diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 2ebe341ed1b..fe6b785d0bd 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -348,6 +348,21 @@ config MVEBU_EFUSE_FAKE
 	  from a memory block.
 	  This is can be used for testing prog scripts.
 
+config MVEBU_EFUSE_VHV_GPIO
+	string "VHV_Enable GPIO name for eFuse programming"
+	depends on MVEBU_EFUSE && !ARMADA_3700
+	help
+	  The eFuse programing (burning) phase requires supplying 1.8V to the
+	  device on the VHV power pin, while for normal operation the VHV power
+	  rail must be left unconnected. See Marvell AN-389: ARMADA VHV Power
+	  document (Doc. No. MV-S302545-00 Rev. C, August 2, 2016) for details.
+	  .
+	  This specify VHV_Enable GPIO name used in U-Boot for enabling VHV power.
+
+config MVEBU_EFUSE_VHV_GPIO_ACTIVE_LOW
+	bool "VHV_Enable GPIO is Active Low"
+	depends on MVEBU_EFUSE_VHV_GPIO != ""
+
 config SECURED_MODE_IMAGE
 	bool "Build image for trusted boot"
 	default false
diff --git a/arch/arm/mach-mvebu/efuse.c b/arch/arm/mach-mvebu/efuse.c
index 4b043378217..be5dc0e07d9 100644
--- a/arch/arm/mach-mvebu/efuse.c
+++ b/arch/arm/mach-mvebu/efuse.c
@@ -10,6 +10,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/efuse.h>
 #include <asm/arch/soc.h>
+#include <asm/gpio.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/mbus.h>
@@ -56,17 +57,48 @@ static struct mvebu_hd_efuse *get_efuse_line(int nr)
 	return efuses + nr;
 }
 
-static void enable_efuse_program(void)
+#ifndef DRY_RUN
+static int vhv_gpio;
+#endif
+
+static int enable_efuse_program(void)
 {
 #ifndef DRY_RUN
+	if (CONFIG_MVEBU_EFUSE_VHV_GPIO[0]) {
+		if (gpio_lookup_name(CONFIG_MVEBU_EFUSE_VHV_GPIO, NULL, NULL, &vhv_gpio)) {
+			printf("Error: VHV gpio lookup failed\n");
+			return -EOPNOTSUPP;
+		}
+		if (gpio_request(vhv_gpio, CONFIG_MVEBU_EFUSE_VHV_GPIO)) {
+			printf("Error: VHV gpio request failed\n");
+			return -EOPNOTSUPP;
+		}
+		if (gpio_direction_output(vhv_gpio,
+		    IS_ENABLED(CONFIG_MVEBU_EFUSE_VHV_GPIO_ACTIVE_LOW) ? 0 : 1)) {
+			printf("Error: VHV gpio enable failed\n");
+			return -EINVAL;
+		}
+		mdelay(5); /* Wait for the VHV power to stabilize */
+	}
+
 	setbits_le32(MVEBU_EFUSE_CONTROL, MVEBU_EFUSE_CTRL_PROGRAM_ENABLE);
 #endif
+
+	return 0;
 }
 
 static void disable_efuse_program(void)
 {
 #ifndef DRY_RUN
 	clrbits_le32(MVEBU_EFUSE_CONTROL, MVEBU_EFUSE_CTRL_PROGRAM_ENABLE);
+
+	if (CONFIG_MVEBU_EFUSE_VHV_GPIO[0]) {
+		if (gpio_direction_output(vhv_gpio,
+		    IS_ENABLED(CONFIG_MVEBU_EFUSE_VHV_GPIO_ACTIVE_LOW) ? 1 : 0))
+			printf("Error: VHV gpio disable failed\n");
+		gpio_free(vhv_gpio);
+		vhv_gpio = 0;
+	}
 #endif
 }
 
@@ -123,7 +155,9 @@ static int prog_efuse(int nr, struct efuse_val *new_val, u32 mask0, u32 mask1)
 	if (!new_val->dwords.d[0] && !new_val->dwords.d[1] && (mask0 | mask1))
 		return 0;
 
-	enable_efuse_program();
+	res = enable_efuse_program();
+	if (res)
+		return res;
 
 	res = do_prog_efuse(efuse, new_val, mask0, mask1);
 
@@ -155,7 +189,9 @@ int mvebu_prog_ld_efuse(int ld1, u32 word, u32 val)
 	if (val == (line[word] & val))
 		return 0;
 
-	enable_efuse_program();
+	res = enable_efuse_program();
+	if (res)
+		return res;
 
 	mvebu_read_ld_efuse(ld1, line);
 	line[word] |= val;