <RZG2L_PORT_PINMUX(44, 1, 4)>, /* MTIOC3B */
+				 <RZG2L_PORT_PINMUX(44, 2, 4)>, /* MTIOC3C */
+				 <RZG2L_PORT_PINMUX(44, 3, 4)>; /* MTIOC3D */
+		};
+
+#if MTU3_COUNTER_Z_PHASE_SIGNAL
+		mtu3-zphase-clk {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 3)>; /* MTIOC1A */
+		};
+#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */
+	};
+
 	scif0_pins: scif0 {
 		pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>,	/* TxD */
 			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */

arch/arm/dts/rzg2l-smarc-som.dtsi

@@ -73,6 +73,13 @@
 		gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>;
 		regulator-always-on;
 	};
+
+	/* 32.768kHz crystal */
+	x2: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
 };
 
 &adc {
@@ -100,7 +107,7 @@
 		rxc-skew-psec = <2400>;
 		txc-skew-psec = <2400>;
 		rxdv-skew-psec = <0>;
-		txdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
 		rxd0-skew-psec = <0>;
 		rxd1-skew-psec = <0>;
 		rxd2-skew-psec = <0>;
@@ -128,7 +135,7 @@
 		rxc-skew-psec = <2400>;
 		txc-skew-psec = <2400>;
 		rxdv-skew-psec = <0>;
-		txdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
 		rxd0-skew-psec = <0>;
 		rxd1-skew-psec = <0>;
 		rxd2-skew-psec = <0>;
@@ -148,6 +155,17 @@
 	mali-supply = <&reg_1p1v>;
 };
 
+&i2c3 {
+	raa215300: pmic@12 {
+		compatible = "renesas,raa215300";
+		reg = <0x12>, <0x6f>;
+		reg-names = "main", "rtc";
+
+		clocks = <&x2>;
+		clock-names = "xin";
+	};
+};
+
 &ostm1 {
 	status = "okay";
 };

arch/arm/dts/rzg2l-smarc.dtsi

@@ -8,9 +8,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
 
-/* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) */
-#define PMOD1_SER0	1
-
 / {
 	aliases {
 		serial1 = &scif2;
@@ -113,8 +110,48 @@
 		#sound-dai-cells = <0>;
 		reg = <0x1a>;
 	};
+
+	versa3: clock-generator@68 {
+		compatible = "renesas,5p35023";
+		reg = <0x68>;
+		#clock-cells = <1>;
+		clocks = <&x1>;
+
+		renesas,settings = [
+			80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf
+			00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6
+			80 b0 45 c4 95
+		];
+
+		assigned-clocks = <&versa3 0>, <&versa3 1>,
+				  <&versa3 2>, <&versa3 3>,
+				  <&versa3 4>, <&versa3 5>;
+		assigned-clock-rates = <24000000>, <11289600>,
+				       <11289600>, <12000000>,
+				       <25000000>, <12288000>;
+	};
 };
 
+#if PMOD_MTU3
+&mtu3 {
+	pinctrl-0 = <&mtu3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+#if MTU3_COUNTER_Z_PHASE_SIGNAL
+/* SDHI cd pin is muxed with counter Z phase signal */
+&sdhi1 {
+	status = "disabled";
+};
+#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */
+
+&spi1 {
+	status = "disabled";
+};
+#endif /* PMOD_MTU3 */
+
 /*
  * To enable SCIF2 (SER0) on PMOD1 (CN7)
  * SW1 should be at position 2->3 so that SER0_CTS# line is activated