mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-17 02:15:02 +00:00
ARM: dts: stm32: Drop remnants of upstream DT switch on DH STM32 DHSOM
Remove unused local DT copies after the OF_UPSTREAM conversion.
Fixes: cccb29fc12 ("ARM: dts: stm32: Switch to using upstream DT on DH STM32 DHSOM")
Reported-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
This commit is contained in:
Marek Vasut
Patrick Delaunay
parent
cca05617a8
commit
635e9483c8
3 changed files with 0 additions and 376 deletions
|
|
@ -1,308 +0,0 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) 2024 Marek Vasut <marex@denx.de>
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/mfd/st,stpmic1.h>
|
||||
#include <dt-bindings/regulator/st,stm32mp13-regulator.h>
|
||||
#include "stm32mp13-pinctrl.dtsi"
|
||||
|
||||
/ {
|
||||
model = "DH electronics STM32MP13xx DHCOR SoM";
|
||||
compatible = "dh,stm32mp131a-dhcor-som",
|
||||
"st,stm32mp131";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdmmc2;
|
||||
mmc1 = &sdmmc1;
|
||||
serial0 = &uart4;
|
||||
serial1 = &uart7;
|
||||
rtc0 = &rv3032;
|
||||
spi0 = &qspi;
|
||||
};
|
||||
|
||||
memory@c0000000 {
|
||||
device_type = "memory";
|
||||
reg = <0xc0000000 0x20000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
optee@dd000000 {
|
||||
reg = <0xdd000000 0x3000000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpiof 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vin: vin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vin";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
i2c-scl-rising-time-ns = <96>;
|
||||
i2c-scl-falling-time-ns = <3>;
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
/* spare dmas for other usage */
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
|
||||
pmic: stpmic@33 {
|
||||
compatible = "st,stpmic1";
|
||||
reg = <0x33>;
|
||||
interrupts-extended = <&gpioi 3 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
status = "okay";
|
||||
|
||||
regulators {
|
||||
compatible = "st,stpmic1-regulators";
|
||||
|
||||
ldo1-supply = <&vin>;
|
||||
ldo2-supply = <&vin>;
|
||||
ldo3-supply = <&vin>;
|
||||
ldo4-supply = <&vin>;
|
||||
ldo5-supply = <&vin>;
|
||||
ldo6-supply = <&vin>;
|
||||
pwr_sw1-supply = <&bst_out>;
|
||||
pwr_sw2-supply = <&bst_out>;
|
||||
|
||||
vddcpu: buck1 { /* VDD_CPU_1V2 */
|
||||
regulator-name = "vddcpu";
|
||||
regulator-min-microvolt = <1250000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_ddr: buck2 { /* VDD_DDR_1V35 */
|
||||
regulator-name = "vdd_ddr";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd: buck3 { /* VDD_3V3_1V8 */
|
||||
regulator-name = "vdd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vddcore: buck4 { /* VDD_CORE_1V2 */
|
||||
regulator-name = "vddcore";
|
||||
regulator-min-microvolt = <1250000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_adc: ldo1 { /* VDD_ADC_1V8 */
|
||||
regulator-name = "vdd_adc";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
interrupts = <IT_CURLIM_LDO1 0>;
|
||||
};
|
||||
|
||||
vdd_ldo2: ldo2 { /* LDO2_OUT_1V8 */
|
||||
regulator-name = "vdd_ldo2";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
interrupts = <IT_CURLIM_LDO2 0>;
|
||||
};
|
||||
|
||||
vdd_ldo3: ldo3 { /* LDO3_OUT */
|
||||
regulator-name = "vdd_ldo3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
interrupts = <IT_CURLIM_LDO3 0>;
|
||||
};
|
||||
|
||||
vdd_usb: ldo4 { /* VDD_USB_3V3 */
|
||||
regulator-name = "vdd_usb";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
interrupts = <IT_CURLIM_LDO4 0>;
|
||||
};
|
||||
|
||||
vdd_sd: ldo5 { /* VDD_SD_3V3_1V8 */
|
||||
regulator-name = "vdd_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
interrupts = <IT_CURLIM_LDO5 0>;
|
||||
};
|
||||
|
||||
vdd_sd2: ldo6 { /* VDD_SD2_3V3_1V8 */
|
||||
regulator-name = "vdd_sd2";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
interrupts = <IT_CURLIM_LDO6 0>;
|
||||
};
|
||||
|
||||
vref_ddr: vref_ddr { /* VREF_DDR_0V675 */
|
||||
regulator-name = "vref_ddr";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
bst_out: boost { /* BST_OUT_5V2 */
|
||||
regulator-name = "bst_out";
|
||||
};
|
||||
|
||||
vbus_otg: pwr_sw1 {
|
||||
regulator-name = "vbus_otg";
|
||||
interrupts = <IT_OCP_OTG 0>;
|
||||
};
|
||||
|
||||
vbus_sw: pwr_sw2 {
|
||||
regulator-name = "vbus_sw";
|
||||
interrupts = <IT_OCP_SWOUT 0>;
|
||||
regulator-active-discharge = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
onkey {
|
||||
compatible = "st,stpmic1-onkey";
|
||||
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
|
||||
interrupt-names = "onkey-falling", "onkey-rising";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "st,stpmic1-wdt";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
eeprom0: eeprom@50 {
|
||||
compatible = "atmel,24c256"; /* ST M24256 */
|
||||
reg = <0x50>;
|
||||
pagesize = <64>;
|
||||
};
|
||||
|
||||
rv3032: rtc@51 {
|
||||
compatible = "microcrystal,rv3032";
|
||||
reg = <0x51>;
|
||||
interrupts-extended = <&gpioi 0 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
};
|
||||
|
||||
&iwdg2 {
|
||||
timeout-sec = <32>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qspi {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&qspi_clk_pins_a
|
||||
&qspi_bk1_pins_a
|
||||
&qspi_cs1_pins_a>;
|
||||
pinctrl-1 = <&qspi_clk_sleep_pins_a
|
||||
&qspi_bk1_sleep_pins_a
|
||||
&qspi_cs1_sleep_pins_a>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
flash0: flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-max-frequency = <108000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Console UART */
|
||||
&uart4 {
|
||||
pinctrl-names = "default", "sleep", "idle";
|
||||
pinctrl-0 = <&uart4_pins_b>;
|
||||
pinctrl-1 = <&uart4_sleep_pins_b>;
|
||||
pinctrl-2 = <&uart4_idle_pins_b>;
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Bluetooth */
|
||||
&uart7 {
|
||||
pinctrl-names = "default", "sleep", "idle";
|
||||
pinctrl-0 = <&uart7_pins_a>;
|
||||
pinctrl-1 = <&uart7_sleep_pins_a>;
|
||||
pinctrl-2 = <&uart7_idle_pins_a>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt";
|
||||
max-speed = <3000000>;
|
||||
device-wakeup-gpios = <&gpiog 9 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
/* SDIO WiFi */
|
||||
&sdmmc1 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
|
||||
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
|
||||
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
|
||||
bus-width = <4>;
|
||||
cap-power-off-card;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
st,neg-edge;
|
||||
vmmc-supply = <&vdd>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
status = "okay";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
brcmf: bcrmf@1 { /* muRata 1YN */
|
||||
reg = <1>;
|
||||
compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&gpioe>;
|
||||
interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-names = "host-wake";
|
||||
};
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sdmmc2 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>;
|
||||
pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>;
|
||||
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
|
||||
bus-width = <8>;
|
||||
mmc-ddr-3_3v;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
st,neg-edge;
|
||||
vmmc-supply = <&vdd>;
|
||||
vqmmc-supply = <&vdd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -1,30 +0,0 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) 2022 Marek Vasut <marex@denx.de>
|
||||
*
|
||||
* DHCOR STM32MP1 variant:
|
||||
* DHCR-STM32MP153C-C065-R051-V33-SPI-I-01LG
|
||||
* DHCOR PCB number: 586-100 or newer
|
||||
* DRC Compact PCB number: 627-100 or newer
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp153.dtsi"
|
||||
#include "stm32mp15xc.dtsi"
|
||||
#include "stm32mp15xx-dhcor-som.dtsi"
|
||||
#include "stm32mp15xx-dhcor-drc-compact.dtsi"
|
||||
|
||||
/ {
|
||||
model = "DH electronics STM32MP153C DHCOR DRC Compact";
|
||||
compatible = "dh,stm32mp153c-dhcor-drc-compact",
|
||||
"dh,stm32mp153c-dhcor-som",
|
||||
"st,stm32mp153";
|
||||
};
|
||||
|
||||
&m_can1 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&m_can1_pins_c>;
|
||||
pinctrl-1 = <&m_can1_sleep_pins_c>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -1,38 +0,0 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) Linaro Ltd 2019 - All Rights Reserved
|
||||
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
* Copyright (C) 2020 Marek Vasut <marex@denx.de>
|
||||
*
|
||||
* DHCOR STM32MP1 variant:
|
||||
* DHCR-STM32MP157A-C065-R102-V18-SPI-C-01LG
|
||||
* DHCOR PCB number: 586-100 or newer
|
||||
* Avenger96 PCB number: 588-200 or newer
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157.dtsi"
|
||||
#include "stm32mp15xc.dtsi"
|
||||
#include "stm32mp15xx-dhcor-som.dtsi"
|
||||
#include "stm32mp15xx-dhcor-avenger96.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Arrow Electronics STM32MP157A Avenger96 board";
|
||||
compatible = "arrow,stm32mp157a-avenger96", "dh,stm32mp157a-dhcor-som",
|
||||
"st,stm32mp157";
|
||||
};
|
||||
|
||||
&m_can1 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&m_can1_pins_b>;
|
||||
pinctrl-1 = <&m_can1_sleep_pins_b>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&m_can2 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&m_can2_pins_a>;
|
||||
pinctrl-1 = <&m_can2_sleep_pins_a>;
|
||||
status = "disabled";
|
||||
};
|
||||
Loading…
Add table
Reference in a new issue