mirror of
https://github.com/u-boot/u-boot.git
synced 2025-04-18 10:54:37 +00:00
Merge branch 'staging' of https://source.denx.de/u-boot/custodians/u-boot-tegra into next
Device tree improvents for Paz00 and DM PMIC convertion of recently merged Tegra boards.
This commit is contained in:
Tom Rini
commit
4a363dd516
52 changed files with 1053 additions and 1250 deletions
|
|
@ -315,20 +315,19 @@
|
||||||
clock-frequency = <100000>;
|
clock-frequency = <100000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
nvec@7000c500 {
|
i2c@7000c500 {
|
||||||
compatible = "nvidia,nvec";
|
compatible = "nvidia,nvec";
|
||||||
reg = <0x7000c500 0x100>;
|
|
||||||
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
|
/delete-property/ #address-cells;
|
||||||
#address-cells = <1>;
|
/delete-property/ #size-cells;
|
||||||
#size-cells = <0>;
|
/delete-property/ dmas;
|
||||||
|
/delete-property/ dma-names;
|
||||||
|
|
||||||
clock-frequency = <80000>;
|
clock-frequency = <80000>;
|
||||||
request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
|
request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
|
||||||
slave-addr = <138>;
|
slave-addr = <138>;
|
||||||
clocks = <&tegra_car TEGRA20_CLK_I2C3>,
|
|
||||||
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
|
status = "okay";
|
||||||
clock-names = "div-clk", "fast-clk";
|
|
||||||
resets = <&tegra_car 67>;
|
|
||||||
reset-names = "i2c";
|
|
||||||
};
|
};
|
||||||
|
|
||||||
i2c@7000d000 {
|
i2c@7000d000 {
|
||||||
|
|
|
||||||
|
|
@ -71,6 +71,13 @@
|
||||||
dr_mode = "otg";
|
dr_mode = "otg";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
usb-phy@7d000000 {
|
||||||
|
status = "okay";
|
||||||
|
nvidia,hssync-start-delay = <0>;
|
||||||
|
nvidia,xcvr-lsfslew = <2>;
|
||||||
|
nvidia,xcvr-lsrslew = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
backlight: backlight {
|
backlight: backlight {
|
||||||
compatible = "pwm-backlight";
|
compatible = "pwm-backlight";
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -35,6 +35,7 @@
|
||||||
regulator-name = "vcore_emmc";
|
regulator-name = "vcore_emmc";
|
||||||
regulator-min-microvolt = <2850000>;
|
regulator-min-microvolt = <2850000>;
|
||||||
regulator-max-microvolt = <2850000>;
|
regulator-max-microvolt = <2850000>;
|
||||||
|
regulator-boot-on;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
|
||||||
|
|
@ -36,6 +36,7 @@
|
||||||
regulator-name = "vdd_emmc_core";
|
regulator-name = "vdd_emmc_core";
|
||||||
regulator-min-microvolt = <3300000>;
|
regulator-min-microvolt = <3300000>;
|
||||||
regulator-max-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
||||||
|
regulator-boot-on;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
|
||||||
|
|
@ -35,6 +35,7 @@
|
||||||
regulator-name = "vcore_emmc";
|
regulator-name = "vcore_emmc";
|
||||||
regulator-min-microvolt = <2850000>;
|
regulator-min-microvolt = <2850000>;
|
||||||
regulator-max-microvolt = <2850000>;
|
regulator-max-microvolt = <2850000>;
|
||||||
|
regulator-boot-on;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
|
||||||
|
|
@ -101,6 +101,7 @@
|
||||||
regulator-name = "vdd_emmc_core";
|
regulator-name = "vdd_emmc_core";
|
||||||
regulator-min-microvolt = <3300000>;
|
regulator-min-microvolt = <3300000>;
|
||||||
regulator-max-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
||||||
|
regulator-boot-on;
|
||||||
};
|
};
|
||||||
|
|
||||||
/* uSD slot VDD */
|
/* uSD slot VDD */
|
||||||
|
|
@ -108,6 +109,7 @@
|
||||||
regulator-name = "vdd_usd";
|
regulator-name = "vdd_usd";
|
||||||
regulator-min-microvolt = <3100000>;
|
regulator-min-microvolt = <3100000>;
|
||||||
regulator-max-microvolt = <3100000>;
|
regulator-max-microvolt = <3100000>;
|
||||||
|
regulator-boot-on;
|
||||||
};
|
};
|
||||||
|
|
||||||
/* uSD slot VDDIO */
|
/* uSD slot VDDIO */
|
||||||
|
|
@ -148,17 +150,32 @@
|
||||||
dr_mode = "otg";
|
dr_mode = "otg";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
usb-phy@7d000000 {
|
||||||
|
status = "okay";
|
||||||
|
nvidia,hssync-start-delay = <0>;
|
||||||
|
nvidia,xcvr-lsfslew = <2>;
|
||||||
|
nvidia,xcvr-lsrslew = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
/* Mini USB port */
|
/* Mini USB port */
|
||||||
usb2: usb@7d004000 {
|
usb2: usb@7d004000 {
|
||||||
status = "okay";
|
status = "okay";
|
||||||
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
|
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
usb-phy@7d004000 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
/* Dock's USB port */
|
/* Dock's USB port */
|
||||||
usb3: usb@7d008000 {
|
usb3: usb@7d008000 {
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
usb-phy@7d008000 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
/* PMIC has a built-in 32KHz oscillator which is used by PMC */
|
/* PMIC has a built-in 32KHz oscillator which is used by PMC */
|
||||||
clk32k_in: clock-32k {
|
clk32k_in: clock-32k {
|
||||||
compatible = "fixed-clock";
|
compatible = "fixed-clock";
|
||||||
|
|
|
||||||
|
|
@ -84,12 +84,14 @@
|
||||||
regulator-name = "vdd_1v2_backlight";
|
regulator-name = "vdd_1v2_backlight";
|
||||||
regulator-min-microvolt = <1200000>;
|
regulator-min-microvolt = <1200000>;
|
||||||
regulator-max-microvolt = <1200000>;
|
regulator-max-microvolt = <1200000>;
|
||||||
|
regulator-boot-on;
|
||||||
};
|
};
|
||||||
|
|
||||||
vcore_lcd: vdd2 {
|
vcore_lcd: vdd2 {
|
||||||
regulator-name = "vcore_lcd";
|
regulator-name = "vcore_lcd";
|
||||||
regulator-min-microvolt = <1500000>;
|
regulator-min-microvolt = <1500000>;
|
||||||
regulator-max-microvolt = <1500000>;
|
regulator-max-microvolt = <1500000>;
|
||||||
|
regulator-boot-on;
|
||||||
};
|
};
|
||||||
|
|
||||||
vdd_1v8_vio: vddio {
|
vdd_1v8_vio: vddio {
|
||||||
|
|
@ -105,6 +107,7 @@
|
||||||
regulator-name = "vdd_emmc_core";
|
regulator-name = "vdd_emmc_core";
|
||||||
regulator-min-microvolt = <3300000>;
|
regulator-min-microvolt = <3300000>;
|
||||||
regulator-max-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
||||||
|
regulator-boot-on;
|
||||||
};
|
};
|
||||||
|
|
||||||
/* uSD slot VDDIO */
|
/* uSD slot VDDIO */
|
||||||
|
|
@ -119,6 +122,7 @@
|
||||||
regulator-name = "avdd_dsi_csi";
|
regulator-name = "avdd_dsi_csi";
|
||||||
regulator-min-microvolt = <1200000>;
|
regulator-min-microvolt = <1200000>;
|
||||||
regulator-max-microvolt = <1200000>;
|
regulator-max-microvolt = <1200000>;
|
||||||
|
regulator-boot-on;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
@ -161,11 +165,22 @@
|
||||||
dr_mode = "otg";
|
dr_mode = "otg";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
usb-phy@7d000000 {
|
||||||
|
status = "okay";
|
||||||
|
nvidia,hssync-start-delay = <0>;
|
||||||
|
nvidia,xcvr-lsfslew = <2>;
|
||||||
|
nvidia,xcvr-lsrslew = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
/* Dock's USB port */
|
/* Dock's USB port */
|
||||||
usb3: usb@7d008000 {
|
usb3: usb@7d008000 {
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
usb-phy@7d008000 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
backlight: backlight {
|
backlight: backlight {
|
||||||
compatible = "pwm-backlight";
|
compatible = "pwm-backlight";
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -82,6 +82,7 @@
|
||||||
regulator-name = "vdd_emmc_core";
|
regulator-name = "vdd_emmc_core";
|
||||||
regulator-min-microvolt = <3300000>;
|
regulator-min-microvolt = <3300000>;
|
||||||
regulator-max-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
||||||
|
regulator-boot-on;
|
||||||
};
|
};
|
||||||
|
|
||||||
/* uSD slot VDD */
|
/* uSD slot VDD */
|
||||||
|
|
@ -89,6 +90,7 @@
|
||||||
regulator-name = "vdd_usd";
|
regulator-name = "vdd_usd";
|
||||||
regulator-min-microvolt = <3100000>;
|
regulator-min-microvolt = <3100000>;
|
||||||
regulator-max-microvolt = <3100000>;
|
regulator-max-microvolt = <3100000>;
|
||||||
|
regulator-boot-on;
|
||||||
};
|
};
|
||||||
|
|
||||||
/* uSD slot VDDIO */
|
/* uSD slot VDDIO */
|
||||||
|
|
@ -129,6 +131,13 @@
|
||||||
dr_mode = "otg";
|
dr_mode = "otg";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
usb-phy@7d000000 {
|
||||||
|
status = "okay";
|
||||||
|
nvidia,hssync-start-delay = <0>;
|
||||||
|
nvidia,xcvr-lsfslew = <2>;
|
||||||
|
nvidia,xcvr-lsrslew = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
/* Dock's USB port */
|
/* Dock's USB port */
|
||||||
usb3: usb@7d008000 {
|
usb3: usb@7d008000 {
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
|
|
||||||
|
|
@ -81,6 +81,7 @@
|
||||||
regulator-name = "avdd_dsi_csi";
|
regulator-name = "avdd_dsi_csi";
|
||||||
regulator-min-microvolt = <1200000>;
|
regulator-min-microvolt = <1200000>;
|
||||||
regulator-max-microvolt = <1200000>;
|
regulator-max-microvolt = <1200000>;
|
||||||
|
regulator-boot-on;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
@ -100,6 +101,13 @@
|
||||||
dr_mode = "otg";
|
dr_mode = "otg";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
usb-phy@7d000000 {
|
||||||
|
status = "okay";
|
||||||
|
nvidia,hssync-start-delay = <0>;
|
||||||
|
nvidia,xcvr-lsfslew = <2>;
|
||||||
|
nvidia,xcvr-lsrslew = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
backlight: backlight {
|
backlight: backlight {
|
||||||
compatible = "nvidia,tegra-pwm-backlight";
|
compatible = "nvidia,tegra-pwm-backlight";
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -110,6 +110,7 @@
|
||||||
regulator-name = "vdd_ddr_rx";
|
regulator-name = "vdd_ddr_rx";
|
||||||
regulator-min-microvolt = <2850000>;
|
regulator-min-microvolt = <2850000>;
|
||||||
regulator-max-microvolt = <2850000>;
|
regulator-max-microvolt = <2850000>;
|
||||||
|
regulator-boot-on;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
@ -152,6 +153,14 @@
|
||||||
dr_mode = "otg";
|
dr_mode = "otg";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
usb-phy@7d000000 {
|
||||||
|
status = "okay";
|
||||||
|
nvidia,hssync-start-delay = <0>;
|
||||||
|
nvidia,xcvr-lsfslew = <2>;
|
||||||
|
nvidia,xcvr-lsrslew = <2>;
|
||||||
|
vbus-supply = <&avdd_3v3_periph>;
|
||||||
|
};
|
||||||
|
|
||||||
/* PMIC has a built-in 32KHz oscillator which is used by PMC */
|
/* PMIC has a built-in 32KHz oscillator which is used by PMC */
|
||||||
clk32k_in: clock-32k {
|
clk32k_in: clock-32k {
|
||||||
compatible = "fixed-clock";
|
compatible = "fixed-clock";
|
||||||
|
|
|
||||||
|
|
@ -11,6 +11,7 @@
|
||||||
#include <init.h>
|
#include <init.h>
|
||||||
#include <log.h>
|
#include <log.h>
|
||||||
#include <ns16550.h>
|
#include <ns16550.h>
|
||||||
|
#include <power/regulator.h>
|
||||||
#include <usb.h>
|
#include <usb.h>
|
||||||
#include <asm/global_data.h>
|
#include <asm/global_data.h>
|
||||||
#include <asm/io.h>
|
#include <asm/io.h>
|
||||||
|
|
@ -185,6 +186,10 @@ int board_init(void)
|
||||||
/* prepare the WB code to LP0 location */
|
/* prepare the WB code to LP0 location */
|
||||||
warmboot_prepare_code(TEGRA_LP0_ADDR, TEGRA_LP0_SIZE);
|
warmboot_prepare_code(TEGRA_LP0_ADDR, TEGRA_LP0_SIZE);
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/* Set up boot-on regulators */
|
||||||
|
regulators_enable_boot_on(_DEBUG);
|
||||||
|
|
||||||
return nvidia_board_init();
|
return nvidia_board_init();
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -9,12 +9,4 @@ config SYS_VENDOR
|
||||||
config SYS_CONFIG_NAME
|
config SYS_CONFIG_NAME
|
||||||
default "grouper"
|
default "grouper"
|
||||||
|
|
||||||
config GROUPER_TPS65911
|
|
||||||
bool "Enable support TI TPS65911 PMIC"
|
|
||||||
select CMD_POWEROFF
|
|
||||||
|
|
||||||
config GROUPER_MAX77663
|
|
||||||
bool "Enable support MAXIM MAX77663 PMIC"
|
|
||||||
select CMD_POWEROFF
|
|
||||||
|
|
||||||
endif
|
endif
|
||||||
|
|
|
||||||
|
|
@ -7,8 +7,8 @@
|
||||||
# Svyatoslav Ryhel <clamor95@gmail.com>
|
# Svyatoslav Ryhel <clamor95@gmail.com>
|
||||||
|
|
||||||
ifdef CONFIG_SPL_BUILD
|
ifdef CONFIG_SPL_BUILD
|
||||||
obj-$(CONFIG_GROUPER_MAX77663) += grouper-spl-max.o
|
obj-$(CONFIG_DM_PMIC_MAX77663) += grouper-spl-max.o
|
||||||
obj-$(CONFIG_GROUPER_TPS65911) += grouper-spl-ti.o
|
obj-$(CONFIG_DM_PMIC_TPS65910) += grouper-spl-ti.o
|
||||||
endif
|
endif
|
||||||
|
|
||||||
obj-y += grouper.o
|
obj-y += grouper.o
|
||||||
|
|
|
||||||
|
|
@ -1,2 +1,6 @@
|
||||||
CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-nexus7-grouper-E1565"
|
CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-nexus7-grouper-E1565"
|
||||||
CONFIG_GROUPER_MAX77663=y
|
CONFIG_CMD_POWEROFF=y
|
||||||
|
# CONFIG_MAX77663_GPIO is not set
|
||||||
|
CONFIG_DM_PMIC_MAX77663=y
|
||||||
|
CONFIG_DM_REGULATOR_MAX77663=y
|
||||||
|
CONFIG_SYSRESET_MAX77663=y
|
||||||
|
|
|
||||||
|
|
@ -1,2 +1,6 @@
|
||||||
CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-nexus7-grouper-PM269"
|
CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-nexus7-grouper-PM269"
|
||||||
CONFIG_GROUPER_TPS65911=y
|
CONFIG_CMD_POWEROFF=y
|
||||||
|
CONFIG_DM_PMIC_TPS65910=y
|
||||||
|
# CONFIG_DM_REGULATOR_TPS65910 is not set
|
||||||
|
CONFIG_DM_REGULATOR_TPS65911=y
|
||||||
|
CONFIG_SYSRESET_TPS65910=y
|
||||||
|
|
|
||||||
|
|
@ -1,3 +1,7 @@
|
||||||
CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-nexus7-tilapia-E1565"
|
CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-nexus7-tilapia-E1565"
|
||||||
CONFIG_GROUPER_MAX77663=y
|
|
||||||
CONFIG_SYS_PROMPT="Tegra30 (Tilapia) # "
|
CONFIG_SYS_PROMPT="Tegra30 (Tilapia) # "
|
||||||
|
CONFIG_CMD_POWEROFF=y
|
||||||
|
# CONFIG_MAX77663_GPIO is not set
|
||||||
|
CONFIG_DM_PMIC_MAX77663=y
|
||||||
|
CONFIG_DM_REGULATOR_MAX77663=y
|
||||||
|
CONFIG_SYSRESET_MAX77663=y
|
||||||
|
|
|
||||||
|
|
@ -9,7 +9,7 @@
|
||||||
* Svyatoslav Ryhel <clamor95@gmail.com>
|
* Svyatoslav Ryhel <clamor95@gmail.com>
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <common.h>
|
#include <asm/arch/tegra.h>
|
||||||
#include <asm/arch-tegra/tegra_i2c.h>
|
#include <asm/arch-tegra/tegra_i2c.h>
|
||||||
#include <linux/delay.h>
|
#include <linux/delay.h>
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -9,7 +9,7 @@
|
||||||
* Svyatoslav Ryhel <clamor95@gmail.com>
|
* Svyatoslav Ryhel <clamor95@gmail.com>
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <common.h>
|
#include <asm/arch/tegra.h>
|
||||||
#include <asm/arch-tegra/tegra_i2c.h>
|
#include <asm/arch-tegra/tegra_i2c.h>
|
||||||
#include <linux/delay.h>
|
#include <linux/delay.h>
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -7,106 +7,13 @@
|
||||||
* Svyatoslav Ryhel <clamor95@gmail.com>
|
* Svyatoslav Ryhel <clamor95@gmail.com>
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <dm.h>
|
#include <dm.h>
|
||||||
#include <fdt_support.h>
|
#include <fdt_support.h>
|
||||||
#include <i2c.h>
|
|
||||||
#include <log.h>
|
|
||||||
#include <asm/arch/pinmux.h>
|
#include <asm/arch/pinmux.h>
|
||||||
#include <asm/arch/gp_padctrl.h>
|
#include <asm/arch/gp_padctrl.h>
|
||||||
#include <asm/arch/gpio.h>
|
|
||||||
#include <asm/gpio.h>
|
|
||||||
#include <linux/delay.h>
|
|
||||||
#include "pinmux-config-grouper.h"
|
#include "pinmux-config-grouper.h"
|
||||||
|
|
||||||
#define TPS65911_I2C_ADDRESS 0x2D
|
|
||||||
|
|
||||||
#define TPS65911_REG_LDO1 0x30
|
|
||||||
#define TPS65911_REG_DEVCTRL 0x3F
|
|
||||||
#define DEVCTRL_PWR_OFF_MASK BIT(7)
|
|
||||||
#define DEVCTRL_DEV_ON_MASK BIT(2)
|
|
||||||
#define DEVCTRL_DEV_OFF_MASK BIT(0)
|
|
||||||
|
|
||||||
#define MAX77663_I2C_ADDRESS 0x3C
|
|
||||||
|
|
||||||
#define MAX77663_REG_SD2 0x18
|
|
||||||
#define MAX77663_REG_LDO3 0x29
|
|
||||||
#define MAX77663_REG_ONOFF_CFG1 0x41
|
|
||||||
#define ONOFF_PWR_OFF BIT(1)
|
|
||||||
|
|
||||||
#ifdef CONFIG_CMD_POWEROFF
|
|
||||||
#ifdef CONFIG_GROUPER_TPS65911
|
|
||||||
int do_poweroff(struct cmd_tbl *cmdtp,
|
|
||||||
int flag, int argc, char *const argv[])
|
|
||||||
{
|
|
||||||
struct udevice *dev;
|
|
||||||
uchar data_buffer[1];
|
|
||||||
int ret;
|
|
||||||
|
|
||||||
ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev);
|
|
||||||
if (ret) {
|
|
||||||
log_debug("cannot find PMIC I2C chip\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
ret = dm_i2c_read(dev, TPS65911_REG_DEVCTRL, data_buffer, 1);
|
|
||||||
if (ret)
|
|
||||||
return ret;
|
|
||||||
|
|
||||||
data_buffer[0] |= DEVCTRL_PWR_OFF_MASK;
|
|
||||||
|
|
||||||
ret = dm_i2c_write(dev, TPS65911_REG_DEVCTRL, data_buffer, 1);
|
|
||||||
if (ret)
|
|
||||||
return ret;
|
|
||||||
|
|
||||||
data_buffer[0] |= DEVCTRL_DEV_OFF_MASK;
|
|
||||||
data_buffer[0] &= ~DEVCTRL_DEV_ON_MASK;
|
|
||||||
|
|
||||||
ret = dm_i2c_write(dev, TPS65911_REG_DEVCTRL, data_buffer, 1);
|
|
||||||
if (ret)
|
|
||||||
return ret;
|
|
||||||
|
|
||||||
// wait some time and then print error
|
|
||||||
mdelay(5000);
|
|
||||||
|
|
||||||
printf("Failed to power off!!!\n");
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
#endif /* CONFIG_GROUPER_TPS65911 */
|
|
||||||
|
|
||||||
#ifdef CONFIG_GROUPER_MAX77663
|
|
||||||
int do_poweroff(struct cmd_tbl *cmdtp,
|
|
||||||
int flag, int argc, char *const argv[])
|
|
||||||
{
|
|
||||||
struct udevice *dev;
|
|
||||||
uchar data_buffer[1];
|
|
||||||
int ret;
|
|
||||||
|
|
||||||
ret = i2c_get_chip_for_busnum(0, MAX77663_I2C_ADDRESS, 1, &dev);
|
|
||||||
if (ret) {
|
|
||||||
log_debug("cannot find PMIC I2C chip\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
ret = dm_i2c_read(dev, MAX77663_REG_ONOFF_CFG1, data_buffer, 1);
|
|
||||||
if (ret)
|
|
||||||
return ret;
|
|
||||||
|
|
||||||
data_buffer[0] |= ONOFF_PWR_OFF;
|
|
||||||
|
|
||||||
ret = dm_i2c_write(dev, MAX77663_REG_ONOFF_CFG1, data_buffer, 1);
|
|
||||||
if (ret)
|
|
||||||
return ret;
|
|
||||||
|
|
||||||
// wait some time and then print error
|
|
||||||
mdelay(5000);
|
|
||||||
|
|
||||||
printf("Failed to power off!!!\n");
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
#endif /* CONFIG_GROUPER_MAX77663 */
|
|
||||||
#endif /* CONFIG_CMD_POWEROFF */
|
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Routine: pinmux_init
|
* Routine: pinmux_init
|
||||||
* Description: Do individual peripheral pinmux configs
|
* Description: Do individual peripheral pinmux configs
|
||||||
|
|
@ -120,64 +27,6 @@ void pinmux_init(void)
|
||||||
ARRAY_SIZE(grouper_padctrl));
|
ARRAY_SIZE(grouper_padctrl));
|
||||||
}
|
}
|
||||||
|
|
||||||
#ifdef CONFIG_MMC_SDHCI_TEGRA
|
|
||||||
static void __maybe_unused tps65911_voltage_init(void)
|
|
||||||
{
|
|
||||||
struct udevice *dev;
|
|
||||||
int ret;
|
|
||||||
|
|
||||||
ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev);
|
|
||||||
if (ret) {
|
|
||||||
log_debug("cannot find PMIC I2C chip\n");
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* TPS659110: LDO1_REG = 3.3v, ACTIVE to SDMMC4 */
|
|
||||||
ret = dm_i2c_reg_write(dev, TPS65911_REG_LDO1, 0xC9);
|
|
||||||
if (ret)
|
|
||||||
log_debug("vcore_emmc set failed: %d\n", ret);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void __maybe_unused max77663_voltage_init(void)
|
|
||||||
{
|
|
||||||
struct udevice *dev;
|
|
||||||
int ret;
|
|
||||||
|
|
||||||
ret = i2c_get_chip_for_busnum(0, MAX77663_I2C_ADDRESS, 1, &dev);
|
|
||||||
if (ret) {
|
|
||||||
log_debug("cannot find PMIC I2C chip\n");
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* 0x60 for 1.8v, bit7:0 = voltage */
|
|
||||||
ret = dm_i2c_reg_write(dev, MAX77663_REG_SD2, 0x60);
|
|
||||||
if (ret)
|
|
||||||
log_debug("vdd_1v8_vio set failed: %d\n", ret);
|
|
||||||
|
|
||||||
/* 0xEC for 3.00v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
|
|
||||||
ret = dm_i2c_reg_write(dev, MAX77663_REG_LDO3, 0xEC);
|
|
||||||
if (ret)
|
|
||||||
log_debug("vcore_emmc set failed: %d\n", ret);
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Routine: pin_mux_mmc
|
|
||||||
* Description: setup the MMC muxes, power rails, etc.
|
|
||||||
*/
|
|
||||||
void pin_mux_mmc(void)
|
|
||||||
{
|
|
||||||
#ifdef CONFIG_GROUPER_MAX77663
|
|
||||||
/* Bring up eMMC power on MAX PMIC */
|
|
||||||
max77663_voltage_init();
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifdef CONFIG_GROUPER_TPS65911
|
|
||||||
/* Bring up eMMC power on TI PMIC */
|
|
||||||
tps65911_voltage_init();
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
#endif /* MMC */
|
|
||||||
|
|
||||||
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
||||||
int ft_board_setup(void *blob, struct bd_info *bd)
|
int ft_board_setup(void *blob, struct bd_info *bd)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -9,14 +9,4 @@ config SYS_VENDOR
|
||||||
config SYS_CONFIG_NAME
|
config SYS_CONFIG_NAME
|
||||||
default "transformer-t30"
|
default "transformer-t30"
|
||||||
|
|
||||||
config TRANSFORMER_SPI_BOOT
|
|
||||||
bool "Enable support for SPI based flash"
|
|
||||||
select TEGRA20_SLINK
|
|
||||||
select DM_SPI_FLASH
|
|
||||||
select SPI_FLASH_WINBOND
|
|
||||||
help
|
|
||||||
Tegra 3 based Transformers with Windows RT have core
|
|
||||||
boot sequence (BCT and EBT) on separate SPI FLASH
|
|
||||||
memory with 4MB size.
|
|
||||||
|
|
||||||
endif
|
endif
|
||||||
|
|
|
||||||
|
|
@ -1,4 +1,4 @@
|
||||||
CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf600t"
|
CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf600t"
|
||||||
CONFIG_TRANSFORMER_SPI_BOOT=y
|
|
||||||
CONFIG_BOOTCOMMAND="setenv gpio_button 222; if run check_button; then poweroff; fi; setenv gpio_button 132; if run check_button; then echo Starting SPI flash update ...; run update_spi; fi; run bootcmd_usb0; run bootcmd_mmc1; run bootcmd_mmc0; poweroff;"
|
CONFIG_BOOTCOMMAND="setenv gpio_button 222; if run check_button; then poweroff; fi; setenv gpio_button 132; if run check_button; then echo Starting SPI flash update ...; run update_spi; fi; run bootcmd_usb0; run bootcmd_mmc1; run bootcmd_mmc0; poweroff;"
|
||||||
|
CONFIG_SPI_FLASH_WINBOND=y
|
||||||
CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
|
CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
|
||||||
|
|
|
||||||
|
|
@ -9,7 +9,7 @@
|
||||||
* Svyatoslav Ryhel <clamor95@gmail.com>
|
* Svyatoslav Ryhel <clamor95@gmail.com>
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <common.h>
|
#include <asm/arch/tegra.h>
|
||||||
#include <asm/arch-tegra/tegra_i2c.h>
|
#include <asm/arch-tegra/tegra_i2c.h>
|
||||||
#include <linux/delay.h>
|
#include <linux/delay.h>
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -9,71 +9,13 @@
|
||||||
|
|
||||||
/* T30 Transformers derive from Cardhu board */
|
/* T30 Transformers derive from Cardhu board */
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <dm.h>
|
#include <dm.h>
|
||||||
#include <fdt_support.h>
|
#include <fdt_support.h>
|
||||||
#include <i2c.h>
|
|
||||||
#include <log.h>
|
|
||||||
#include <asm/arch/pinmux.h>
|
#include <asm/arch/pinmux.h>
|
||||||
#include <asm/arch/gp_padctrl.h>
|
#include <asm/arch/gp_padctrl.h>
|
||||||
#include <asm/arch/gpio.h>
|
|
||||||
#include <asm/gpio.h>
|
|
||||||
#include <linux/delay.h>
|
|
||||||
#include "pinmux-config-transformer.h"
|
#include "pinmux-config-transformer.h"
|
||||||
|
|
||||||
#define TPS65911_I2C_ADDRESS 0x2D
|
|
||||||
|
|
||||||
#define TPS65911_VDD1 0x21
|
|
||||||
#define TPS65911_VDD1_OP 0x22
|
|
||||||
#define TPS65911_LDO1 0x30
|
|
||||||
#define TPS65911_LDO2 0x31
|
|
||||||
#define TPS65911_LDO3 0x37
|
|
||||||
#define TPS65911_LDO5 0x32
|
|
||||||
#define TPS65911_LDO6 0x35
|
|
||||||
|
|
||||||
#define TPS65911_DEVCTRL 0x3F
|
|
||||||
#define DEVCTRL_PWR_OFF_MASK BIT(7)
|
|
||||||
#define DEVCTRL_DEV_ON_MASK BIT(2)
|
|
||||||
#define DEVCTRL_DEV_OFF_MASK BIT(0)
|
|
||||||
|
|
||||||
#ifdef CONFIG_CMD_POWEROFF
|
|
||||||
int do_poweroff(struct cmd_tbl *cmdtp, int flag,
|
|
||||||
int argc, char *const argv[])
|
|
||||||
{
|
|
||||||
struct udevice *dev;
|
|
||||||
uchar data_buffer[1];
|
|
||||||
int ret;
|
|
||||||
|
|
||||||
ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev);
|
|
||||||
if (ret) {
|
|
||||||
log_debug("cannot find PMIC I2C chip\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
ret = dm_i2c_read(dev, TPS65911_DEVCTRL, data_buffer, 1);
|
|
||||||
if (ret)
|
|
||||||
return ret;
|
|
||||||
|
|
||||||
data_buffer[0] |= DEVCTRL_PWR_OFF_MASK;
|
|
||||||
|
|
||||||
ret = dm_i2c_write(dev, TPS65911_DEVCTRL, data_buffer, 1);
|
|
||||||
if (ret)
|
|
||||||
return ret;
|
|
||||||
|
|
||||||
data_buffer[0] |= DEVCTRL_DEV_OFF_MASK;
|
|
||||||
data_buffer[0] &= ~DEVCTRL_DEV_ON_MASK;
|
|
||||||
|
|
||||||
ret = dm_i2c_write(dev, TPS65911_DEVCTRL, data_buffer, 1);
|
|
||||||
if (ret)
|
|
||||||
return ret;
|
|
||||||
|
|
||||||
// wait some time and then print error
|
|
||||||
mdelay(5000);
|
|
||||||
printf("Failed to power off!!!\n");
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Routine: pinmux_init
|
* Routine: pinmux_init
|
||||||
* Description: Do individual peripheral pinmux configs
|
* Description: Do individual peripheral pinmux configs
|
||||||
|
|
@ -92,66 +34,6 @@ void pinmux_init(void)
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
#ifdef CONFIG_MMC_SDHCI_TEGRA
|
|
||||||
static void tps65911_voltage_init(void)
|
|
||||||
{
|
|
||||||
struct udevice *dev;
|
|
||||||
int ret;
|
|
||||||
|
|
||||||
ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev);
|
|
||||||
if (ret) {
|
|
||||||
log_debug("cannot find PMIC I2C chip\n");
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* TPS659110: LDO1_REG = 3.3v, ACTIVE to SDMMC4 */
|
|
||||||
ret = dm_i2c_reg_write(dev, TPS65911_LDO1, 0xc9);
|
|
||||||
if (ret)
|
|
||||||
log_debug("vcore_emmc set failed: %d\n", ret);
|
|
||||||
|
|
||||||
if (of_machine_is_compatible("asus,tf600t")) {
|
|
||||||
/* TPS659110: VDD1_REG = 1.2v, ACTIVE to backlight */
|
|
||||||
ret = dm_i2c_reg_write(dev, TPS65911_VDD1_OP, 0x33);
|
|
||||||
if (ret)
|
|
||||||
log_debug("vdd_bl set failed: %d\n", ret);
|
|
||||||
|
|
||||||
ret = dm_i2c_reg_write(dev, TPS65911_VDD1, 0x0d);
|
|
||||||
if (ret)
|
|
||||||
log_debug("vdd_bl enable failed: %d\n", ret);
|
|
||||||
|
|
||||||
/* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 VIO */
|
|
||||||
ret = dm_i2c_reg_write(dev, TPS65911_LDO5, 0x65);
|
|
||||||
if (ret)
|
|
||||||
log_debug("vdd_usd set failed: %d\n", ret);
|
|
||||||
|
|
||||||
/* TPS659110: LDO6_REG = 1.2v, ACTIVE to MIPI */
|
|
||||||
ret = dm_i2c_reg_write(dev, TPS65911_LDO6, 0x11);
|
|
||||||
if (ret)
|
|
||||||
log_debug("vdd_mipi set failed: %d\n", ret);
|
|
||||||
} else {
|
|
||||||
/* TPS659110: LDO2_REG = 3.1v, ACTIVE to SDMMC1 */
|
|
||||||
ret = dm_i2c_reg_write(dev, TPS65911_LDO2, 0xb9);
|
|
||||||
if (ret)
|
|
||||||
log_debug("vdd_usd set failed: %d\n", ret);
|
|
||||||
|
|
||||||
/* TPS659110: LDO3_REG = 3.1v, ACTIVE to SDMMC1 VIO */
|
|
||||||
ret = dm_i2c_reg_write(dev, TPS65911_LDO3, 0x5d);
|
|
||||||
if (ret)
|
|
||||||
log_debug("vddio_usd set failed: %d\n", ret);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Routine: pin_mux_mmc
|
|
||||||
* Description: setup the MMC muxes, power rails, etc.
|
|
||||||
*/
|
|
||||||
void pin_mux_mmc(void)
|
|
||||||
{
|
|
||||||
/* Bring up uSD and eMMC power */
|
|
||||||
tps65911_voltage_init();
|
|
||||||
}
|
|
||||||
#endif /* MMC */
|
|
||||||
|
|
||||||
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
||||||
int ft_board_setup(void *blob, struct bd_info *bd)
|
int ft_board_setup(void *blob, struct bd_info *bd)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -2,5 +2,6 @@ HIKEY BOARD
|
||||||
M: Peter Griffin <peter.griffin@linaro.org>
|
M: Peter Griffin <peter.griffin@linaro.org>
|
||||||
S: Maintained
|
S: Maintained
|
||||||
F: board/hisilicon/hikey
|
F: board/hisilicon/hikey
|
||||||
|
F: doc/board/hisilicon/hikey.rst
|
||||||
F: include/configs/hikey.h
|
F: include/configs/hikey.h
|
||||||
F: configs/hikey_defconfig
|
F: configs/hikey_defconfig
|
||||||
|
|
|
||||||
|
|
@ -1,227 +0,0 @@
|
||||||
Introduction
|
|
||||||
============
|
|
||||||
|
|
||||||
HiKey is the first certified 96Boards Consumer Edition board. The board/SoC has: -
|
|
||||||
* HiSilicon Kirin 6220 eight-core ARM Cortex-A53 64-bit SoC running at 1.2GHz.
|
|
||||||
* ARM Mali 450-MP4 GPU
|
|
||||||
* 1GB 800MHz LPDDR3 DRAM
|
|
||||||
* 4GB eMMC Flash Storage
|
|
||||||
* microSD
|
|
||||||
* 802.11a/b/g/n WiFi, Bluetooth
|
|
||||||
|
|
||||||
The HiKey schematic can be found here: -
|
|
||||||
https://github.com/96boards/documentation/blob/master/consumer/hikey/hikey620/hardware-docs/HiKey_schematics_LeMaker_version_Rev_A1.pdf
|
|
||||||
|
|
||||||
The SoC datasheet can be found here: -
|
|
||||||
https://github.com/96boards/documentation/blob/master/consumer/hikey/hikey620/hardware-docs/Hi6220V100_Multi-Mode_Application_Processor_Function_Description.pdf
|
|
||||||
|
|
||||||
Currently the u-boot port supports: -
|
|
||||||
* USB
|
|
||||||
* eMMC
|
|
||||||
* SD card
|
|
||||||
* GPIO
|
|
||||||
|
|
||||||
The HiKey U-Boot port has been tested with l-loader, booting ATF, which then boots
|
|
||||||
U-Boot as the bl33.bin executable.
|
|
||||||
|
|
||||||
Compile from source
|
|
||||||
===================
|
|
||||||
|
|
||||||
First get all the sources
|
|
||||||
|
|
||||||
> mkdir -p ~/hikey/src ~/hikey/bin
|
|
||||||
> cd ~/hikey/src
|
|
||||||
> git clone https://github.com/96boards-hikey/edk2 -b testing/hikey960_v2.5
|
|
||||||
> git clone https://github.com/ARM-software/arm-trusted-firmware
|
|
||||||
> git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2
|
|
||||||
> git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4
|
|
||||||
> git clone https://github.com/96boards-hikey/atf-fastboot
|
|
||||||
> wget https://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey/release/hisi-idt.py
|
|
||||||
|
|
||||||
Get the BL30 mcuimage.bin binary. It is shipped as part of the UEFI source.
|
|
||||||
The latest version can be obtained from the OpenPlatformPkg repo.
|
|
||||||
|
|
||||||
> cp OpenPlatformPkg/Platforms/Hisilicon/HiKey/Binary/mcuimage.bin ~/hikey/bin/
|
|
||||||
|
|
||||||
Get nvme.img binary
|
|
||||||
> wget -P ~/hikey/bin https://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey/release/nvme.img
|
|
||||||
|
|
||||||
Compile U-Boot
|
|
||||||
==============
|
|
||||||
|
|
||||||
> cd ~/hikey/src/u-boot
|
|
||||||
> make CROSS_COMPILE=aarch64-linux-gnu- hikey_config
|
|
||||||
> make CROSS_COMPILE=aarch64-linux-gnu-
|
|
||||||
> cp u-boot.bin ~/hikey/bin
|
|
||||||
|
|
||||||
Compile ARM Trusted Firmware (ATF)
|
|
||||||
==================================
|
|
||||||
|
|
||||||
> cd ~/hikey/src/arm-trusted-firmware
|
|
||||||
> make CROSS_COMPILE=aarch64-linux-gnu- all fip \
|
|
||||||
SCP_BL2=~/hikey/bin/mcuimage.bin \
|
|
||||||
BL33=~/hikey/bin/u-boot.bin DEBUG=1 PLAT=hikey
|
|
||||||
|
|
||||||
Copy the resulting FIP binary
|
|
||||||
> cp build/hikey/debug/fip.bin ~/hikey/bin
|
|
||||||
|
|
||||||
Compile ATF Fastboot
|
|
||||||
====================
|
|
||||||
|
|
||||||
> cd ~/hikey/src/atf-fastboot
|
|
||||||
> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=hikey DEBUG=1
|
|
||||||
|
|
||||||
Compile l-loader
|
|
||||||
================
|
|
||||||
> cd ~/hikey/src/l-loader
|
|
||||||
> ln -sf ~/hikey/src/arm-trusted-firmware/build/hikey/debug/bl1.bin
|
|
||||||
> ln -sf ~/hikey/src/arm-trusted-firmware/build/hikey/debug/bl2.bin
|
|
||||||
> ln -sf ~/hikey/src/atf-fastboot/build/hikey/debug/bl1.bin fastboot.bin
|
|
||||||
> make hikey PTABLE_LST=aosp-8g
|
|
||||||
|
|
||||||
Copy the resulting binaries
|
|
||||||
> cp *.img ~/hikey/bin
|
|
||||||
> cp l-loader.bin ~/hikey/bin
|
|
||||||
> cp recovery.bin ~/hikey/bin
|
|
||||||
|
|
||||||
These instructions are adapted from
|
|
||||||
https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/hikey.rst
|
|
||||||
|
|
||||||
FLASHING
|
|
||||||
========
|
|
||||||
|
|
||||||
1. Connect the second jumper on J15 BOOT SEL, to go into recovery mode and flash l-loader.bin with
|
|
||||||
the hisi-idt.py utility. Then connect a USB A to B mini cable from your PC to the USB OTG port of HiKey and execute the below command.
|
|
||||||
|
|
||||||
The command below assumes HiKey enumerated as the first USB serial port
|
|
||||||
|
|
||||||
> sudo python ~/hikey/src/hisi-idt.py -d /dev/ttyUSB0 --img1 ~/hikey/bin/recovery.bin
|
|
||||||
|
|
||||||
2. Once LED 0 comes on solid, HiKey board should be detected as a fastboot device.
|
|
||||||
|
|
||||||
> sudo fastboot devices
|
|
||||||
|
|
||||||
0123456789ABCDEF fastboot
|
|
||||||
|
|
||||||
3. Flash the images
|
|
||||||
|
|
||||||
> sudo fastboot flash ptable ~/hikey/bin/prm_ptable.img
|
|
||||||
> sudo fastboot flash loader ~/hikey/bin/l-loader.bin
|
|
||||||
> sudo fastboot flash fastboot ~/hikey/bin/fip.bin
|
|
||||||
> sudo fastboot flash nvme ~/hikey/bin/nvme.img
|
|
||||||
|
|
||||||
4. Disconnect second jumper on J15 BOOT SEL, and reset the board and you will now (hopefully)
|
|
||||||
have ATF, booting u-boot from eMMC.
|
|
||||||
|
|
||||||
Note: To get USB host working, also disconnect the USB OTG cable used for flashing. Otherwise you
|
|
||||||
will get 'dwc_otg_core_host_init: Timeout!' errors.
|
|
||||||
|
|
||||||
See working boot trace below on UART3 available at Low Speed Expansion header: -
|
|
||||||
|
|
||||||
NOTICE: BL2: v1.5(debug):v1.5-694-g6d4f6aea
|
|
||||||
NOTICE: BL2: Built : 09:21:42, Aug 29 2018
|
|
||||||
INFO: BL2: Doing platform setup
|
|
||||||
INFO: ddr3 rank1 init pass
|
|
||||||
INFO: succeed to set ddrc 150mhz
|
|
||||||
INFO: ddr3 rank1 init pass
|
|
||||||
INFO: succeed to set ddrc 266mhz
|
|
||||||
INFO: ddr3 rank1 init pass
|
|
||||||
INFO: succeed to set ddrc 400mhz
|
|
||||||
INFO: ddr3 rank1 init pass
|
|
||||||
INFO: succeed to set ddrc 533mhz
|
|
||||||
INFO: ddr3 rank1 init pass
|
|
||||||
INFO: succeed to set ddrc 800mhz
|
|
||||||
INFO: Samsung DDR
|
|
||||||
INFO: ddr test value:0xa5a55a5a
|
|
||||||
INFO: BL2: TrustZone: protecting 16777216 bytes of memory at 0x3f000000
|
|
||||||
INFO: BL2: TrustZone: protecting 4194304 bytes of memory at 0x3e800000
|
|
||||||
INFO: [BDID] [fff91c18] midr: 0x410fd033
|
|
||||||
INFO: init_acpu_dvfs: pmic version 17
|
|
||||||
INFO: init_acpu_dvfs: ACPU_CHIP_MAX_FREQ=0x186a00.
|
|
||||||
INFO: acpu_dvfs_volt_init: success!
|
|
||||||
INFO: acpu_dvfs_set_freq: support freq num is 5
|
|
||||||
INFO: acpu_dvfs_set_freq: start prof is 0x4
|
|
||||||
INFO: acpu_dvfs_set_freq: magic is 0x5a5ac5c5
|
|
||||||
INFO: acpu_dvfs_set_freq: voltage:
|
|
||||||
INFO: - 0: 0x49
|
|
||||||
INFO: - 1: 0x49
|
|
||||||
INFO: - 2: 0x50
|
|
||||||
INFO: - 3: 0x60
|
|
||||||
INFO: - 4: 0x78
|
|
||||||
NOTICE: acpu_dvfs_set_freq: set acpu freq success!INFO: BL2: Loading image id 2
|
|
||||||
INFO: Loading image id=2 at address 0x1000000
|
|
||||||
INFO: Image id=2 loaded: 0x1000000 - 0x1023d00
|
|
||||||
INFO: hisi_mcu_load_image: mcu sections 0:
|
|
||||||
INFO: hisi_mcu_load_image: src = 0x1000200
|
|
||||||
INFO: hisi_mcu_load_image: dst = 0xf6000000
|
|
||||||
INFO: hisi_mcu_load_image: size = 31184
|
|
||||||
INFO: hisi_mcu_load_image: [SRC 0x1000200] 0x8000 0x3701 0x7695 0x7689
|
|
||||||
INFO: hisi_mcu_load_image: [DST 0xf6000000] 0x8000 0x3701 0x7695 0x7689
|
|
||||||
INFO: hisi_mcu_load_image: mcu sections 1:
|
|
||||||
INFO: hisi_mcu_load_image: src = 0x1007bd0
|
|
||||||
INFO: hisi_mcu_load_image: dst = 0x5e00000
|
|
||||||
INFO: hisi_mcu_load_image: size = 93828
|
|
||||||
INFO: hisi_mcu_load_image: [SRC 0x1007bd0] 0xf000b510 0x2103fb3d 0xf0004604 0xf003fb57
|
|
||||||
INFO: hisi_mcu_load_image: [DST 0x5e00000] 0xf000b510 0x2103fb3d 0xf0004604 0xf003fb57
|
|
||||||
INFO: hisi_mcu_load_image: mcu sections 2:
|
|
||||||
INFO: hisi_mcu_load_image: src = 0x101ea54
|
|
||||||
INFO: hisi_mcu_load_image: dst = 0x5e16e84
|
|
||||||
INFO: hisi_mcu_load_image: size = 15428
|
|
||||||
INFO: hisi_mcu_load_image: [SRC 0x101ea54] 0x9 0x1020640 0x10001 0x8f0d180
|
|
||||||
INFO: hisi_mcu_load_image: [DST 0x5e16e84] 0x9 0x1020640 0x10001 0x8f0d180
|
|
||||||
INFO: hisi_mcu_load_image: mcu sections 3:
|
|
||||||
INFO: hisi_mcu_load_image: src = 0x1022698
|
|
||||||
INFO: hisi_mcu_load_image: dst = 0x5e22a10
|
|
||||||
INFO: hisi_mcu_load_image: size = 3060
|
|
||||||
INFO: hisi_mcu_load_image: [SRC 0x1022698] 0x0 0x0 0x0 0x0
|
|
||||||
INFO: hisi_mcu_load_image: [DST 0x5e22a10] 0x0 0x0 0x0 0x0
|
|
||||||
INFO: hisi_mcu_load_image: mcu sections 4:
|
|
||||||
INFO: hisi_mcu_load_image: src = 0x102328c
|
|
||||||
INFO: hisi_mcu_load_image: dst = 0x5e23604
|
|
||||||
INFO: hisi_mcu_load_image: size = 2616
|
|
||||||
INFO: hisi_mcu_load_image: [SRC 0x102328c] 0xf80000a0 0x0 0xf80000ac 0x0
|
|
||||||
INFO: hisi_mcu_load_image: [DST 0x5e23604] 0xf80000a0 0x0 0xf80000ac 0x0
|
|
||||||
INFO: hisi_mcu_start_run: AO_SC_SYS_CTRL2=0
|
|
||||||
INFO: plat_hikey_bl2_handle_scp_bl2: MCU PC is at 0x42933301
|
|
||||||
INFO: plat_hikey_bl2_handle_scp_bl2: AO_SC_PERIPH_CLKSTAT4 is 0x3b018f09
|
|
||||||
WARNING: BL2: Platform setup already done!!
|
|
||||||
INFO: BL2: Loading image id 3
|
|
||||||
INFO: Loading image id=3 at address 0xf9858000
|
|
||||||
INFO: Image id=3 loaded: 0xf9858000 - 0xf9860058
|
|
||||||
INFO: BL2: Loading image id 5
|
|
||||||
INFO: Loading image id=5 at address 0x35000000
|
|
||||||
INFO: Image id=5 loaded: 0x35000000 - 0x35061cd2
|
|
||||||
NOTICE: BL2: Booting BL31
|
|
||||||
INFO: Entry point address = 0xf9858000
|
|
||||||
INFO: SPSR = 0x3cd
|
|
||||||
NOTICE: BL31: v1.5(debug):v1.5-694-g6d4f6aea
|
|
||||||
NOTICE: BL31: Built : 09:21:44, Aug 29 2018
|
|
||||||
WARNING: Using deprecated integer interrupt array in gicv2_driver_data_t
|
|
||||||
WARNING: Please migrate to using an interrupt_prop_t array
|
|
||||||
INFO: ARM GICv2 driver initialized
|
|
||||||
INFO: BL31: Initializing runtime services
|
|
||||||
INFO: BL31: cortex_a53: CPU workaround for disable_non_temporal_hint was applied
|
|
||||||
INFO: BL31: cortex_a53: CPU workaround for 843419 was applied
|
|
||||||
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
|
|
||||||
INFO: BL31: Preparing for EL3 exit to normal world
|
|
||||||
INFO: Entry point address = 0x35000000
|
|
||||||
INFO: SPSR = 0x3c9
|
|
||||||
|
|
||||||
|
|
||||||
U-Boot 2018.09-rc1 (Aug 22 2018 - 14:55:49 +0530)hikey
|
|
||||||
|
|
||||||
DRAM: 990 MiB
|
|
||||||
HI6553 PMIC init
|
|
||||||
MMC: config_sd_carddetect: SD card present
|
|
||||||
Hisilicon DWMMC: 0, Hisilicon DWMMC: 1
|
|
||||||
Loading Environment from FAT... Unable to use mmc 1:1... Failed (-5)
|
|
||||||
In: uart@f7113000
|
|
||||||
Out: uart@f7113000
|
|
||||||
Err: uart@f7113000
|
|
||||||
Net: Net Initialization Skipped
|
|
||||||
No ethernet found.
|
|
||||||
Hit any key to stop autoboot: 0
|
|
||||||
starting USB...
|
|
||||||
USB0: scanning bus 0 for devices... 2 USB Device(s) found
|
|
||||||
scanning usb for storage devices... 0 Storage Device(s) found
|
|
||||||
scanning usb for ethernet devices... 0 Ethernet Device(s) found
|
|
||||||
|
|
@ -2,5 +2,6 @@ HIKEY960 BOARD
|
||||||
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||||
S: Maintained
|
S: Maintained
|
||||||
F: board/hisilicon/hikey960
|
F: board/hisilicon/hikey960
|
||||||
|
F: doc/board/hisilicon/hikey960.rst
|
||||||
F: include/configs/hikey960.h
|
F: include/configs/hikey960.h
|
||||||
F: configs/hikey960_defconfig
|
F: configs/hikey960_defconfig
|
||||||
|
|
|
||||||
|
|
@ -1,247 +0,0 @@
|
||||||
Introduction
|
|
||||||
============
|
|
||||||
|
|
||||||
HiKey960 is one of the 96Boards Consumer Edition board from HiSilicon.
|
|
||||||
The board/SoC has: -
|
|
||||||
* HiSilicon Kirin960 (HI3660) SoC with 4xCortex-A73 and 4xCortex-A53
|
|
||||||
* ARM Mali G71 MP8 GPU
|
|
||||||
* 3GB LPDDR4 SDRAM
|
|
||||||
* 32GB UFS Flash Storage
|
|
||||||
* microSD
|
|
||||||
* 802.11a/b/g/n WiFi, Bluetooth
|
|
||||||
|
|
||||||
More information about this board can be found in 96Boards website:
|
|
||||||
https://www.96boards.org/product/hikey960/
|
|
||||||
|
|
||||||
Currently the u-boot port supports: -
|
|
||||||
* SD card
|
|
||||||
|
|
||||||
Compile from source
|
|
||||||
===================
|
|
||||||
|
|
||||||
First get all the sources
|
|
||||||
|
|
||||||
> mkdir -p ~/hikey960/src ~/hikey960/bin
|
|
||||||
> cd ~/hikey960/src
|
|
||||||
> git clone https://github.com/ARM-software/arm-trusted-firmware
|
|
||||||
> git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4
|
|
||||||
> git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2
|
|
||||||
> wget http://snapshots.linaro.org/reference-platform/components/uefi-staging/123/hikey960/release/config
|
|
||||||
> wget http://snapshots.linaro.org/reference-platform/components/uefi-staging/123/hikey960/release/hisi-sec_usb_xloader.img
|
|
||||||
> wget http://snapshots.linaro.org/reference-platform/components/uefi-staging/123/hikey960/release/hisi-sec_uce_boot.img
|
|
||||||
> wget http://snapshots.linaro.org/reference-platform/components/uefi-staging/123/hikey960/release/hisi-sec_xloader.img
|
|
||||||
> wget http://snapshots.linaro.org/reference-platform/components/uefi-staging/123/hikey960/release/recovery.bin
|
|
||||||
> wget http://snapshots.linaro.org/reference-platform/components/uefi-staging/123/hikey960/release/hikey_idt
|
|
||||||
|
|
||||||
Get the SCP_BL2 lpm3.img binary. It is shipped as part of the UEFI source.
|
|
||||||
The latest version can be obtained from the OpenPlatformPkg repo.
|
|
||||||
|
|
||||||
> cp OpenPlatformPkg/Platforms/Hisilicon/HiKey960/Binary/lpm3.img ~/hikey960/bin/
|
|
||||||
|
|
||||||
Compile U-Boot
|
|
||||||
==============
|
|
||||||
|
|
||||||
> cd ~/hikey960/src/u-boot
|
|
||||||
> make CROSS_COMPILE=aarch64-linux-gnu- hikey960_defconfig
|
|
||||||
> make CROSS_COMPILE=aarch64-linux-gnu-
|
|
||||||
> cp u-boot.bin ~/hikey960/bin/
|
|
||||||
|
|
||||||
Compile ARM Trusted Firmware (ATF)
|
|
||||||
==================================
|
|
||||||
|
|
||||||
> cd ~/hikey960/src/arm-trusted-firmware
|
|
||||||
> make CROSS_COMPILE=aarch64-linux-gnu- all fip \
|
|
||||||
SCP_BL2=~/hikey960/bin/lpm3.img \
|
|
||||||
BL33=~/hikey960/bin/u-boot.bin DEBUG=1 PLAT=hikey960
|
|
||||||
|
|
||||||
Copy the resulting FIP binary
|
|
||||||
> cp build/hikey960/debug/fip.bin ~/hikey960/bin
|
|
||||||
|
|
||||||
Compile l-loader
|
|
||||||
================
|
|
||||||
> cd ~/hikey960/src/l-loader
|
|
||||||
> ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl1.bin
|
|
||||||
> ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl2.bin
|
|
||||||
> ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/fip.bin
|
|
||||||
> ln -sf ~/hikey960/bin/u-boot.bin
|
|
||||||
> make hikey960 PTABLE_LST=linux-32g NS_BL1U=u-boot.bin
|
|
||||||
|
|
||||||
Copy the resulting binaries
|
|
||||||
> cp *.img ~/hikey960/bin
|
|
||||||
> cp l-loader.bin ~/hikey960/bin
|
|
||||||
|
|
||||||
These instructions are adapted from
|
|
||||||
https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/hikey960.rst
|
|
||||||
|
|
||||||
Setup Console
|
|
||||||
=============
|
|
||||||
|
|
||||||
Install ser2net. Use telnet as the console since UEFI in recovery mode
|
|
||||||
output window fails to display in minicom.
|
|
||||||
|
|
||||||
> sudo apt-get install ser2net
|
|
||||||
|
|
||||||
Configure ser2net
|
|
||||||
|
|
||||||
> sudo vi /etc/ser2net.conf
|
|
||||||
|
|
||||||
Append one line for serial-over-USB in #ser2net.conf
|
|
||||||
|
|
||||||
> 2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner
|
|
||||||
|
|
||||||
Start ser2net
|
|
||||||
|
|
||||||
> sudo killall ser2net
|
|
||||||
> sudo ser2net -u
|
|
||||||
|
|
||||||
Open the console.
|
|
||||||
|
|
||||||
> telnet localhost 2004
|
|
||||||
|
|
||||||
And you could open the console remotely, too.
|
|
||||||
|
|
||||||
Flashing
|
|
||||||
========
|
|
||||||
|
|
||||||
1. Boot Hikey960 into recovery mode as per the below document:
|
|
||||||
https://github.com/96boards/documentation/blob/master/consumer/hikey/hikey960/installation/board-recovery.md
|
|
||||||
|
|
||||||
Once Hikey960 is in recovery mode, flash the recovery binary:
|
|
||||||
|
|
||||||
> cd ~/hikey960/src
|
|
||||||
> chmod +x ./hikey_idt
|
|
||||||
> sudo ./hikey_idt -c config -p /dev/ttyUSB1
|
|
||||||
|
|
||||||
Now move to the Hikey960 console and press `f` during UEFI boot. This
|
|
||||||
will allow the board to boot into fastboot mode. Once the board is in
|
|
||||||
fastboot mode, you should see the ID of the HiKey960 board using the
|
|
||||||
following command
|
|
||||||
|
|
||||||
> sudo fastboot devices
|
|
||||||
|
|
||||||
1ED3822A018E3372 fastboot
|
|
||||||
|
|
||||||
3. Flash the images
|
|
||||||
|
|
||||||
Now, the images can be flashed using fastboot:
|
|
||||||
|
|
||||||
> sudo fastboot flash ptable ~/hikey960/bin/prm_ptable.img
|
|
||||||
> sudo fastboot flash xloader ~/hikey960/bin/hisi-sec_xloader.img
|
|
||||||
> sudo fastboot flash fastboot ~/hikey960/bin/l-loader.bin
|
|
||||||
> sudo fastboot flash fip ~/hikey960/bin/fip.bin
|
|
||||||
|
|
||||||
4. Set the "Boot Mode" switch to OFF position for normal boot mode.
|
|
||||||
Then power on HiKey960
|
|
||||||
|
|
||||||
Observe the console traces using UART6 on the Low Speed Expansion header:
|
|
||||||
|
|
||||||
NOTICE: BL2: v2.1(debug):v2.1-531-g3ee48f40
|
|
||||||
NOTICE: BL2: Built : 18:15:58, Aug 2 2019
|
|
||||||
INFO: BL2: Doing platform setup
|
|
||||||
INFO: UFS LUN0 contains 1024 blocks with 4096-byte size
|
|
||||||
INFO: UFS LUN1 contains 1024 blocks with 4096-byte size
|
|
||||||
INFO: UFS LUN2 contains 2048 blocks with 4096-byte size
|
|
||||||
INFO: UFS LUN3 contains 7805952 blocks with 4096-byte size
|
|
||||||
INFO: ufs: change power mode success
|
|
||||||
INFO: BL2: Loading image id 2
|
|
||||||
INFO: Loading image id=2 at address 0x89c80000
|
|
||||||
INFO: Image id=2 loaded: 0x89c80000 - 0x89cb5088
|
|
||||||
INFO: BL2: Initiating SCP_BL2 transfer to SCP
|
|
||||||
INFO: BL2: SCP_BL2: 0x89c80000@0x35088
|
|
||||||
INFO: BL2: SCP_BL2 HEAD:
|
|
||||||
INFO: BL2: SCP_BL2 0x7000 0x179 0x159 0x149
|
|
||||||
INFO: BL2: SCP_BL2 0x189 0x18b 0x18d 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x18f
|
|
||||||
INFO: BL2: SCP_BL2 0x191 0x0 0x193 0x195
|
|
||||||
INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
|
|
||||||
INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
|
|
||||||
INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
|
|
||||||
INFO: BL2: SCP_BL2 0x4d454355 0x43494741 0x424d554e 0x21215245
|
|
||||||
INFO: BL2: SCP_BL2 0x4a054904 0x42912000 0xf841bfbc 0xe7fa0b04
|
|
||||||
INFO: BL2: SCP_BL2 0xb88cf000 0x3b18 0x3d1c 0x6809493e
|
|
||||||
INFO: BL2: SCP_BL2 0x4613680a 0x201f102 0xf0002a04 0x600a804c
|
|
||||||
INFO: BL2: SCP_BL2 0x204f04f 0xf203fb02 0xf102440a 0x60100204
|
|
||||||
INFO: BL2: SCP_BL2 0x160f04f 0xf103fb01 0x68004834 0x61044408
|
|
||||||
INFO: BL2: SCP_BL2 0x61866145 0xf8c061c7 0xf8c08020 0xf8c09024
|
|
||||||
INFO: BL2: SCP_BL2 0xf8c0a028 0xf3efb02c 0xf3ef8208 0x68118309
|
|
||||||
INFO: BL2: SCP_BL2 0xf1026401 0xf0110204 0xbf070f04 0x46113220
|
|
||||||
INFO: BL2: SCP_BL2 TAIL:
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x19cad151 0x19b80040 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
|
||||||
INFO: BL2: SCP_BL2 transferred to SCP
|
|
||||||
INFO: start fw loading
|
|
||||||
INFO: fw load success
|
|
||||||
WARNING: BL2: Platform setup already done!!
|
|
||||||
INFO: BL2: Loading image id 3
|
|
||||||
INFO: Loading image id=3 at address 0x1ac58000
|
|
||||||
INFO: Image id=3 loaded: 0x1ac58000 - 0x1ac63024
|
|
||||||
INFO: BL2: Loading image id 5
|
|
||||||
INFO: Loading image id=5 at address 0x1ac98000
|
|
||||||
INFO: Image id=5 loaded: 0x1ac98000 - 0x1ad0819c
|
|
||||||
NOTICE: BL2: Booting BL31
|
|
||||||
INFO: Entry point address = 0x1ac58000
|
|
||||||
INFO: SPSR = 0x3cd
|
|
||||||
NOTICE: BL31: v2.1(debug):v2.1-531-g3ee48f40
|
|
||||||
NOTICE: BL31: Built : 18:16:01, Aug 2 2019
|
|
||||||
INFO: ARM GICv2 driver initialized
|
|
||||||
INFO: BL31: Initializing runtime services
|
|
||||||
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
|
|
||||||
INFO: plat_setup_psci_ops: sec_entrypoint=0x1ac580fc
|
|
||||||
INFO: BL31: Preparing for EL3 exit to normal world
|
|
||||||
INFO: Entry point address = 0x1ac98000
|
|
||||||
INFO: SPSR = 0x3c9
|
|
||||||
|
|
||||||
|
|
||||||
U-Boot 2019.07-00628-g286f05a6fc-dirty (Aug 02 2019 - 17:14:05 +0530)
|
|
||||||
Hikey960
|
|
||||||
|
|
||||||
DRAM: 3 GiB
|
|
||||||
PSCI: v1.1
|
|
||||||
MMC: dwmmc1@ff37f000: 0
|
|
||||||
Loading Environment from EXT4... ** File not found /uboot.env **
|
|
||||||
|
|
||||||
** Unable to read "/uboot.env" from mmc0:2 **
|
|
||||||
In: serial@fff32000
|
|
||||||
Out: serial@fff32000
|
|
||||||
Err: serial@fff32000
|
|
||||||
Net: Net Initialization Skipped
|
|
||||||
No ethernet found.
|
|
||||||
Hit any key to stop autoboot: 0
|
|
||||||
switch to partitions #0, OK
|
|
||||||
mmc0 is current device
|
|
||||||
Scanning mmc 0:1...
|
|
||||||
Found /extlinux/extlinux.conf
|
|
||||||
Retrieving file: /extlinux/extlinux.conf
|
|
||||||
201 bytes read in 12 ms (15.6 KiB/s)
|
|
||||||
1: hikey960-kernel
|
|
||||||
Retrieving file: /Image
|
|
||||||
24689152 bytes read in 4377 ms (5.4 MiB/s)
|
|
||||||
append: earlycon=pl011,mmio32,0xfff32000 console=ttyAMA6,115200 rw root=/dev/mmcblk0p2 rot
|
|
||||||
Retrieving file: /hi3660-hikey960.dtb
|
|
||||||
35047 bytes read in 14 ms (2.4 MiB/s)
|
|
||||||
## Flattened Device Tree blob at 10000000
|
|
||||||
Booting using the fdt blob at 0x10000000
|
|
||||||
Using Device Tree in place at 0000000010000000, end 000000001000b8e6
|
|
||||||
|
|
||||||
Starting kernel ...
|
|
||||||
|
|
||||||
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
|
|
||||||
[ 0.000000] Linux version 5.2.0-03138-gd75da80dce39 (mani@Mani-XPS-13-9360) (gcc versi9
|
|
||||||
[ 0.000000] Machine model: HiKey960
|
|
||||||
[ 0.000000] earlycon: pl11 at MMIO32 0x00000000fff32000 (options '')
|
|
||||||
[ 0.000000] printk: bootconsole [pl11] enabled
|
|
||||||
[ 0.000000] efi: Getting EFI parameters from FDT:
|
|
||||||
|
|
@ -3,5 +3,6 @@ M: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>
|
||||||
M: Shawn Guo <shawn.guo@linaro.org>
|
M: Shawn Guo <shawn.guo@linaro.org>
|
||||||
S: Maintained
|
S: Maintained
|
||||||
F: board/hisilicon/poplar
|
F: board/hisilicon/poplar
|
||||||
|
F: doc/board/hisilicon/poplar.rst
|
||||||
F: include/configs/poplar.h
|
F: include/configs/poplar.h
|
||||||
F: configs/poplar_defconfig
|
F: configs/poplar_defconfig
|
||||||
|
|
|
||||||
|
|
@ -1,288 +0,0 @@
|
||||||
================================================================================
|
|
||||||
Board Information
|
|
||||||
================================================================================
|
|
||||||
|
|
||||||
Developed by HiSilicon, the board features the Hi3798C V200 with an
|
|
||||||
integrated quad-core 64-bit ARM Cortex A53 processor and high
|
|
||||||
performance Mali T720 GPU, making it capable of running any commercial
|
|
||||||
set-top solution based on Linux or Android. Its high performance
|
|
||||||
specification also supports a premium user experience with up to H.265
|
|
||||||
HEVC decoding of 4K video at 60 frames per second.
|
|
||||||
|
|
||||||
SOC Hisilicon Hi3798CV200
|
|
||||||
CPU Quad-core ARM Cortex-A53 64 bit
|
|
||||||
DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB
|
|
||||||
USB Two USB 2.0 ports One USB 3.0 ports
|
|
||||||
CONSOLE USB-micro port for console support
|
|
||||||
ETHERNET 1 GBe Ethernet
|
|
||||||
PCIE One PCIe 2.0 interfaces
|
|
||||||
JTAG 8-Pin JTAG
|
|
||||||
EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot
|
|
||||||
DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor
|
|
||||||
WIFI 802.11AC 2*2 with Bluetooth
|
|
||||||
CONNECTORS One connector for Smart Card One connector for TSI
|
|
||||||
|
|
||||||
|
|
||||||
================================================================================
|
|
||||||
BUILD INSTRUCTIONS
|
|
||||||
================================================================================
|
|
||||||
|
|
||||||
Note of warning:
|
|
||||||
================
|
|
||||||
|
|
||||||
U-Boot has a *strong* dependency with the l-loader and the arm trusted firmware
|
|
||||||
repositories.
|
|
||||||
|
|
||||||
The boot sequence is:
|
|
||||||
l-loader --> arm_trusted_firmware --> u-boot
|
|
||||||
|
|
||||||
U-Boot needs to be aware of the BL31 runtime location and size to avoid writing
|
|
||||||
over it. Currently, BL31 is being placed below the kernel text offset (check
|
|
||||||
poplar.c) but this could change in the future.
|
|
||||||
|
|
||||||
The current version of u-boot has been tested with:
|
|
||||||
- https://github.com/Linaro/poplar-l-loader.git
|
|
||||||
|
|
||||||
commit f0988698dcc5c08bd0a8f50aa0457e138a5f438c
|
|
||||||
Author: Alex Elder <elder@linaro.org>
|
|
||||||
Date: Fri Jun 16 08:57:59 2017 -0500
|
|
||||||
|
|
||||||
l-loader: use external memory region definitions
|
|
||||||
|
|
||||||
The ARM Trusted Firmware code now has a header file that collects
|
|
||||||
all the definitions for the memory regions used for its boot stages.
|
|
||||||
Include that file where needed, and use the definitions found therein
|
|
||||||
|
|
||||||
Signed-off-by: Alex Elder <elder@linaro.org>
|
|
||||||
|
|
||||||
|
|
||||||
- https://github.com/Linaro/poplar-arm-trusted-firmware.git
|
|
||||||
|
|
||||||
commit 6ac42dd3be13c99aa8ce29a15073e2f19d935f68
|
|
||||||
Author: Alex Elder <elder@linaro.org>
|
|
||||||
Date: Fri Jun 16 09:24:50 2017 -0500
|
|
||||||
|
|
||||||
poplar: define memory regions in a separate file
|
|
||||||
|
|
||||||
Separate the definitions for memory regions used for the BL stage
|
|
||||||
images and FIP into a new file. The "l-loader" image uses knowledge
|
|
||||||
of the sizes and locations of these memory regions, and it can now
|
|
||||||
include this (external) header to get these definitions, rather than
|
|
||||||
having to make coordinated changes to both code bases.
|
|
||||||
|
|
||||||
The new file has a complete set of definitions (more than may be
|
|
||||||
required by one or the other user). It also includes a summary of
|
|
||||||
how the boot process works, and how it uses these regions.
|
|
||||||
|
|
||||||
It should now be relatively easy to adjust the sizes and locations
|
|
||||||
of these memory regions, or to add to them (e.g. for TEE).
|
|
||||||
|
|
||||||
Signed-off-by: Alex Elder <elder@linaro.org>
|
|
||||||
|
|
||||||
|
|
||||||
Compile from source:
|
|
||||||
====================
|
|
||||||
|
|
||||||
Get all the sources
|
|
||||||
|
|
||||||
> mkdir -p ~/poplar/src ~/poplar/bin
|
|
||||||
> cd ~/poplar/src
|
|
||||||
> git clone https://github.com/Linaro/poplar-l-loader.git l-loader
|
|
||||||
> git clone https://github.com/Linaro/poplar-arm-trusted-firmware.git atf
|
|
||||||
> git clone https://github.com/Linaro/poplar-u-boot.git u-boot
|
|
||||||
|
|
||||||
Make sure you are using the correct branch on each one of these repositories.
|
|
||||||
The definition of "correct" might change over time (at this moment in time this
|
|
||||||
would be the "latest" branch).
|
|
||||||
|
|
||||||
Compile U-Boot:
|
|
||||||
===============
|
|
||||||
|
|
||||||
Prerequisite:
|
|
||||||
# sudo apt-get install device-tree-compiler
|
|
||||||
|
|
||||||
> cd ~/poplar/src/u-boot
|
|
||||||
> make CROSS_COMPILE=aarch64-linux-gnu- poplar_defconfig
|
|
||||||
> make CROSS_COMPILE=aarch64-linux-gnu-
|
|
||||||
> cp u-boot.bin ~/poplar/bin
|
|
||||||
|
|
||||||
Compile ARM Trusted Firmware (ATF):
|
|
||||||
===================================
|
|
||||||
|
|
||||||
> cd ~/poplar/src/atf
|
|
||||||
> make CROSS_COMPILE=aarch64-linux-gnu- all fip \
|
|
||||||
SPD=none BL33=~/poplar/bin/u-boot.bin DEBUG=1 PLAT=poplar
|
|
||||||
|
|
||||||
Copy resulting binaries
|
|
||||||
> cp build/hi3798cv200/debug/bl1.bin ~/poplar/src/l-loader/atf/
|
|
||||||
> cp build/hi3798cv200/debug/fip.bin ~/poplar/src/l-loader/atf/
|
|
||||||
|
|
||||||
Compile l-loader:
|
|
||||||
=================
|
|
||||||
|
|
||||||
> cd ~/poplar/src/l-loader
|
|
||||||
> make clean
|
|
||||||
> make CROSS_COMPILE=arm-linux-gnueabi-
|
|
||||||
|
|
||||||
Due to BootROM requiremets, rename l-loader.bin to fastboot.bin:
|
|
||||||
> cp l-loader.bin ~/poplar/bin/fastboot.bin
|
|
||||||
|
|
||||||
|
|
||||||
================================================================================
|
|
||||||
FLASH INSTRUCTIONS
|
|
||||||
================================================================================
|
|
||||||
|
|
||||||
Two methods:
|
|
||||||
|
|
||||||
Using USB debrick support:
|
|
||||||
Copy fastboot.bin to a FAT partition on the USB drive and reboot the
|
|
||||||
poplar board while pressing S3(usb_boot).
|
|
||||||
|
|
||||||
The system will execute the new u-boot and boot into a shell which you
|
|
||||||
can then use to write to eMMC.
|
|
||||||
|
|
||||||
Using U-BOOT from shell:
|
|
||||||
1) using AXIS usb ethernet dongle and tftp
|
|
||||||
2) using FAT formated USB drive
|
|
||||||
|
|
||||||
|
|
||||||
1. TFTP (USB ethernet dongle)
|
|
||||||
=============================
|
|
||||||
|
|
||||||
Plug a USB AXIS ethernet dongle on any of the USB2 ports on the Poplar board.
|
|
||||||
Copy fastboot.bin to your tftp server.
|
|
||||||
In u-boot make sure your network is properly setup.
|
|
||||||
|
|
||||||
Then
|
|
||||||
|
|
||||||
=> tftp 0x30000000 fastboot.bin
|
|
||||||
starting USB...
|
|
||||||
USB0: USB EHCI 1.00
|
|
||||||
scanning bus 0 for devices... 1 USB Device(s) found
|
|
||||||
USB1: USB EHCI 1.00
|
|
||||||
scanning bus 1 for devices... 3 USB Device(s) found
|
|
||||||
scanning usb for storage devices... 0 Storage Device(s) found
|
|
||||||
scanning usb for ethernet devices... 1 Ethernet Device(s) found
|
|
||||||
Waiting for Ethernet connection... done.
|
|
||||||
Using asx0 device
|
|
||||||
TFTP from server 192.168.1.4; our IP address is 192.168.1.10
|
|
||||||
Filename 'poplar/fastboot.bin'.
|
|
||||||
Load address: 0x30000000
|
|
||||||
Loading: #################################################################
|
|
||||||
#################################################################
|
|
||||||
###############################################################
|
|
||||||
2 MiB/s
|
|
||||||
done
|
|
||||||
Bytes transferred = 983040 (f0000 hex)
|
|
||||||
|
|
||||||
=> mmc write 0x30000000 0 0x780
|
|
||||||
|
|
||||||
MMC write: dev # 0, block # 0, count 1920 ... 1920 blocks written: OK
|
|
||||||
=> reset
|
|
||||||
|
|
||||||
|
|
||||||
2. USING USB FAT DRIVE
|
|
||||||
=======================
|
|
||||||
|
|
||||||
Copy fastboot.bin to any partition on a FAT32 formated usb flash drive.
|
|
||||||
Enter the uboot prompt
|
|
||||||
|
|
||||||
=> fatls usb 0:2
|
|
||||||
983040 fastboot.bin
|
|
||||||
|
|
||||||
1 file(s), 0 dir(s)
|
|
||||||
|
|
||||||
=> fatload usb 0:2 0x30000000 fastboot.bin
|
|
||||||
reading fastboot.bin
|
|
||||||
983040 bytes read in 44 ms (21.3 MiB/s)
|
|
||||||
|
|
||||||
=> mmc write 0x30000000 0 0x780
|
|
||||||
|
|
||||||
MMC write: dev # 0, block # 0, count 1920 ... 1920 blocks written: OK
|
|
||||||
|
|
||||||
|
|
||||||
================================================================================
|
|
||||||
BOOT TRACE
|
|
||||||
================================================================================
|
|
||||||
|
|
||||||
Bootrom start
|
|
||||||
Boot Media: eMMC
|
|
||||||
Decrypt auxiliary code ...OK
|
|
||||||
|
|
||||||
lsadc voltage min: 000000FE, max: 000000FF, aver: 000000FE, index: 00000000
|
|
||||||
|
|
||||||
Entry boot auxiliary code
|
|
||||||
|
|
||||||
Auxiliary code - v1.00
|
|
||||||
DDR code - V1.1.2 20160205
|
|
||||||
Build: Mar 24 2016 - 17:09:44
|
|
||||||
Reg Version: v134
|
|
||||||
Reg Time: 2016/03/18 09:44:55
|
|
||||||
Reg Name: hi3798cv2dmb_hi3798cv200_ddr3_2gbyte_8bitx4_4layers.reg
|
|
||||||
|
|
||||||
Boot auxiliary code success
|
|
||||||
Bootrom success
|
|
||||||
|
|
||||||
LOADER: Switched to aarch64 mode
|
|
||||||
LOADER: Entering ARM TRUSTED FIRMWARE
|
|
||||||
LOADER: CPU0 executes at 0x000ce000
|
|
||||||
|
|
||||||
INFO: BL1: 0xe1000 - 0xe7000 [size = 24576]
|
|
||||||
NOTICE: Booting Trusted Firmware
|
|
||||||
NOTICE: BL1: v1.3(debug):v1.3-372-g1ba9c60
|
|
||||||
NOTICE: BL1: Built : 17:51:33, Apr 30 2017
|
|
||||||
INFO: BL1: RAM 0xe1000 - 0xe7000
|
|
||||||
INFO: BL1: Loading BL2
|
|
||||||
INFO: Loading image id=1 at address 0xe9000
|
|
||||||
INFO: Image id=1 loaded at address 0xe9000, size = 0x5008
|
|
||||||
NOTICE: BL1: Booting BL2
|
|
||||||
INFO: Entry point address = 0xe9000
|
|
||||||
INFO: SPSR = 0x3c5
|
|
||||||
NOTICE: BL2: v1.3(debug):v1.3-372-g1ba9c60
|
|
||||||
NOTICE: BL2: Built : 17:51:33, Apr 30 2017
|
|
||||||
INFO: BL2: Loading BL31
|
|
||||||
INFO: Loading image id=3 at address 0x129000
|
|
||||||
INFO: Image id=3 loaded at address 0x129000, size = 0x8038
|
|
||||||
INFO: BL2: Loading BL33
|
|
||||||
INFO: Loading image id=5 at address 0x37000000
|
|
||||||
INFO: Image id=5 loaded at address 0x37000000, size = 0x58f17
|
|
||||||
NOTICE: BL1: Booting BL31
|
|
||||||
INFO: Entry point address = 0x129000
|
|
||||||
INFO: SPSR = 0x3cd
|
|
||||||
INFO: Boot bl33 from 0x37000000 for 364311 Bytes
|
|
||||||
NOTICE: BL31: v1.3(debug):v1.3-372-g1ba9c60
|
|
||||||
NOTICE: BL31: Built : 17:51:33, Apr 30 2017
|
|
||||||
INFO: BL31: Initializing runtime services
|
|
||||||
INFO: BL31: Preparing for EL3 exit to normal world
|
|
||||||
INFO: Entry point address = 0x37000000
|
|
||||||
INFO: SPSR = 0x3c9
|
|
||||||
|
|
||||||
|
|
||||||
U-Boot 2017.05-rc2-00130-gd2255b0 (Apr 30 2017 - 17:51:28 +0200)poplar
|
|
||||||
|
|
||||||
Model: HiSilicon Poplar Development Board
|
|
||||||
BOARD: Hisilicon HI3798cv200 Poplar
|
|
||||||
DRAM: 1 GiB
|
|
||||||
MMC: Hisilicon DWMMC: 0
|
|
||||||
In: serial@f8b00000
|
|
||||||
Out: serial@f8b00000
|
|
||||||
Err: serial@f8b00000
|
|
||||||
Net: Net Initialization Skipped
|
|
||||||
No ethernet found.
|
|
||||||
|
|
||||||
Hit any key to stop autoboot: 0
|
|
||||||
starting USB...
|
|
||||||
USB0: USB EHCI 1.00
|
|
||||||
scanning bus 0 for devices... 1 USB Device(s) found
|
|
||||||
USB1: USB EHCI 1.00
|
|
||||||
scanning bus 1 for devices... 4 USB Device(s) found
|
|
||||||
scanning usb for storage devices... 1 Storage Device(s) found
|
|
||||||
scanning usb for ethernet devices... 1 Ethernet Device(s) found
|
|
||||||
|
|
||||||
USB device 0:
|
|
||||||
Device 0: Vendor: SanDisk Rev: 1.00 Prod: Cruzer Blade
|
|
||||||
Type: Removable Hard Disk
|
|
||||||
Capacity: 7632.0 MB = 7.4 GB (15630336 x 512)
|
|
||||||
... is now current device
|
|
||||||
Scanning usb 0:1...
|
|
||||||
=>
|
|
||||||
|
|
@ -9,7 +9,7 @@
|
||||||
* Svyatoslav Ryhel <clamor95@gmail.com>
|
* Svyatoslav Ryhel <clamor95@gmail.com>
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <common.h>
|
#include <asm/arch/tegra.h>
|
||||||
#include <asm/arch-tegra/tegra_i2c.h>
|
#include <asm/arch-tegra/tegra_i2c.h>
|
||||||
#include <linux/delay.h>
|
#include <linux/delay.h>
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -7,49 +7,12 @@
|
||||||
* Svyatoslav Ryhel <clamor95@gmail.com>
|
* Svyatoslav Ryhel <clamor95@gmail.com>
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <dm.h>
|
#include <dm.h>
|
||||||
#include <fdt_support.h>
|
#include <fdt_support.h>
|
||||||
#include <i2c.h>
|
|
||||||
#include <log.h>
|
|
||||||
#include <asm/arch/pinmux.h>
|
#include <asm/arch/pinmux.h>
|
||||||
#include <asm/arch/gp_padctrl.h>
|
|
||||||
#include <asm/arch/gpio.h>
|
|
||||||
#include <asm/gpio.h>
|
|
||||||
#include <linux/delay.h>
|
|
||||||
#include "pinmux-config-endeavoru.h"
|
#include "pinmux-config-endeavoru.h"
|
||||||
|
|
||||||
#define TPS80032_CTL1_I2C_ADDR 0x48
|
|
||||||
#define TPS80032_PHOENIX_DEV_ON 0x25
|
|
||||||
#define DEVOFF BIT(0)
|
|
||||||
#define TPS80032_LDO1_CFG_STATE 0x9E
|
|
||||||
#define TPS80032_LDO1_CFG_VOLTAGE 0x9F
|
|
||||||
|
|
||||||
#ifdef CONFIG_CMD_POWEROFF
|
|
||||||
int do_poweroff(struct cmd_tbl *cmdtp, int flag,
|
|
||||||
int argc, char *const argv[])
|
|
||||||
{
|
|
||||||
struct udevice *dev;
|
|
||||||
int ret;
|
|
||||||
|
|
||||||
ret = i2c_get_chip_for_busnum(0, TPS80032_CTL1_I2C_ADDR, 1, &dev);
|
|
||||||
if (ret) {
|
|
||||||
log_debug("cannot find PMIC I2C chip\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
ret = dm_i2c_reg_write(dev, TPS80032_PHOENIX_DEV_ON, DEVOFF);
|
|
||||||
if (ret)
|
|
||||||
return ret;
|
|
||||||
|
|
||||||
// wait some time and then print error
|
|
||||||
mdelay(5000);
|
|
||||||
|
|
||||||
printf("Failed to power off!!!\n");
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Routine: pinmux_init
|
* Routine: pinmux_init
|
||||||
* Description: Do individual peripheral pinmux configs
|
* Description: Do individual peripheral pinmux configs
|
||||||
|
|
@ -60,38 +23,6 @@ void pinmux_init(void)
|
||||||
ARRAY_SIZE(endeavoru_pinmux_common));
|
ARRAY_SIZE(endeavoru_pinmux_common));
|
||||||
}
|
}
|
||||||
|
|
||||||
#ifdef CONFIG_MMC_SDHCI_TEGRA
|
|
||||||
static void tps80032_voltage_init(void)
|
|
||||||
{
|
|
||||||
struct udevice *dev;
|
|
||||||
int ret;
|
|
||||||
|
|
||||||
ret = i2c_get_chip_for_busnum(0, TPS80032_CTL1_I2C_ADDR, 1, &dev);
|
|
||||||
if (ret)
|
|
||||||
log_debug("cannot find PMIC I2C chip\n");
|
|
||||||
|
|
||||||
/* TPS80032: LDO1_REG = 1.2v to DSI */
|
|
||||||
ret = dm_i2c_reg_write(dev, TPS80032_LDO1_CFG_VOLTAGE, 0x03);
|
|
||||||
if (ret)
|
|
||||||
log_debug("avdd_dsi_csi voltage set failed: %d\n", ret);
|
|
||||||
|
|
||||||
/* TPS80032: LDO1_REG enable */
|
|
||||||
ret = dm_i2c_reg_write(dev, TPS80032_LDO1_CFG_STATE, 0x01);
|
|
||||||
if (ret)
|
|
||||||
log_debug("avdd_dsi_csi enable failed: %d\n", ret);
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Routine: pin_mux_mmc
|
|
||||||
* Description: setup the MMC muxes, power rails, etc.
|
|
||||||
*/
|
|
||||||
void pin_mux_mmc(void)
|
|
||||||
{
|
|
||||||
/* Bring up DSI power */
|
|
||||||
tps80032_voltage_init();
|
|
||||||
}
|
|
||||||
#endif /* MMC */
|
|
||||||
|
|
||||||
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
||||||
int ft_board_setup(void *blob, struct bd_info *bd)
|
int ft_board_setup(void *blob, struct bd_info *bd)
|
||||||
{
|
{
|
||||||
|
|
|
||||||
|
|
@ -9,7 +9,7 @@
|
||||||
* Svyatoslav Ryhel <clamor95@gmail.com>
|
* Svyatoslav Ryhel <clamor95@gmail.com>
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <common.h>
|
#include <asm/arch/tegra.h>
|
||||||
#include <asm/arch-tegra/tegra_i2c.h>
|
#include <asm/arch-tegra/tegra_i2c.h>
|
||||||
#include <linux/delay.h>
|
#include <linux/delay.h>
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -7,61 +7,14 @@
|
||||||
* Svyatoslav Ryhel <clamor95@gmail.com>
|
* Svyatoslav Ryhel <clamor95@gmail.com>
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <dm.h>
|
#include <dm.h>
|
||||||
#include <fdt_support.h>
|
#include <fdt_support.h>
|
||||||
#include <i2c.h>
|
|
||||||
#include <log.h>
|
|
||||||
#include <asm/arch/pinmux.h>
|
#include <asm/arch/pinmux.h>
|
||||||
#include <asm/arch/clock.h>
|
#include <asm/arch/clock.h>
|
||||||
#include <asm/arch/gpio.h>
|
|
||||||
#include <asm/arch/tegra.h>
|
|
||||||
#include <asm/arch-tegra/fuse.h>
|
#include <asm/arch-tegra/fuse.h>
|
||||||
#include <asm/gpio.h>
|
|
||||||
#include <linux/delay.h>
|
|
||||||
#include "pinmux-config-x3.h"
|
#include "pinmux-config-x3.h"
|
||||||
|
|
||||||
#define MAX77663_I2C_ADDR 0x1C
|
|
||||||
|
|
||||||
#define MAX77663_REG_SD2 0x18
|
|
||||||
#define MAX77663_REG_LDO2 0x27
|
|
||||||
#define MAX77663_REG_LDO3 0x29
|
|
||||||
#define MAX77663_REG_LDO5 0x2D
|
|
||||||
#define MAX77663_REG_ONOFF_CFG1 0x41
|
|
||||||
#define ONOFF_PWR_OFF BIT(1)
|
|
||||||
|
|
||||||
#ifdef CONFIG_CMD_POWEROFF
|
|
||||||
int do_poweroff(struct cmd_tbl *cmdtp, int flag,
|
|
||||||
int argc, char *const argv[])
|
|
||||||
{
|
|
||||||
struct udevice *dev;
|
|
||||||
uchar data_buffer[1];
|
|
||||||
int ret;
|
|
||||||
|
|
||||||
ret = i2c_get_chip_for_busnum(0, MAX77663_I2C_ADDR, 1, &dev);
|
|
||||||
if (ret) {
|
|
||||||
log_debug("cannot find PMIC I2C chip\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
ret = dm_i2c_read(dev, MAX77663_REG_ONOFF_CFG1, data_buffer, 1);
|
|
||||||
if (ret)
|
|
||||||
return ret;
|
|
||||||
|
|
||||||
data_buffer[0] |= ONOFF_PWR_OFF;
|
|
||||||
|
|
||||||
ret = dm_i2c_write(dev, MAX77663_REG_ONOFF_CFG1, data_buffer, 1);
|
|
||||||
if (ret)
|
|
||||||
return ret;
|
|
||||||
|
|
||||||
/* wait some time and then print error */
|
|
||||||
mdelay(5000);
|
|
||||||
|
|
||||||
printf("Failed to power off!!!\n");
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Routine: pinmux_init
|
* Routine: pinmux_init
|
||||||
* Description: Do individual peripheral pinmux configs
|
* Description: Do individual peripheral pinmux configs
|
||||||
|
|
@ -82,50 +35,6 @@ void pinmux_init(void)
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
#ifdef CONFIG_MMC_SDHCI_TEGRA
|
|
||||||
static void max77663_voltage_init(void)
|
|
||||||
{
|
|
||||||
struct udevice *dev;
|
|
||||||
int ret;
|
|
||||||
|
|
||||||
ret = i2c_get_chip_for_busnum(0, MAX77663_I2C_ADDR, 1, &dev);
|
|
||||||
if (ret) {
|
|
||||||
log_debug("cannot find PMIC I2C chip\n");
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* 0x60 for 1.8v, bit7:0 = voltage */
|
|
||||||
ret = dm_i2c_reg_write(dev, MAX77663_REG_SD2, 0x60);
|
|
||||||
if (ret)
|
|
||||||
log_debug("vdd_1v8_vio set failed: %d\n", ret);
|
|
||||||
|
|
||||||
/* 0xF2 for 3.30v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
|
|
||||||
ret = dm_i2c_reg_write(dev, MAX77663_REG_LDO2, 0xF2);
|
|
||||||
if (ret)
|
|
||||||
log_debug("avdd_usb set failed: %d\n", ret);
|
|
||||||
|
|
||||||
/* 0xEC for 3.00v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
|
|
||||||
ret = dm_i2c_reg_write(dev, MAX77663_REG_LDO3, 0xEC);
|
|
||||||
if (ret)
|
|
||||||
log_debug("vdd_usd set failed: %d\n", ret);
|
|
||||||
|
|
||||||
/* 0xE9 for 2.85v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
|
|
||||||
ret = dm_i2c_reg_write(dev, MAX77663_REG_LDO5, 0xE9);
|
|
||||||
if (ret)
|
|
||||||
log_debug("vcore_emmc set failed: %d\n", ret);
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Routine: pin_mux_mmc
|
|
||||||
* Description: setup the MMC muxes, power rails, etc.
|
|
||||||
*/
|
|
||||||
void pin_mux_mmc(void)
|
|
||||||
{
|
|
||||||
/* Bring up uSD and eMMC power */
|
|
||||||
max77663_voltage_init();
|
|
||||||
}
|
|
||||||
#endif /* MMC */
|
|
||||||
|
|
||||||
int nvidia_board_init(void)
|
int nvidia_board_init(void)
|
||||||
{
|
{
|
||||||
/* Set up panel bridge clocks */
|
/* Set up panel bridge clocks */
|
||||||
|
|
|
||||||
|
|
@ -528,7 +528,10 @@ struct efi_device_path *eficonfig_create_device_path(struct efi_device_path *dp_
|
||||||
p += fp_size;
|
p += fp_size;
|
||||||
*((struct efi_device_path *)p) = END;
|
*((struct efi_device_path *)p) = END;
|
||||||
|
|
||||||
dp = efi_dp_append(dp_volume, (struct efi_device_path *)buf);
|
dp = efi_dp_shorten(dp_volume);
|
||||||
|
if (!dp)
|
||||||
|
dp = dp_volume;
|
||||||
|
dp = efi_dp_append(dp, &fp->dp);
|
||||||
free(buf);
|
free(buf);
|
||||||
|
|
||||||
return dp;
|
return dp;
|
||||||
|
|
|
||||||
|
|
@ -44,6 +44,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y
|
||||||
CONFIG_CMD_UMS_ABORT_KEYED=y
|
CONFIG_CMD_UMS_ABORT_KEYED=y
|
||||||
# CONFIG_CMD_SETEXPR is not set
|
# CONFIG_CMD_SETEXPR is not set
|
||||||
CONFIG_CMD_PAUSE=y
|
CONFIG_CMD_PAUSE=y
|
||||||
|
CONFIG_CMD_REGULATOR=y
|
||||||
CONFIG_CMD_EXT4_WRITE=y
|
CONFIG_CMD_EXT4_WRITE=y
|
||||||
# CONFIG_SPL_DOS_PARTITION is not set
|
# CONFIG_SPL_DOS_PARTITION is not set
|
||||||
# CONFIG_SPL_EFI_PARTITION is not set
|
# CONFIG_SPL_EFI_PARTITION is not set
|
||||||
|
|
@ -61,10 +62,13 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
||||||
CONFIG_SYS_I2C_TEGRA=y
|
CONFIG_SYS_I2C_TEGRA=y
|
||||||
CONFIG_BUTTON_KEYBOARD=y
|
CONFIG_BUTTON_KEYBOARD=y
|
||||||
CONFIG_DM_PMIC=y
|
CONFIG_DM_PMIC=y
|
||||||
|
CONFIG_DM_PMIC_TPS80031=y
|
||||||
CONFIG_DM_REGULATOR=y
|
CONFIG_DM_REGULATOR=y
|
||||||
CONFIG_DM_REGULATOR_FIXED=y
|
CONFIG_DM_REGULATOR_FIXED=y
|
||||||
|
CONFIG_DM_REGULATOR_TPS80031=y
|
||||||
CONFIG_PWM_TEGRA=y
|
CONFIG_PWM_TEGRA=y
|
||||||
CONFIG_SYS_NS16550=y
|
CONFIG_SYS_NS16550=y
|
||||||
|
CONFIG_SYSRESET_TPS80031=y
|
||||||
CONFIG_USB=y
|
CONFIG_USB=y
|
||||||
CONFIG_USB_EHCI_HCD=y
|
CONFIG_USB_EHCI_HCD=y
|
||||||
CONFIG_USB_EHCI_TEGRA=y
|
CONFIG_USB_EHCI_TEGRA=y
|
||||||
|
|
|
||||||
|
|
@ -43,6 +43,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y
|
||||||
CONFIG_CMD_UMS_ABORT_KEYED=y
|
CONFIG_CMD_UMS_ABORT_KEYED=y
|
||||||
# CONFIG_CMD_SETEXPR is not set
|
# CONFIG_CMD_SETEXPR is not set
|
||||||
CONFIG_CMD_PAUSE=y
|
CONFIG_CMD_PAUSE=y
|
||||||
|
CONFIG_CMD_REGULATOR=y
|
||||||
CONFIG_CMD_EXT4_WRITE=y
|
CONFIG_CMD_EXT4_WRITE=y
|
||||||
# CONFIG_SPL_DOS_PARTITION is not set
|
# CONFIG_SPL_DOS_PARTITION is not set
|
||||||
# CONFIG_SPL_EFI_PARTITION is not set
|
# CONFIG_SPL_EFI_PARTITION is not set
|
||||||
|
|
|
||||||
|
|
@ -45,6 +45,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y
|
||||||
CONFIG_CMD_UMS_ABORT_KEYED=y
|
CONFIG_CMD_UMS_ABORT_KEYED=y
|
||||||
# CONFIG_CMD_SETEXPR is not set
|
# CONFIG_CMD_SETEXPR is not set
|
||||||
CONFIG_CMD_PAUSE=y
|
CONFIG_CMD_PAUSE=y
|
||||||
|
CONFIG_CMD_REGULATOR=y
|
||||||
CONFIG_CMD_EXT4_WRITE=y
|
CONFIG_CMD_EXT4_WRITE=y
|
||||||
# CONFIG_SPL_DOS_PARTITION is not set
|
# CONFIG_SPL_DOS_PARTITION is not set
|
||||||
# CONFIG_SPL_EFI_PARTITION is not set
|
# CONFIG_SPL_EFI_PARTITION is not set
|
||||||
|
|
@ -65,10 +66,14 @@ CONFIG_I2C_MUX=y
|
||||||
CONFIG_I2C_MUX_GPIO=y
|
CONFIG_I2C_MUX_GPIO=y
|
||||||
CONFIG_BUTTON_KEYBOARD=y
|
CONFIG_BUTTON_KEYBOARD=y
|
||||||
CONFIG_DM_PMIC=y
|
CONFIG_DM_PMIC=y
|
||||||
|
CONFIG_DM_PMIC_TPS65910=y
|
||||||
CONFIG_DM_REGULATOR=y
|
CONFIG_DM_REGULATOR=y
|
||||||
CONFIG_DM_REGULATOR_FIXED=y
|
CONFIG_DM_REGULATOR_FIXED=y
|
||||||
|
CONFIG_DM_REGULATOR_TPS65911=y
|
||||||
CONFIG_PWM_TEGRA=y
|
CONFIG_PWM_TEGRA=y
|
||||||
CONFIG_SYS_NS16550=y
|
CONFIG_SYS_NS16550=y
|
||||||
|
CONFIG_TEGRA20_SLINK=y
|
||||||
|
CONFIG_SYSRESET_TPS65910=y
|
||||||
CONFIG_USB=y
|
CONFIG_USB=y
|
||||||
CONFIG_USB_EHCI_HCD=y
|
CONFIG_USB_EHCI_HCD=y
|
||||||
CONFIG_USB_EHCI_TEGRA=y
|
CONFIG_USB_EHCI_TEGRA=y
|
||||||
|
|
|
||||||
|
|
@ -45,6 +45,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y
|
||||||
CONFIG_CMD_UMS_ABORT_KEYED=y
|
CONFIG_CMD_UMS_ABORT_KEYED=y
|
||||||
# CONFIG_CMD_SETEXPR is not set
|
# CONFIG_CMD_SETEXPR is not set
|
||||||
CONFIG_CMD_PAUSE=y
|
CONFIG_CMD_PAUSE=y
|
||||||
|
CONFIG_CMD_REGULATOR=y
|
||||||
CONFIG_CMD_EXT4_WRITE=y
|
CONFIG_CMD_EXT4_WRITE=y
|
||||||
# CONFIG_SPL_DOS_PARTITION is not set
|
# CONFIG_SPL_DOS_PARTITION is not set
|
||||||
# CONFIG_SPL_EFI_PARTITION is not set
|
# CONFIG_SPL_EFI_PARTITION is not set
|
||||||
|
|
@ -64,11 +65,14 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
||||||
CONFIG_SYS_I2C_TEGRA=y
|
CONFIG_SYS_I2C_TEGRA=y
|
||||||
CONFIG_BUTTON_KEYBOARD=y
|
CONFIG_BUTTON_KEYBOARD=y
|
||||||
CONFIG_DM_PMIC=y
|
CONFIG_DM_PMIC=y
|
||||||
|
CONFIG_DM_PMIC_MAX77663=y
|
||||||
CONFIG_DM_REGULATOR=y
|
CONFIG_DM_REGULATOR=y
|
||||||
|
CONFIG_DM_REGULATOR_MAX77663=y
|
||||||
CONFIG_DM_REGULATOR_FIXED=y
|
CONFIG_DM_REGULATOR_FIXED=y
|
||||||
CONFIG_PWM_TEGRA=y
|
CONFIG_PWM_TEGRA=y
|
||||||
CONFIG_SYS_NS16550=y
|
CONFIG_SYS_NS16550=y
|
||||||
CONFIG_TEGRA20_SLINK=y
|
CONFIG_TEGRA20_SLINK=y
|
||||||
|
CONFIG_SYSRESET_MAX77663=y
|
||||||
CONFIG_USB=y
|
CONFIG_USB=y
|
||||||
CONFIG_USB_EHCI_HCD=y
|
CONFIG_USB_EHCI_HCD=y
|
||||||
CONFIG_USB_EHCI_TEGRA=y
|
CONFIG_USB_EHCI_TEGRA=y
|
||||||
|
|
|
||||||
261
doc/board/hisilicon/hikey.rst
Normal file
261
doc/board/hisilicon/hikey.rst
Normal file
|
|
@ -0,0 +1,261 @@
|
||||||
|
.. SPDX-License-Identifier: GPL-2.0-or-later
|
||||||
|
|
||||||
|
HiKey board
|
||||||
|
###########
|
||||||
|
|
||||||
|
Introduction
|
||||||
|
============
|
||||||
|
|
||||||
|
HiKey is the first certified 96Boards Consumer Edition board. The board/SoC has:
|
||||||
|
|
||||||
|
* HiSilicon Kirin 6220 eight-core ARM Cortex-A53 64-bit SoC running at 1.2GHz.
|
||||||
|
* ARM Mali 450-MP4 GPU
|
||||||
|
* 1GB 800MHz LPDDR3 DRAM
|
||||||
|
* 4GB eMMC Flash Storage
|
||||||
|
* microSD
|
||||||
|
* 802.11a/b/g/n WiFi, Bluetooth
|
||||||
|
|
||||||
|
The HiKey schematic can be found here:
|
||||||
|
https://github.com/96boards/documentation/blob/master/consumer/hikey/hikey620/hardware-docs/HiKey_schematics_LeMaker_version_Rev_A1.pdf
|
||||||
|
|
||||||
|
The SoC datasheet can be found here:
|
||||||
|
https://github.com/96boards/documentation/blob/master/consumer/hikey/hikey620/hardware-docs/Hi6220V100_Multi-Mode_Application_Processor_Function_Description.pdf
|
||||||
|
|
||||||
|
Currently the u-boot port supports:
|
||||||
|
|
||||||
|
* USB
|
||||||
|
* eMMC
|
||||||
|
* SD card
|
||||||
|
* GPIO
|
||||||
|
|
||||||
|
The HiKey U-Boot port has been tested with l-loader, booting ATF, which then
|
||||||
|
boots U-Boot as the bl33.bin executable.
|
||||||
|
|
||||||
|
Compile from source
|
||||||
|
===================
|
||||||
|
|
||||||
|
First get all the sources
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
mkdir -p ~/hikey/src ~/hikey/bin
|
||||||
|
cd ~/hikey/src
|
||||||
|
git clone https://github.com/96boards-hikey/edk2 -b testing/hikey960_v2.5
|
||||||
|
git clone https://github.com/ARM-software/arm-trusted-firmware
|
||||||
|
git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2
|
||||||
|
git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4
|
||||||
|
git clone https://github.com/96boards-hikey/atf-fastboot
|
||||||
|
wget https://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey/release/hisi-idt.py
|
||||||
|
|
||||||
|
Get the BL30 mcuimage.bin binary. It is shipped as part of the UEFI source.
|
||||||
|
The latest version can be obtained from the OpenPlatformPkg repo.
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cp OpenPlatformPkg/Platforms/Hisilicon/HiKey/Binary/mcuimage.bin ~/hikey/bin/
|
||||||
|
|
||||||
|
Get nvme.img binary
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
wget -P ~/hikey/bin https://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey/release/nvme.img
|
||||||
|
|
||||||
|
Compile U-Boot
|
||||||
|
==============
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cd ~/hikey/src/u-boot
|
||||||
|
make CROSS_COMPILE=aarch64-linux-gnu- hikey_config
|
||||||
|
make CROSS_COMPILE=aarch64-linux-gnu-
|
||||||
|
cp u-boot.bin ~/hikey/bin
|
||||||
|
|
||||||
|
Compile ARM Trusted Firmware (ATF)
|
||||||
|
==================================
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cd ~/hikey/src/arm-trusted-firmware
|
||||||
|
make CROSS_COMPILE=aarch64-linux-gnu- all fip \
|
||||||
|
SCP_BL2=~/hikey/bin/mcuimage.bin \
|
||||||
|
BL33=~/hikey/bin/u-boot.bin DEBUG=1 PLAT=hikey
|
||||||
|
|
||||||
|
Copy the resulting FIP binary
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cp build/hikey/debug/fip.bin ~/hikey/bin
|
||||||
|
|
||||||
|
Compile ATF Fastboot
|
||||||
|
====================
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cd ~/hikey/src/atf-fastboot
|
||||||
|
make CROSS_COMPILE=aarch64-linux-gnu- PLAT=hikey DEBUG=1
|
||||||
|
|
||||||
|
Compile l-loader
|
||||||
|
================
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cd ~/hikey/src/l-loader
|
||||||
|
ln -sf ~/hikey/src/arm-trusted-firmware/build/hikey/debug/bl1.bin
|
||||||
|
ln -sf ~/hikey/src/arm-trusted-firmware/build/hikey/debug/bl2.bin
|
||||||
|
ln -sf ~/hikey/src/atf-fastboot/build/hikey/debug/bl1.bin fastboot.bin
|
||||||
|
make hikey PTABLE_LST=aosp-8g
|
||||||
|
|
||||||
|
Copy the resulting binaries
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cp *.img ~/hikey/bin
|
||||||
|
cp l-loader.bin ~/hikey/bin
|
||||||
|
cp recovery.bin ~/hikey/bin
|
||||||
|
|
||||||
|
These instructions are adapted from
|
||||||
|
https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/hikey.rst
|
||||||
|
|
||||||
|
Flashing
|
||||||
|
========
|
||||||
|
|
||||||
|
1. Connect the second jumper on J15 BOOT SEL, to go into recovery mode and flash l-loader.bin with
|
||||||
|
the hisi-idt.py utility. Then connect a USB A to B mini cable from your PC to the USB OTG port of HiKey and execute the below command.
|
||||||
|
|
||||||
|
The command below assumes HiKey enumerated as the first USB serial port
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
sudo python ~/hikey/src/hisi-idt.py -d /dev/ttyUSB0 --img1 ~/hikey/bin/recovery.bin
|
||||||
|
|
||||||
|
2. Once LED 0 comes on solid, HiKey board should be detected as a fastboot device.
|
||||||
|
|
||||||
|
.. code-block::
|
||||||
|
|
||||||
|
sudo fastboot devices
|
||||||
|
|
||||||
|
0123456789ABCDEF fastboot
|
||||||
|
|
||||||
|
3. Flash the images
|
||||||
|
|
||||||
|
.. code-block::
|
||||||
|
|
||||||
|
sudo fastboot flash ptable ~/hikey/bin/prm_ptable.img
|
||||||
|
sudo fastboot flash loader ~/hikey/bin/l-loader.bin
|
||||||
|
sudo fastboot flash fastboot ~/hikey/bin/fip.bin
|
||||||
|
sudo fastboot flash nvme ~/hikey/bin/nvme.img
|
||||||
|
|
||||||
|
4. Disconnect second jumper on J15 BOOT SEL, and reset the board and you will now (hopefully)
|
||||||
|
have ATF, booting u-boot from eMMC.
|
||||||
|
|
||||||
|
Note: To get USB host working, also disconnect the USB OTG cable used for flashing. Otherwise you
|
||||||
|
will get 'dwc_otg_core_host_init: Timeout!' errors.
|
||||||
|
|
||||||
|
See working boot trace below on UART3 available at Low Speed Expansion header::
|
||||||
|
|
||||||
|
NOTICE: BL2: v1.5(debug):v1.5-694-g6d4f6aea
|
||||||
|
NOTICE: BL2: Built : 09:21:42, Aug 29 2018
|
||||||
|
INFO: BL2: Doing platform setup
|
||||||
|
INFO: ddr3 rank1 init pass
|
||||||
|
INFO: succeed to set ddrc 150mhz
|
||||||
|
INFO: ddr3 rank1 init pass
|
||||||
|
INFO: succeed to set ddrc 266mhz
|
||||||
|
INFO: ddr3 rank1 init pass
|
||||||
|
INFO: succeed to set ddrc 400mhz
|
||||||
|
INFO: ddr3 rank1 init pass
|
||||||
|
INFO: succeed to set ddrc 533mhz
|
||||||
|
INFO: ddr3 rank1 init pass
|
||||||
|
INFO: succeed to set ddrc 800mhz
|
||||||
|
INFO: Samsung DDR
|
||||||
|
INFO: ddr test value:0xa5a55a5a
|
||||||
|
INFO: BL2: TrustZone: protecting 16777216 bytes of memory at 0x3f000000
|
||||||
|
INFO: BL2: TrustZone: protecting 4194304 bytes of memory at 0x3e800000
|
||||||
|
INFO: [BDID] [fff91c18] midr: 0x410fd033
|
||||||
|
INFO: init_acpu_dvfs: pmic version 17
|
||||||
|
INFO: init_acpu_dvfs: ACPU_CHIP_MAX_FREQ=0x186a00.
|
||||||
|
INFO: acpu_dvfs_volt_init: success!
|
||||||
|
INFO: acpu_dvfs_set_freq: support freq num is 5
|
||||||
|
INFO: acpu_dvfs_set_freq: start prof is 0x4
|
||||||
|
INFO: acpu_dvfs_set_freq: magic is 0x5a5ac5c5
|
||||||
|
INFO: acpu_dvfs_set_freq: voltage:
|
||||||
|
INFO: - 0: 0x49
|
||||||
|
INFO: - 1: 0x49
|
||||||
|
INFO: - 2: 0x50
|
||||||
|
INFO: - 3: 0x60
|
||||||
|
INFO: - 4: 0x78
|
||||||
|
NOTICE: acpu_dvfs_set_freq: set acpu freq success!INFO: BL2: Loading image id 2
|
||||||
|
INFO: Loading image id=2 at address 0x1000000
|
||||||
|
INFO: Image id=2 loaded: 0x1000000 - 0x1023d00
|
||||||
|
INFO: hisi_mcu_load_image: mcu sections 0:
|
||||||
|
INFO: hisi_mcu_load_image: src = 0x1000200
|
||||||
|
INFO: hisi_mcu_load_image: dst = 0xf6000000
|
||||||
|
INFO: hisi_mcu_load_image: size = 31184
|
||||||
|
INFO: hisi_mcu_load_image: [SRC 0x1000200] 0x8000 0x3701 0x7695 0x7689
|
||||||
|
INFO: hisi_mcu_load_image: [DST 0xf6000000] 0x8000 0x3701 0x7695 0x7689
|
||||||
|
INFO: hisi_mcu_load_image: mcu sections 1:
|
||||||
|
INFO: hisi_mcu_load_image: src = 0x1007bd0
|
||||||
|
INFO: hisi_mcu_load_image: dst = 0x5e00000
|
||||||
|
INFO: hisi_mcu_load_image: size = 93828
|
||||||
|
INFO: hisi_mcu_load_image: [SRC 0x1007bd0] 0xf000b510 0x2103fb3d 0xf0004604 0xf003fb57
|
||||||
|
INFO: hisi_mcu_load_image: [DST 0x5e00000] 0xf000b510 0x2103fb3d 0xf0004604 0xf003fb57
|
||||||
|
INFO: hisi_mcu_load_image: mcu sections 2:
|
||||||
|
INFO: hisi_mcu_load_image: src = 0x101ea54
|
||||||
|
INFO: hisi_mcu_load_image: dst = 0x5e16e84
|
||||||
|
INFO: hisi_mcu_load_image: size = 15428
|
||||||
|
INFO: hisi_mcu_load_image: [SRC 0x101ea54] 0x9 0x1020640 0x10001 0x8f0d180
|
||||||
|
INFO: hisi_mcu_load_image: [DST 0x5e16e84] 0x9 0x1020640 0x10001 0x8f0d180
|
||||||
|
INFO: hisi_mcu_load_image: mcu sections 3:
|
||||||
|
INFO: hisi_mcu_load_image: src = 0x1022698
|
||||||
|
INFO: hisi_mcu_load_image: dst = 0x5e22a10
|
||||||
|
INFO: hisi_mcu_load_image: size = 3060
|
||||||
|
INFO: hisi_mcu_load_image: [SRC 0x1022698] 0x0 0x0 0x0 0x0
|
||||||
|
INFO: hisi_mcu_load_image: [DST 0x5e22a10] 0x0 0x0 0x0 0x0
|
||||||
|
INFO: hisi_mcu_load_image: mcu sections 4:
|
||||||
|
INFO: hisi_mcu_load_image: src = 0x102328c
|
||||||
|
INFO: hisi_mcu_load_image: dst = 0x5e23604
|
||||||
|
INFO: hisi_mcu_load_image: size = 2616
|
||||||
|
INFO: hisi_mcu_load_image: [SRC 0x102328c] 0xf80000a0 0x0 0xf80000ac 0x0
|
||||||
|
INFO: hisi_mcu_load_image: [DST 0x5e23604] 0xf80000a0 0x0 0xf80000ac 0x0
|
||||||
|
INFO: hisi_mcu_start_run: AO_SC_SYS_CTRL2=0
|
||||||
|
INFO: plat_hikey_bl2_handle_scp_bl2: MCU PC is at 0x42933301
|
||||||
|
INFO: plat_hikey_bl2_handle_scp_bl2: AO_SC_PERIPH_CLKSTAT4 is 0x3b018f09
|
||||||
|
WARNING: BL2: Platform setup already done!!
|
||||||
|
INFO: BL2: Loading image id 3
|
||||||
|
INFO: Loading image id=3 at address 0xf9858000
|
||||||
|
INFO: Image id=3 loaded: 0xf9858000 - 0xf9860058
|
||||||
|
INFO: BL2: Loading image id 5
|
||||||
|
INFO: Loading image id=5 at address 0x35000000
|
||||||
|
INFO: Image id=5 loaded: 0x35000000 - 0x35061cd2
|
||||||
|
NOTICE: BL2: Booting BL31
|
||||||
|
INFO: Entry point address = 0xf9858000
|
||||||
|
INFO: SPSR = 0x3cd
|
||||||
|
NOTICE: BL31: v1.5(debug):v1.5-694-g6d4f6aea
|
||||||
|
NOTICE: BL31: Built : 09:21:44, Aug 29 2018
|
||||||
|
WARNING: Using deprecated integer interrupt array in gicv2_driver_data_t
|
||||||
|
WARNING: Please migrate to using an interrupt_prop_t array
|
||||||
|
INFO: ARM GICv2 driver initialized
|
||||||
|
INFO: BL31: Initializing runtime services
|
||||||
|
INFO: BL31: cortex_a53: CPU workaround for disable_non_temporal_hint was applied
|
||||||
|
INFO: BL31: cortex_a53: CPU workaround for 843419 was applied
|
||||||
|
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
|
||||||
|
INFO: BL31: Preparing for EL3 exit to normal world
|
||||||
|
INFO: Entry point address = 0x35000000
|
||||||
|
INFO: SPSR = 0x3c9
|
||||||
|
|
||||||
|
U-Boot 2018.09-rc1 (Aug 22 2018 - 14:55:49 +0530)hikey
|
||||||
|
|
||||||
|
DRAM: 990 MiB
|
||||||
|
HI6553 PMIC init
|
||||||
|
MMC: config_sd_carddetect: SD card present
|
||||||
|
Hisilicon DWMMC: 0, Hisilicon DWMMC: 1
|
||||||
|
Loading Environment from FAT... Unable to use mmc 1:1... Failed (-5)
|
||||||
|
In: uart@f7113000
|
||||||
|
Out: uart@f7113000
|
||||||
|
Err: uart@f7113000
|
||||||
|
Net: Net Initialization Skipped
|
||||||
|
No ethernet found.
|
||||||
|
Hit any key to stop autoboot: 0
|
||||||
|
starting USB...
|
||||||
|
USB0: scanning bus 0 for devices... 2 USB Device(s) found
|
||||||
|
scanning usb for storage devices... 0 Storage Device(s) found
|
||||||
|
scanning usb for ethernet devices... 0 Ethernet Device(s) found
|
||||||
284
doc/board/hisilicon/hikey960.rst
Normal file
284
doc/board/hisilicon/hikey960.rst
Normal file
|
|
@ -0,0 +1,284 @@
|
||||||
|
.. SPDX-License-Identifier: GPL-2.0-or-later
|
||||||
|
|
||||||
|
HiKey960 board
|
||||||
|
##############
|
||||||
|
|
||||||
|
Introduction
|
||||||
|
============
|
||||||
|
|
||||||
|
HiKey960 is one of the 96Boards Consumer Edition board from HiSilicon.
|
||||||
|
The board/SoC has:
|
||||||
|
|
||||||
|
* HiSilicon Kirin960 (HI3660) SoC with 4xCortex-A73 and 4xCortex-A53
|
||||||
|
* ARM Mali G71 MP8 GPU
|
||||||
|
* 3GB LPDDR4 SDRAM
|
||||||
|
* 32GB UFS Flash Storage
|
||||||
|
* microSD
|
||||||
|
* 802.11a/b/g/n WiFi, Bluetooth
|
||||||
|
|
||||||
|
More information about this board can be found in 96Boards website:
|
||||||
|
https://www.96boards.org/product/hikey960/
|
||||||
|
|
||||||
|
Currently the u-boot port supports:
|
||||||
|
|
||||||
|
* SD card
|
||||||
|
|
||||||
|
Compile from source
|
||||||
|
===================
|
||||||
|
|
||||||
|
First get all the sources
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
mkdir -p ~/hikey960/src ~/hikey960/bin
|
||||||
|
cd ~/hikey960/src
|
||||||
|
git clone https://github.com/ARM-software/arm-trusted-firmware
|
||||||
|
git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4
|
||||||
|
git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2
|
||||||
|
wget http://snapshots.linaro.org/reference-platform/components/uefi-staging/123/hikey960/release/config
|
||||||
|
wget http://snapshots.linaro.org/reference-platform/components/uefi-staging/123/hikey960/release/hisi-sec_usb_xloader.img
|
||||||
|
wget http://snapshots.linaro.org/reference-platform/components/uefi-staging/123/hikey960/release/hisi-sec_uce_boot.img
|
||||||
|
wget http://snapshots.linaro.org/reference-platform/components/uefi-staging/123/hikey960/release/hisi-sec_xloader.img
|
||||||
|
wget http://snapshots.linaro.org/reference-platform/components/uefi-staging/123/hikey960/release/recovery.bin
|
||||||
|
wget http://snapshots.linaro.org/reference-platform/components/uefi-staging/123/hikey960/release/hikey_idt
|
||||||
|
|
||||||
|
Get the SCP_BL2 lpm3.img binary. It is shipped as part of the UEFI source.
|
||||||
|
The latest version can be obtained from the OpenPlatformPkg repo.
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cp OpenPlatformPkg/Platforms/Hisilicon/HiKey960/Binary/lpm3.img ~/hikey960/bin/
|
||||||
|
|
||||||
|
Compile U-Boot
|
||||||
|
==============
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cd ~/hikey960/src/u-boot
|
||||||
|
make CROSS_COMPILE=aarch64-linux-gnu- hikey960_defconfig
|
||||||
|
make CROSS_COMPILE=aarch64-linux-gnu-
|
||||||
|
cp u-boot.bin ~/hikey960/bin/
|
||||||
|
|
||||||
|
Compile ARM Trusted Firmware (ATF)
|
||||||
|
==================================
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cd ~/hikey960/src/arm-trusted-firmware
|
||||||
|
make CROSS_COMPILE=aarch64-linux-gnu- all fip \
|
||||||
|
SCP_BL2=~/hikey960/bin/lpm3.img \
|
||||||
|
BL33=~/hikey960/bin/u-boot.bin DEBUG=1 PLAT=hikey960
|
||||||
|
|
||||||
|
Copy the resulting FIP binary
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cp build/hikey960/debug/fip.bin ~/hikey960/bin
|
||||||
|
|
||||||
|
Compile l-loader
|
||||||
|
================
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cd ~/hikey960/src/l-loader
|
||||||
|
ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl1.bin
|
||||||
|
ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl2.bin
|
||||||
|
ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/fip.bin
|
||||||
|
ln -sf ~/hikey960/bin/u-boot.bin
|
||||||
|
make hikey960 PTABLE_LST=linux-32g NS_BL1U=u-boot.bin
|
||||||
|
|
||||||
|
Copy the resulting binaries
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cp *.img ~/hikey960/bin
|
||||||
|
cp l-loader.bin ~/hikey960/bin
|
||||||
|
|
||||||
|
These instructions are adapted from
|
||||||
|
https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/hikey960.rst
|
||||||
|
|
||||||
|
Setup console
|
||||||
|
=============
|
||||||
|
|
||||||
|
Install ser2net. Use telnet as the console since UEFI in recovery mode
|
||||||
|
output window fails to display in minicom.
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
sudo apt-get install ser2net
|
||||||
|
|
||||||
|
Configure ser2net
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
sudo vi /etc/ser2net.conf
|
||||||
|
|
||||||
|
Append one line for serial-over-USB in #ser2net.conf
|
||||||
|
|
||||||
|
2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner
|
||||||
|
|
||||||
|
Start ser2net
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
sudo killall ser2net
|
||||||
|
sudo ser2net -u
|
||||||
|
|
||||||
|
Open the console.
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
telnet localhost 2004
|
||||||
|
|
||||||
|
And you could open the console remotely, too.
|
||||||
|
|
||||||
|
Flashing
|
||||||
|
========
|
||||||
|
|
||||||
|
1. Boot Hikey960 into recovery mode as per the below document:
|
||||||
|
https://github.com/96boards/documentation/blob/master/consumer/hikey/hikey960/installation/board-recovery.md
|
||||||
|
|
||||||
|
Once Hikey960 is in recovery mode, flash the recovery binary:
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cd ~/hikey960/src
|
||||||
|
chmod +x ./hikey_idt
|
||||||
|
sudo ./hikey_idt -c config -p /dev/ttyUSB1
|
||||||
|
|
||||||
|
Now move to the Hikey960 console and press `f` during UEFI boot. This
|
||||||
|
will allow the board to boot into fastboot mode. Once the board is in
|
||||||
|
fastboot mode, you should see the ID of the HiKey960 board using the
|
||||||
|
following command
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
sudo fastboot devices
|
||||||
|
|
||||||
|
1ED3822A018E3372 fastboot
|
||||||
|
|
||||||
|
3. Flash the images
|
||||||
|
|
||||||
|
Now, the images can be flashed using fastboot:
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
sudo fastboot flash ptable ~/hikey960/bin/prm_ptable.img
|
||||||
|
sudo fastboot flash xloader ~/hikey960/bin/hisi-sec_xloader.img
|
||||||
|
sudo fastboot flash fastboot ~/hikey960/bin/l-loader.bin
|
||||||
|
sudo fastboot flash fip ~/hikey960/bin/fip.bin
|
||||||
|
|
||||||
|
4. Set the "Boot Mode" switch to OFF position for normal boot mode.
|
||||||
|
Then power on HiKey960
|
||||||
|
|
||||||
|
Observe the console traces using UART6 on the Low Speed Expansion header::
|
||||||
|
|
||||||
|
NOTICE: BL2: v2.1(debug):v2.1-531-g3ee48f40
|
||||||
|
NOTICE: BL2: Built : 18:15:58, Aug 2 2019
|
||||||
|
INFO: BL2: Doing platform setup
|
||||||
|
INFO: UFS LUN0 contains 1024 blocks with 4096-byte size
|
||||||
|
INFO: UFS LUN1 contains 1024 blocks with 4096-byte size
|
||||||
|
INFO: UFS LUN2 contains 2048 blocks with 4096-byte size
|
||||||
|
INFO: UFS LUN3 contains 7805952 blocks with 4096-byte size
|
||||||
|
INFO: ufs: change power mode success
|
||||||
|
INFO: BL2: Loading image id 2
|
||||||
|
INFO: Loading image id=2 at address 0x89c80000
|
||||||
|
INFO: Image id=2 loaded: 0x89c80000 - 0x89cb5088
|
||||||
|
INFO: BL2: Initiating SCP_BL2 transfer to SCP
|
||||||
|
INFO: BL2: SCP_BL2: 0x89c80000@0x35088
|
||||||
|
INFO: BL2: SCP_BL2 HEAD:
|
||||||
|
INFO: BL2: SCP_BL2 0x7000 0x179 0x159 0x149
|
||||||
|
INFO: BL2: SCP_BL2 0x189 0x18b 0x18d 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x18f
|
||||||
|
INFO: BL2: SCP_BL2 0x191 0x0 0x193 0x195
|
||||||
|
INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
|
||||||
|
INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
|
||||||
|
INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
|
||||||
|
INFO: BL2: SCP_BL2 0x4d454355 0x43494741 0x424d554e 0x21215245
|
||||||
|
INFO: BL2: SCP_BL2 0x4a054904 0x42912000 0xf841bfbc 0xe7fa0b04
|
||||||
|
INFO: BL2: SCP_BL2 0xb88cf000 0x3b18 0x3d1c 0x6809493e
|
||||||
|
INFO: BL2: SCP_BL2 0x4613680a 0x201f102 0xf0002a04 0x600a804c
|
||||||
|
INFO: BL2: SCP_BL2 0x204f04f 0xf203fb02 0xf102440a 0x60100204
|
||||||
|
INFO: BL2: SCP_BL2 0x160f04f 0xf103fb01 0x68004834 0x61044408
|
||||||
|
INFO: BL2: SCP_BL2 0x61866145 0xf8c061c7 0xf8c08020 0xf8c09024
|
||||||
|
INFO: BL2: SCP_BL2 0xf8c0a028 0xf3efb02c 0xf3ef8208 0x68118309
|
||||||
|
INFO: BL2: SCP_BL2 0xf1026401 0xf0110204 0xbf070f04 0x46113220
|
||||||
|
INFO: BL2: SCP_BL2 TAIL:
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x19cad151 0x19b80040 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||||||
|
INFO: BL2: SCP_BL2 transferred to SCP
|
||||||
|
INFO: start fw loading
|
||||||
|
INFO: fw load success
|
||||||
|
WARNING: BL2: Platform setup already done!!
|
||||||
|
INFO: BL2: Loading image id 3
|
||||||
|
INFO: Loading image id=3 at address 0x1ac58000
|
||||||
|
INFO: Image id=3 loaded: 0x1ac58000 - 0x1ac63024
|
||||||
|
INFO: BL2: Loading image id 5
|
||||||
|
INFO: Loading image id=5 at address 0x1ac98000
|
||||||
|
INFO: Image id=5 loaded: 0x1ac98000 - 0x1ad0819c
|
||||||
|
NOTICE: BL2: Booting BL31
|
||||||
|
INFO: Entry point address = 0x1ac58000
|
||||||
|
INFO: SPSR = 0x3cd
|
||||||
|
NOTICE: BL31: v2.1(debug):v2.1-531-g3ee48f40
|
||||||
|
NOTICE: BL31: Built : 18:16:01, Aug 2 2019
|
||||||
|
INFO: ARM GICv2 driver initialized
|
||||||
|
INFO: BL31: Initializing runtime services
|
||||||
|
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
|
||||||
|
INFO: plat_setup_psci_ops: sec_entrypoint=0x1ac580fc
|
||||||
|
INFO: BL31: Preparing for EL3 exit to normal world
|
||||||
|
INFO: Entry point address = 0x1ac98000
|
||||||
|
INFO: SPSR = 0x3c9
|
||||||
|
|
||||||
|
U-Boot 2019.07-00628-g286f05a6fc-dirty (Aug 02 2019 - 17:14:05 +0530)
|
||||||
|
Hikey960
|
||||||
|
|
||||||
|
DRAM: 3 GiB
|
||||||
|
PSCI: v1.1
|
||||||
|
MMC: dwmmc1@ff37f000: 0
|
||||||
|
Loading Environment from EXT4... ** File not found /uboot.env **
|
||||||
|
|
||||||
|
** Unable to read "/uboot.env" from mmc0:2 **
|
||||||
|
In: serial@fff32000
|
||||||
|
Out: serial@fff32000
|
||||||
|
Err: serial@fff32000
|
||||||
|
Net: Net Initialization Skipped
|
||||||
|
No ethernet found.
|
||||||
|
Hit any key to stop autoboot: 0
|
||||||
|
switch to partitions #0, OK
|
||||||
|
mmc0 is current device
|
||||||
|
Scanning mmc 0:1...
|
||||||
|
Found /extlinux/extlinux.conf
|
||||||
|
Retrieving file: /extlinux/extlinux.conf
|
||||||
|
201 bytes read in 12 ms (15.6 KiB/s)
|
||||||
|
1: hikey960-kernel
|
||||||
|
Retrieving file: /Image
|
||||||
|
24689152 bytes read in 4377 ms (5.4 MiB/s)
|
||||||
|
append: earlycon=pl011,mmio32,0xfff32000 console=ttyAMA6,115200 rw root=/dev/mmcblk0p2 rot
|
||||||
|
Retrieving file: /hi3660-hikey960.dtb
|
||||||
|
35047 bytes read in 14 ms (2.4 MiB/s)
|
||||||
|
## Flattened Device Tree blob at 10000000
|
||||||
|
Booting using the fdt blob at 0x10000000
|
||||||
|
Using Device Tree in place at 0000000010000000, end 000000001000b8e6
|
||||||
|
|
||||||
|
Starting kernel ...
|
||||||
|
|
||||||
|
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
|
||||||
|
[ 0.000000] Linux version 5.2.0-03138-gd75da80dce39 (mani@Mani-XPS-13-9360) (gcc versi9
|
||||||
|
[ 0.000000] Machine model: HiKey960
|
||||||
|
[ 0.000000] earlycon: pl11 at MMIO32 0x00000000fff32000 (options '')
|
||||||
|
[ 0.000000] printk: bootconsole [pl11] enabled
|
||||||
|
[ 0.000000] efi: Getting EFI parameters from FDT:
|
||||||
11
doc/board/hisilicon/index.rst
Normal file
11
doc/board/hisilicon/index.rst
Normal file
|
|
@ -0,0 +1,11 @@
|
||||||
|
.. SPDX-License-Identifier: GPL-2.0-or-later
|
||||||
|
|
||||||
|
HiSilicon
|
||||||
|
=========
|
||||||
|
|
||||||
|
.. toctree::
|
||||||
|
:maxdepth: 2
|
||||||
|
|
||||||
|
hikey
|
||||||
|
hikey960
|
||||||
|
poplar
|
||||||
302
doc/board/hisilicon/poplar.rst
Normal file
302
doc/board/hisilicon/poplar.rst
Normal file
|
|
@ -0,0 +1,302 @@
|
||||||
|
.. SPDX-License-Identifier: GPL-2.0-or-later
|
||||||
|
|
||||||
|
Poplar board
|
||||||
|
############
|
||||||
|
|
||||||
|
Board Information
|
||||||
|
=================
|
||||||
|
|
||||||
|
Developed by HiSilicon, the board features the Hi3798C V200 with an
|
||||||
|
integrated quad-core 64-bit ARM Cortex A53 processor and high
|
||||||
|
performance Mali T720 GPU, making it capable of running any commercial
|
||||||
|
set-top solution based on Linux or Android. Its high performance
|
||||||
|
specification also supports a premium user experience with up to H.265
|
||||||
|
HEVC decoding of 4K video at 60 frames per second.
|
||||||
|
|
||||||
|
* SOC Hisilicon Hi3798CV200
|
||||||
|
* CPU Quad-core ARM Cortex-A53 64 bit
|
||||||
|
* DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB
|
||||||
|
* USB Two USB 2.0 ports One USB 3.0 ports
|
||||||
|
* CONSOLE USB-micro port for console support
|
||||||
|
* ETHERNET 1 GBe Ethernet
|
||||||
|
* PCIE One PCIe 2.0 interfaces
|
||||||
|
* JTAG 8-Pin JTAG
|
||||||
|
* EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot
|
||||||
|
* DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor
|
||||||
|
* WIFI 802.11AC 2*2 with Bluetooth
|
||||||
|
* CONNECTORS One connector for Smart Card One connector for TSI
|
||||||
|
|
||||||
|
Build instructions
|
||||||
|
==================
|
||||||
|
|
||||||
|
.. note::
|
||||||
|
|
||||||
|
U-Boot has a **strong** dependency with the l-loader and the ARM trusted
|
||||||
|
firmware repositories.
|
||||||
|
|
||||||
|
The boot sequence is::
|
||||||
|
|
||||||
|
l-loader --> arm_trusted_firmware --> U-Boot
|
||||||
|
|
||||||
|
U-Boot needs to be aware of the BL31 runtime location and size to avoid writing
|
||||||
|
over it. Currently, BL31 is being placed below the kernel text offset (check
|
||||||
|
poplar.c) but this could change in the future.
|
||||||
|
|
||||||
|
The current version of U-Boot has been tested with
|
||||||
|
|
||||||
|
- https://github.com/Linaro/poplar-l-loader.git::
|
||||||
|
|
||||||
|
commit f0988698dcc5c08bd0a8f50aa0457e138a5f438c
|
||||||
|
Author: Alex Elder <elder@linaro.org>
|
||||||
|
Date: Fri Jun 16 08:57:59 2017 -0500
|
||||||
|
|
||||||
|
l-loader: use external memory region definitions
|
||||||
|
|
||||||
|
The ARM Trusted Firmware code now has a header file that collects
|
||||||
|
all the definitions for the memory regions used for its boot stages.
|
||||||
|
Include that file where needed, and use the definitions found therein
|
||||||
|
|
||||||
|
Signed-off-by: Alex Elder <elder@linaro.org>
|
||||||
|
|
||||||
|
- https://github.com/Linaro/poplar-arm-trusted-firmware.git::
|
||||||
|
|
||||||
|
commit 6ac42dd3be13c99aa8ce29a15073e2f19d935f68
|
||||||
|
Author: Alex Elder <elder@linaro.org>
|
||||||
|
Date: Fri Jun 16 09:24:50 2017 -0500
|
||||||
|
|
||||||
|
poplar: define memory regions in a separate file
|
||||||
|
|
||||||
|
Separate the definitions for memory regions used for the BL stage
|
||||||
|
images and FIP into a new file. The "l-loader" image uses knowledge
|
||||||
|
of the sizes and locations of these memory regions, and it can now
|
||||||
|
include this (external) header to get these definitions, rather than
|
||||||
|
having to make coordinated changes to both code bases.
|
||||||
|
|
||||||
|
The new file has a complete set of definitions (more than may be
|
||||||
|
required by one or the other user). It also includes a summary of
|
||||||
|
how the boot process works, and how it uses these regions.
|
||||||
|
|
||||||
|
It should now be relatively easy to adjust the sizes and locations
|
||||||
|
of these memory regions, or to add to them (e.g. for TEE).
|
||||||
|
|
||||||
|
Signed-off-by: Alex Elder <elder@linaro.org>
|
||||||
|
|
||||||
|
|
||||||
|
Compile from source
|
||||||
|
-------------------
|
||||||
|
|
||||||
|
Get all the sources
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
mkdir -p ~/poplar/src ~/poplar/bin
|
||||||
|
cd ~/poplar/src
|
||||||
|
git clone https://github.com/Linaro/poplar-l-loader.git l-loader
|
||||||
|
git clone https://github.com/Linaro/poplar-arm-trusted-firmware.git atf
|
||||||
|
git clone https://github.com/Linaro/poplar-U-Boot.git U-Boot
|
||||||
|
|
||||||
|
Make sure you are using the correct branch on each one of these repositories.
|
||||||
|
The definition of "correct" might change over time (at this moment in time this
|
||||||
|
would be the "latest" branch).
|
||||||
|
|
||||||
|
Compile U-Boot
|
||||||
|
~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
Prerequisite:
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
sudo apt-get install device-tree-compiler
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cd ~/poplar/src/U-Boot
|
||||||
|
make CROSS_COMPILE=aarch64-linux-gnu- poplar_defconfig
|
||||||
|
make CROSS_COMPILE=aarch64-linux-gnu-
|
||||||
|
cp U-Boot.bin ~/poplar/bin
|
||||||
|
|
||||||
|
Compile ARM Trusted Firmware (ATF)
|
||||||
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cd ~/poplar/src/atf
|
||||||
|
make CROSS_COMPILE=aarch64-linux-gnu- all fip \
|
||||||
|
SPD=none BL33=~/poplar/bin/U-Boot.bin DEBUG=1 PLAT=poplar
|
||||||
|
|
||||||
|
Copy resulting binaries
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cp build/hi3798cv200/debug/bl1.bin ~/poplar/src/l-loader/atf/
|
||||||
|
cp build/hi3798cv200/debug/fip.bin ~/poplar/src/l-loader/atf/
|
||||||
|
|
||||||
|
Compile l-loader
|
||||||
|
~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cd ~/poplar/src/l-loader
|
||||||
|
make clean
|
||||||
|
make CROSS_COMPILE=arm-linux-gnueabi-
|
||||||
|
|
||||||
|
Due to BootROM requiremets, rename l-loader.bin to fastboot.bin:
|
||||||
|
|
||||||
|
.. code-block:: bash
|
||||||
|
|
||||||
|
cp l-loader.bin ~/poplar/bin/fastboot.bin
|
||||||
|
|
||||||
|
Flash instructions
|
||||||
|
==================
|
||||||
|
|
||||||
|
Two methods:
|
||||||
|
|
||||||
|
Using USB debrick support
|
||||||
|
Copy fastboot.bin to a FAT partition on the USB drive and reboot the
|
||||||
|
poplar board while pressing S3(usb_boot).
|
||||||
|
|
||||||
|
The system will execute the new U-Boot and boot into a shell which you
|
||||||
|
can then use to write to eMMC.
|
||||||
|
|
||||||
|
Using U-BOOT from shell
|
||||||
|
1) using AXIS usb ethernet dongle and tftp
|
||||||
|
2) using FAT formated USB drive
|
||||||
|
|
||||||
|
Flash using TFTP (USB ethernet dongle)
|
||||||
|
--------------------------------------
|
||||||
|
|
||||||
|
Plug a USB AXIS ethernet dongle on any of the USB2 ports on the Poplar board.
|
||||||
|
Copy fastboot.bin to your tftp server.
|
||||||
|
In U-Boot make sure your network is properly setup.
|
||||||
|
|
||||||
|
Then::
|
||||||
|
|
||||||
|
=> tftp 0x30000000 fastboot.bin
|
||||||
|
starting USB...
|
||||||
|
USB0: USB EHCI 1.00
|
||||||
|
scanning bus 0 for devices... 1 USB Device(s) found
|
||||||
|
USB1: USB EHCI 1.00
|
||||||
|
scanning bus 1 for devices... 3 USB Device(s) found
|
||||||
|
scanning usb for storage devices... 0 Storage Device(s) found
|
||||||
|
scanning usb for ethernet devices... 1 Ethernet Device(s) found
|
||||||
|
Waiting for Ethernet connection... done.
|
||||||
|
Using asx0 device
|
||||||
|
TFTP from server 192.168.1.4; our IP address is 192.168.1.10
|
||||||
|
Filename 'poplar/fastboot.bin'.
|
||||||
|
Load address: 0x30000000
|
||||||
|
Loading: #################################################################
|
||||||
|
#################################################################
|
||||||
|
###############################################################
|
||||||
|
2 MiB/s
|
||||||
|
done
|
||||||
|
Bytes transferred = 983040 (f0000 hex)
|
||||||
|
|
||||||
|
=> mmc write 0x30000000 0 0x780
|
||||||
|
|
||||||
|
MMC write: dev # 0, block # 0, count 1920 ... 1920 blocks written: OK
|
||||||
|
=> reset
|
||||||
|
|
||||||
|
Flash using USB FAT drive
|
||||||
|
-------------------------
|
||||||
|
|
||||||
|
Copy fastboot.bin to any partition on a FAT32 formated usb flash drive.
|
||||||
|
Enter the uboot prompt::
|
||||||
|
|
||||||
|
=> fatls usb 0:2
|
||||||
|
983040 fastboot.bin
|
||||||
|
|
||||||
|
1 file(s), 0 dir(s)
|
||||||
|
|
||||||
|
=> fatload usb 0:2 0x30000000 fastboot.bin
|
||||||
|
reading fastboot.bin
|
||||||
|
983040 bytes read in 44 ms (21.3 MiB/s)
|
||||||
|
|
||||||
|
=> mmc write 0x30000000 0 0x780
|
||||||
|
|
||||||
|
MMC write: dev # 0, block # 0, count 1920 ... 1920 blocks written: OK
|
||||||
|
|
||||||
|
Boot trace
|
||||||
|
==========
|
||||||
|
|
||||||
|
::
|
||||||
|
|
||||||
|
Bootrom start
|
||||||
|
Boot Media: eMMC
|
||||||
|
Decrypt auxiliary code ...OK
|
||||||
|
|
||||||
|
lsadc voltage min: 000000FE, max: 000000FF, aver: 000000FE, index: 00000000
|
||||||
|
|
||||||
|
Entry boot auxiliary code
|
||||||
|
|
||||||
|
Auxiliary code - v1.00
|
||||||
|
DDR code - V1.1.2 20160205
|
||||||
|
Build: Mar 24 2016 - 17:09:44
|
||||||
|
Reg Version: v134
|
||||||
|
Reg Time: 2016/03/18 09:44:55
|
||||||
|
Reg Name: hi3798cv2dmb_hi3798cv200_ddr3_2gbyte_8bitx4_4layers.reg
|
||||||
|
|
||||||
|
Boot auxiliary code success
|
||||||
|
Bootrom success
|
||||||
|
|
||||||
|
LOADER: Switched to aarch64 mode
|
||||||
|
LOADER: Entering ARM TRUSTED FIRMWARE
|
||||||
|
LOADER: CPU0 executes at 0x000ce000
|
||||||
|
|
||||||
|
INFO: BL1: 0xe1000 - 0xe7000 [size = 24576]
|
||||||
|
NOTICE: Booting Trusted Firmware
|
||||||
|
NOTICE: BL1: v1.3(debug):v1.3-372-g1ba9c60
|
||||||
|
NOTICE: BL1: Built : 17:51:33, Apr 30 2017
|
||||||
|
INFO: BL1: RAM 0xe1000 - 0xe7000
|
||||||
|
INFO: BL1: Loading BL2
|
||||||
|
INFO: Loading image id=1 at address 0xe9000
|
||||||
|
INFO: Image id=1 loaded at address 0xe9000, size = 0x5008
|
||||||
|
NOTICE: BL1: Booting BL2
|
||||||
|
INFO: Entry point address = 0xe9000
|
||||||
|
INFO: SPSR = 0x3c5
|
||||||
|
NOTICE: BL2: v1.3(debug):v1.3-372-g1ba9c60
|
||||||
|
NOTICE: BL2: Built : 17:51:33, Apr 30 2017
|
||||||
|
INFO: BL2: Loading BL31
|
||||||
|
INFO: Loading image id=3 at address 0x129000
|
||||||
|
INFO: Image id=3 loaded at address 0x129000, size = 0x8038
|
||||||
|
INFO: BL2: Loading BL33
|
||||||
|
INFO: Loading image id=5 at address 0x37000000
|
||||||
|
INFO: Image id=5 loaded at address 0x37000000, size = 0x58f17
|
||||||
|
NOTICE: BL1: Booting BL31
|
||||||
|
INFO: Entry point address = 0x129000
|
||||||
|
INFO: SPSR = 0x3cd
|
||||||
|
INFO: Boot bl33 from 0x37000000 for 364311 Bytes
|
||||||
|
NOTICE: BL31: v1.3(debug):v1.3-372-g1ba9c60
|
||||||
|
NOTICE: BL31: Built : 17:51:33, Apr 30 2017
|
||||||
|
INFO: BL31: Initializing runtime services
|
||||||
|
INFO: BL31: Preparing for EL3 exit to normal world
|
||||||
|
INFO: Entry point address = 0x37000000
|
||||||
|
INFO: SPSR = 0x3c9
|
||||||
|
|
||||||
|
U-Boot 2017.05-rc2-00130-gd2255b0 (Apr 30 2017 - 17:51:28 +0200)poplar
|
||||||
|
|
||||||
|
Model: HiSilicon Poplar Development Board
|
||||||
|
BOARD: Hisilicon HI3798cv200 Poplar
|
||||||
|
DRAM: 1 GiB
|
||||||
|
MMC: Hisilicon DWMMC: 0
|
||||||
|
In: serial@f8b00000
|
||||||
|
Out: serial@f8b00000
|
||||||
|
Err: serial@f8b00000
|
||||||
|
Net: Net Initialization Skipped
|
||||||
|
No ethernet found.
|
||||||
|
|
||||||
|
Hit any key to stop autoboot: 0
|
||||||
|
starting USB...
|
||||||
|
USB0: USB EHCI 1.00
|
||||||
|
scanning bus 0 for devices... 1 USB Device(s) found
|
||||||
|
USB1: USB EHCI 1.00
|
||||||
|
scanning bus 1 for devices... 4 USB Device(s) found
|
||||||
|
scanning usb for storage devices... 1 Storage Device(s) found
|
||||||
|
scanning usb for ethernet devices... 1 Ethernet Device(s) found
|
||||||
|
|
||||||
|
USB device 0:
|
||||||
|
Device 0: Vendor: SanDisk Rev: 1.00 Prod: Cruzer Blade
|
||||||
|
Type: Removable Hard Disk
|
||||||
|
Capacity: 7632.0 MB = 7.4 GB (15630336 x 512)
|
||||||
|
... is now current device
|
||||||
|
Scanning usb 0:1...
|
||||||
|
=>
|
||||||
|
|
@ -27,6 +27,7 @@ Board-specific doc
|
||||||
gateworks/index
|
gateworks/index
|
||||||
google/index
|
google/index
|
||||||
highbank/index
|
highbank/index
|
||||||
|
hisilicon/index
|
||||||
htc/index
|
htc/index
|
||||||
intel/index
|
intel/index
|
||||||
kontron/index
|
kontron/index
|
||||||
|
|
|
||||||
|
|
@ -247,7 +247,7 @@ fdtfile
|
||||||
Name of the flattened device tree (FDT) file to load, e.g.
|
Name of the flattened device tree (FDT) file to load, e.g.
|
||||||
"rockchip/rk3399-rockpro64.dtb"
|
"rockchip/rk3399-rockpro64.dtb"
|
||||||
|
|
||||||
fdtaddr_addr_r
|
fdt_addr_r
|
||||||
Address at which to load the FDT, e.g. 0x01f00000
|
Address at which to load the FDT, e.g. 0x01f00000
|
||||||
|
|
||||||
fdtoverlay_addr_r (needed if overlays are used)
|
fdtoverlay_addr_r (needed if overlays are used)
|
||||||
|
|
|
||||||
|
|
@ -3,7 +3,7 @@
|
||||||
|
|
||||||
import os
|
import os
|
||||||
import sys
|
import sys
|
||||||
from sphinx.util.pycompat import execfile_
|
from sphinx.util.osutil import fs_encoding
|
||||||
|
|
||||||
# ------------------------------------------------------------------------------
|
# ------------------------------------------------------------------------------
|
||||||
def loadConfig(namespace):
|
def loadConfig(namespace):
|
||||||
|
|
@ -48,7 +48,9 @@ def loadConfig(namespace):
|
||||||
sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
|
sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
|
||||||
config = namespace.copy()
|
config = namespace.copy()
|
||||||
config['__file__'] = config_file
|
config['__file__'] = config_file
|
||||||
execfile_(config_file, config)
|
with open(config_file, 'rb') as f:
|
||||||
|
code = compile(f.read(), fs_encoding, 'exec')
|
||||||
|
exec(code, config)
|
||||||
del config['__file__']
|
del config['__file__']
|
||||||
namespace.update(config)
|
namespace.update(config)
|
||||||
else:
|
else:
|
||||||
|
|
|
||||||
|
|
@ -427,7 +427,7 @@ int i2c_get_chip_by_phandle(const struct udevice *parent, const char *prop_name,
|
||||||
goto err_exit;
|
goto err_exit;
|
||||||
}
|
}
|
||||||
|
|
||||||
ret = dev_read_u32(parent, "i2cbcdev", &phandle);
|
ret = dev_read_u32(parent, prop_name, &phandle);
|
||||||
if (ret)
|
if (ret)
|
||||||
goto err_exit;
|
goto err_exit;
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -13,6 +13,7 @@
|
||||||
#include <cpu_func.h>
|
#include <cpu_func.h>
|
||||||
#include <net.h>
|
#include <net.h>
|
||||||
#include <malloc.h>
|
#include <malloc.h>
|
||||||
|
#include <wait_bit.h>
|
||||||
#include <asm/byteorder.h>
|
#include <asm/byteorder.h>
|
||||||
#include <asm/cache.h>
|
#include <asm/cache.h>
|
||||||
#include <linux/delay.h>
|
#include <linux/delay.h>
|
||||||
|
|
@ -354,12 +355,49 @@ static int ci_ep_enable(struct usb_ep *ep,
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static int ep_disable(int num, int in)
|
||||||
|
{
|
||||||
|
struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor;
|
||||||
|
unsigned int ep_bit, enable_bit;
|
||||||
|
int err;
|
||||||
|
|
||||||
|
if (in) {
|
||||||
|
ep_bit = EPT_TX(num);
|
||||||
|
enable_bit = CTRL_TXE;
|
||||||
|
} else {
|
||||||
|
ep_bit = EPT_RX(num);
|
||||||
|
enable_bit = CTRL_RXE;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* clear primed buffers */
|
||||||
|
do {
|
||||||
|
writel(ep_bit, &udc->epflush);
|
||||||
|
err = wait_for_bit_le32(&udc->epflush, ep_bit, false, 1000, false);
|
||||||
|
if (err)
|
||||||
|
return err;
|
||||||
|
} while (readl(&udc->epstat) & ep_bit);
|
||||||
|
|
||||||
|
/* clear enable bit */
|
||||||
|
clrbits_le32(&udc->epctrl[num], enable_bit);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
static int ci_ep_disable(struct usb_ep *ep)
|
static int ci_ep_disable(struct usb_ep *ep)
|
||||||
{
|
{
|
||||||
struct ci_ep *ci_ep = container_of(ep, struct ci_ep, ep);
|
struct ci_ep *ci_ep = container_of(ep, struct ci_ep, ep);
|
||||||
|
int num, in, err;
|
||||||
|
|
||||||
|
num = ci_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
|
||||||
|
in = (ci_ep->desc->bEndpointAddress & USB_DIR_IN) != 0;
|
||||||
|
|
||||||
|
err = ep_disable(num, in);
|
||||||
|
if (err)
|
||||||
|
return err;
|
||||||
|
|
||||||
ci_ep->desc = NULL;
|
ci_ep->desc = NULL;
|
||||||
ep->desc = NULL;
|
ep->desc = NULL;
|
||||||
|
ci_ep->req_primed = false;
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -520,7 +520,7 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
|
||||||
cmdbuf[req->actual] = '\0';
|
cmdbuf[req->actual] = '\0';
|
||||||
cmd = fastboot_handle_command(cmdbuf, response);
|
cmd = fastboot_handle_command(cmdbuf, response);
|
||||||
} else {
|
} else {
|
||||||
pr_err("buffer overflow");
|
pr_err("buffer overflow\n");
|
||||||
fastboot_fail("buffer overflow", response);
|
fastboot_fail("buffer overflow", response);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -133,18 +133,20 @@ endif
|
||||||
|
|
||||||
config EFI_VAR_BUF_SIZE
|
config EFI_VAR_BUF_SIZE
|
||||||
int "Memory size of the UEFI variable store"
|
int "Memory size of the UEFI variable store"
|
||||||
default 16384 if EFI_MM_COMM_TEE
|
default 131072
|
||||||
default 65536
|
|
||||||
range 4096 2147483647
|
range 4096 2147483647
|
||||||
help
|
help
|
||||||
This defines the size in bytes of the memory area reserved for keeping
|
This defines the size in bytes of the memory area reserved for keeping
|
||||||
UEFI variables.
|
UEFI variables.
|
||||||
|
|
||||||
When using StandAloneMM (CONFIG_EFI_MM_COMM_TEE=y) this value should
|
When using StandAloneMM (CONFIG_EFI_MM_COMM_TEE=y) is used the
|
||||||
match the value of PcdFlashNvStorageVariableSize used to compile the
|
available size for storing variables is defined in
|
||||||
StandAloneMM module.
|
PcdFlashNvStorageVariableSize.
|
||||||
|
That value is probed at runtime from U-Boot. In that case,
|
||||||
|
EFI_VAR_BUF_SIZE represents the memory U-Boot reserves to present
|
||||||
|
runtime variables to the OS.
|
||||||
|
|
||||||
Minimum 4096, default 65536, or 16384 when using StandAloneMM.
|
Minimum 4096, default 131072
|
||||||
|
|
||||||
config EFI_GET_TIME
|
config EFI_GET_TIME
|
||||||
bool "GetTime() runtime service"
|
bool "GetTime() runtime service"
|
||||||
|
|
|
||||||
|
|
@ -944,8 +944,11 @@ static efi_status_t efi_init_event_log(void)
|
||||||
* Add SCRTM version to the log if previous firmmware
|
* Add SCRTM version to the log if previous firmmware
|
||||||
* doesn't pass an eventlog.
|
* doesn't pass an eventlog.
|
||||||
*/
|
*/
|
||||||
if (!elog.found)
|
if (!elog.found) {
|
||||||
ret = efi_append_scrtm_version(dev);
|
ret = efi_append_scrtm_version(dev);
|
||||||
|
if (ret != EFI_SUCCESS)
|
||||||
|
goto free_pool;
|
||||||
|
}
|
||||||
|
|
||||||
ret = create_final_event();
|
ret = create_final_event();
|
||||||
if (ret != EFI_SUCCESS)
|
if (ret != EFI_SUCCESS)
|
||||||
|
|
|
||||||
|
|
@ -204,8 +204,11 @@ efi_status_t efi_var_restore(struct efi_var_file *buf, bool safe)
|
||||||
* File ubootefi.var is read from the EFI system partitions and the variables
|
* File ubootefi.var is read from the EFI system partitions and the variables
|
||||||
* stored in the file are created.
|
* stored in the file are created.
|
||||||
*
|
*
|
||||||
* In case the file does not exist yet or a variable cannot be set EFI_SUCCESS
|
* On first boot the file ubootefi.var does not exist yet. This is why we must
|
||||||
* is returned.
|
* return EFI_SUCCESS in this case.
|
||||||
|
*
|
||||||
|
* If the variable file is corrupted, e.g. incorrect CRC32, we do not want to
|
||||||
|
* stop the boot process. We deliberately return EFI_SUCCESS in this case, too.
|
||||||
*
|
*
|
||||||
* Return: status code
|
* Return: status code
|
||||||
*/
|
*/
|
||||||
|
|
|
||||||
|
|
@ -147,7 +147,8 @@ static int spkgimage_verify_header(unsigned char *ptr, int size,
|
||||||
|
|
||||||
/* Check the marker bytes */
|
/* Check the marker bytes */
|
||||||
if (memcmp(header->marker, marker, 4)) {
|
if (memcmp(header->marker, marker, 4)) {
|
||||||
fprintf(stderr, "Error: invalid marker bytes\n");
|
if (param->type == IH_TYPE_RENESAS_SPKG)
|
||||||
|
fprintf(stderr, "Error: invalid marker bytes\n");
|
||||||
return -EINVAL;
|
return -EINVAL;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Add table
Reference in a new issue