Djam/u-boot
1
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2025-04-19 19:34:35 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

rockchip: Migrate to use DM_USB_GADGET on RK3328

Browse source 
USB gadget is not working fully as expected on RK3328, it uses a
board_usb_init() function to initialize the DWC2 OTG port.

The board_usb_init() function does not intgrate with the generic phy
framework and as a result the USB phy is not properly configured before
or after USB gadget use.

Having both USB_DWC2 and DWC2_OTG enabled for the same board is also
causing some issues.

Trying to use rockusb or ums command after usb stop result in a freeze
due to usb stop is putting the phy in a suspended state.

  => usb start
  => usb stop
  => ums 0 mmc 0
  --> freeze due to usb phy is suspended <--

Fix this by only using one of USB_DWC2 (host) or DWC2_OTG (peripheral)
depending on the most likely usage of the otg port and by migrating to
use DM_USB_GADGET instead of a board_usb_init() function.

The nanopi-r2 and orangepi-r1-plus variants share OTG and power using a
Type-C connector, mark these boards dr_mode as peripheral, the most
likely usage is for recovery and image download.

The rock64 and roc-cc currently use dr_mode as host, remove the DWC2_OTG
driver from these boards to ensure that the USB_DWC2 driver is used.

The rock-pi-e board does not enable the usb20_otg node so both USB_DWC2
and DWC2_OTG is removed from this board.

Enable RockUSB and UMS on all boards with a otg port in peripheral mode.

Also with the migration to DM_USB_GADGET completed the U-Boot specific
change to reorder usb nodes in the soc device tree can be reverted.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jonas Karlman 2024-03-10 18:51:00 +00:00 • committed by Kever Yang
parent 2b6a013caf
commit 1bc4e8eb1d
17 changed files with 75 additions and 61 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
View file

@ -15,6 +15,10 @@
bootph-all; bootph-all;
}; };
&usb20_otg {
dr_mode = "peripheral";
};
&vcc_io_sdio { &vcc_io_sdio {
bootph-pre-ram; bootph-pre-ram;
}; };

4
arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi
View file

@ -33,6 +33,10 @@
bootph-pre-ram; bootph-pre-ram;
}; };
&usb20_otg {
dr_mode = "peripheral";
};
&vcc_sd { &vcc_sd {
bootph-pre-ram; bootph-pre-ram;
}; };

4
arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi
View file

@ -33,6 +33,10 @@
bootph-pre-ram; bootph-pre-ram;
}; };
&usb20_otg {
dr_mode = "peripheral";
};
&vcc_sd { &vcc_sd {
bootph-pre-ram; bootph-pre-ram;
}; };

4
arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
View file

@ -29,6 +29,10 @@
}; };
}; };
&usb20_otg {
hnp-srp-disable;
};
&vcc_sd { &vcc_sd {
bootph-pre-ram; bootph-pre-ram;
}; };

9
arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
View file

@ -29,6 +29,15 @@
}; };
}; };
&u2phy_host {
phy-supply = <&vcc_host_5v>;
};
&vcc_host_5v {
/delete-property/ regulator-always-on;
/delete-property/ regulator-boot-on;
};
&vcc_sd { &vcc_sd {
bootph-pre-ram; bootph-pre-ram;
}; };

4
arch/arm/dts/rk3328-rock64-u-boot.dtsi
View file

@ -55,6 +55,10 @@
bootph-pre-ram; bootph-pre-ram;
}; };
&usb20_otg {
hnp-srp-disable;
};
&vcc_sd { &vcc_sd {
bootph-pre-ram; bootph-pre-ram;
}; };

4
arch/arm/dts/rk3328-u-boot.dtsi
View file

@ -130,10 +130,6 @@
bootph-all; bootph-all;
}; };
&usb20_otg {
hnp-srp-disable;
};
#ifdef CONFIG_ROCKCHIP_SPI_IMAGE #ifdef CONFIG_ROCKCHIP_SPI_IMAGE
&binman { &binman {
simple-bin-spi { simple-bin-spi {

41
arch/arm/dts/rk3328.dtsi
View file

@ -965,6 +965,22 @@
}; };
}; };
usb20_otg: usb@ff580000 {
compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb",
"snps,dwc2";
reg = <0x0 0xff580000 0x0 0x40000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG>;
clock-names = "otg";
dr_mode = "otg";
g-np-tx-fifo-size = <16>;
g-rx-fifo-size = <280>;
g-tx-fifo-size = <256 128 128 64 32 16>;
phys = <&u2phy_otg>;
phy-names = "usb2-phy";
status = "disabled";
};
usb_host0_ehci: usb@ff5c0000 { usb_host0_ehci: usb@ff5c0000 {
compatible = "generic-ehci"; compatible = "generic-ehci";
reg = <0x0 0xff5c0000 0x0 0x10000>; reg = <0x0 0xff5c0000 0x0 0x10000>;
@ -1004,31 +1020,6 @@
status = "disabled"; status = "disabled";
}; };
/*
* U-Boot Specific Change
*
* The OTG controller must come after the USB host pair for it
* to work. This is likely due to lack of support for the USB
* PHYs. This must be manually changed after each device tree
* sync. There is no clean way to handle this in -u-boot.dtsi
* files.
*/
usb20_otg: usb@ff580000 {
compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb",
"snps,dwc2";
reg = <0x0 0xff580000 0x0 0x40000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG>;
clock-names = "otg";
dr_mode = "otg";
g-np-tx-fifo-size = <16>;
g-rx-fifo-size = <280>;
g-tx-fifo-size = <256 128 128 64 32 16>;
phys = <&u2phy_otg>;
phy-names = "usb2-phy";
status = "disabled";
};
gic: interrupt-controller@ff811000 { gic: interrupt-controller@ff811000 {
compatible = "arm,gic-400"; compatible = "arm,gic-400";
#interrupt-cells = <3>; #interrupt-cells = <3>;

7
configs/evb-rk3328_defconfig
View file

@ -31,6 +31,8 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y CONFIG_CMD_USB=y
CONFIG_CMD_ROCKUSB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y CONFIG_CMD_TIME=y
CONFIG_CMD_REGULATOR=y CONFIG_CMD_REGULATOR=y
@ -83,17 +85,18 @@ CONFIG_SYSINFO=y
CONFIG_SYSRESET=y CONFIG_SYSRESET=y
# CONFIG_TPL_SYSRESET is not set # CONFIG_TPL_SYSRESET is not set
CONFIG_USB=y CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC2=y
CONFIG_USB_DWC3=y CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set # CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_GADGET=y CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_FUNCTION_ROCKUSB=y
CONFIG_SPL_TINY_MEMSET=y CONFIG_SPL_TINY_MEMSET=y
CONFIG_TPL_TINY_MEMSET=y CONFIG_TPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y CONFIG_ERRNO_STR=y

7
configs/nanopi-r2c-plus-rk3328_defconfig
View file

@ -33,6 +33,8 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y CONFIG_CMD_USB=y
CONFIG_CMD_ROCKUSB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y CONFIG_CMD_TIME=y
CONFIG_CMD_REGULATOR=y CONFIG_CMD_REGULATOR=y
@ -90,17 +92,18 @@ CONFIG_SYSINFO=y
CONFIG_SYSRESET=y CONFIG_SYSRESET=y
# CONFIG_TPL_SYSRESET is not set # CONFIG_TPL_SYSRESET is not set
CONFIG_USB=y CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC2=y
CONFIG_USB_DWC3=y CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set # CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_GADGET=y CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_FUNCTION_ROCKUSB=y
CONFIG_SPL_TINY_MEMSET=y CONFIG_SPL_TINY_MEMSET=y
CONFIG_TPL_TINY_MEMSET=y CONFIG_TPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y CONFIG_ERRNO_STR=y

7
configs/nanopi-r2c-rk3328_defconfig
View file

@ -33,6 +33,8 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y CONFIG_CMD_USB=y
CONFIG_CMD_ROCKUSB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y CONFIG_CMD_TIME=y
CONFIG_CMD_REGULATOR=y CONFIG_CMD_REGULATOR=y
@ -90,17 +92,18 @@ CONFIG_SYSINFO=y
CONFIG_SYSRESET=y CONFIG_SYSRESET=y
# CONFIG_TPL_SYSRESET is not set # CONFIG_TPL_SYSRESET is not set
CONFIG_USB=y CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC2=y
CONFIG_USB_DWC3=y CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set # CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_GADGET=y CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_FUNCTION_ROCKUSB=y
CONFIG_SPL_TINY_MEMSET=y CONFIG_SPL_TINY_MEMSET=y
CONFIG_TPL_TINY_MEMSET=y CONFIG_TPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y CONFIG_ERRNO_STR=y

7
configs/nanopi-r2s-rk3328_defconfig
View file

@ -33,6 +33,8 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y CONFIG_CMD_USB=y
CONFIG_CMD_ROCKUSB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y CONFIG_CMD_TIME=y
CONFIG_CMD_REGULATOR=y CONFIG_CMD_REGULATOR=y
@ -90,17 +92,18 @@ CONFIG_SYSINFO=y
CONFIG_SYSRESET=y CONFIG_SYSRESET=y
# CONFIG_TPL_SYSRESET is not set # CONFIG_TPL_SYSRESET is not set
CONFIG_USB=y CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC2=y
CONFIG_USB_DWC3=y CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set # CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_GADGET=y CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_FUNCTION_ROCKUSB=y
CONFIG_SPL_TINY_MEMSET=y CONFIG_SPL_TINY_MEMSET=y
CONFIG_TPL_TINY_MEMSET=y CONFIG_TPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y CONFIG_ERRNO_STR=y

7
configs/orangepi-r1-plus-lts-rk3328_defconfig
View file

@ -38,6 +38,8 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y CONFIG_CMD_USB=y
CONFIG_CMD_ROCKUSB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y CONFIG_CMD_TIME=y
CONFIG_CMD_REGULATOR=y CONFIG_CMD_REGULATOR=y
@ -100,17 +102,18 @@ CONFIG_SYSINFO=y
CONFIG_SYSRESET=y CONFIG_SYSRESET=y
# CONFIG_TPL_SYSRESET is not set # CONFIG_TPL_SYSRESET is not set
CONFIG_USB=y CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC2=y
CONFIG_USB_DWC3=y CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set # CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_GADGET=y CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_FUNCTION_ROCKUSB=y
CONFIG_SPL_TINY_MEMSET=y CONFIG_SPL_TINY_MEMSET=y
CONFIG_TPL_TINY_MEMSET=y CONFIG_TPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y CONFIG_ERRNO_STR=y

7
configs/orangepi-r1-plus-rk3328_defconfig
View file

@ -38,6 +38,8 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y CONFIG_CMD_USB=y
CONFIG_CMD_ROCKUSB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y CONFIG_CMD_TIME=y
CONFIG_CMD_REGULATOR=y CONFIG_CMD_REGULATOR=y
@ -100,17 +102,18 @@ CONFIG_SYSINFO=y
CONFIG_SYSRESET=y CONFIG_SYSRESET=y
# CONFIG_TPL_SYSRESET is not set # CONFIG_TPL_SYSRESET is not set
CONFIG_USB=y CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC2=y
CONFIG_USB_DWC3=y CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set # CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_GADGET=y CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_FUNCTION_ROCKUSB=y
CONFIG_SPL_TINY_MEMSET=y CONFIG_SPL_TINY_MEMSET=y
CONFIG_TPL_TINY_MEMSET=y CONFIG_TPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y CONFIG_ERRNO_STR=y

7
configs/roc-cc-rk3328_defconfig
View file

@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_BASE=0xFF130000
CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART=y
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y CONFIG_FIT_VERBOSE=y
CONFIG_SPL_FIT_SIGNATURE=y CONFIG_SPL_FIT_SIGNATURE=y
@ -34,7 +33,6 @@ CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y CONFIG_CMD_MMC=y
CONFIG_CMD_POWEROFF=y CONFIG_CMD_POWEROFF=y
CONFIG_CMD_USB=y CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y CONFIG_CMD_TIME=y
CONFIG_CMD_REGULATOR=y CONFIG_CMD_REGULATOR=y
@ -55,8 +53,6 @@ CONFIG_SPL_SYSCON=y
CONFIG_TPL_SYSCON=y CONFIG_TPL_SYSCON=y
CONFIG_CLK=y CONFIG_CLK=y
CONFIG_SPL_CLK=y CONFIG_SPL_CLK=y
CONFIG_FASTBOOT_BUF_ADDR=0x800800
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_ROCKCHIP_GPIO=y CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y CONFIG_MMC_DW=y
@ -97,10 +93,7 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC2=y CONFIG_USB_DWC2=y
CONFIG_USB_DWC3=y CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_SPL_TINY_MEMSET=y CONFIG_SPL_TINY_MEMSET=y
CONFIG_TPL_TINY_MEMSET=y CONFIG_TPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y CONFIG_ERRNO_STR=y

7
configs/rock-pi-e-rk3328_defconfig
View file

@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_BASE=0xFF130000
CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART=y
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y CONFIG_FIT_VERBOSE=y
CONFIG_SPL_FIT_SIGNATURE=y CONFIG_SPL_FIT_SIGNATURE=y
@ -52,8 +51,6 @@ CONFIG_SPL_SYSCON=y
CONFIG_TPL_SYSCON=y CONFIG_TPL_SYSCON=y
CONFIG_CLK=y CONFIG_CLK=y
CONFIG_SPL_CLK=y CONFIG_SPL_CLK=y
CONFIG_FASTBOOT_BUF_ADDR=0x800800
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_ROCKCHIP_GPIO=y CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y CONFIG_MMC_DW=y
@ -92,12 +89,8 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC2=y
CONFIG_USB_DWC3=y CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_SPL_TINY_MEMSET=y CONFIG_SPL_TINY_MEMSET=y
CONFIG_TPL_TINY_MEMSET=y CONFIG_TPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y CONFIG_ERRNO_STR=y

6
configs/rock64-rk3328_defconfig
View file

@ -16,7 +16,6 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART=y
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y CONFIG_FIT_VERBOSE=y
CONFIG_SPL_FIT_SIGNATURE=y CONFIG_SPL_FIT_SIGNATURE=y
@ -59,8 +58,6 @@ CONFIG_SPL_SYSCON=y
CONFIG_TPL_SYSCON=y CONFIG_TPL_SYSCON=y
CONFIG_CLK=y CONFIG_CLK=y
CONFIG_SPL_CLK=y CONFIG_SPL_CLK=y
CONFIG_FASTBOOT_BUF_ADDR=0x800800
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_ROCKCHIP_GPIO=y CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y CONFIG_MMC_DW=y
@ -106,10 +103,7 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC2=y CONFIG_USB_DWC2=y
CONFIG_USB_DWC3=y CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_SPL_TINY_MEMSET=y CONFIG_SPL_TINY_MEMSET=y
CONFIG_TPL_TINY_MEMSET=y CONFIG_TPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y CONFIG_ERRNO_STR=y