Djam/u-boot
1
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2025-04-16 09:54:35 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

board: htc: endeavoru: simplify RCM hook

Browse source 
Use SPL GPIO functions to simplify RCM hook on HTC One X.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
This commit is contained in:
Svyatoslav Ryhel 2024-08-09 21:27:58 +03:00
parent 37f85ab4ae
commit 1f7a575615
1 changed files with 39 additions and 52 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

91
board/htc/endeavoru/endeavoru-spl.c
View file

@ -9,13 +9,12 @@
* Svyatoslav Ryhel <clamor95@gmail.com>
*/
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/board.h>
#include <asm/arch-tegra/pmc.h>
#include <asm/arch-tegra/tegra_i2c.h>
#include <spl_gpio.h>
#include <linux/delay.h>
/*
@ -35,10 +34,47 @@
#define TPS80032_SMPS1_CFG_STATE_DATA (0x0100 | TPS80032_SMPS1_CFG_STATE_REG)
#define TPS80032_SMPS2_CFG_STATE_DATA (0x0100 | TPS80032_SMPS2_CFG_STATE_REG)
#define TEGRA_GPIO_PS0 144
/*
* Unlike all other supported Tegra devices and most known Tegra devices, the
* HTC One X has no hardware way to enter APX/RCM mode, which may lead to a
* dangerous situation when, if BCT is set correctly and the bootloader is
* faulty, the device will hang in a permanent brick state. Exiting from this
* state can be done only by disassembling the device and shortening testpad
* to the ground.
*
* To prevent this or to minimize the probability of such an accident, it was
* proposed to add the RCM rebooting hook as early into SPL as possible since
* SPL is much more robust and has minimal changes that can break bootflow.
*
* pmic_enable_cpu_vdd() function was chosen as it is the earliest function
* exposed for setup by the device. Hook performs a check for volume up
* button state and triggers RCM if it is pressed.
*/
void apx_hook(void)
{
int value;
/* Configure pinmux */
pinmux_set_func(PMUX_PINGRP_KB_ROW8_PS0, PMUX_FUNC_KBC);
pinmux_set_pullupdown(PMUX_PINGRP_KB_ROW8_PS0, PMUX_PULL_UP);
pinmux_tristate_disable(PMUX_PINGRP_KB_ROW8_PS0);
pinmux_set_io(PMUX_PINGRP_KB_ROW8_PS0, PMUX_PIN_INPUT);
spl_gpio_input(NULL, TEGRA_GPIO(S, 0));
value = spl_gpio_get_value(NULL, TEGRA_GPIO(S, 0));
/* Enter RCM if button is pressed */
if (!value) {
tegra_pmc_writel(2, PMC_SCRATCH0);
tegra_pmc_writel(PMC_CNTRL_MAIN_RST, PMC_CNTRL);
}
}
void pmic_enable_cpu_vdd(void)
{
/* Check if RCM request is active */
apx_hook();
/* Set VDD_CORE to 1.200V. */
tegra_i2c_ll_write(TPS80032_DVS_I2C_ADDR, TPS80032_SMPS2_CFG_VOLTAGE_DATA);
udelay(1000);
@ -52,52 +88,3 @@ void pmic_enable_cpu_vdd(void)
tegra_i2c_ll_write(TPS80032_CTL1_I2C_ADDR, TPS80032_SMPS1_CFG_STATE_DATA);
udelay(10 * 1000);
}
/*
* Unlike all other supported Tegra devices and most known Tegra devices, the
* HTC One X has no hardware way to enter APX/RCM mode, which may lead to a
* dangerous situation when, if BCT is set correctly and the bootloader is
* faulty, the device will hang in a permanent brick state. Exiting from this
* state can be done only by disassembling the device and shortening testpad
* to the ground.
*
* To prevent this or to minimize the probability of such an accident, it was
* proposed to add the RCM rebooting hook as early into SPL as possible since
* SPL is much more robust and has minimal changes that can break bootflow.
*
* gpio_early_init_uart() function was chosen as it is the earliest function
* exposed for setup by the device. Hook performs a check for volume up
* button state and triggers RCM if it is pressed.
*/
void gpio_early_init_uart(void)
{
struct gpio_ctlr *ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE;
struct gpio_ctlr_bank *bank = &ctlr->gpio_bank[GPIO_BANK(TEGRA_GPIO_PS0)];
u32 value;
/* Configure pinmux */
pinmux_set_func(PMUX_PINGRP_KB_ROW8_PS0, PMUX_FUNC_KBC);
pinmux_set_pullupdown(PMUX_PINGRP_KB_ROW8_PS0, PMUX_PULL_UP);
pinmux_tristate_disable(PMUX_PINGRP_KB_ROW8_PS0);
pinmux_set_io(PMUX_PINGRP_KB_ROW8_PS0, PMUX_PIN_INPUT);
/* Configure GPIO direction as input. */
value = readl(&bank->gpio_dir_out[GPIO_PORT(TEGRA_GPIO_PS0)]);
value &= ~(1 << GPIO_BIT(TEGRA_GPIO_PS0));
writel(value, &bank->gpio_dir_out[GPIO_PORT(TEGRA_GPIO_PS0)]);
/* Enable the pin as a GPIO */
value = readl(&bank->gpio_config[GPIO_PORT(TEGRA_GPIO_PS0)]);
value |= 1 << GPIO_BIT(TEGRA_GPIO_PS0);
writel(value, &bank->gpio_config[GPIO_PORT(TEGRA_GPIO_PS0)]);
/* Get GPIO value */
value = readl(&bank->gpio_in[GPIO_PORT(TEGRA_GPIO_PS0)]);
value = (value >> GPIO_BIT(TEGRA_GPIO_PS0)) & 1;
/* Enter RCM if button is pressed */
if (!value) {
tegra_pmc_writel(2, PMC_SCRATCH0);
tegra_pmc_writel(PMC_CNTRL_MAIN_RST, PMC_CNTRL);
}
}