diff --git a/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso
index 4de29d5d3ff..d56e863ce1c 100644
--- a/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso
@@ -80,7 +80,10 @@
 				  "", "";
 	};
 
-	/* usb5744@2d */
+	hub: usb-hub@2d { /* u36 */
+		compatible = "microchip,usb5744";
+		reg = <0x2d>;
+	};
 };
 
 /* USB 3.0 */
@@ -99,18 +102,6 @@
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 	reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
 	assigned-clock-rates = <250000000>, <20000000>;
-#if 0
-	usbhub0: usb-hub { /* u36 */
-		i2c-bus = <&i2c1>;
-		compatible = "microchip,usb5744";
-		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
-	};
-
-	usb2244: usb-sd { /* u41 */
-		compatible = "microchip,usb2244";
-		reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>;
-	};
-#endif
 };
 
 &dwc3_0 {
@@ -118,6 +109,26 @@
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &gem1 { /* mdio mio50/51 */
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
index 6349a0e1087..9d0c0c2885d 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
@@ -105,11 +105,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+			hub_1: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
 		};
 		usbhub_i2c1: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+			hub_2: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
 		};
 		/* Bus 2/3 are not connected */
 	};
@@ -145,18 +153,6 @@
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 	reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
 	assigned-clock-rates = <250000000>, <20000000>;
-#if 0
-	usbhub0: usb-hub { /* u43 */
-		i2c-bus = <&usbhub_i2c0>;
-		compatible = "microchip,usb5744";
-		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
-	};
-
-	usb2244: usb-sd { /* u38 */
-		compatible = "microchip,usb2244";
-		reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>;
-	};
-#endif
 };
 
 &dwc3_0 {
@@ -164,6 +160,26 @@
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &usb1 { /* mio64 - mio75 */
@@ -174,13 +190,6 @@
 	phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
 	reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
 	assigned-clock-rates = <250000000>, <20000000>;
-#if 0
-	usbhub1: usb-hub { /* u84 */
-		i2c-bus = <&usbhub_i2c1>;
-		compatible = "microchip,usb5744";
-		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
-	};
-#endif
 };
 
 &dwc3_1 {
@@ -188,6 +197,26 @@
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub1_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub1_3_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub1_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub1_2_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &gem0 { /* mdio mio50/51 */
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
index b0d737d3caf..0d915d496ca 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
@@ -117,11 +117,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+			hub_1: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
 		};
 		usbhub_i2c1: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+			hub_2: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
 		};
 		/* Bus 2/3 are not connected */
 	};
@@ -165,18 +173,6 @@
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 	reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
 	assigned-clock-rates = <250000000>, <20000000>;
-#if 0
-	usbhub0: usb-hub { /* u43 */
-		i2c-bus = <&usbhub_i2c0>;
-		compatible = "microchip,usb5744";
-		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
-	};
-
-	usb2244: usb-sd { /* u38 */
-		compatible = "microchip,usb2244";
-		reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>;
-	};
-#endif
 };
 
 &dwc3_0 {
@@ -184,6 +180,26 @@
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &usb1 { /* mio64 - mio75 */
@@ -194,14 +210,6 @@
 	phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
 	reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
 	assigned-clock-rates = <250000000>, <20000000>;
-
-#if 0
-	usbhub1: usb-hub { /* u84 */
-		i2c-bus = <&usbhub_i2c1>;
-		compatible = "microchip,usb5744";
-		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
-	};
-#endif
 };
 
 &dwc3_1 {
@@ -209,6 +217,26 @@
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub1_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub1_3_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub1_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub1_2_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &gem0 { /* mdio mio50/51 */
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
index 561b546e37f..a98a888d138 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
@@ -129,12 +129,6 @@
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	phy-names = "usb3-phy";
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
-#if 0
-	usbhub: usb5744 { /* u43 */
-		compatible = "microchip,usb5744";
-		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-	};
-#endif
 };
 
 &dwc3_0 {
@@ -142,6 +136,24 @@
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &sdhci1 { /* on CC with tuned parameters */
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
index 64683e0ccbb..7490efea98b 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
@@ -92,7 +92,10 @@
 		label = "ina260-u14";
 		reg = <0x40>;
 	};
-	/* u43 - 0x2d - USB hub */
+	hub: usb-hub@2d {
+		compatible = "microchip,usb5744";
+		reg = <0x2d>;
+	};
 	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
 };
 
@@ -131,14 +134,6 @@
 	phy-names = "usb3-phy";
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
 	assigned-clock-rates = <250000000>, <20000000>;
-#if 0
-	usb5744: usb-hub { /* u43 */
-		status = "okay";
-		compatible = "microchip,usb5744";
-		i2c-bus = <&i2c1>;
-		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-	};
-#endif
 };
 
 &dwc3_0 {
@@ -146,6 +141,26 @@
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &sdhci1 { /* on CC with tuned parameters */