timer: npcm: Change counter source

The counter value read from TDR register may not be correct.
Read SECCNT and CNTR25M instead to get the correct timestamp.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

drivers/timer/npcm-timer.c

@@ -3,93 +3,53 @@
  * Copyright (c) 2022 Nuvoton Technology Corp.
  */
 
-#include <clk.h>
 #include <dm.h>
 #include <timer.h>
 #include <asm/io.h>
 
-#define NPCM_TIMER_CLOCK_RATE	1000000UL		/* 1MHz timer */
+#define NPCM_TIMER_CLOCK_RATE	25000000UL	/* 25MHz */
-#define NPCM_TIMER_INPUT_RATE	25000000UL		/* Rate of input clock */
-#define NPCM_TIMER_TDR_MASK	GENMASK(23, 0)
-#define NPCM_TIMER_MAX_VAL	NPCM_TIMER_TDR_MASK	/* max counter value */
 
 /* Register offsets */
-#define TCR0	0x0	/* Timer Control and Status Register */
+#define SECCNT	0x0	/* Seconds Counter Register */
-#define TICR0	0x8	/* Timer Initial Count Register */
+#define CNTR25M	0x4	/* 25MHz Counter Register */
-#define TDR0	0x10	/* Timer Data Register */
 
-/* TCR fields */
-#define TCR_MODE_PERIODIC	BIT(27)
-#define TCR_EN			BIT(30)
-#define TCR_PRESCALE		(NPCM_TIMER_INPUT_RATE / NPCM_TIMER_CLOCK_RATE - 1)
-
-enum input_clock_type {
-	INPUT_CLOCK_FIXED,	/* input clock rate is fixed */
-	INPUT_CLOCK_NON_FIXED
-};
-
-/**
- * struct npcm_timer_priv - private data for npcm timer driver
- * npcm timer is a 24-bits down-counting timer.
- *
- * @last_count: last hw counter value
- * @counter: the value to be returned for get_count ops
- */
 struct npcm_timer_priv {
 	void __iomem *base;
-	u32 last_count;
-	u64 counter;
 };
 
 static u64 npcm_timer_get_count(struct udevice *dev)
 {
 	struct npcm_timer_priv *priv = dev_get_priv(dev);
-	u32 val;
+	u64 reg_sec, reg_25m;
+	u64 counter;
 
-	/* The timer is counting down */
+	reg_sec = readl(priv->base + SECCNT);
-	val = readl(priv->base + TDR0) & NPCM_TIMER_TDR_MASK;
+	reg_25m = readl(priv->base + CNTR25M);
-	if (val <= priv->last_count)
+	/*
-		priv->counter += priv->last_count - val;
+	 * When CNTR25M reaches 25M, it goes to 0 and SECCNT is increased by 1.
-	else
+	 * When CNTR25M is zero, wait for CNTR25M to become non-zero in case
-		priv->counter += priv->last_count + (NPCM_TIMER_MAX_VAL + 1 - val);
+	 * SECCNT is not updated yet.
-	priv->last_count = val;
+	 */
+	if (reg_25m == 0) {
+		while (reg_25m == 0)
+			reg_25m = readl(priv->base + CNTR25M);
+		reg_sec = readl(priv->base + SECCNT);
+	}
+	counter = reg_sec * NPCM_TIMER_CLOCK_RATE + reg_25m;
 
-	return priv->counter;
+	return counter;
 }
 
 static int npcm_timer_probe(struct udevice *dev)
 {
 	struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev);
 	struct npcm_timer_priv *priv = dev_get_priv(dev);
-	enum input_clock_type type = dev_get_driver_data(dev);
-	struct clk clk;
-	int ret;
 
 	priv->base = dev_read_addr_ptr(dev);
 	if (!priv->base)
 		return -EINVAL;
 	uc_priv->clock_rate = NPCM_TIMER_CLOCK_RATE;
 
-	if (type == INPUT_CLOCK_NON_FIXED) {
-		ret = clk_get_by_index(dev, 0, &clk);
-		if (ret < 0)
-			return ret;
-
-		ret = clk_set_rate(&clk, NPCM_TIMER_INPUT_RATE);
-		if (ret < 0)
-			return ret;
-	}
-
-	/*
-	 * Configure timer and start
-	 * periodic mode
-	 * timer clock rate = input clock / prescale
-	 */
-	writel(0, priv->base + TCR0);
-	writel(NPCM_TIMER_MAX_VAL, priv->base + TICR0);
-	writel(TCR_EN | TCR_MODE_PERIODIC | TCR_PRESCALE,
-	       priv->base + TCR0);
-
 	return 0;
 }
 
@@ -98,8 +58,8 @@ static const struct timer_ops npcm_timer_ops = {
 };
 
 static const struct udevice_id npcm_timer_ids[] = {
-	{ .compatible = "nuvoton,npcm845-timer", .data = INPUT_CLOCK_FIXED},
+	{ .compatible = "nuvoton,npcm845-timer"},
-	{ .compatible = "nuvoton,npcm750-timer", .data = INPUT_CLOCK_NON_FIXED},
+	{ .compatible = "nuvoton,npcm750-timer"},
 	{}
 };