treewide: Tidy up semicolon after command macros

The U_BOOT_CMD_COMPLETE() macro has a semicolon at the end, perhaps
inadvertently. Some code has taken advantage of this.

Tidy this up by dropping the semicolon from the macro and adding it to
macro invocations as required.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

board/freescale/common/vid.c

@@ -793,4 +793,4 @@ U_BOOT_CMD(
 	vdd_read, 1, 0, do_vdd_read,
 	"read VDD",
 	" - Read the voltage specified in mV"
-)
+);

board/xilinx/common/fru.c

@@ -85,4 +85,4 @@ U_BOOT_CMD(
 	fru, 8, 1, do_fru,
 	"FRU table info",
 	fru_help_text
-)
+);

board/xilinx/versal/cmds.c

@@ -98,4 +98,4 @@ U_BOOT_LONGHELP(versal,
 U_BOOT_CMD(versal, 4, 1, do_versal,
 	   "versal sub-system",
 	   versal_help_text
-)
+);

board/xilinx/zynqmp/cmds.c

@@ -427,4 +427,4 @@ U_BOOT_CMD(
 	zynqmp, 9, 1, do_zynqmp,
 	"ZynqMP sub-system",
 	zynqmp_help_text
-)
+);

cmd/btrfs.c

@@ -24,4 +24,4 @@ U_BOOT_CMD(btrsubvol, 3, 1, do_btrsubvol,
 	"list subvolumes of a BTRFS filesystem",
 	"<interface> <dev[:part]>\n"
 	"     - List subvolumes of a BTRFS filesystem."
-)
+);

cmd/eeprom.c

@@ -435,4 +435,4 @@ U_BOOT_CMD(
 	"The values which can be provided with the -l option are:\n"
 	CONFIG_EEPROM_LAYOUT_HELP_STRING"\n"
 #endif
-)
+);

cmd/ext2.c

@@ -42,7 +42,7 @@ U_BOOT_CMD(
 	"list files in a directory (default /)",
 	"<interface> <dev[:part]> [directory]\n"
 	"    - list files from 'dev' on 'interface' in a 'directory'"
-)
+);
 
 U_BOOT_CMD(
 	ext2load,	6,	0,	do_ext2load,
@@ -50,4 +50,4 @@ U_BOOT_CMD(
 	"<interface> [<dev[:part]> [addr [filename [bytes [pos]]]]]\n"
 	"    - load binary file 'filename' from 'dev' on 'interface'\n"
 	"      to address 'addr' from ext2 filesystem."
-)
+);

cmd/fs.c

@@ -39,7 +39,7 @@ U_BOOT_CMD(
 	"      If 'bytes' is 0 or omitted, the file is read until the end.\n"
 	"      'pos' gives the file byte position to start reading from.\n"
 	"      If 'pos' is 0 or omitted, the file is read from the start."
-)
+);
 
 static int do_save_wrapper(struct cmd_tbl *cmdtp, int flag, int argc,
 			   char *const argv[])
@@ -56,7 +56,7 @@ U_BOOT_CMD(
 	"      'bytes' gives the size to save in bytes and is mandatory.\n"
 	"      'pos' gives the file byte position to start writing to.\n"
 	"      If 'pos' is 0 or omitted, the file is written from the start."
-)
+);
 
 static int do_ls_wrapper(struct cmd_tbl *cmdtp, int flag, int argc,
 			 char *const argv[])
@@ -70,7 +70,7 @@ U_BOOT_CMD(
 	"<interface> [<dev[:part]> [directory]]\n"
 	"    - List files in directory 'directory' of partition 'part' on\n"
 	"      device type 'interface' instance 'dev'."
-)
+);
 
 static int do_ln_wrapper(struct cmd_tbl *cmdtp, int flag, int argc,
 			 char *const argv[])
@@ -84,7 +84,7 @@ U_BOOT_CMD(
 	"<interface> <dev[:part]> target linkname\n"
 	"    - create a symbolic link to 'target' with the name 'linkname' on\n"
 	"      device type 'interface' instance 'dev'."
-)
+);
 
 static int do_fstype_wrapper(struct cmd_tbl *cmdtp, int flag, int argc,
 			     char *const argv[])

cmd/pinmux.c

@@ -178,4 +178,4 @@ U_BOOT_CMD(pinmux, CONFIG_SYS_MAXARGS, 1, do_pinmux,
 	   "list                     - list UCLASS_PINCTRL devices\n"
 	   "pinmux dev [pincontroller-name] - select pin-controller device\n"
 	   "pinmux status [-a | pin-name]   - print pin-controller muxing [for all | for pin-name]\n"
-)
+);

cmd/qfw.c

@@ -121,4 +121,4 @@ U_BOOT_CMD(
 	"    - list                             : print firmware(s) currently loaded\n"
 	"    - cpus                             : print online cpu number\n"
 	"    - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
-)
+);

include/command.h

@@ -390,7 +390,7 @@ int cmd_source_script(ulong addr, const char *fit_uname, const char *confname);
 #define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \
 	ll_entry_declare(struct cmd_tbl, _name, cmd) =			\
 		U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd,	\
-						_usage, _help, _comp);
+						_usage, _help, _comp)
 
 #define U_BOOT_CMDREP_COMPLETE(_name, _maxargs, _cmd_rep, _usage,	\
 			       _help, _comp)				\