Djam/u-boot
1
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2025-04-11 07:24:46 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

tqma6_mba6: Remove UART board code

Browse source 
With DM_SERIAL in place, there is no need to setup the UART pins
in the board code.

The UART pins are setup via devicetree, thanks to DM.

Remove the unneeded code.

Signed-off-by: Fabio Estevam <festevam@denx.de>
This commit is contained in:
Fabio Estevam 2024-08-14 15:28:45 -03:00 • committed by Fabio Estevam
parent 2798e4a5b4
commit 3c72b81200
2 changed files with 16 additions and 16 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

16
arch/arm/dts/imx6qdl-mba6-u-boot.dtsi
View file

@ -10,6 +10,22 @@
};
};
&aips2 {
bootph-all;
};
&pinctrl_uart2 {
bootph-all;
};
&soc {
bootph-all;
};
&uart2 {
bootph-all;
};
&wdog1 {
bootph-pre-ram;
};

16
board/tq/tqma6/tqma6_mba6.c
View file

@ -31,9 +31,6 @@
#include "tqma6_bb.h"
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#if defined(CONFIG_TQMA6Q)
#define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII 0x02e0790
@ -70,17 +67,6 @@ static void mba6_setup_iomuxc_enet(void)
(void *)IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII);
}
static iomux_v3_cfg_t const mba6_uart2_pads[] = {
NEW_PAD_CTRL(MX6_PAD_SD4_DAT4__UART2_RX_DATA, UART_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD4_DAT7__UART2_TX_DATA, UART_PAD_CTRL),
};
static void mba6_setup_iomuxc_uart(void)
{
imx_iomux_v3_setup_multiple_pads(mba6_uart2_pads,
ARRAY_SIZE(mba6_uart2_pads));
}
int board_mmc_get_env_dev(int devno)
{
/*
@ -140,8 +126,6 @@ int board_phy_config(struct phy_device *phydev)
int tqma6_bb_board_early_init_f(void)
{
mba6_setup_iomuxc_uart();
return 0;
}