diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index 3e292bf70e1..46ace7e5fd6 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -98,7 +98,6 @@ config SYS_FSL_ERRATUM_A008407 config SYS_FSL_QSPI_SKIP_CLKSEL bool "Skip setting QSPI clock during SoC init" - default 0 help To improve startup times when booting from QSPI flash, the QSPI frequency can be set very early in the boot process. If this option diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index a8b493e2f87..d46934c2dcf 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -739,7 +739,7 @@ config HAS_FSL_XHCI_USB config SYS_FSL_BOOTROM_BASE hex depends on FSL_LSCH2 - default 0 + default 0x0 config SYS_FSL_BOOTROM_SIZE hex diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index d94b5828d0d..2136ab7e9eb 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -181,7 +181,7 @@ config IMX8_ROMAPI config SPL_IMX_ROMAPI_LOADADDR hex "Default load address to load image through ROM API" depends on IMX8_ROMAPI || SPL_BOOTROM_SUPPORT - default 0 + default 0x0 config IMX_DCD_ADDR hex "DCD Blocks location on the image" diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index 15f844f5030..59d11b3179e 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -34,11 +34,11 @@ config SYS_SOC config BOOTAUX_RESERVED_MEM_BASE hex "i.MX auxiliary core dram memory base" - default 0 + default 0x0 config BOOTAUX_RESERVED_MEM_SIZE hex "i.MX auxiliary core dram memory size" - default 0 + default 0x0 choice prompt "i.MX8 board select" diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 49da93d54b4..4569a9ce283 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -469,7 +469,7 @@ config ROCKCHIP_STIMER_BASE config ROCKCHIP_SPL_RESERVE_IRAM hex "Size of IRAM reserved in SPL" - default 0 + default 0x0 help SPL may need reserve memory for firmware loaded by SPL, whose load address is in IRAM and may overlay with SPL text area if not diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index e20c3a3ee92..9d5df2c1027 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -568,7 +568,7 @@ config DRAM_EMR1 config DRAM_TPR3 hex "sunxi dram tpr3 value" - default 0 + default 0x0 ---help--- Set the dram controller tpr3 parameter. This parameter configures the delay on the command lane and also phase shifts, which are @@ -579,7 +579,7 @@ config DRAM_TPR3 config DRAM_DQS_GATING_DELAY hex "sunxi dram dqs_gating_delay value" - default 0 + default 0x0 ---help--- Set the dram controller dqs_gating_delay parmeter. Each byte encodes the DQS gating delay for each byte lane. The delay diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig index bd2af8dc10e..1731c965ad9 100644 --- a/arch/powerpc/cpu/mpc8xx/Kconfig +++ b/arch/powerpc/cpu/mpc8xx/Kconfig @@ -94,7 +94,7 @@ config SYS_SIUMCR config SYS_SYPCR hex "SYPCR register" if !WDT_MPC8xxx - default 0 + default 0x0 help System Protection Control (11-9) diff --git a/boot/Kconfig b/boot/Kconfig index e8fb03b8016..b00d7a8d11e 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -1007,7 +1007,7 @@ config BOOTSTAGE_STASH config BOOTSTAGE_STASH_ADDR hex "Address to stash boot timing information" - default 0 + default 0x0 help Provide an address which will not be overwritten by the OS when it starts, so that it can read this information when ready. diff --git a/cmd/Kconfig b/cmd/Kconfig index 7f65e3187a6..8ab47b333c2 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -517,7 +517,7 @@ config CMD_SPL config CMD_SPL_NAND_OFS hex "Offset of OS args or dtb for Falcon-mode NAND boot" depends on CMD_SPL && (TPL_NAND_SUPPORT || SPL_NAND_SUPPORT) - default 0 + default 0x0 help This provides the offset of the command line arguments for Linux when booting from NAND in Falcon mode. See doc/README.falcon @@ -527,7 +527,7 @@ config CMD_SPL_NAND_OFS config CMD_SPL_NOR_OFS hex "Offset of OS args or dtb for Falcon-mode NOR boot" depends on CMD_SPL && SPL_NOR_SUPPORT - default 0 + default 0x0 help This provides the offset of the command line arguments or dtb for Linux when booting from NOR in Falcon mode. @@ -1514,7 +1514,7 @@ config DEFAULT_SPI_BUS config DEFAULT_SPI_MODE hex "default spi mode used by sspi command (see include/spi.h)" depends on CMD_SPI - default 0 + default 0x0 config CMD_TEMPERATURE bool "temperature - display the temperature from thermal sensors" @@ -1805,7 +1805,7 @@ config BOOTP_PXE_CLIENTARCH depends on BOOTP_PXE default 0x16 if ARM64 default 0x15 if ARM - default 0 if X86 + default 0x0 if X86 config BOOTP_VCI_STRING string diff --git a/common/Kconfig b/common/Kconfig index cdb77a6a7da..0b09bd68bd1 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1031,7 +1031,7 @@ config BLOBLIST_SIZE config BLOBLIST_SIZE_RELOC hex "Size of bloblist after relocation" default BLOBLIST_SIZE if BLOBLIST_FIXED || BLOBLIST_ALLOC - default 0 if BLOBLIST_PASSAGE + default 0x0 if BLOBLIST_PASSAGE help Sets the size of the bloblist in bytes after relocation. Since U-Boot has a lot more memory available then, it is possible to use a larger diff --git a/common/spl/Kconfig b/common/spl/Kconfig index c5dd476db58..1c2fe78e3e0 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -67,7 +67,7 @@ config SPL_SIZE_LIMIT_SUBTRACT_MALLOC config SPL_SIZE_LIMIT_PROVIDE_STACK hex "SPL image size check: provide stack space before relocation" depends on SPL_SIZE_LIMIT > 0 - default 0 + default 0x0 help If set, this size is reserved in SPL_SIZE_LIMIT check to ensure such an image does not overflow SRAM if SPL_SIZE_LIMIT describes the size diff --git a/common/spl/Kconfig.tpl b/common/spl/Kconfig.tpl index 3d6cf1e59f3..cc71578f646 100644 --- a/common/spl/Kconfig.tpl +++ b/common/spl/Kconfig.tpl @@ -126,7 +126,7 @@ config TPL_POWER config TPL_TEXT_BASE hex "Base address for the .text section of the TPL stage" - default 0 + default 0x0 help The base address for the .text section of the TPL stage. diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig index a485cc65eaf..7c4085d0849 100644 --- a/configs/am335x_guardian_defconfig +++ b/configs/am335x_guardian_defconfig @@ -17,7 +17,6 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SPL=y -CONFIG_BOOTSTAGE_STASH_ADDR=0x0 CONFIG_ENV_OFFSET_REDUND=0x540000 CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_MEMTEST_START=0x80000000 diff --git a/configs/efi-x86_app32_defconfig b/configs/efi-x86_app32_defconfig index 50975dbfaaf..1bfc01f060d 100644 --- a/configs/efi-x86_app32_defconfig +++ b/configs/efi-x86_app32_defconfig @@ -2,7 +2,7 @@ CONFIG_X86=y CONFIG_NR_DRAM_BANKS=8 CONFIG_ENV_SIZE=0x1000 CONFIG_DEFAULT_DEVICE_TREE="efi-x86_app" -CONFIG_DEBUG_UART_BASE=0 +CONFIG_DEBUG_UART_BASE=0x0 CONFIG_DEBUG_UART_CLOCK=0 CONFIG_VENDOR_EFI=y CONFIG_TARGET_EFI_APP32=y diff --git a/configs/efi-x86_app64_defconfig b/configs/efi-x86_app64_defconfig index 0fc358ddcdf..46a1900c704 100644 --- a/configs/efi-x86_app64_defconfig +++ b/configs/efi-x86_app64_defconfig @@ -2,7 +2,7 @@ CONFIG_X86=y CONFIG_NR_DRAM_BANKS=8 CONFIG_ENV_SIZE=0x1000 CONFIG_DEFAULT_DEVICE_TREE="efi-x86_app" -CONFIG_DEBUG_UART_BASE=0 +CONFIG_DEBUG_UART_BASE=0x0 CONFIG_DEBUG_UART_CLOCK=0 CONFIG_X86_RUN_64BIT=y CONFIG_VENDOR_EFI=y diff --git a/configs/evb-rk3229_defconfig b/configs/evb-rk3229_defconfig index c1e7f390ad5..7469f3fbe0a 100644 --- a/configs/evb-rk3229_defconfig +++ b/configs/evb-rk3229_defconfig @@ -12,7 +12,6 @@ CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rk3229-evb" CONFIG_SPL_TEXT_BASE=0x60000000 CONFIG_ROCKCHIP_RK322X=y -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0 CONFIG_TARGET_EVB_RK3229=y CONFIG_SPL_STACK_R_ADDR=0x60600000 CONFIG_DEBUG_UART_BASE=0x11030000 diff --git a/configs/evb-rk3308_defconfig b/configs/evb-rk3308_defconfig index a13a809c1ef..d1e78582a3a 100644 --- a/configs/evb-rk3308_defconfig +++ b/configs/evb-rk3308_defconfig @@ -11,7 +11,6 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_DEFAULT_DEVICE_TREE="rk3308-evb" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3308=y -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0 CONFIG_SPL_DRIVERS_MISC=y CONFIG_TARGET_EVB_RK3308=y CONFIG_SPL_STACK_R_ADDR=0xc00000 diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index 2814e2c8147..74733c4de32 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -86,7 +86,6 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_FSL_USDHC=y CONFIG_MTD=y CONFIG_DM_MTD=y diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig index f63eb4fd64c..e2bca406113 100644 --- a/configs/imx8mm_data_modul_edm_sbc_defconfig +++ b/configs/imx8mm_data_modul_edm_sbc_defconfig @@ -233,6 +233,5 @@ CONFIG_USB_GADGET_MANUFACTURER="Data Modul" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y -CONFIG_SDP_LOADADDR=0x0 CONFIG_USB_FUNCTION_ACM=y CONFIG_IMX_WATCHDOG=y diff --git a/configs/imx8mn_beacon_2g_defconfig b/configs/imx8mn_beacon_2g_defconfig index fab3ab154b5..975fcc2481a 100644 --- a/configs/imx8mn_beacon_2g_defconfig +++ b/configs/imx8mn_beacon_2g_defconfig @@ -142,4 +142,3 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y -CONFIG_SDP_LOADADDR=0x0 diff --git a/configs/imx8mn_beacon_defconfig b/configs/imx8mn_beacon_defconfig index f810d4be610..f4ecdc88f39 100644 --- a/configs/imx8mn_beacon_defconfig +++ b/configs/imx8mn_beacon_defconfig @@ -149,5 +149,4 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y -CONFIG_SDP_LOADADDR=0x0 CONFIG_IMX_WATCHDOG=y diff --git a/configs/imx8mn_beacon_fspi_defconfig b/configs/imx8mn_beacon_fspi_defconfig index 8705d9bccc4..f5e57fb50bc 100644 --- a/configs/imx8mn_beacon_fspi_defconfig +++ b/configs/imx8mn_beacon_fspi_defconfig @@ -149,7 +149,6 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y -CONFIG_SDP_LOADADDR=0x0 CONFIG_IMX_WATCHDOG=y CONFIG_FSPI_CONF_HEADER=y CONFIG_FSPI_CONF_FILE="fspi_header.bin" diff --git a/configs/imx8mp_beacon_defconfig b/configs/imx8mp_beacon_defconfig index 2570eb6a885..c6a3e35e73a 100644 --- a/configs/imx8mp_beacon_defconfig +++ b/configs/imx8mp_beacon_defconfig @@ -172,7 +172,6 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9 CONFIG_USB_GADGET_PRODUCT_NUM=0x0152 -CONFIG_SDP_LOADADDR=0x0 CONFIG_USB_FUNCTION_ACM=y CONFIG_USB_ETHER=y CONFIG_USB_ETH_CDC=y diff --git a/configs/imx8mp_data_modul_edm_sbc_defconfig b/configs/imx8mp_data_modul_edm_sbc_defconfig index 2ff577f2d8a..d3b629caf5c 100644 --- a/configs/imx8mp_data_modul_edm_sbc_defconfig +++ b/configs/imx8mp_data_modul_edm_sbc_defconfig @@ -257,7 +257,6 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Data Modul" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_SDP_LOADADDR=0x0 CONFIG_USB_FUNCTION_ACM=y CONFIG_USB_ETHER=y CONFIG_USB_ETH_CDC=y diff --git a/configs/imx8mp_dhcom_pdk2_defconfig b/configs/imx8mp_dhcom_pdk2_defconfig index 14ac499e587..24c87aae781 100644 --- a/configs/imx8mp_dhcom_pdk2_defconfig +++ b/configs/imx8mp_dhcom_pdk2_defconfig @@ -255,7 +255,6 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="DH electronics" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_SDP_LOADADDR=0x0 CONFIG_USB_FUNCTION_ACM=y CONFIG_USB_ETHER=y CONFIG_USB_ETH_CDC=y diff --git a/configs/imx8mp_dhcom_pdk3_defconfig b/configs/imx8mp_dhcom_pdk3_defconfig index 3b26f315bba..3e89e0f8293 100644 --- a/configs/imx8mp_dhcom_pdk3_defconfig +++ b/configs/imx8mp_dhcom_pdk3_defconfig @@ -258,7 +258,6 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="DH electronics" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_SDP_LOADADDR=0x0 CONFIG_USB_FUNCTION_ACM=y CONFIG_USB_ETHER=y CONFIG_USB_ETH_CDC=y diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig index 8fe2798c3cc..21a397933e7 100644 --- a/configs/kontron_sl28_defconfig +++ b/configs/kontron_sl28_defconfig @@ -20,7 +20,6 @@ CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_STACK=0x18009ff0 CONFIG_SPL_SIZE_LIMIT=0x20000 -CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0 CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x3f0000 CONFIG_SPL_SPI_FLASH_SUPPORT=y @@ -130,7 +129,6 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_WDT=y CONFIG_WDT_SL28CPLD=y CONFIG_WDT_SP805=y -CONFIG_OF_LIBFDT_ASSUME_MASK=0x0 CONFIG_EFI_SET_TIME=y CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y diff --git a/configs/lion-rk3368_defconfig b/configs/lion-rk3368_defconfig index 7c55b3be0d2..9c29eb6fed3 100644 --- a/configs/lion-rk3368_defconfig +++ b/configs/lion-rk3368_defconfig @@ -10,7 +10,6 @@ CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rk3368-lion-haikou" CONFIG_SPL_TEXT_BASE=0x00000000 CONFIG_ROCKCHIP_RK3368=y -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0 CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_DRIVERS_MISC=y diff --git a/configs/roc-cc-rk3308_defconfig b/configs/roc-cc-rk3308_defconfig index 9a789b212f1..3f3c223fa1d 100644 --- a/configs/roc-cc-rk3308_defconfig +++ b/configs/roc-cc-rk3308_defconfig @@ -11,7 +11,6 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_DEFAULT_DEVICE_TREE="rk3308-roc-cc" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3308=y -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0 CONFIG_SPL_DRIVERS_MISC=y CONFIG_TARGET_ROC_RK3308_CC=y CONFIG_SPL_STACK_R_ADDR=0xc00000 diff --git a/configs/rock-pi-s-rk3308_defconfig b/configs/rock-pi-s-rk3308_defconfig index cc3274a98b3..8c13f7f9c3b 100644 --- a/configs/rock-pi-s-rk3308_defconfig +++ b/configs/rock-pi-s-rk3308_defconfig @@ -11,7 +11,6 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_DEFAULT_DEVICE_TREE="rk3308-rock-pi-s" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3308=y -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0 CONFIG_SPL_DRIVERS_MISC=y CONFIG_TARGET_EVB_RK3308=y CONFIG_SPL_STACK_R_ADDR=0xc00000 diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig index bf3ef0c4007..0e079d7bb4d 100644 --- a/configs/sandbox64_defconfig +++ b/configs/sandbox64_defconfig @@ -4,7 +4,6 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="sandbox64" CONFIG_DM_RESET=y CONFIG_PRE_CON_BUF_ADDR=0x100000 -CONFIG_BOOTSTAGE_STASH_ADDR=0x0 CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_PCI=y CONFIG_SANDBOX64=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index ea2b2566aa1..f031b509105 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -4,7 +4,6 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="sandbox" CONFIG_DM_RESET=y CONFIG_PRE_CON_BUF_ADDR=0xf0000 -CONFIG_BOOTSTAGE_STASH_ADDR=0x0 CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_PCI=y CONFIG_DEBUG_UART=y diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig index 8aa295686dc..c20015db47b 100644 --- a/configs/sandbox_flattree_defconfig +++ b/configs/sandbox_flattree_defconfig @@ -3,7 +3,6 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="sandbox" CONFIG_DM_RESET=y -CONFIG_BOOTSTAGE_STASH_ADDR=0x0 CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_PCI=y CONFIG_DEBUG_UART=y diff --git a/configs/sandbox_noinst_defconfig b/configs/sandbox_noinst_defconfig index 2c6aab6c859..f6e351961e9 100644 --- a/configs/sandbox_noinst_defconfig +++ b/configs/sandbox_noinst_defconfig @@ -10,7 +10,6 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL=y -CONFIG_BOOTSTAGE_STASH_ADDR=0x0 CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_PCI=y CONFIG_SANDBOX_SPL=y diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index 8d50162b274..7e6ee936769 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -10,7 +10,6 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL=y -CONFIG_BOOTSTAGE_STASH_ADDR=0x0 CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_PCI=y CONFIG_SANDBOX_SPL=y diff --git a/configs/sandbox_vpl_defconfig b/configs/sandbox_vpl_defconfig index f3a0fd19a96..9ac800a93c0 100644 --- a/configs/sandbox_vpl_defconfig +++ b/configs/sandbox_vpl_defconfig @@ -15,7 +15,6 @@ CONFIG_TPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL=y -CONFIG_BOOTSTAGE_STASH_ADDR=0x0 CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_PCI=y CONFIG_SANDBOX_SPL=y diff --git a/configs/xilinx_versal_net_virt_defconfig b/configs/xilinx_versal_net_virt_defconfig index 97904bdec0a..54ba0b7c4f2 100644 --- a/configs/xilinx_versal_net_virt_defconfig +++ b/configs/xilinx_versal_net_virt_defconfig @@ -77,7 +77,6 @@ CONFIG_DM_MAILBOX=y CONFIG_ZYNQMP_IPI=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index acab38fefee..26260841c59 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -11,7 +11,6 @@ CONFIG_DM_RESET=y CONFIG_SPL_STACK_R_ADDR=0x18000000 CONFIG_SPL_STACK=0xfffffffc CONFIG_SPL_SIZE_LIMIT=0x2a000 -CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0 CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x1E80000 CONFIG_SPL_SPI_FLASH_SUPPORT=y diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 6baaa6f0711..1abea3f10db 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -167,7 +167,7 @@ config SYS_IDE_MAXDEVICE config SYS_ATA_BASE_ADDR hex "Base address of IDE controller" - default 0 + default 0x0 help This is the address of the IDE controller, from which other addresses are calculated. Each bus is at a fixed offset from this address, diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig index a3df9aa3d0f..837c6f1180d 100644 --- a/drivers/fastboot/Kconfig +++ b/drivers/fastboot/Kconfig @@ -56,7 +56,7 @@ config FASTBOOT_BUF_ADDR ROCKCHIP_RK3399 default 0x280000 if ROCKCHIP_RK3368 default 0x100000 if ARCH_ZYNQMP - default 0 if SANDBOX + default 0x0 if SANDBOX help The fastboot protocol requires a large memory buffer for downloads. Define this to the starting RAM address to use for diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 4c76fd7e415..4f42200f392 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -372,7 +372,7 @@ config SYS_MXC_I2C1_SPEED config SYS_MXC_I2C1_SLAVE hex "I2C1 Slave" - default 0 + default 0x0 help MXC I2C1 Slave endif @@ -387,7 +387,7 @@ config SYS_MXC_I2C2_SPEED config SYS_MXC_I2C2_SLAVE hex "I2C2 Slave" - default 0 + default 0x0 help MXC I2C2 Slave endif @@ -401,7 +401,7 @@ config SYS_MXC_I2C3_SPEED config SYS_MXC_I2C3_SLAVE hex "I2C3 Slave" - default 0 + default 0x0 help MXC I2C3 Slave endif @@ -415,7 +415,7 @@ config SYS_MXC_I2C4_SPEED config SYS_MXC_I2C4_SLAVE hex "I2C4 Slave" - default 0 + default 0x0 help MXC I2C4 Slave endif @@ -429,7 +429,7 @@ config SYS_MXC_I2C5_SPEED config SYS_MXC_I2C5_SLAVE hex "I2C5 Slave" - default 0 + default 0x0 help MXC I2C5 Slave endif @@ -443,7 +443,7 @@ config SYS_MXC_I2C6_SPEED config SYS_MXC_I2C6_SLAVE hex "I2C6 Slave" - default 0 + default 0x0 help MXC I2C6 Slave endif @@ -457,7 +457,7 @@ config SYS_MXC_I2C7_SPEED config SYS_MXC_I2C7_SLAVE hex "I2C7 Slave" - default 0 + default 0x0 help MXC I2C7 Slave endif @@ -471,7 +471,7 @@ config SYS_MXC_I2C8_SPEED config SYS_MXC_I2C8_SLAVE hex "I2C8 Slave" - default 0 + default 0x0 help MXC I2C8 Slave endif diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index b9f5c7a37ae..a6e3f62ecb0 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -555,7 +555,7 @@ config SPL_I2C_EEPROM config SYS_I2C_EEPROM_ADDR hex "Chip address of the EEPROM device" depends on ID_EEPROM || I2C_EEPROM || SPL_I2C_EEPROM || CMD_EEPROM || ENV_IS_IN_EEPROM - default 0 + default 0x0 if I2C_EEPROM diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index a1e089962a9..7ca42df6a7e 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -482,8 +482,8 @@ endchoice config DEBUG_UART_BASE hex "Base address of UART" depends on DEBUG_UART - default 0 if DEBUG_SBI_CONSOLE - default 0 if DEBUG_UART_SANDBOX + default 0x0 if DEBUG_SBI_CONSOLE + default 0x0 if DEBUG_UART_SANDBOX default 0xff000000 if DEBUG_UART_ZYNQ && ARCH_ZYNQMP default 0xe0000000 if DEBUG_UART_ZYNQ && ARCH_ZYNQ help @@ -1139,6 +1139,6 @@ config SYS_SDSR config SYS_SDMR hex "SDMR Value" depends on MPC8XX_CONS - default 0 + default 0x0 endif diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 1cfe6022842..4eccc5e3370 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -160,7 +160,7 @@ config USB_GADGET_VBUS_DRAW config SDP_LOADADDR hex "Default load address at SDP_WRITE and SDP_JUMP" - default 0 + default 0x0 # Selected by UDC drivers that support high-speed operation. config USB_GADGET_DUALSPEED diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index e32ce13fb6b..fe43fbd7004 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -66,7 +66,7 @@ config VIDEO_PCI_DEFAULT_FB_SIZE hex "Default framebuffer size to use if no drivers request it" default 0x1000000 if X86 default 0x800000 if !X86 && VIDEO_BOCHS - default 0 if !X86 && !VIDEO_BOCHS + default 0x0 if !X86 && !VIDEO_BOCHS help Generally, video drivers request the amount of memory they need for the frame buffer when they are bound, by setting the size field in @@ -1039,7 +1039,7 @@ config SPL_VIDEO_PCI_DEFAULT_FB_SIZE hex "Default framebuffer size to use if no drivers request it at SPL" default 0x1000000 if X86 default 0x800000 if !X86 && VIDEO_BOCHS - default 0 if !X86 && !VIDEO_BOCHS + default 0x0 if !X86 && !VIDEO_BOCHS help Generally, video drivers request the amount of memory they need for the frame buffer when they are bound, by setting the size field in diff --git a/env/Kconfig b/env/Kconfig index 13e32104b4c..54203faa89e 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -571,7 +571,7 @@ config ENV_OFFSET default 0xE0000 if ARCH_ZYNQ default 0x1E00000 if ARCH_ZYNQMP default 0x7F40000 if ARCH_VERSAL || ARCH_VERSAL_NET - default 0 if ARC + default 0x0 if ARC default 0x140000 if ARCH_AT91 default 0x260000 if ARCH_OMAP2PLUS default 0x1080000 if MICROBLAZE && ENV_IS_IN_SPI_FLASH @@ -583,7 +583,7 @@ config ENV_OFFSET_REDUND depends on (ENV_IS_IN_EEPROM || ENV_IS_IN_MMC || ENV_IS_IN_NAND || \ ENV_IS_IN_SPI_FLASH) && SYS_REDUNDAND_ENVIRONMENT default 0x10C0000 if MICROBLAZE - default 0 + default 0x0 help Offset from the start of the device (or partition) of the redundant environment location. diff --git a/lib/Kconfig b/lib/Kconfig index 07e61de5b64..42e559ad0b5 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -862,7 +862,7 @@ config OF_LIBFDT config OF_LIBFDT_ASSUME_MASK hex "Mask of conditions to assume for libfdt" depends on OF_LIBFDT || FIT - default 0 + default 0x0 help Use this to change the assumptions made by libfdt about the device tree it is working with. A value of 0 means that no assumptions