From c3c20a5e3c04c7c9e0866812f6b615ec15af06d9 Mon Sep 17 00:00:00 2001 From: Garrett Giordano Date: Mon, 18 Nov 2024 15:16:06 -0800 Subject: [PATCH] doc: board: phytec: Add phyCORE-AM62ax Add documentation for PHYTEC phyCORE-AM62ax SoM. Signed-off-by: Garrett Giordano Reviewed-by: Wadim Egorov Reviewed-by: Dhruva Gole --- doc/board/phytec/index.rst | 1 + doc/board/phytec/phycore-am62ax.rst | 183 ++++++++++++++++++++++++++++ doc/board/ti/k3.rst | 1 + 3 files changed, 185 insertions(+) create mode 100644 doc/board/phytec/phycore-am62ax.rst diff --git a/doc/board/phytec/index.rst b/doc/board/phytec/index.rst index 99848a9e958..697aec30512 100644 --- a/doc/board/phytec/index.rst +++ b/doc/board/phytec/index.rst @@ -9,6 +9,7 @@ PHYTEC imx8mm-phygate-tauri-l imx93-phyboard-segin phycore-am62x + phycore-am62ax phycore-am64x phycore-imx8mm phycore-imx8mp diff --git a/doc/board/phytec/phycore-am62ax.rst b/doc/board/phytec/phycore-am62ax.rst new file mode 100644 index 00000000000..0c5b4814fc2 --- /dev/null +++ b/doc/board/phytec/phycore-am62ax.rst @@ -0,0 +1,183 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. sectionauthor:: Garrett Giordano + +phyCORE-AM62Ax +============== + +The `phyCORE-AM62Ax `_ is a +SoM (System on Module) featuring TI's AM62Ax SoC. It can be used in combination +with different carrier boards. This module can come with different sizes and +models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM62Ax family. + +A development Kit, called `phyBOARD-Lyra `_ +is used as a carrier board reference design around the AM62Ax SoM. + +Quickstart +---------- + +* Download sources and TI firmware blobs +* Build Trusted Firmware-A +* Build OP-TEE +* Build U-Boot for the R5 +* Build U-Boot for the A53 +* Create bootable uSD Card +* Boot + +Sources +------- + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_boot_sources + :end-before: .. k3_rst_include_end_boot_sources + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_boot_firmwares + :end-before: .. k3_rst_include_end_tifsstub + +Build procedure +--------------- + +Setup the environment variables: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_common_env_vars_desc + :end-before: .. k3_rst_include_end_common_env_vars_desc + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_board_env_vars_desc + :end-before: .. k3_rst_include_end_board_env_vars_desc + +Set the variables corresponding to this platform: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_common_env_vars_defn + :end-before: .. k3_rst_include_end_common_env_vars_defn +.. code-block:: bash + + $ export UBOOT_CFG_CORTEXR=phycore_am62ax_r5_defconfig + $ export UBOOT_CFG_CORTEXA=phycore_am62ax_a53_defconfig + $ export TFA_BOARD=lite + $ # we dont use any extra TFA parameters + $ unset TFA_EXTRA_ARGS + $ export OPTEE_PLATFORM=k3-am62ax + $ # we dont use any extra OPTEE parameters + $ unset OPTEE_EXTRA_ARGS + +1. Trusted Firmware-A: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_build_steps_tfa + :end-before: .. k3_rst_include_end_build_steps_tfa + +2. OP-TEE: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_build_steps_optee + :end-before: .. k3_rst_include_end_build_steps_optee + +3. U-Boot: + +* 3.1 R5: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_build_steps_spl_r5 + :end-before: .. k3_rst_include_end_build_steps_spl_r5 + +* 3.2 A53: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_build_steps_uboot + :end-before: .. k3_rst_include_end_build_steps_uboot + +uSD Card creation +----------------- + +Use fdisk to partition the uSD card. The layout should look similar to: + +.. code-block:: bash + + $ sudo fdisk -l /dev/mmcblk0 + Disk /dev/mmcblk0: 15 GB, 15913189376 bytes, 31080448 sectors + 242816 cylinders, 4 heads, 32 sectors/track + Units: sectors of 1 * 512 = 512 bytes + + Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type + /dev/mmcblk0p1 * 128,0,1 1023,3,32 16384 278527 262144 128M c Win95 FAT32 (LBA) + /dev/mmcblk0p2 1023,3,32 1023,3,32 278528 1693883 1415356 691M 83 Linux + + +Once partitioned, the boot partition has to be formatted with a FAT filesystem. +Assuming the uSD card is `/dev/mmcblk0`: + +.. code-block:: bash + + $ mkfs.vfat /dev/mmcblk0p1 + +To boot from a micro SD card on a HSFS device simply copy the following +artifacts to the FAT partition: + +* tiboot3.bin from R5 build +* tispl.bin from Cortex-A build +* u-boot.img from Cortex-A build + +Boot +---- + +Put the uSD card in the slot on the board and apply power. Check the serial +console for output. + +UART based boot +--------------- + +To boot the board via UART, set the switches to UART mode and connect to the +micro USB port labeled as "Debug UART". After power-on the build artifacts +needs to be uploaded one by one with a tool like sz. + +Example bash script sequence for running on a Linux host PC feeding all boot +artifacts needed to the device. Assuming the host uses /dev/ttyUSB0 as +the main domain serial port: + +.. prompt:: bash $ + + stty -F /dev/ttyUSB0 115200 + sb --xmodem tiboot3.bin > /dev/ttyUSB0 < /dev/ttyUSB0 + sb --ymodem tispl.bin > /dev/ttyUSB0 < /dev/ttyUSB0 + sb --ymodem u-boot.img > /dev/ttyUSB0 < /dev/ttyUSB0 + +Boot Modes +---------- + +The phyCORE-AM62x development kit supports booting from many different +interfaces. By default, the development kit is set to boot from the micro-SD +card. To change the boot device, DIP switches S5 and S6 can be used. +Boot switches should be changed with power off. + +.. list-table:: Boot Modes + :widths: 16 16 16 + :header-rows: 1 + + * - Switch Label + - SW5: 12345678 + - SW6: 12345678 + + * - uSD + - 11000010 + - 01000000 + + * - eMMC + - 11010010 + - 00000000 + + * - OSPI + - 11010000 + - 10000000 + + * - UART + - 11011100 + - 00000000 + +Further Information +------------------- + +Please see :doc:`../ti/am62ax_sk` chapter for further AM62Ax SoC related documentation +and https://docs.phytec.com/projects/yocto-phycore-am62ax/en/latest/ for vendor documentation. diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst index 5d01f487622..0deb4d768f9 100644 --- a/doc/board/ti/k3.rst +++ b/doc/board/ti/k3.rst @@ -46,6 +46,7 @@ K3 SoC based boards in other sections * :doc:`../beagle/am62x_beagleplay` * :doc:`../beagle/j721e_beagleboneai64` * :doc:`../phytec/phycore-am62x` +* :doc:`../phytec/phycore-am62ax` * :doc:`../toradex/verdin-am62` Boot Flow Overview